RESUMO
Lignocellulosic biomass is considered as a sustainable source of energy and chemicals, but its recalcitrance to bioconversion still limits its use. In this paper, a strategy based on two aspects was developed to improve our knowledge on the lignin recalcitrance to enzymatic hydrolysis. First, lignocellulosic films of cellulose nanofibrils (CNFs) with increasing content of lignin (up to 40%) were prepared. Thanks to in situ real time Atomic Force Microscopy (AFM) measurements during the hydrolysis and by comparison with biochemical assays, the use of such films allows to fully assess the importance of the lignin content and of the arrangement between CNFs and lignin on the hydrolysis efficiency. In a second time, contrary to other studies by AFM which only followed a specific structure during enzymatic processes mostly on simple systems (CNFs or cellulose nanocrystals), a quantitative analysis of in-situ time-lapse measurements was developed. It enables to accurately address lignocellulosic biomass recalcitrance mechanisms mediated by lignin at nanoscale. Such analysis could pave the way for the use of a quantitative criteria to visualize in situ deconstruction of complex lignocellulosic substrates. Coupling the use of lignocellulosic films and dynamical AFM quantitative analysis to follow the evolution of the structure at nanoscale might lead to an effective targeting of new promising bioconversion strategies.
Assuntos
Lignina/química , Nanofibras/química , Hidrólise , Lignina/ultraestrutura , Microscopia de Força Atômica , Nanofibras/ultraestruturaRESUMO
Lignocellulose-acting enzymes play a central role in the biorefinery of plant biomass to make fuels, chemicals and materials. These enzymes are often appended to carbohydrate binding modules (CBMs) that promote substrate targeting. When used in plant materials, which are complex assemblies of polymers, the binding properties of CBMs can be difficult to understand and predict, thus limiting the efficiency of enzymes. In order to gain more information on the binding properties of CBMs, some bioinspired model assemblies that contain some of the polymers and covalent interactions found in the plant cell walls have been designed. The mobility of three engineered CBMs has been investigated by FRAP in these assemblies, while varying the parameters related to the polymer concentration, the physical state of assemblies and the oligomerization state of CBMs. The features controlling the mobility of the CBMs in the assemblies have been quantified and hierarchized. We demonstrate that the parameters can have additional or opposite effects on mobility, depending on the CBM tested. We also find evidence of a relationship between the mobility of CBMs and their binding strength. Overall, bioinspired assemblies are able to reveal the unique features of affinity of CBMs. In particular, the results show that oligomerization of CBMs and the presence of ferulic acid motifs in the assemblies play an important role in the binding affinity of CBMs. Thus we propose that these features should be finely tuned when CBMs are used in plant cell walls to optimise bioprocesses.
Assuntos
Parede Celular/química , Parede Celular/metabolismo , Células Vegetais/metabolismo , Polímeros/química , Sequência de Aminoácidos , Arabinose/química , Metabolismo dos Carboidratos , Fluoresceína-5-Isotiocianato/química , Recuperação de Fluorescência Após Fotodegradação , Corantes Fluorescentes/química , Modelos Moleculares , Dados de Sequência Molecular , Células Vegetais/química , Polímeros/metabolismo , Xilose/químicaRESUMO
Plant biomass is a potential resource of chemicals, new materials and biofuels that could reduce our dependency on fossil carbon, thus decreasing the greenhouse effect. However, due to its chemical and structural complexity, plant biomass is recalcitrant to green biological transformation by enzymes, preventing the establishment of integrated bio-refineries. In order to gain more knowledge in the architecture of plant cell wall to facilitate their deconstruction, many fluorescent probes bearing various fluorophores have been devised and used successfully to reveal the changes in structural motifs during plant biomass deconstruction, and the molecular interactions between enzymes and plant cell wall polymers. Fluorescent probes are thus relevant tools to explore plant cell wall deconstruction.
Assuntos
Parede Celular/química , Corantes Fluorescentes/química , Biocatálise , Parede Celular/ultraestrutura , Celulases/química , Conservação de Recursos Energéticos , Recuperação de Fluorescência Após Fotodegradação , Transferência Ressonante de Energia de Fluorescência , Proteínas de Fluorescência Verde/química , Lignina/química , Células Vegetais/química , Células Vegetais/ultraestrutura , Energia Renovável , Coloração e RotulagemRESUMO
Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that oxidatively cleave recalcitrant polysaccharides such as cellulose. Several studies have reported LPMO action in synergy with other carbohydrate-active enzymes (CAZymes) for the degradation of lignocellulosic biomass but direct LPMO action at the plant tissue level remains challenging to investigate. Here, we have developed a MALDI-MS imaging workflow to detect oxidised oligosaccharides released by a cellulose-active LPMO at cellular level on maize tissues. Using this workflow, we imaged LPMO action and gained insight into the spatial variation and relative abundance of oxidised and non-oxidised oligosaccharides. We reveal a targeted action of the LPMO related to the composition and organisation of plant cell walls.
Assuntos
Oxigenases de Função Mista , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz , Zea mays , Zea mays/química , Oxigenases de Função Mista/metabolismo , Oxigenases de Função Mista/química , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Celulose/química , Celulose/metabolismo , Parede Celular/química , Parede Celular/metabolismo , Oligossacarídeos/química , Oligossacarídeos/metabolismo , Lignina/química , Lignina/metabolismo , Oxirredução , Polissacarídeos/química , Polissacarídeos/metabolismo , Proteínas de Plantas/química , Proteínas de Plantas/metabolismoRESUMO
Progression of enzymes in lignocellulosic biomass is a crucial parameter in biorefinery processes, and it appears to be one of the limiting factors in optimizing lignocellulose degradation. In order to assay the importance of the chemical and structural features of the substrate matrix on enzyme mobility, we have designed bioinspired model assemblies of secondary plant cell walls, which have been used to measure the mobility of fluorescent probes while modifying different parameters (probe size, water content, polysaccharide concentration). The results were used to construct a model of probe mobility and to rank the parameters in order of importance. Water content and probe size were shown to have the greatest effect. Although these assemblies are simplified templates of the plant cell walls, our strategy paves the way for proposing new approaches for optimizing biomass saccharification, such as selecting enzymes with suitable properties.
Assuntos
Materiais Biocompatíveis/química , Corantes Fluorescentes/química , Lignina/metabolismo , Biocombustíveis , Parede Celular/química , Parede Celular/metabolismo , Enzimas/química , Lignina/química , Teste de Materiais , Microscopia de Força Atômica , Microscopia Confocal , Plantas/química , Plantas/metabolismo , ÁguaRESUMO
The interactions of proteins involved in plant cell wall hydrolysis, such as enzymes and CBMs, significantly determine their role and efficiency. In order to go beyond the characterization of interactions with simple ligands, bioinspired assemblies combined with the measurement of diffusion and interaction by FRAP offer a relevant alternative for highlighting the importance of different parameters related to the protein affinity and to the polymer type and organization in the assembly.
Assuntos
Parede Celular , Polímeros , Polímeros/metabolismo , Parede Celular/metabolismo , Membrana Celular , CarboidratosRESUMO
This review provides a critical analysis of the state of the art of dilute acid pretreatment applied to lignocellulosic biomass. Data from 63 publications were extracted and analysed. The majority of the papers used residence times of<30 min, temperature ranges from 100 °C to 200 °C, and acid levels between 0 % and 2 %. Yields are quantified directly after pretreatment (xylose content) or after enzymatic hydrolysis (glucose content). Statistical analyses allowed the time-temperature equivalence to be quantified for three types of biomass: they were formulated by non-linear expressions. In further works, investigating less explored areas, for example moderate temperature levels with longer residence times, is recommended. Pretreatment material (time-temperature kinetics, reactor type) and analytical methods should be standardized and better described. It becomes mandatory to promote the development of an open, findable, accessible, interoperable, and reusable data approach for pretreatments research.
Assuntos
Lignina , Xilose , Biomassa , Xilose/metabolismo , Ácidos , HidróliseRESUMO
BACKGROUND: Lignocellulosic biomass is a complex network of polysaccharides and lignin that requires a pretreatment step to overcome recalcitrance and optimize valorisation into biobased products. Pretreatment of biomass induces chemical and morphological changes. Quantification of these changes is critical to understand biomass recalcitrance and to predict lignocellulose reactivity. In this study, we propose an automated method for the quantification of chemical and morphological parameters through fluorescence macroscopy, which was applied on wood samples (spruce, beechwood) pretreated with steam explosion. RESULTS: Results in fluorescence macroscopy highlighted the impact of steam explosion on spruce and beechwood: fluorescence intensity of samples was highly altered, especially for the most severe conditions. Morphological changes were also revealed: shrinkage of cells and deformation of cell walls manifested as the loss of rectangularity or circular shape, for tracheids in spruce and vessels in beechwood respectively. Quantification of fluorescence intensity of cell walls and quantification of morphological parameters related to cell lumens were carried out accurately by applying the automated method onto the macroscopic images. The results showed that lumens area and circularity could be considered as complementary markers of cell deformation, and that fluorescence intensity of the cell walls could be related to morphological changes and to the conditions of pretreatment. CONCLUSIONS: The developed procedure allows simultaneous and effective quantification of morphological parameters and fluorescence intensity of the cell walls. This approach can be applied to fluorescence macroscopy as well as other imaging techniques and provides encouraging results towards the understanding of biomass architecture.
RESUMO
Biomass from lignocellulose (LC) is a highly complex network of cellulose, hemicellulose, and lignin, which is considered to be a sustainable source of fuels, chemicals and materials. To achieve an environmental friendly and efficient LC upgrading, a better understanding of the LC architecture is necessary. We have devised some LC bioinspired model systems, based on arabinoxylan gels, in which mobility of dextrans and BSA grafted with FITC has been studied by FRAP. Our results indicate that the probes diffusion is more influenced by their hydrodynamic radius than by the gel mesh size. The addition of some cellulose nanocrystals (CNCs) decreases polymer chain mobility and has low effect on the probes diffusion, suggesting that the gels are better organized in the presence of CNCs, as shown by rheological measurements and scanning electronic microscopy observations. This demonstrates that the FRAP analysis can be a powerful tool to screen the architecture of LC model systems.
Assuntos
Parede Celular/química , Celulose/química , Fluoresceína-5-Isotiocianato/química , Modelos Biológicos , Nanopartículas/química , Plantas/química , Xilanos/química , Parede Celular/ultraestrutura , Géis/química , Nanopartículas/ultraestrutura , Plantas/ultraestruturaRESUMO
This work presents a dynamic view of the enzymatic degradation of maize cell walls, and sheds new light on the recalcitrance of hot water pretreated maize stem internodes. Infra-red microspectrometry, mass spectrometry, fluorescence recovery after photobleaching and fluorescence imaging were combined to investigate enzymatic hydrolysis at the cell scale. Depending on their polymer composition and organisation, cell types exhibits different extent and rate of enzymatic degradation. Enzymes act sequentially from the cell walls rich in accessible cellulose to the most recalcitrant cells. This phenomenon can be linked to the heterogeneous distribution of enzymes in the liquid medium and the adsorption/desorption mechanisms that differ with the type of cell.
Assuntos
Temperatura Alta , Zea mays , Celulose/química , Hidrólise , Lignina/química , Água/química , Zea mays/químicaRESUMO
BACKGROUND: Biomass recalcitrance is governed by various molecular and structural factors but the interplay between these multiscale factors remains unclear. In this study, hot water pretreatment (HWP) was applied to maize stem internodes to highlight the impact of the ultrastructure of the polymers and their interactions on the accessibility and recalcitrance of the lignocellulosic biomass. The impact of HWP was analysed at different scales, from the polymer ultrastructure or water mobility to the cell wall organisation by combining complementary compositional, spectral and NMR analyses. RESULTS: HWP increased the kinetics and yield of saccharification. Chemical characterisation showed that HWP altered cell wall composition with a loss of hemicelluloses (up to 45% in the 40-min HWP) and of ferulic acid cross-linking associated with lignin enrichment. The lignin structure was also altered (up to 35% reduction in ß-O-4 bonds), associated with slight depolymerisation/repolymerisation depending on the length of treatment. The increase in [Formula: see text], [Formula: see text] and specific surface area (SSA) showed that the cellulose environment was looser after pretreatment. These changes were linked to the increased accessibility of more constrained water to the cellulose in the 5-15 nm pore size range. CONCLUSION: The loss of hemicelluloses and changes in polymer structural features caused by HWP led to reorganisation of the lignocellulose matrix. These modifications increased the SSA and redistributed the water thereby increasing the accessibility of cellulases and enhancing hydrolysis. Interestingly, lignin content did not have a negative impact on enzymatic hydrolysis but a higher lignin condensed state appeared to promote saccharification. The environment and organisation of lignin is thus more important than its concentration in explaining cellulose accessibility. Elucidating the interactions between polymers is the key to understanding LB recalcitrance and to identifying the best severity conditions to optimise HWP in sustainable biorefineries.
RESUMO
In lignocellulosic biomass (LB), the activity of enzymes is limited by the appearance of non-specific interactions with lignin during the hydrolysis process, which maintains enzymes far from their substrate. Characterization of these complex interactions is thus a challenge in complex substrates such as LB. The method here measures molecular interactions between fluorophore-tagged molecules and native autofluorescent lignin, to be revealed by Förster resonance energy transfer (FRET). Contrary to FRET measurements in living cells using two exogenous fluorophores, FRET measurements in plants using lignin is not trivial due to its complex autofluorescence. We have developed an original acquisition and analysis pipeline with correlated observation of two complementary properties of fluorescence: fluorescence emission and lifetime. sFLIM (spectral and fluorescent lifetime imaging microscopy) provides the quantification of these interactions with high sensitivity, revealing different interaction levels between biomolecules and lignin.
Assuntos
Corantes Fluorescentes/metabolismo , Lignina/metabolismo , Microscopia de Fluorescência/métodos , Espectrometria de Fluorescência/métodos , Triticum/metabolismo , Transferência Ressonante de Energia de Fluorescência , Corantes Fluorescentes/químicaRESUMO
Enzymes are essential and ubiquitous biocatalysts involved in various metabolic pathways and used in many industrial processes. Here, we reframe enzymes not just as biocatalysts transforming bioproducts but also as sensitive probes for exploring the structure and composition of complex bioproducts, like meat tissue, dairy products and plant materials, in both food and non-food bioprocesses. This review details the global strategy and presents the most recent investigations to prepare and use enzymes as relevant probes, with a focus on glycoside-hydrolases involved in plant deconstruction and proteases and lipases involved in food digestion. First, to expand the enzyme repertoire to fit bioproduct complexity, novel enzymes are mined from biodiversity and can be artificially engineered. Enzymes are further characterized by exploring sequence/structure/dynamics/function relationships together with the environmental factors influencing enzyme interactions with their substrates. Then, the most advanced experimental and theoretical approaches developed for exploring bioproducts at various scales (from nanometer to millimeter) using active and inactive enzymes as probes are illustrated. Overall, combining multimodal and multiscale approaches brings a better understanding of native-form or transformed bioproduct architecture and composition, and paves the way to mainstream the use of enzymes as probes.
Assuntos
Biodiversidade , Lipase , Enzimas , Glicosídeo Hidrolases , PlantasRESUMO
Fluorescence is a versatile property of many molecules called fluorophores. In plant cell walls, fluorescence is generally attributed to aromatic molecules such as lignin. In contrary to fluorescence intensity, fluorescence lifetime is independent from fluorophore concentration. So mapping fluorescence lifetime of plant cell walls represents a complementary approach to acquire chemical and structural information of cell wall components and interactions.
Assuntos
Parede Celular/ultraestrutura , Microscopia de Fluorescência/métodos , Imagem Óptica/métodos , Plantas/ultraestrutura , Parede Celular/química , Lignina/análise , Plantas/químicaRESUMO
Lignocellulosic biomass (LB) is an abundant and renewable resource from plants mainly composed of polysaccharides (cellulose and hemicelluloses) and an aromatic polymer (lignin). LB has a high potential as an alternative to fossil resources to produce second-generation biofuels and biosourced chemicals and materials without compromising global food security. One of the major limitations to LB valorisation is its recalcitrance to enzymatic hydrolysis caused by the heterogeneous multi-scale structure of plant cell walls. Factors affecting LB recalcitrance are strongly interconnected and difficult to dissociate. They can be divided into structural factors (cellulose specific surface area, cellulose crystallinity, degree of polymerization, pore size and volume) and chemical factors (composition and content in lignin, hemicelluloses, acetyl groups). Goal of this review is to propose an up-to-date survey of the relative impact of chemical and structural factors on biomass recalcitrance and of the most advanced techniques to evaluate these factors. Also, recent spectral and water-related measurements accurately predicting hydrolysis are presented. Overall, combination of relevant factors and specific measurements gathering simultaneously structural and chemical information should help to develop robust and efficient LB conversion processes into bioproducts.
RESUMO
Lignocellulose biomass can be transformed into sustainable chemicals, materials and energy but its natural recalcitrance requires the use of pretreatment to enhance subsequent catalytic steps. Dilute acid pretreatment is one of the most common and efficient ones, however its impact has not yet been investigated simultaneously at nano- and cellular-scales. Poplar samples have been pretreated by dilute acid at different controlled severities, then characterized by combined structural and spectral techniques (scanning electron microscopy, confocal microscopy, autofluorescence, fluorescence lifetime, Raman). Results show that pretreatment favours lignin depolymerization until severity of 2.4-2.5 while at severity of 2.7 lignin seems to repolymerize as revealed by broadening of autofluorescence spectrum and strong decrease in fluorescence lifetime. Importantly, both nano-scale and cellular-scale markers can predict hydrolysis yield of pretreated samples, highlighting some connections in the multiscale recalcitrance of lignocellulose.
Assuntos
Lignina , Populus , Ácidos , Biomassa , Hidrólise , Microscopia Eletrônica de VarreduraRESUMO
BACKGROUND: Lignocellulose biomass is known as a recalcitrant material towards enzymatic hydrolysis, increasing the process cost in biorefinery. In nature, filamentous fungi naturally degrade lignocellulose, using an arsenal of hydrolytic and oxidative enzymes. Assessment of enzyme hydrolysis efficiency generally relies on the yield of glucose for a given biomass. To better understand the markers governing recalcitrance to enzymatic degradation, there is a need to enlarge the set of parameters followed during deconstruction. RESULTS: Industrially-pretreated biomass feedstocks from wheat straw, miscanthus and poplar were sequentially hydrolysed following two steps. First, standard secretome from Trichoderma reesei was used to maximize cellulose hydrolysis, producing three recalcitrant lignin-enriched solid substrates. Then fungal secretomes from three basidiomycete saprotrophs (Laetisaria arvalis, Artolenzites elegans and Trametes ljubarskyi) displaying various hydrolytic and oxidative enzymatic profiles were applied to these recalcitrant substrates, and compared to the T. reesei secretome. As a result, most of the glucose was released after the first hydrolysis step. After the second hydrolysis step, half of the remaining glucose amount was released. Overall, glucose yield after the two sequential hydrolyses was more dependent on the biomass source than on the fungal secretomes enzymatic profile. Solid residues obtained after the two hydrolysis steps were characterized using complementary methodologies. Correlation analysis of several physico-chemical parameters showed that released glucose yield was negatively correlated with lignin content and cellulose crystallinity while positively correlated with xylose content and water sorption. Water sorption appears as a pivotal marker of the recalcitrance as it reflects chemical and structural properties of lignocellulosic biomass. CONCLUSIONS: Fungal secretomes applied to highly recalcitrant biomass samples can further extend the release of the remaining glucose. The glucose yield can be correlated to chemical and physical markers, which appear to be independent from the biomass type and secretome. Overall, correlations between these markers reveal how nano-scale properties (polymer content and organization) influence macro-scale properties (particle size and water sorption). Further systematic assessment of these markers during enzymatic degradation will foster the development of novel cocktails to unlock the degradation of lignocellulose biomass.
RESUMO
The crystal structure of the family GH-51 alpha- l-arabinofuranosidase from Thermobacillus xylanilyticus has been solved as a seleno-methionyl derivative. In addition, the structure of an inactive mutant Glu176Gln is presented in complex with a branched pentasaccharide, a fragment of its natural substrate xylan. The overall structure shows the two characteristic GH-51 domains: a catalytic domain that is folded into a (beta/alpha) 8-barrel and a C-terminal domain that displays jelly roll architecture. The pentasaccharide is bound in a groove on the surface of the enzyme, with the mono arabinosyl branch entering a tight pocket harboring the catalytic dyad. Detailed analyses of both structures and comparisons with the two previously determined structures from Geobacillus stearothermophilus and Clostridium thermocellum reveal important details unique to the Thermobacillus xylanilyticus enzyme. In the absence of substrate, the enzyme adopts an open conformation. In the substrate-bound form, the long loop connecting beta-strand 2 to alpha-helix 2 closes the active site and interacts with the substrate through residues His98 and Trp99. The results of kinetic and fluorescence titration studies using mutants underline the importance of this loop, and support the notion of an interaction between Trp99 and the bound substrate. We suggest that the changes in loop conformation are an integral part of the T. xylanilyticus alpha- l-arabinofuranosidase reaction mechanism, and ensure efficient binding and release of substrate.
Assuntos
Bacillaceae/enzimologia , Glicosídeo Hidrolases/química , Glicosídeo Hidrolases/metabolismo , Oligossacarídeos/química , Xilanos/metabolismo , Arabinose/metabolismo , Proteínas de Bactérias/química , Proteínas de Bactérias/metabolismo , Configuração de Carboidratos , Cristalografia por Raios X , Glicosídeo Hidrolases/genética , Modelos Moleculares , Mutagênese Sítio-Dirigida , Proteínas Recombinantes/química , Proteínas Recombinantes/metabolismo , TermodinâmicaRESUMO
BACKGROUND: Improving lignocellulolytic enzymes' diffusion and accessibility to their substrate in the plant cell walls is recognised as a critical issue for optimising saccharification. Although many chemical features are considered as detrimental to saccharification, enzymes' dynamics within the cell walls remains poorly explored and understood. To address this issue, poplar fragments were submitted to hot water and ionic liquid pretreatments selected for their contrasted effects on both the structure and composition of lignocellulose. In addition to chemical composition and porosity analyses, the diffusion of polyethylene glycol probes of different sizes was measured at three different time points during the saccharification. RESULTS: Probes' diffusion was mainly affected by probes size and pretreatments but only slightly by saccharification time. This means that, despite the removal of polysaccharides during saccharification, diffusion of probes was not improved since they became hindered by changes in lignin conformation, whose relative amount increased over time. Porosity measurements showed that probes' diffusion was highly correlated with the amount of pores having a diameter at least five times the size of the probes. Testing the relationship with saccharification demonstrated that accessibility of 1.3-1.7-nm radius probes measured by FRAP on non-hydrolysed samples was highly correlated with poplar digestibility together with the measurement of initial porosity on the range 5-20 nm. CONCLUSION: Mobility measurements performed before hydrolysis can serve to explain and even predict saccharification with accuracy. The discrepancy observed between probes' size and pores' diameters to explain accessibility is likely due to biomass features such as lignin content and composition that prevent probes' diffusion through non-specific interactions probably leading to pores' entanglements.