More light components and less light damage on rats' eyes: evidence for the photobiomodulation and spectral opponency.

The blue-light hazard (BLH) has raised concerns with the increasing applications of white light-emitting diodes (LEDs). Many researchers believed that the shorter wavelength or more light components generally resulted in more severe retinal damage. In this study, based on the conventional phosphor-coated white LED, we added azure (484 nm), cyan (511 nm), and red (664 nm) light to fabricate the low-hazard light source. The low-hazard light sources and conventional white LED illuminated 68 Sprague-Dawley (SD) rats for 7 days. Before and after light exposure, we measured the retinal function, thickness of retinal layers, and fundus photographs. The expression levels of autophagy-related proteins and the activities of oxidation-related biochemical indicators were also measured to investigate the mechanisms of damaging or protecting the retina. With the same correlated color temperature (CCT), the low-hazard light source results in significantly less damage on the retinal function and photoreceptors, even if it has two times illuminance and blue-light hazard-weighted irradiance ([Formula: see text]) than conventional white LED. The results illustrated that [Formula: see text] proposed by IEC 62471 could not exactly evaluate the light damage on rats' retinas. We also figured out that more light components could result in less light damage, which provided evidence for the photobiomodulation (PBM) and spectral opponency on light damage.

Enhanced light extraction efficiency of an LED package by a surface-mounted amorphous photonic structure.

In this study, we propose a low-cost, simple and feasible post-processing approach to improve the light extraction efficiency (LEE) of LED packages. Amorphous photonic structures (APSs) with only short-range order are fabricated from anodic aluminum oxide (AAO) and transferred to intermediate polymer stamp (IPS) by nanoimprint technology. The IPS with APSs is directly mounted onto the surface of an LED package, where the LEE is achieved as 94.6%. The scanning electron microscope (SEM) images of AAO templates and imprinted IPS are analyzed by radial distribution function and diameter histogram. The far-field patterns of APS-mounted LED packages are measured in electroluminescence (EL). The three-dimensional finite-difference time-domain (3D-FDTD) calculations of transmittance of APSs confirm that they improve the light extraction above the critical angle. Two-dimensional Fourier power spectra from SEM images of APSs are also calculated. The LEE enhancement is attributed to that the APSs have short-range order on a length scale comparable to emission wavelength of LED. We provide novel multistage simulations in a simplified FDTD model for the LED package. Finally, we discuss the influence of the morphology of APSs on the LEE of the APS mounted LEDs.

Investigation on many-body effects in micro-LEDs under ultra-high injection levels.

Micro-LEDs can work under an extremely high injection level and are widely used in high-brightness micro-displays and visible light communication. With the increase of carrier concentration, many-body effects gradually become important factors affecting devices' characteristics. Considering the effects of carrier scattering, bandgap renormalization, and Coulomb enhancement (CE), changes in the electroluminescence spectra of micro-LEDs are analyzed as the current density increases from 49.2 to 358.2 kA/cm2, the latter representing an ultra-high injection level. Affected by plasma screening, CE decreases below about 150 kA/cm2. After that, polarization screening dominates and effectively alleviates the spatial separation of electrons and holes, which results in CE increases to the maximum injection level of 358.2 kA/cm2. It is established that CE promotes radiative recombination processes. Different from the traditional phenomenon of "efficiency droop", the enhanced attraction between carriers leads to an abnormal increase of external quantum efficiency at high current density.

A Novel Way to Fill Green Gap of GaN-Based LEDs by Pinning Defects in Nanorod Array.

Nanorod array and planar green-emission InGaN/GaN multi-quantum well (MQW) LEDs were fabricated by lithography, nano-imprinting, and top-down etching technology. The defect-pinning effect of the nanostructure was found for the first time. The ratio of the bright regions to the global area in the panchromatic CL images of green MQW samples increased from 30% to about 90% after nano-fabrication. The overall luminous performance significantly improved. Throughout temperature-dependent photoluminescence (TDPL) and time-resolved PL (TRPL) measurements, the migration and recombination of carriers in the MQWs of green LEDs were analyzed. It was proved that nanostructures can effectively prevent carriers from being captured by surrounding nonradiative recombination centers. The overall PL integral intensity can be enhanced to above 18 times. A much lower carrier lifetime (decreasing from 91.4 to 40.2 ns) and a higher internal quantum efficiency (IQE) (increasing from 16.9% to 40.7%) were achieved. Some disputes on the defect influence were also discussed and clarified.

The effects of dynamic daylight-like light on the rhythm, cognition, and mood of irregular shift workers in closed environment.

Shift workers are mostly suffered from the disruption of circadian rhythm and health problems. In this study, we designed proper light environment to maintain stable circadian rhythm, cognitive performance, and mood status of shift workers. We used five-channel light-emitting diodes to build up the dynamic daylight-like light environment. The illuminance, correlated color temperature, and circadian action factor of light were tunable in the ranges of 226 to 678 lx, 2680 to 7314 K, and 0.32 to 0.96 throughout the day (5:30 to 19:40). During the nighttime, these parameters maintained about 200 lx, 2700 K, and 0.32, respectively. In this light environment, three subjects had engaged in shift work for 38 consecutive days. We measured plasma melatonin, activity counts, continuous performance tests, and visual analogue scale on mood to assess the rhythm, cognitive performance, and mood of subjects. After 38-day shift work, the subjects' peak melatonin concentration increased significantly. Their physiological and behavioral rhythms maintained stable. Their cognitive performance improved significantly after night work, compared with that before night work. Their mood status had no significant change during the 38-day shift work. These results indicated that the light environment was beneficial to maintain circadian rhythm, cognitive performance and mood status during long-term shift work in closed environment.

Study on Electron-Induced Surface Plasmon Coupling with Quantum Well Using a Perturbation Method.

Ag nanoparticles (NPs) are filled in a photonic crystal (PhC) hole array on green light emitting diodes (LEDs). The localized surface plasmon (LSP)-quantum well (QW) coupling effect is studied by measuring the cathodoluminescence (CL) spectra impinging at the specific spots on the Ag NPs. Twenty-six percent and fifty-two percent enhancements of the CL intensities are obtained at the center and edge of the Ag NP, respectively, compared to the result that the electron-beam (e-beam) excites the QW directly. To illustrate the coupling process of the three-body system of e-beam-LSP-QW, a perturbation theory combining a three-dimensional (3D) finite difference time domain (FDTD) simulation is put forward. The effects of the polarization orientation of the dipole and the field symmetry of the LSP on the LSP-QW coupling are also discussed.

Investigation on entraining and enhancing human circadian rhythm in closed environments using daylight-like LED mixed lighting.

Humans can undergo circadian disruption and misalignment when living in closed environments without sufficient daylight. Therefore, it is of great significance to investigate the effects of artificial light on the circadian rhythm. In this work, the red, green, blue, warm white, and cool white (RGBWW) five-channel light-emitting diodes (LEDs) were fabricated as the only light sources in the closed environment. The LED mixed lighting showed a high color rendering index (CRI) all the time. During the day, the light simulated the daylight and increased the tunability of the circadian action factor (CAF) and correlated color temperature (CCT). At night, it maintained low CAF and CCT. Three subjects did irregular shift work in the closed environment for 38 days. Their plasma melatonin and daily activity were measured to assess the circadian rhythm. After 38 days, the subjects' peak melatonin times did not shift significantly (p = 0.676), while their peak melatonin concentrations increased apparently (p = 0.005). The start times of the least active 5-h period (L5) in one day fluctuated in a small range. The standard deviation (SD) was <15.11 min in most times. These results demonstrated that the subjects' rhythms maintained stable and were enhanced. The periods of circular cross-correlation between activity and CAF oscillated around 24 h (SD = 15.4 min), indicating the entrainment of light on the stable 24-h rhythm. It was concluded that the daylight-like LED lighting effectively entrained and enhanced the circadian rhythm in the closed environment.