beta-Lactamases: protein evolution in real time.

The evolution and spread of bacteria resistant to beta-lactam antibiotics has progressed at an alarming rate. Bacteria may acquire resistance to a given drug by mutation of pre-existing genes or by the acquisition of new genes from other bacteria. One ongoing example of these mechanisms is the evolution of new variants of the TEM and SHV beta-lactamases with altered substrate specificity.

Amino acid sequence determinants of beta-lactamase structure and activity.

TEM-1 beta-lactamase catalyzes the hydrolysis of beta-lactam antibiotics such as the penicillins and cephalosporins, thus providing for bacterial resistance to these compounds. To determine the amino acid residues critical for the structure and function of TEM-1 beta-lactamase, the codons for each of the 263 amino acid residues that constitute the mature form of the enzyme were randomized using a site-directed mutagenesis procedure. Functional random mutants were selected based on their ability to confer ampicillin resistance to Escherichia coli. The DNA sequence of several functional mutants was determined for each set of random mutants. It was found that 43 out of the 263 amino acid residues do not tolerate substitutions and therefore are critical for the structure and activity of the enzyme. In addition, a comparison of conserved residue positions among functional beta-lactamase mutants with conserved residues in the beta-lactamase gene family identified many positions which did not tolerate substitutions in the mutagenesis studies but are freely substituted among members of the gene family. This observation may be due to the accumulation of compensating mutations among members of the gene family. Finally, the sequence variability at residue positions among functional mutants was quantitated by calculating the effective number of substitutions at each position using information-theoretical entropy. These values were used to obtain a quantitative estimate of the correlation between the sequence variability at a position and the fractional accessible surface area of the residue. The correlation is found to be statistically significant in that buried residues tend to exhibit low variability and invariant residues tend to exhibit low solvent exposure. However, the correlation is weak because most residues are neither completely buried nor invariant.

Analysis of a circular derivative of Saccharomyces cerevisiae chromosome III: a physical map and identification and location of ARS elements.

DNA was isolated from a circular derivative of chromosome III to prepare a library of recombinant plasmids enriched in chromosome III sequences. An ordered set of recombinant plasmids and bacteriophages carrying the contiguous 210-kilobase region of chromosome III between the HML and MAT loci was identified, and a complete restriction map was prepared with BamHI and EcoRI. Using the high frequency transformation assay and extensive subcloning, 13 ARS elements were mapped in the cloned region. Comparison of the physical maps of chromosome III from three strains revealed that the chromosomes differ in the number and positions of Ty elements and also show restriction site polymorphisms. A comparison of the physical map with the genetic map shows that meiotic recombination rates vary at least tenfold along the length of the chromosome.

Identification of residues critical for metallo-beta-lactamase function by codon randomization and selection.

IMP-1 beta-lactamase is a zinc metallo-enzyme encoded by the transferable bla(IMP-1) gene, which confers resistance to virtually all beta-lactam antibiotics including carbapenems. To understand how IMP-1 recognizes and hydrolyzes beta-lactam antibiotics it is important to determine which amino acid residues are critical for catalysis and which residues control substrate specificity. We randomized 27 individual codons in the bla(IMP-1) gene to create libraries that contain all possible amino acid substitutions at residue positions in and near the active site of IMP-1. Mutants from the random libraries were selected for the ability to confer ampicillin resistance to Escherichia coli. Of the positions randomized, >50% do not tolerate amino acid substitutions, suggesting they are essential for IMP-1 function. The remaining positions tolerate amino acid substitutions and may influence the substrate specificity of the enzyme. Interestingly, kinetic studies for one of the functional mutants, Asn233Ala, indicate that an alanine substitution at this position significantly increases catalytic efficiency as compared with the wild-type enzyme.

Use of the arabinose p(bad) promoter for tightly regulated display of proteins on bacteriophage.

Phage display is a widely used method to optimize the binding characteristics of protein-ligand interactions. In addition, it has been used to clone genes from genomic and cDNA libraries based on their ligand-binding characteristics. One difficulty often encountered when expressing heterologous proteins by phage display is the toxicity of the protein on the Escherichia coli host. Previous studies have shown that heterologous protein expression can be tightly controlled using plasmids with the P(BAD) promoter of the arabinose operon of E. coli, and the araC gene, which is both a positive and negative regulator of the promoter. We constructed a set of phage display vectors that utilize the P(BAD) promoter to control the expression of proteins on the surface of the M13 bacteriophage. These vectors exhibit tightly controlled expression of proteins on the surface of the phage. In addition, the amount of protein displayed on the phage is modulated by the amount of arabinose present in the growth medium during phage propagation. This may be useful for altering the stringency of binding enrichment during phage display.

Mapping protein-ligand interactions using whole genome phage display libraries.

The function of many genes cannot be deduced from sequence similarity, and biochemical methods are usually required. Whole genome sequences can be thought of as not only a set of genes but also collections of functional domains. These domains can be studied by affinity methods whereby identification of the ligand can provide information on biochemical function. To take advantage of this method, one must express all functional domains in a form suitable for affinity studies. Phage display technology provides a means for accomplishing this. The pJuFo phage display system, based on the interaction between the leucine zippers Jun and Fos, has been modified and used to create a genomic phage display library from Escherichia coli MG1655. The system has been tested by using the library to map the dominant binding epitopes for an anti-RecA protein polyclonal antibody sera. This methodology provides a general biochemical approach to functional analysis of protein-ligand interactions on a genomewide basis.

Identification and characterization of beta-lactamase inhibitor protein-II (BLIP-II) interactions with beta-lactamases using phage display.

Protein-protein interactions are critical to cellular processes yet the ability to predict and rationally design interactions is limited because of incomplete knowledge of the principles governing these interactions. The beta-lactamase inhibitory protein (BLIP)/beta-lactamase interaction has become a model system to investigate protein-protein interactions and has been the focus of several structural, thermodynamic and binding specificity studies. BLIP-II also inhibits beta-lactamase but has no sequence homology with BLIP. The structure of BLIP-II in complex with TEM-1 beta-lactamase revealed that BLIP-II has a completely different structure than BLIP but it interacts with the same protruding loop-helix region of TEM-1 as does BLIP. The significance of the individual interacting residues in molecular recognition by BLIP-II is currently unknown. Therefore, a phage display vector was developed with the purpose of expressing BLIP-II onto the surface of the M13 filamentous bacteriophage. The BLIP-II displayed phage bound to TEM-1 with picomolar affinity indicating that BLIP-II is properly folded while on the surface of the phage. The phage system, as well as enzyme inhibition assays with purified proteins, revealed that BLIP-II is a more potent inhibitor than BLIP for several class A beta-lactamases with K(i) values in the low picomolar range.

Probing beta-lactamase structure and function using random replacement mutagenesis.

A new analytical mutagenesis technique is described that involves randomizing the DNA sequence of a short stretch of a gene (3-6 codons) and determining the percentage of all possible random sequences that produce a functional protein. A low percentage of functional random sequences in a complete library of random substitutions indicates that the region mutagenized is important for the structure and/or function of the protein. Repeating the mutagenesis over many regions throughout a protein gives a global perspective of which amino acid sequences in a protein are critical. We applied this method to 66 codons of the gene encoding TEM-1 beta-lactamase in 19 separate experiments. We found that TEM-1 beta-lactamase is extremely tolerant of amino acid substitutions: on average, 44% of all mutants with random substitutions function and 20% of the substitutions are expressed, secreted, and fold well enough to function at levels similar to those for the wild-type enzyme. We also found a few exceptional regions where only a few random sequences function. Examination of the X-ray structures of homologous beta-lactamases indicates that the regions most sensitive to substitution are in the vicinity of the active site pocket or buried in the hydrophobic core of the protein. DNA sequence analysis of functional random sequences has been used to obtain more detailed information about the amino acid sequence requirements for several regions and this information has been compared to sequence conservation among several related beta-lactamases.

Identification of amino acid substitutions that alter the substrate specificity of TEM-1 beta-lactamase.

TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Recently, TEM beta-lactamase variants with amino acid substitutions in the active-site pocket of the enzyme have been identified in natural isolates with increased resistance to extended-spectrum cephalosporins. To identify other amino acid substitutions that alter the activity of TEM-1 towards extended-spectrum cephalosporins, we probed regions around the active-site pocket by random-replacement mutagenesis. This mutagenesis technique involves randomizing the DNA sequence of three to six codons in the blaTEM-1 gene to form a library containing all or nearly all of the possible substitutions for the region randomized. In total, 20 different residue positions that had been randomized were screened for amino acid substitutions that increased enzyme activity towards the extended-spectrum cephalosporin cefotaxime. Substitutions at positions 104, 168, and 238 in the TEM-1 beta-lactamase that resulted in increased enzyme activity towards extended-spectrum cephalosporins were found. In addition, small deletions in the loop containing residues 166 to 170 drastically altered the substrate specificity of the enzyme by increasing activity towards extended-spectrum cephalosporins while virtually eliminating activity towards ampicillin.

A natural polymorphism in beta-lactamase is a global suppressor.

A M182T substitution was discovered as a second-site suppressor of a missense mutation in TEM-1 beta-lactamase. The combination of the M182T substitution with other substitutions in the enzyme indicates the M182T substitution is a global suppressor of missense mutations in beta-lactamase. The M182T substitution also is found in natural variants of TEM-1 beta-lactamase with altered substrate specificity that have evolved in response to antibiotic therapy. The M182T substitution may have been selected in natural isolates as a suppressor of folding or stability defects resulting from mutations associated with drug resistance. This pathway of protein evolution may occur in other targets of antimicrobial drugs such as the HIV protease.

The role of residue 238 of TEM-1 beta-lactamase in the hydrolysis of extended-spectrum antibiotics.

beta-Lactamases inactivate beta-lactam antibiotics by catalyzing the hydrolysis of the amide bond in the beta-lactam ring. The plasmid-encoded class A TEM-1 beta-lactamase is a commonly encountered beta-lactamase. It is able to inactivate penicillins and cephalosporins but not extended-spectrum antibiotics. However, TEM-1-derived natural variants containing the G238S amino acid substitution display increased hydrolysis of extended-spectrum antibiotics. Two models have been proposed to explain the role of the G238S substitution in hydrolysis of extended-spectrum antibiotics. The first proposes a direct hydrogen bond of the Ser238 side chain to the oxime group of extended-spectrum antibiotics. The second proposes that steric conflict with surrounding residues, due to increased side chain volume, leads to a more accessible active site pocket. To assess the validity of each model, TEM-1 mutants with amino acids substitutions of Ala, Ser, Cys, Thr, Asn, and Val have been constructed. Kinetic analysis of these enzymes with penicillins and cephalosporins suggests that a hydrogen bond is necessary but not sufficient to achieve the hydrolytic activity of the G238S enzyme for the extended-spectrum antibiotics cefotaxime and ceftazidime. In addition, it appears that the new hydrogen bond interaction is to a site on the enzyme rather than directly to the extended-spectrum antibiotic. The data indicate that, for the G238S substitution, a combination of an optimal side chain volume and hydrogen bonding potential results in the most versatile and advantageous antibiotic hydrolytic spectrum for bacterial resistance to extended-spectrum antibiotics.

Systematic mutagenesis of the active site omega loop of TEM-1 beta-lactamase.

Beta-Lactamase is a bacterial protein that provides resistance against beta-lactam antibiotics. TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Normally, this enzyme has high levels of hydrolytic activity for penicillins, but mutant beta-lactamases have evolved with activity toward a variety of beta-lactam antibiotics. It has been shown that active site substitutions are responsible for changes in the substrate specificity. Since mutant beta-lactamases pose a serious threat to antimicrobial therapy, the mechanisms by which mutations can alter the substrate specificity of TEM-1 beta-lactamase are of interest. Previously, screens of random libraries encompassing 31 of 55 active site amino acid positions enabled the identification of the residues responsible for maintaining the substrate specificity of TEM-1 beta-lactamase. In addition to substitutions found in clinical isolates, many other specificity-altering mutations were also identified. Interestingly, many nonspecific substitutions in the N-terminal half of the active site omega loop were found to increase ceftazidime hydrolytic activity and decrease ampicillin hydrolytic activity. To complete the active sight study, eight additional random libraries were constructed and screened for specificity-altering mutations. All additional substitutions found to alter the substrate specificity were located in the C-terminal half of the active site loop. These mutants, much like the N-terminal omega loop mutants, appear to be less stable than the wild-type enzyme. Further analysis of a 165-YYG-167 triple mutant, selected for high levels of ceftazidime hydrolytic activity, provides an example of the correlation which exists between enzyme instability and increased ceftazidime hydrolytic activity in the ceftazidime-selected omega loop mutants.

A yeast replication origin consists of multiple copies of a small conserved sequence.

Autonomously replicating sequences (ARSs) of the yeast S. cerevisiae function as replication origins on plasmids and probably also on chromosomes. ARS function requires a copy of the ARS core consensus (5'-[A/T]TTTAT[A/G]TTT[A/T]-3') and additional sequences 3' to the T-rich strand of the consensus. Our analysis of an ARS from chromosome III, the C2G1 ARS, suggests that ARS function depends on the presence of an exact match to the core consensus and the presence of additional near matches in the 3' flanking region. We have demonstrated that ARS function can be mediated by multiple matches to the core consensus by constructing synthetic ARS elements from oligonucleotides containing copies of the consensus sequence. We find that two copies of the core consensus are sufficient for ARS activity and that an artificial ARS as efficient as a natural chromosomal ARS can be constructed from multiple core consensus elements in a specific orientation.

Selection and characterization of amino acid substitutions at residues 237-240 of TEM-1 beta-lactamase with altered substrate specificity for aztreonam and ceftazidime.

Recently, natural variants of TEM-1 beta-lactamase with amino acid substitutions at residues 237-240 have been identified that have increased hydrolytic activity for extended-spectrum antibiotics such as ceftazidime. To identify the sequence requirements in this region for a given antibiotic, a random library was constructed that contained all possible amino acid combinations for the 3-residue region 237-240 (ABL numbering system) of TEM-1 beta-lactamase. An antibiotic disc diffusion method was used to select mutants with wild-type level activity or greater for the extended-spectrum cephalosporin ceftazidime and the monobactam aztreonam. Mutants that were selected for optimal ceftazidime hydrolysis contained a conserved Ala at position 237, a Ser for Gly substitution at position 238, and a Lys for Glu at position 240. Mutants selected for aztreonam hydrolysis exhibited a Gly for Ala substitution at position 237, a Ser for Gly substitution at position 238, and a Lys/Arg for Glu at position 240. The role of the A237G substitution in differentiating between ceftazidime and aztreonam was further investigated by kinetic analysis of the A237G, E240K, G238S:E240K, and A237G:G238S:E240K enzymes. The A237G single mutant and the G238S:E240K double mutant exhibited increases in catalytic efficiency for both ceftazidime and aztreonam. However, the triple mutant A237G:G238S:E240K, displayed a 12-fold decrease in catalytic efficiency for ceftazidime but a 3-fold increase for aztreonam relative to the G238S:E240K double mutant. Thus, the A237G substitution increases ceftazidime hydrolysis when present alone but antagonizes ceftazidime hydrolysis when it is combined with the G238S:E240K substitutions. In contrast, the A237G substitution acts additively with the G238S:E240K substitutions to increase aztreonam hydrolysis.

Enzymes involved in oxygen detoxification during development of Drosophila melanogaster.

Activities of superoxide dismutase (SOD), catalase (CAT), and peroxidases (PER) were examined at 24-h intervals during Drosophila development. SOD activities show a U-shaped curve from egg to adult stages whereas CAT and PER are consistently low in egg through larval stages. Male and female larvae have similar activities of SOD, CAT, and PER whereas male adults have elevated activities of these enzymes. Larvae are more sensitive to H2O2 and 3-amino-1,2,4-triazole (an inhibitor of CAT) than adults.

Design of potent beta-lactamase inhibitors by phage display of beta-lactamase inhibitory protein.

Beta-lactamase inhibitory protein (BLIP) binds tightly to several beta-lactamases including TEM-1 beta-lactamase (K(i) 0.1 nm). The TEM-1 beta-lactamase/BLIP co-crystal structure indicates that two turn regions in BLIP insert into the active site of beta-lactamase to block the binding of beta-lactam antibiotics. Residues from each turn, Asp(49) and Phe(142), mimic interactions made by penicillin G when bound in the beta-lactamase active site. Phage display was used to determine which residues within the turn regions of BLIP are critical for binding TEM-1 beta-lactamase. The sequences of a set of functional mutants from each library indicated that a few sequence types were predominant. These BLIP mutants exhibited K(i) values for beta-lactamase inhibition ranging from 0.01 to 0.2 nm. The results indicate that even though BLIP is a potent inhibitor of TEM-1 beta-lactamase, the wild-type sequence of the active site binding region is not optimal and that derivatives of BLIP that bind beta-lactamase extremely tightly can be obtained. Importantly, all of the tight binding BLIP mutants have sequences that would be predicted theoretically to form turn structures.

Cephalosporin substrate specificity determinants of TEM-1 beta-lactamase.

beta-lactamase is a bacterial enzyme that catalyzes the hydrolysis of beta-lactam antibiotics such as penicillins and cephalosporins. TEM-1 beta-lactamase is a prevalent beta-lactamase found in Gram-negative bacteria and is capable of hydrolyzing both penicillins and cephalosporins, except for the extended-spectrum cephalosporins. To identify the sequence determinants in the active site for a given antibiotic substrate, random libraries were constructed that each contain all possible amino acid combinations for the designated region of TEM-1 beta-lactamase. To establish the determinants of substrate specificity for cephalosporins versus those for penicillins, these active site libraries have been screened for mutants with high levels of activity for the second generation cephalosporin cephaloridine. Based on the sequence results, substitutions of W165S, A237T, and E240C were identified as cephalosporin-specific. Kinetic analysis of these mutants was done to determine whether each is capable of distinguishing between the two classes of antibiotics. Both the A237T and E240C substitutions, alone or in combination, exhibited increased cephalosporinase activity and decreased penicillinase activity relative to the wild-type enzyme. A sequence comparison between functional mutants selected for cephaloridine hydrolytic activity and functional mutants previously selected for ampicillin hydrolytic activity suggests that TEM-1 beta-lactamase has greater restrictions in maintaining cephalosporinase activity versus maintaining penicillinase activity.

Display of functional beta-lactamase inhibitory protein on the surface of M13 bacteriophage.

The display of proteins on the surface of filamentous phage has been shown to be a powerful method to select variants of a protein with altered binding properties from large combinatorial libraries of mutants. The beta-lactamase inhibitory protein (BLIP) is a 165-amino-acid protein that binds and inhibits TEM-1 beta-lactamase-catalyzed hydrolysis of the penicillin and cephalosporin antibiotics. Here we describe the construction of a new phagemid vector and the use of this vector to display BLIP on the surface of filamentous phage. It is shown that BLIP-displaying phage bind to immobilized beta-lactamase and that the binding can be competed off by the addition of soluble beta-lactamase. In addition, a two-step phage enzyme-linked immunosorbent assay procedure was used to demonstrate that the BLIP-displaying phage bind beta-lactamase with a 50% inhibitory concentration of 1 nM, which compares favorably with a previously published Ki of 0.6 nM. A system has therefore been established for protein engineering of BLIP to expand its range of binding to other beta-lactamases and penicillin-binding proteins.

Identification of residues in beta-lactamase critical for binding beta-lactamase inhibitory protein.

beta-Lactamase inhibitory protein (BLIP) is a potent inhibitor of several beta-lactamases including TEM-1 beta-lactamase (Ki = 0.1 nM). The co-crystal structure of TEM-1 beta-lactamase and BLIP has been solved, revealing the contact residues involved in the interface between the enzyme and inhibitor. To determine which residues in TEM-1 beta-lactamase are critical for binding BLIP, the method of monovalent phage display was employed. Random mutants of TEM-1 beta-lactamase in the 99-114 loop-helix and 235-240 B3 beta-strand regions were displayed as fusion proteins on the surface of the M13 bacteriophage. Functional mutants were selected based on the ability to bind BLIP. After three rounds of enrichment, the sequences of a collection of functional beta-lactamase mutants revealed a consensus sequence for the binding of BLIP. Seven loop-helix residues including Asp-101, Leu-102, Val-103, Ser-106, Pro-107, Thr-109, and His-112 and three B3 beta-strand residues including Ser-235, Gly-236, and Gly-238 were found to be critical for tight binding of BLIP. In addition, the selected beta-lactamase mutants A113L/T114R and E240K were found to increase binding of BLIP by over 6- and 11-fold, respectively. Combining these substitutions resulted in 550-fold tighter binding between the enzyme and BLIP with a Ki of 0.40 pM. These results reveal that the binding between TEM-1 beta-lactamase and BLIP can be improved and that there are a large number of sequences consistent with tight binding between BLIP and beta-lactamase.

Protein minimization by random fragmentation and selection.

Protein-protein interactions are involved in most biological processes and are important targets for drug design. Over the past decade, there has been increased interest in the design of small molecules that mimic functional epitopes of protein inhibitors. BLIP is a 165 amino acid protein that is a potent inhibitor of TEM-1 beta-lactamase (K(i) = 0.1 nM). To aid in the development of new inhibitors of beta-lactamase, the gene encoding BLIP was randomly fragmented and DNA segments encoding peptides that retain the ability to bind TEM-1 beta-lactamase were isolated using phage display. The selected peptides revealed a common, overlapping region that includes BLIP residues C30-D49. Synthesis and binding analysis of the C30-D49 peptide indicate that this peptide inhibits TEM-1 beta-lactamase. Therefore, a peptide derivative of BLIP that has been reduced in size by 88% compared with wild-type BLIP retains the ability to bind and inhibit beta-lactamase.