Avoid equipment graveyards: rigorous process to improve identification and procurement of effective, affordable, and usable newborn devices in low-resource hospital settings.

BACKGROUND: Millions of newborns die annually from preventable causes, with the highest rates occurring in Africa. Reducing neonatal mortality requires investment to scale hospital care, which includes providing hospitals with appropriate technology to care for small and sick newborns. Expensive medical devices designed for high-resource settings often fail to withstand conditions in low-resource hospitals, including humidity, dust, frequent user turnover, complex maintenance, lack of stable power, or difficulty sourcing expensive consumables. Rigorous evaluation protocols are needed to identify effective, affordable, rugged, and easy-to-use medical devices appropriate for quality hospital-based newborn care in low-resource hospitals. METHODS: We developed an evidence-based technology review process to identify medical devices suitable for small and sick newborn care in low-resource hospitals. The eight-step process consists of: identifying devices needed for effective newborn care; defining Target Product Profiles (TPPs); identifying commercially-available products that may meet TPPs; conducting desk research to evaluate technologies against TPPs; performing technical performance verification testing under laboratory conditions; verifying technical performance after exposure to heat, humidity, dust, and power loss; performing usability evaluations with nurses, and qualifying devices that pass all steps. Devices were purchased, installed, and monitored in newborn wards across Kenya, Malawi, Nigeria, and Tanzania. RESULTS: Of 271 devices considered, only 45 (16.6%) met corresponding TPPs based on desk research. Thirty-nine were purchased and evaluated in the laboratory; five (12.8%) failed to meet TPPs. Thirty-four products passing laboratory evaluation underwent short-term environmental testing; only one (2.9%) device failed. Thirty-seven products underwent usability testing with 127 clinicians; surprisingly, 14 (37.8%) failed to meet TPPs. Twenty-three products passed all evaluations, and 2457 devices were installed across 65 newborn wards in Kenya, Malawi, Nigeria, and Tanzania. Continuous device monitoring reported minimal device failures, with failed devices typically returned to service within two days, resulting in an average uptime (service days divided by days installed) of 99%. CONCLUSION: An evidence-based device selection process can improve procurement of effective, affordable, rugged, usable newborn care devices for low-resource hospitals, and feedback to manufacturers can improve device quality. Similar processes could be adapted beyond newborn care to identify medical devices suitable for implementation in any low-resource setting.

Target product profiles for neonatal care devices: systematic development and outcomes with NEST360 and UNICEF.

BACKGROUND: Medical devices are critical to providing high-quality, hospital-based newborn care, yet many of these devices are unavailable in low- and middle-income countries (LMIC) and are not designed to be suitable for these settings. Target Product Profiles (TPPs) are often utilised at an early stage in the medical device development process to enable user-defined performance characteristics for a given setting. TPPs can also be applied to assess the profile and match of existing devices for a given context. METHODS: We developed initial TPPs for 15 newborn product categories for LMIC settings. A Delphi-like process was used to develop the TPPs. Respondents completed an online survey where they scored their level of agreement with each of the proposed performance characteristics for each of the 15 devices. Characteristics with < 75% agreement between respondents were discussed and voted on using Mentimeter™ at an in-person consensus meeting. FINDINGS: The TPP online survey was sent to 180 people, of which 103 responded (57%). The majority of respondents were implementers/clinicians (51%, 53/103), with 50% (52/103) from LMIC. Across the 15 TPPs, 403 (60%) of the 668 performance characteristics did not achieve > 75% agreement. Areas of disagreement were voted on by 69 participants at an in-person consensus meeting, with consensus achieved for 648 (97%) performance characteristics. Only 20 (3%) performance characteristics did not achieve consensus, most (15/20) relating to quality management systems. UNICEF published the 15 TPPs in April 2020, accompanied by a report detailing the online survey results and consensus meeting discussion, which has been viewed 7,039 times (as of January 2023). CONCLUSIONS: These 15 TPPs can inform developers and enable implementers to select neonatal care products for LMIC. Over 2,400 medical devices and diagnostics meeting these TPPs have been installed in 65 hospitals in Nigeria, Tanzania, Kenya, and Malawi through the NEST360 Alliance. Twenty-three medical devices identified and qualified by NEST360 meet nearly all performance characteristics across 11 of the 15 TPPs. Eight of the 23 qualified medical devices are available in the UNICEF Supply Catalogue. Some developers have adjusted their technologies to meet these TPPs. There is potential to adapt the TPP process beyond newborn care.

Devices and furniture for small and sick newborn care: systematic development of a planning and costing tool.

BACKGROUND: High-quality neonatal care requires sufficient functional medical devices, furniture, fixtures, and use by trained healthcare workers, however there is lack of publicly available tools for quantification and costing. This paper describes development and use of a planning and costing tool regarding furniture, fixtures and devices to support scale-up of WHO level-2 neonatal care, for national and global newborn survival targets. METHODS: We followed a systematic process. First, we reviewed planning and costing tools of relevance. Second, we co-designed a new tool to estimate furniture and device set-up costs for a default 40-bed level-2 neonatal unit, incorporating input from multi-disciplinary experts and newborn care guidelines. Furniture and device lists were based off WHO guidelines/norms, UNICEF and national manuals/guides. Due to lack of evidence-based quantification, ratios were based on operational manuals, multi-country facility assessment data, and expert opinion. Default unit costs were from government procurement agency costs in Kenya, Nigeria, and Tanzania. Third, we refined the tool by national use in Tanzania. RESULTS: The tool adapts activity-based costing (ABC) to estimate quantities and costs to equip a level-2 neonatal unit based on three components: (1) furniture/fixtures (18 default but editable items); (2) neonatal medical devices (16 product categories with minimum specifications for use in low-resource settings); (3) user training at device installation. The tool was used in Tanzania to generate procurement lists and cost estimates for level-2 scale-up in 171 hospitals (146 District and 25 Regional Referral). Total incremental cost of all new furniture and equipment acquisition, installation, and user training were US$93,000 per District hospital (level-2 care) and US$346,000 per Regional Referral hospital. Estimated cost per capita for whole-country district coverage was US$0.23, representing 0.57% increase in government health expenditure per capita and additional 0.35% for all Regional Referral hospitals. CONCLUSION: Given 2.3 million neonatal deaths and potential impact of level-2 newborn care, rational and efficient planning of devices linked to systems change is foundational. In future iterations, we aim to include consumables, spare parts, and maintenance cost options. More rigorous implementation research data are crucial to formulating evidence-based ratios for devices numbers per baby. Use of this tool could help overcome gaps in devices numbers, advance efficiency and quality of neonatal care.

Point-of-care p24 antigen detection for early infant diagnosis of HIV infection: cross-sectional and longitudinal studies in Zambia.

BACKGROUND: Early infant diagnosis of HIV infection is challenging in sub-Saharan Africa, particularly in rural areas, leading to delays in diagnosis and treatment. Use of a point-of-care test would overcome many challenges. This study evaluated the validity of a novel point-of-care p24 antigen detection test (LYNX) in rural and urban settings in southern Zambia. METHODS: Two studies were conducted: a cross-sectional study from 2014 to 2015 at Macha Hospital (LYNX Hospital study) and a longitudinal study from 2016 to 2018 at 12 health facilities in Southern Province, Zambia (NSEBA study). In both studies, children attending the facilities for early infant diagnosis were enrolled and a blood sample was collected for routine testing at the central lab and immediate on-site testing with the LYNX test. The performance of the LYNX test was measured in comparison to nucleic acid-based testing at the central lab. RESULTS: In the LYNX Hospital study, 210 tests were performed at a median age of 23.5 weeks (IQR: 8.9, 29.0). The sensitivity and specificity of the test were 70.0 and 100.0%, respectively. In the NSEBA study, 2608 tests were performed, including 1305 at birth and 1222 on children ≥4 weeks of age. For samples tested at birth, sensitivity was 13.6% (95% CI: 2.9, 34.9) and specificity was 99.6% (95% CI: 99.1, 99.9). While specificity was high for all ages, sensitivity increased with age and was higher for participants tested at ≥4 weeks of age (80.6%; 95% CI: 67.4, 93.7). Children with positive nucleic acid tests were more likely to be negative by the LYNX test if their mother received antiretroviral therapy during pregnancy (60.7% vs. 24.2%; p = 004). CONCLUSIONS: Considering the high specificity and moderate sensitivity that increased with age, the LYNX test could be of value for early infant diagnosis for infants ≥4 weeks of age, particularly in rural areas where centralized testing leads to long delays. Point-of-care tests with moderate sensitivity and high specificity that are affordable, easy-to-use, and easily implemented and maintained should be developed to expand access to testing and deliver same-day results to infants in areas where it is not feasible to implement nucleic acid-based point-of-care assays.

Sustainable HIV treatment in Africa through viral-load-informed differentiated care.

There are inefficiencies in current approaches to monitoring patients on antiretroviral therapy in sub-Saharan Africa. Patients typically attend clinics every 1 to 3 months for clinical assessment. The clinic costs are comparable with the costs of the drugs themselves and CD4 counts are measured every 6 months, but patients are rarely switched to second-line therapies. To ensure sustainability of treatment programmes, a transition to more cost-effective delivery of antiretroviral therapy is needed. In contrast to the CD4 count, measurement of the level of HIV RNA in plasma (the viral load) provides a direct measure of the current treatment effect. Viral-load-informed differentiated care is a means of tailoring care so that those with suppressed viral load visit the clinic less frequently and attention is focussed on those with unsuppressed viral load to promote adherence and timely switching to a second-line regimen. The most feasible approach to measuring viral load in many countries is to collect dried blood spot samples for testing in regional laboratories; however, there have been concerns over the sensitivity and specificity of this approach to define treatment failure and the delay in returning results to the clinic. We use modelling to synthesize evidence and evaluate the cost-effectiveness of viral-load-informed differentiated care, accounting for limitations of dried blood sample testing. We find that viral-load-informed differentiated care using dried blood sample testing is cost-effective and is a recommended strategy for patient monitoring, although further empirical evidence as the approach is rolled out would be of value. We also explore the potential benefits of point-of-care viral load tests that may become available in the future.

Opportunities and challenges for cost-efficient implementation of new point-of-care diagnostics for HIV and tuberculosis.

Stakeholders agree that supporting high-quality diagnostics is essential if we are to continue to make strides in the fight against human immunodeficiency virus (HIV) and tuberculosis. Despite the need to strengthen existing laboratory infrastructure, which includes expanding and developing new laboratories, there are clear diagnostic needs where conventional laboratory support is insufficient. Regarding HIV, rapid point-of-care (POC) testing for initial HIV diagnosis has been successful, but several needs remain. For tuberculosis, several new diagnostic tests have recently been endorsed by the World Health Organization, but a POC test remains elusive. Human immunodeficiency virus and tuberculosis are coendemic in many high prevalence locations, making parallel diagnosis of these conditions an important consideration. Despite its clear advantages, POC testing has important limitations, and laboratory-based testing will continue to be an important component of future diagnostic networks. Ideally, a strategic deployment plan should be used to define where and how POC technologies can be most efficiently and cost effectively integrated into diagnostic algorithms and existing test networks prior to widespread scale-up. In this fashion, the global community can best harness the tremendous capacity of novel diagnostics in fighting these 2 scourges.

Perspectives on introduction and implementation of new point-of-care diagnostic tests.

In recent years, there has been significant investment from both the private and public sectors in the development of diagnostic technologies to meet the need for human immunodeficiency virus (HIV) and tuberculosis testing in low-resource settings. Future investments should ensure that the most appropriate technologies are adopted in settings where they will have a sustainable impact. Achieving these aims requires the involvement of many stakeholders, as their needs, operational constraints, and priorities are often distinct. Here, we discuss these considerations from different perspectives representing those of various stakeholders involved in the development, introduction, and implementation of diagnostic tests. We also discuss some opportunities to address these considerations.

Is there a "price that's right" for at-home COVID tests?

The COVID-19 pandemic has impacted the daily lives of individuals across the world as multiple variants continue introducing new complexities. In December 2021, which is when we conducted our study, pressure to resume the normalcy of daily life was mounting as a new variant, Omicron, was rapidly spreading. A variety of at-home tests detecting SARS-CoV-2, known to the general public as "COVID tests," were available for consumers to purchase. In this study, we conducted conjoint analysis utilizing an internet-based survey by presenting consumers (n = 583) with 12 different hypothetical at-home COVID test concepts that varied on five attributes (price, accuracy, time, where-to-buy, and method). Price was identified as the most important attribute, because participants were very price sensitive. Quick turnaround time and high accuracy were also identified as important. Additionally, although 64% of respondents were willing to take an at-home COVID test, only 22% reported they had previously taken the test. On December 21, 2021, President Biden announced the U.S. government would purchase 500 million at-home rapid tests and distribute them for free to Americans. Given the importance of price to participants, this policy of providing free at-home COVID tests was directionally appropriate.

Improved screening of retinopathy of prematurity (ROP): development of a target product profile (TPP) for resource-limited settings.

BACKGROUND: As more preterm infants survive, complications of preterm birth, including retinopathy of prematurity (ROP), become more prevalent. ROP rates and blindness from ROP are higher in low-income and middle-income countries, where exposure to risk factors can be higher and where detection and treatment of ROP are under-resourced or non-existent. Access to low-cost imaging devices would improve remote screening capabilities for ROP. METHODS: Target product profiles (TPPs) are developed early in the medical device development process to define the setting, target user and range of product requirements. A Delphi-like process, consisting of an online survey and consensus meeting, was used to develop a TPP for an ROP imaging device, collecting feedback on a proposed set of 64 product requirements. RESULTS: Thirty-six stakeholders from 17 countries provided feedback: clinicians (72%), product developers (14%), technicians (6%) and other (8%). Thirty-six per cent reported not currently screening for ROP, with cited barriers including cost (44%), no training (17%) and poor image quality (16%). Among those screening (n=23), 48% use more than one device, with the most common being an indirect ophthalmoscope (87%), followed by RetCam (26%) and smartphone with image capture (26%). Consensus was reached on 53 (83%) product requirements. The 11 remaining were discussed at the consensus meeting, and all but two achieved consensus. CONCLUSIONS: This TPP process was novel in that it successfully brought together diverse stakeholders to reach consensus on the product requirements for an ROP imaging devices. The resulting TPP provides a framework from which innovators can develop prototypes.

C-THAN: A new research center for the development of point-of-care technology for HIV/AIDS.

The Center for Innovation in Point-of-Care Technologies for HIV/AIDS at Northwestern University (C-THAN) is a partner in the Point-of-Care Technologies Research Network (POCTRN) of the National Institutes of Biomedical Imaging and Bioengineering. POCTRN's mission is to drive the development of appropriate point-of-care (POC) diagnostic technologies through collaboration that merges scientific and technological capabilities with clinical need. C-THAN develops POC technologies for improved management of HIV/AIDS in low- and middle-income countries with a focus on sub-Saharan Africa. C-THAN incorporates clinical and user needs with technology expertise and resources to address commercialization and implementation barriers through: 1) assessment of unmet clinical needs in POC testing for HIV/AIDS and its comorbidities; 2) collaborations with physicians, researchers and engineers; 3) development of technical, clinical, industrial and regulatory partnerships; 4) clinical testing of prototype devices; and 5) creation of training opportunities for technology developers, evaluators, and other stakeholders. Technologies supported include tests for detection and monitoring of HIV/AIDS and its common comorbidities including tuberculosis, non-tuberculous mycobacteria, viral hepatitis and HIV-related malignancies. CTHAN relies on collaborations established by Northwestern University in Nigeria, South Africa, Mali and Tanzania, to have impact on the prevention and clinical management of HIV/AIDS.

The feasibility of fingerstick blood collection for point-of-care HIV-1 viral load monitoring in rural Zambia.

Viral load monitoring for HIV treatment is recommended but not feasible in many settings. A point-of-care test using capillary blood would increase access but may require up to 200 µL of blood to achieve a lower limit of detection of 1000 copies/mL. This cross-sectional study evaluated the feasibility of collecting 200 µL of capillary blood and blood collection preferences among adults in rural Zambia. Adults seeking HIV counseling and testing at Macha Hospital were recruited in 2015. Capillary blood was collected in four 50 µL tubes. Blood collection was categorized as complete (200 µL collected), partial (all tubes filled but <200 µL obtained due to collection techniques), or incomplete (1-4 tubes attempted; <200 µL obtained due to insufficient blood flow). One fingerstick was required for 90% of the 201 participants. A median blood volume of 196 µL was collected. Complete, partial and incomplete collection was achieved in 34%, 59% and 6% of participants. The majority of participants (95%) preferred fingerstick over venous blood collection. A point-of-care viral load test requiring up to 200 µL of blood is feasible in a rural setting but would require training and supervision to ensure that sufficient blood was collected.

Exploring the Case for a Global Alliance for Medical Diagnostics Initiative.

In recent years, the private and public sectors have increased investments in medical diagnostics for low- and middle-income countries (LMICs). Despite these investments, numerous barriers prevent the adoption of existing diagnostics and discourage the development and introduction of new diagnostics in LMICs. In the late 1990s, the global vaccine community had similar challenges, as vaccine coverage rates stagnated and the introduction of new vaccines was viewed as a distraction to delivering existing vaccines. To address these challenges, the international community came together and formed the Global Alliance for Vaccines Initiative (GAVI). Sixteen years after the formation of GAVI, we see evidence of a healthier global vaccine landscape. We discuss how GAVI's four guiding principles (product, health systems strengthening, financing and market shaping) might apply to the advancement of medical diagnostics in LMICs. We present arguments for the international community and existing organizations to establish a Global Alliance for Medical Diagnostics Initiative (GAMDI).

Optimizing tuberculosis case detection through a novel diagnostic device placement model: the case of Uganda.

BACKGROUND: Xpert MTB/RIF (Xpert) is being widely adopted in high TB burden countries. Analysis is needed to guide the placement of devices within health systems to optimize the tuberculosis (TB) case detection rate (CDR). METHODS: We used epidemiological and operational data from Uganda (139 sites serving 87,600 individuals tested for TB) to perform a model-based comparison of the following placement strategies for Xpert devices: 1) Health center level (sites ranked by size from national referral hospitals to health care level III centers), 2) Smear volume (sites ranked from highest to lowest volume of smear microscopy testing), 3) Antiretroviral therapy (ART) volume (sites ranked from greatest to least patients on ART), 4) External equality assessment (EQA) performance (sites ranked from worst to best smear microscopy performance) and 5) TB prevalence (sites ranked from highest to lowest). We compared two clinical algorithms, one where Xpert was used only for smear microscopy negative samples versus another replacing smear microscopy. The primary outcome was TB CDR; secondary outcomes were detection of multi-drug resistant TB, number of sites requiring device placement to achieve specified rollout coverage, and cost. RESULTS: Placement strategies that prioritized sites with higher TB prevalence maximized CDR, with an incremental rate of 6.2-12.6% compared to status quo (microscopy alone). Diagnosis of MDR-TB was greatest in the TB Prevalence strategy when Xpert was used in place of smear microscopy. While initial implementation costs were lowest in the Smear Volume strategy, cost per additional TB case detected was lowest in the TB prevalence strategy. CONCLUSION: In Uganda, placement of Xpert devices in sites with high TB prevalence yielded the highest TB CDR at the lowest cost per additional case diagnosed. These results represent novel use of program level data to inform the optimal placement of new technology in resource-constrained settings.

Opportunities and challenges for cost-efficient implementation of new point-of-care diagnostics for hiv and tuberculosis

Stakeholders agree that supporting high-quality diagnostics is essential if we are to continue to make strides in the fight against human immunodeficiency virus (HIV) and tuberculosis. Despite the need to strengthen existing laboratory infrastructure, which includes expanding and developing new laboratories, there are clear diagnostic needs where conventional laboratory support is insufficient. Regarding HIV, rapid point-of-care (POC) testing for initial HIV diagnosis has been successful, but several needs remain. For tuberculosis, several new diagnostic tests have recently been endorsed by the World Health Organization, but a POC test remains elusive. Human immunodeficiency virus and tuberculosis are coendemic in many high prevalence locations, making parallel diagnosis of these conditions an important consideration. Despite its clear advantages, POC testing has important limitations, and laboratory-based testing will continue to be an important component of future diagnostic networks. Ideally, a strategic deployment plan should be used to define where and how POC technologies can be most efficiently and cost effectively integrated into diagnostic algorithms and existing test networks prior to widespread scale-up. In this fashion, the global community can best harness the tremendous capacity of novel diagnostics in fighting these 2 scourges.