RESUMO
Lanzhou, which is a valley city on the Loess Plateau, frequently suffered from aerosol pollution in recent years, especially in winter. However, the lack of understanding of factors governing aerosol pollution limits the implementation of effective emission policies in and around Lanzhou. To help solve this problem, an intensive field campaign was conducted at the SACOL site, which is a suburban site near Lanzhou, in winter 2018. The chemical characteristics and sources of submicron particulate matter (PM1) were investigated, and the influence of the topography around Lanzhou on aerosol pollution was examined. In the present study, the average PM1 mass concentration reached 25.6 ± 12.8 µg m-3, with 41.0% organics, 16.1% sulfate, 19.7% nitrate, 10.7% ammonium, 3.1% chloride, and 9.4% black carbon (BC). Three organic aerosol (OA) factors were identified with the positive matrix factorization (PMF) algorithm, including a biomass burning OA (BBOA, 13.6%), a coal combustion OA (CCOA, 34.2%), and an oxygenated OA (OOA, 52.2%). The significant relationships between organics, BC, and chloride and wind pattern suggested that the SACOL site was strongly influenced by regionally transported aerosols. Further analysis suggested that these aerosol regional transport events were caused by topography. Due to the limitation of the valley, aerosols accumulated in the valley. These accumulated aerosols were then transported to the SACOL site along the valley by prevailing winds. Our study highlights enhanced aerosol regional transport in valleys, which provides a new perspective for future studies on aerosol pollution in basins and valleys.
Assuntos
Poluentes Atmosféricos , Material Particulado , Aerossóis/análise , Poluentes Atmosféricos/análise , China , Cloretos/análise , Monitoramento Ambiental , Material Particulado/análise , Fuligem/análiseRESUMO
High-efficiency organic solar cells (OSCs) largely rely on polymer donors. Herein, we report a new building block BNT and a relevant polymer PBNT-BDD featuring B-N covalent bond for application in OSCs. The BNT unit is synthesized in only 3 steps, leading to the facile synthesis of PBNT-BDD. When blended with a nonfullerene acceptor Y6-BO, PBNT-BDD afforded a power conversion efficiency (PCE) of 16.1 % in an OSC, comparable to the benzo[1,2-b:4,5-b']dithiophene (BDT)-based counterpart. The nonradiative recombination energy loss of 0.19â eV was afforded by PBNT-BDD. PBNT-BDD also exhibited weak crystallinity and appropriate miscibility with Y6-BO, benefitting of morphological stability. The singlet-triplet gap (ΔEST ) of PBNT-BDD is as low as 0.15â eV, which is much lower than those of common organic semiconductors (≥0.6â eV). As a result, the triplet state of PBNT-BDD is higher than the charge transfer (CT) state, which would suppress the recombination via triplet state effectively.
RESUMO
The packing mode of small-molecular semiconductors in thin films is an important factor that controls the performance of their optoelectronic devices. Designing and changing the packing mode by molecular engineering is challenging. Three structurally related diketopyrrolopyrrole (DPP)-based compounds were synthesized to study the effect of replacing C-C bonds by isoelectronic dipolar BâN bonds. By replacing one of the bridging C-C bonds on the peripheral fluorene units of the DPP molecules by a coordinative BâN bond and changing the BâN bond orientation, the optical absorption, fluorescence, and excited-state lifetime of the compounds can be tuned. The substitution alters the preferential aggregation of the molecules in the solid state from H-type (for C-C) to J-type (for BâN). Introducing BâN bonds thus provides a subtle way of controlling the packing mode. The photovoltaic properties of the compounds were evaluated in bulk heterojunctions with a fullerene acceptor and showed moderate performance as a consequence of suboptimal morphologies, bimolecular recombination, and triplet-state formation.
RESUMO
A wide-bandgap conjugated polymer, PNQx-2F2T, based on a ring-fused unit of quinoxalino[6,5-f ]quinoxaline (NQx), is synthesized for use as electron donor in polymer solar cells (PSCs). The polymer shows intense light absorption in the range from 300 to 740 nm and favorable energy levels of frontier molecular orbitals. The polymer has afforded decent device performance when blended with either fullerene-based acceptor [6,6]-phenyl-C71 -butylric acid methyl ester ([70]PCBM) or non-fullerene acceptor 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone-methyl))-5,5,11,11-tetrakis(4-n-hexylphenyl)-dithieno[2,3-d: 2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IT-M). The highest PCEs of 7.9% and 7.5% have been achieved for [70]PCBM or IT-M based PSCs, respectively. Moreover, the influence of molecular weight of PNQx-2F2T on solar cell performance has been investigated. It is found that fullerene-based devices prefer higher polymer molecular weight, while non-fullerene devices are not susceptible to the molecular weight of PNQx-2F2T. The device results are extensively explained by electrical and morphological characterizations. This work not only evidences the potential of NQx for constructing high-performance photovoltaic polymers but also demonstrates a useful structure-performance relationship for efficiency enhancement of non-fullerene PSCs via the development of new conjugated polymers.
Assuntos
Fulerenos/química , Polímeros/química , Quinoxalinas/química , Energia Solar , Estrutura MolecularRESUMO
PURPOSE: To compare and analyze the orthodontic effects of micro-implant screw support and flat guide plate on excessive deep overbite of lower anterior teeth. METHODS: Eighty-two patients with excessive deep overbite of the lower anterior teeth who were treated from January to December 2022 were selected and randomly divided into two groups (41 in each group) by random number table method. Both groups were treated with straight wire arch orthodontic technology, and the anterior teeth were supported by micro-implant screws (micro-implant screw group) and flat guide plates (flat guide plate group), respectively. The effect of upper anterior tooth compression, changes in occlusal plane, and apical absorption were compared between the two groups. SPSS 25.0 software package was used for statistical analysis. RESULTS: There were no significant changes in SNA angle, SNB angle, ANB angle, U1-PP, U6-PP, and L6-MP before and after treatment between the two groups (Pï¼0.05). L1-MP significantly increased in both groups after treatment than before treatment(Pï¼0.05). There was no significant difference in bite opening, Spee curve depth, U1 depression, L1 depression, U6 elongation, L6 elongation and occlusal opening time between the two groups before and after treatment(Pï¼0.05). The root apex absorption of the mandibular central incisors and lateral incisors in the micro-implant screw group was significantly lower than that in the flat guide plate group(Pï¼0.05), while there was no significant difference in root apex absorption between the two groups of canines(Pï¼0.05). CONCLUSIONS: Both micro-implant screw support and flat guide plate can effectively lower the mandibular anterior teeth in the treatment of deep overbite in adults, with good orthodontic effects. However, the latter can lead to increased root resorption.
Assuntos
Parafusos Ósseos , Sobremordida , Humanos , Sobremordida/terapia , Implantes Dentários , Mandíbula/cirurgia , Incisivo , Procedimentos de Ancoragem Ortodôntica/instrumentação , Procedimentos de Ancoragem Ortodôntica/métodosRESUMO
Donor polymers play a key role in the development of organic solar cells (OSCs). B-N-based polymer donors, as new types of materials, have attracted a lot of attention due to their special characteristics, such as high E(T1), small ΔEST, and easy synthesis, and they can be processed with real green solvents. However, the relationship between the chemical structure and device performance has not been systematically studied. Herein, chalcogen atoms that regulate the OSCs performance of B-N-based polymer donors were systematically studied. Fortunately, the substitution of a halogen atom did not affect the high E(T1) and small ΔEST character of the B-N-based polymer. The absorption and energy levels of the polymer were systematically regulated by O, S, and Se atom substitution. The PBNT-TAZ:Y6-BO-based OSCs device demonstrated a high power conversion efficiency of 15.36%. Moreover, the layer-by-layer method was applied to further optimize the device performance, and the PBNT-TAZ/Y6-BO-based OSCs device yielded a PCE of 16.34%. Consequently, we have systematically demonstrated how chalcogen atoms modulated the electronic properties of B-N-based polymers. Detailed and systematic structure-performance relationships are important for the development of next-generation B-N-based materials.
RESUMO
PURPOSE: To observe the effect of orthodontics combined with restoration on masticatory function in deep overbite patients with severe lower anterior teeth attrition. METHODS: From January 2018 to January 2022, a total of 164 deep overbite patients with severe lower anterior teeth attrition were collected and divided into two groups according to different treatment plans: control group(72 patients, with restoration treatment) and experimental group(92 patients, with orthodontics combined with restoration treatment). The chewing efficiency of the two groups was evaluated, temporomandibular joint dysfunction index (DI), muscle palpation index (PI) and cranio-mandibular index (CMI) were calculated. The satisfaction with facial esthetic, the Chinese version of Oral Health Impact Scale-14(OHIP-14) and the repair satisfaction score were evaluated, the occurrence of adverse events between the two groups was compared. SPSS 23.0 software package was used for statistical analysis. RESULTS: After treatment, the chewing efficiency of the experimental group was significantly improved compared to the control group, while the DI, PI, and CMI were significantly reduced compared to the control group(Pï¼0.05). Compared with the control group, the satisfaction degree with facial esthetic and restoration in the experimental group was significantly higher, while the OHIP-14 score was significantly lower after treatment(Pï¼0.05). The incidence of adverse events in the experimental group was significantly decreased compared with the control group (6.52% vs 25.00%, Pï¼0.05). CONCLUSIONS: Combination of orthodontics and restoration treatment can enhance the effectiveness of restoration treatment for deep overbite with severe lower anterior teeth attrition, improve the mastication function and temporomandibular joint balance,satisfaction and quality of life of patients, as well as reduce the risk of adverse events.
Assuntos
Mastigação , Sobremordida , Humanos , Sobremordida/terapia , Ortodontia/métodos , Ortodontia Corretiva/métodos , Satisfação do Paciente , Transtornos da Articulação Temporomandibular/terapiaRESUMO
The fabrication of organic solar cells (OSCs) depends heavily on the use of highly toxic chlorinated solvents, which are incompatible with industrial manufacturing. The reported alternative solvents such as non-halogenated aromatic hydrocarbons and cyclic ethers are also not really "green" according to the "Globally Harmonized System of Classification and Labelling of Chemicals" of the United Nations. Therefore, processing from real green solvents such as water, alcohols, or anisole will constitute a big breakthrough for OSCs. However, it is fundamentally challenging to obtain high-performance photovoltaic materials processable from these solvents. Herein, we propose the incorporation of a B-N covalent bond, which has a dipole moment of 1.84 Debye, into the conjugated backbone of polymer donors to fabricate high-efficiency OSCs from anisole, a real green and eco-compatible solvent recommended by the United Nations. Based on a newly developed B-N-based polymer, the OSCs with a record-high efficiency of 15.65% in the 0.04 cm2 device and 14.01% in the 1.10 cm2 device have thus been realized via real green processing.
RESUMO
Focal segmental glomerulosclerosis (FSGS) is a type of chronic glomerular nephropathy showing characteristic glomerular sclerosis, diagnosed by kidney biopsy. However, it is difficult and expensive to monitor disease progression with repeated renal biopsy in clinical practice, and thus here we explored the feasibility of urine biomarkers as non-invasive diagnostic tools. We downloaded scRNA-seq datasets of 20 urine cell samples and 3 kidney tissues and obtained two gene lists encoding extracellular proteins for bioinformatic analysis; in addition, we identified key EP-Genes by immunohistochemical staining and performed bulk RNA sequencing with 12 urine samples. We report that urine cells and kidney cells were correlated. A total of 64 EP-Genes were acquired by intersecting genes of distal tubular cluster with extracellular proteins. Function enrichment analysis showed that EP-Genes might be involved in the immune response and extracellular components. Six key EP-Genes were identified and correlated with renal function. IMC showed that key EP-Genes were located mainly in tubules. Cross verification and examination of a urine RNAseq dataset showed that SPP1 had diagnostic potential for FSGS. The presence of urine SPP1 was primarily associated with macrophage infiltration in kidney, and the pathogenesis of FSGS may be related to innate immunity. Urinary cells seemed to be strongly similar to kidney cells. In summary, SPP1 levels reflect renal function and may have potential as a biomarker for non-invasive diagnosis of FSGS.
Assuntos
Glomerulosclerose Segmentar e Focal , Insuficiência Renal Crônica , Humanos , Glomerulosclerose Segmentar e Focal/diagnóstico , Glomerulosclerose Segmentar e Focal/genética , Glomerulosclerose Segmentar e Focal/complicações , Rim/patologia , Progressão da Doença , OsteopontinaRESUMO
Purpose: Chronic kidney disease (CKD) progression is complex. There are not standardized methods for predicting the prognosis of CKD. Nicotinamide N-methyltransferase (NNMT) has been shown to be associated with renal fibrosis. This study aimed to validate NNMT as a prognostic biomarker of progressive CKD. Patients and Methods: We explored the relationship between NNMT expression and CKD-related outcome variables using the NephroseqV5 and GEO databases. Additionally, a validation set of 37 CKD patients was enrolled to measure the correlation between NNMT expression levels and CKD outcomes. Furthermore, single-cell RNA sequencing data and the Human Protein Atlas were reanalyzed to investigate the expression specificity of NNMT in the kidney. Finally, to detect the status of NNMT expression with tubular fibrosis in vivo, we constructed a unilateral ureteral obstruction (UUO) mouse treated with an NNMT inhibitor. Results: Analyzing the datasets showed that NNMT was expressed mainly in proximal tubule compartments. And patients with high NNMT expression levels had a significantly lower overall survival rate compared to those with low NNMT expression levels (P = 0.013). NNMT was independent of prognosis factors in the multivariate Cox regression model, and the AUCs for CKD progression at 1, 3, and 5 years were 0.849, 0.775, and 0.877, respectively. Pathway enrichment analysis indicated that NNMT regulates the biological processes of tubulointerstitial fibrosis (TIF). In the validation group, NNMT levels were significantly higher in the CKD group combined with interstitial fibrosis. In vivo, NNMT was a high expression in the UUO group, peaking at postoperative day 21. Treatment with an NNMT inhibitor improved renal tubular interstitial fibrosis, and expression levels of FN, α-SMA, VIM, and TGF-ß1 were decreased compared with UUO (P < 0.05). Conclusion: NNMT was expressed mainly in tubular renal compartments, and associated with CKD prognosis. It holds potential as a diagnostic biomarker for tubular fibrosis in CKD.
RESUMO
PURPOSE: To investigate the effectiveness of combined orthodontic and restoration treatment for introverted deep overbite patients with severe wear. METHODS: A total of 86 introverted deep overbite patients with severe wear admitted to Cangzhou People's Hospital from December 2020 to June 2022 were collected and divided into the control group and the experimental group by gender, age, degree of wear and tear, with 43 cases in each group. The control group received orthodontic treatment, while the experimental group received combined orthodontic and restoration treatment. The gingival index (GI), periodontal index(PI), smile index, temporomandibular joint space [anterior space, superior space, posterior space and In (P/A)], tooth function (chewing function, pronunciation function, dental occlusal function) and chewing efficiency of 2 groups before and after treatment were compared. Statistical analysis was performed with SPSS 22.0 software package. RESULTS: Compared with the control group, the orthodontic treatment time of the experimental group patients was significantly reduced(Pï¼0.05). Before treatment, there was no significant difference in GI, PI, smile index, buccal gap rate, temporomandibular joint space, swallowing function and chewing efficiency between 2 groups(Pï¼0.05). After treatment, compared with the control group, the GI, PI, anterior space were significantly reduced(Pï¼0.05); the smile index, posterior space and In (P/A), chewing function, pronunciation function, tooth occlusion and chewing efficiency significantly increased (Pï¼0.05). CONCLUSIONS: Both orthodontic treatment and combined orthodontic and restoration treatment can be used to treat introverted deep overbite patients with severe wear. However, combination of orthodontic and restoration treatment has significant advantages.
Assuntos
Sobremordida , Humanos , Articulação Temporomandibular , MastigaçãoRESUMO
BNTT2F, an electron acceptor featuring a B-N covalent bond and singlet-triplet gap as low as 0.20 eV via the multiple resonance effect, is developed for organic solar cells. The optimized device based on BNTT2F offered an efficiency of 8.3%, suggesting the great prospect of B-N covalent bond-containing π-conjugated molecules for photovoltaics.
RESUMO
Polymer-based dielectrics have been attracted much attention to flexible energy storage devices due to their rapid charge-discharge rate, flexibility, lightness and compactness. Nevertheless, the energy storage performance of these dielectric polymers was limited by the weak dielectric breakdown properties. Crosslinked structure has been proven efficient to enhance breakdown strength (E b) and charge-discharge efficiency (η) of polymer film capacitors. However, crosslinked networks usually lead to low electric displacement of dielectric capacitors, which greatly restrict their energy storage density (U d). In this work, we present a tri-layered composite via layer-by-layer casting technology, where crosslinked polyvinylidene fluoride (c-PVDF) was used as the inter-layer to offer high breakdown strength, and the outer ternary fluoropolymer layers with high dielectric constant could provide high electric displacement. The optimal tri-layered composites exhibit an ultrahigh discharge energy density of 18.3 J cm-3 and a discharge efficiency of 60.6% at 550 kV mm-1. This energy density is much higher than that of the PVDF terpolymer and commercially biaxially oriented polypropylene (BOPP, 1-2 J cm-3). The simulation results prove that the enhanced energy density originates from the effectively depressed charge transport in crosslinked structure at high applied electric field. Moreover, this work provides a feasible method for developing flexible all-organic high-energy-density composites for polymer capacitors.
RESUMO
All-polymer solar cells (all-PSCs) composed of polymer donors and acceptors have attracted widespread attention in recent years. However, the broad and efficient photon utilization of polymer:polymer blend films remains challenging. In our previous work, we developed NOE10, a linear oligoethylene oxide (OE) side-chain modified naphthalene diimide (NDI)-based polymer acceptor which exhibited a power conversion efficiency (PCE) of 8.1% when blended with a wide-bandgap polymer donor PBDT-TAZ. Herein, we report a ternary all-PSC strategy of incorporating a state-of-the-art narrow bandgap polymer (PTB7-Th) into the PBDT-TAZ:NOE10 binary system, which enables 8.5% PCEs within a broad ternary polymer ratio. We further demonstrate that, compared to the binary system, the improved photovoltaic performance of ternary all-PSCs benefits from the combined effect of enhanced photon absorption, more efficient charge generation, and balanced charge transport. Meanwhile, similar to the binary system, the ternary all-PSC also shows excellent thermal stability, maintaining 98% initial PCE after aging for 300 h at 65°C. This work demonstrates that the introduction of a narrow-bandgap polymer as a third photoactive component into ternary all-PSCs is an effective strategy to realize highly efficient and stable all-PSCs.
RESUMO
Nonfullerene acceptors (NFAs) have contributed significantly to the progress of organic solar cells (OSCs). However, most NFAs feature a large fused-ring backbone, which usually requires a tedious multiple-step synthesis, and are not applicable to commercial applications. An alternative strategy is to develop nonfused NFAs, which possess synthetic simplicity and facile tunability in optoelectronic properties and solid-state microstructures. In this work, we report two nonfused NFAs, BTCIC and BTCIC-4Cl, based on an A-D-A'-D-A architecture, which possess the same electron-deficient benzothiadiazole central core but different electron-withdrawing terminal groups. The optical properties, energy levels, and molecular crystallinities were finely tuned by changing the terminal groups. Moreover, a decent power conversion efficiency of 9.3 and 10.5% has been achieved by BTCIC and BTCIC-4Cl, respectively, by blending them with an appropriate polymer donor. These results demonstrate the potential of A-D-A'-D-A type nonfused NFAs for high-performance OSCs. Further development of nonfused NFAs will be very fruitful by employing appropriate building blocks and via side-chain optimizations.
RESUMO
Developing effective methods to make efficient bulk-heterojunction polymer solar cells at roll-to-roll relevant active layer thickness is of significant importance. We investigate the effect of fullerene content in polymer:fullerene blends on the fill factor (FF) and on the performance of thick-film solar cells for four different donor polymers PTB7-Th, PDPP-TPT, BDT-FBT-2T, and poly[5,5'-bis(2-butyloctyl)-(2,2'-bithiophene)-4,4'-dicarboxylate- alt-5,5'-2,2'-bithiophene] (PDCBT). At a few hundreds of nanometers thickness, increased FFs are observed in all cases and improved overall device performances are obtained except for PDCBT upon increasing fullerene content in blend films. This fullerene content effect was studied in more detail by electrical and morphological characterization. The results suggest enhanced electron mobility and suppressed bimolecular recombination upon increasing fullerene content in thick polymer:fullerene blend films, which are the result of larger fullerene aggregates and improved interconnectivity of the fullerene phases that provide continuous percolating pathways for electron transport in thick films. These findings are important because an effective and straightforward method that enables fabricating efficient thick-film polymer solar cells is desirable for large-scale manufacturing via roll-to-roll processing and for multijunction devices.