RESUMO
In this study, the deployment of post Reverse Osmosis (RO)-carbon as a adsorbent for dye removal from water has been investigated. The post RO-carbon was thermally activated (RO900), and the material thus obtained exhibited high surface area viz. 753 m2/g. In the batch system, the efficient Methylene Blue (MB) and Methyl Orange (MO) removal was obtained by using 0.08 g and 0.13 g/50 mL adsorbent dosage respectively. Moreover, 420 min was the optimized equilibration time for both the dyes. The maximum adsorption capacities of RO900 for MB and MO dyes were 223.29 and 158.14 mg/g, respectively. The comparatively higher MB adsorption was attributed to the electrostatic attraction between adsorbent and MB. The thermodynamic findings revealed the process as spontaneous, endothermic, and accompanied by entropy increment. Additionally, simulated effluent was treated, and >99% dye removal efficiency was achieved. To mimic an industrial perspective, MB adsorption onto RO900 was also carried out in continuous mode. The initial dye concentration and effluent flow rate were among the process parameters that were optimized using the continuous mode of operation. Further, the experimental data of continuous mode was fitted with Clark, Yan, and Yoon-Nelson models. Py-GC/MS investigation revealed that dye-loaded adsorbents could be pyrolyzed to produce valuable chemicals. The cost and low toxicity associated benefits of discarded RO-carbon over other adsorbents reveal the significance of the present study.
Assuntos
Águas Residuárias , Poluentes Químicos da Água , Carbono , Corantes , Adsorção , Cinética , Termodinâmica , Azul de Metileno , Osmose , Concentração de Íons de HidrogênioRESUMO
Waste separation at a household level could facilitate sustainable waste management. However, despite several efforts by the government, the adoption of household waste separation practices is still at a nascent stage. Therefore, we aim to study the factors affecting household waste separation intention (WSI). Drawing on Dual Factor Theory (DFT), two distinct sets of factors (enablers and barriers) were used to explain the WSI at the household level. This study also extended the Self Determination Theory (SDT) and Status Quo Bias (SQB) theory to broadly identify the factors and develop a conceptual model. The main study analyzed data from 494 respondents using a structural equation modeling approach. The result reveals that environmental concern, anticipated guilt, awareness of consequences, and health consciousness have a significant positive effect on WSI. In contrast, perceived inconvenience, information, and infrastructure barriers significantly negatively affect WSI. Additionally, gender and income partially moderated the studied relationships. The results offer key insights and implications for marketers and public policymakers.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Inquéritos e Questionários , Intenção , Modelos Teóricos , Renda , Eliminação de Resíduos/métodos , Resíduos SólidosRESUMO
Increasing demand of pure and accessible water and improper disposal of waste into the existing water resources are the major challenges for sustainable development. Nanoscale technology is an effective approach that is increasingly being applied to water remediation. Compared to conventional water treatment processes, silver nanotechnology has been demonstrated to have advantages due to its anti-microbial and oligodynamic (biocidal) properties. This review is focused on environmentally friendly green syntheses of silver nanoparticles (AgNPs) and their applications for the disinfection and microbial control of wastewater. A bibliometric keyword analysis is conducted to unveil important keywords and topics in the utilisation of AgNPs for water treatment applications. The effectiveness of AgNPs, as both free nanoparticles (NPs) or as supported NPs (nanocomposites), to deal with noxious pollutants like complex dyes, heavy metals as well as emerging pollutants of concern is also discussed. This knowledge dataset will be helpful for researchers to identify and utilise the distinctive features of AgNPs and will hopefully stimulate the development of novel solutions to improve wastewater treatment. This review will also help researchers to prepare effective water management strategies using nano silver-based systems manufactured using green chemistry.
Assuntos
Poluentes Ambientais , Nanopartículas Metálicas , Purificação da Água , Química Verde , Nanopartículas Metálicas/química , Nanotecnologia , PrataRESUMO
Solid acid catalysts occupy a special class in heterogeneous catalysis for their efficiency in eco-friendly conversion of biomass into demanding chemicals. We synthesized porphyrin containing porous organic polymers (PorPOPs) using colloidal silica as a support. Post-modification with chlorosulfonic acid enabled sulfonic acid functionalization, and the resulting material (PorPOPS) showed excellent activity and durability for the conversion of fructose to 5-hydroxymethyl furfural (HMF) in green solvent water. PorPOPS composite was characterized by N2 sorption, FTIR, TGA, CHNS, FESEM, TEM and XPS techniques, justifying the successful synthesis of organic networks and the grafting of sulfonic acid sites (5 wt%). Furthermore, a high surface area (260 m2/g) and the presence of distinct mesopores of ~15 nm were distinctly different from the porphyrin containing sulfonated porous organic polymer (FePOP-1S). Surprisingly the hybrid PorPOPS showed an excellent yield of HMF (85%) and high selectivity (>90%) in water as compared to microporous pristine-FePOP-1S (yield of HMF = 35%). This research demonstrates the requirement of organic modification on silica surfaces to tailor the activity and selectivity of the catalysts. We foresee that this research may inspire further applications of biomass conversion in water in future environmental research.
RESUMO
Visible light-active photocatalysts play a crucial role in gas-phase photocatalytic CO2 reduction, offering significant potential for sustainable energy conversion. Herein, we present the synthesis of spindle-shaped Iron (Fe)-based metal-organic framework (MOF) MIL-88A, coupled with distinct α-Bi2O3 nanospheres. The α-Bi2O3/MIL88A heterostructure is formed by interacting opposite surface charges, enhancing visible-light absorption and efficient interfacial charge-carrier separation. Such low-cost photocatalysts have a 1.75 eV band gap and demonstrate enhanced efficacy in converting CO2 to CO, CH4, and H2 in water without using any sacrificial agents or noble metals compared to pristine MIL88A. In addition, in situ Electron Spin Resonance (ESR) analyses revealed that these unique catalysts combination promoted enhanced interfacial charge dynamics, creating efficient trapping sites for photogenerated carriers. Further, in-situ Diffuse Reflectance Infrared Fourier Transfer Spectroscopy (DRIFTS) investigation elucidates the plausible reaction mechanism and provides an effective methodology for catalyst screening for CO2 photoreduction. This study offers an effective approach for synthesizing the earth-abundant heterostructure from metal oxide and low-cost MOFs, enhancing photocatalytic activity for sustainable carbon dioxide conversion into invaluable chemicals.
RESUMO
Biochar-based materials for air treatment have gained significant attention for removing health-detrimental volatile organic compounds (VOCs) and particulate matter (PM) in indoor air settings. However, high turnaround time, multiple pretreatment processes involved, and high pore size and low surface area (>10 µm, <100 m2 g-1) of lignocellulosic feedstocks demand alternative biochar feedstock material. Considering this, we designed a simple first-of-its-kind indoor air scrubbing material using diatoms-enriched microalgae biochar. In the present study, the microalgae were cultivated on waste anaerobic digestate (biogas slurry) and were pyrolyzed at three different temperatures: 300 °C (BC300), 500 °C (BC500), and 700 °C (BC700). The BC500 and BC700 showed the highest removal efficiencies (99 %) for total volatile organic carbons (TVOCs) and formaldehyde (HCHO) at concentrations of 1.22 mg m-3 HCHO and 8.57 mg m-3 TVOC compared to 50% efficiency obtained with commercially available surgical, cloth, and N95 masks. The biochar obtained showed a high Brunauer-Emmett-Teller (BET) surface area of 238 m2 g-1 (BC500) and 480 m2 g-1 (BC700) and an average pore size of 9-11 nm due to the mesoporous characteristic of diatom frustules. The comparatively poor performance of BC300 was due to lower surface area (150 m2 g-1) arising from incomplete organic removal, as evidenced by FESEM-EDX and FTIR. The high removal efficiencies in BC500 and BC700 were also attributed to the presence of reactive functional groups such as -OH and R-NH2. Concurrently, the average particulate matter (PM10, PM2.5, and PM1) removal efficiency for BC500 and BC 700 ranged between 66 and 82.69 %. The PM removal performance of BC500 and BC700 was lower (15-20%) than commercially available masks. Overall, the present study highlights the importance of diatoms (reactive Si) present inside the pores of microalgal biochar for enhanced removal of PM, TVOCs, and HCHO at temperatures above 500 °C. This complete approach signifies a step towards establishing a self-sustainable and circular process characterized by minimal waste generation for indoor air treatment.
Assuntos
Poluentes Atmosféricos , Poluição do Ar em Ambientes Fechados , Carvão Vegetal , Microalgas , Compostos Orgânicos Voláteis , Material Particulado/análise , Compostos Orgânicos Voláteis/análise , Poluição do Ar em Ambientes Fechados/análise , Formaldeído , Poluentes Atmosféricos/análise , Monitoramento AmbientalRESUMO
The increasing prevalence of paraben compounds in the environment has given rise to concerns regarding their detrimental impacts on both ecosystems and human health. Over the past few decades, photocatalytic reactions have drawn significant attention as a method to accelerate the otherwise slow degradation of these pollutants. The current study aims to evaluate the current efficacy of the photocatalytic method for degrading parabens in aqueous solutions. An extensive literature review and bibliometric analysis were conducted to identify key research trends and influential areas in the field of photocatalytic paraben degradation. Studies were screened based on the predetermined inclusion and exclusion criteria, which led to 13 studies that were identified as being appropriate for the meta-analysis using the random effects model. Furthermore, experimental parameters such as pH, paraben initial concentration, catalyst dosage, light intensity, and contact time have been reported to have key impacts on the performance of the photocatalytic degradation process. A comprehensive quantitative assessment of these parameters was carried out in this work. Overall, photocatalytic techniques could eliminate parabens with an average degradation efficiency of >80 %. The findings of the Egger's test and the Begg's test were statistically not significant suggesting potential publication bias was not observed. This review provides a holistic understanding of the photocatalytic degradation of parabens and is anticipated to encourage more widespread adoption of photocatalytic procedures as a suitable method for the elimination of parabens from aqueous solutions, opening new avenues for future research in this direction.
Assuntos
Poluentes Ambientais , Recuperação e Remediação Ambiental , Humanos , Parabenos/metabolismo , Ecossistema , LuzRESUMO
Rania-Khan Chandpur site, (Kanpur Dehat, Uttar Pradesh, India), one of the highly Chromium (Cr) contaminated sites in India due to Chromite Ore Processing Residue (COPR), has been investigated at the field-scale. We found that the area around the COPR dumps was hazardously contaminated with the Cr where its concentrations in the surface water and groundwater were > 40 mgL-1, its maximum contents in the COPRs and in the soils of the adjoining lands were 9.6 wt% and 3.83 wt%, respectively. By exploring the vegetation and microbial distribution across the site, we advocate the appropriateness of Cynodon dactylon, Chrysopogon zizanioides, Cyperus sp., and Typha angustifolia as the most suitable phytoremediation agent because their association with Cr remediating bacterial species (Pseudomonas sp., Clostridium sp. and Bacillus sp.) was strong. Using this remarkable information for the bioremediation projects, this site can be re-vegetated and bioaugmented to remediate Cr in soils, waterlogged ditches, surface water, and in groundwater systems.
Assuntos
Cromo , Microbiota , Índia , Solo , ÁguaRESUMO
Polyethylene terephthalate (PET) is a non-degradable single-use plastic and a major component of plastic waste in landfills. Chemical recycling is one of the most widely adopted methods to transform post-consumer PET into PET's building block chemicals. Non-catalytic depolymerization of PET is very slow and requires high temperatures and/or pressures. Recent advancements in the field of material science and catalysis have delivered several innovative strategies to promote PET depolymerization under mild reaction conditions. Particularly, heterogeneous catalysts assisted depolymerization of post-consumer PET to monomers and other value-added chemicals is the most industrially compatible method. This review includes current progresses on the heterogeneously catalyzed chemical recycling of PET. It describes four key pathways for PET depolymerization including, glycolysis, pyrolysis, alcoholysis, and reductive depolymerization. The catalyst function, active sites and structure-activity correlations are briefly outlined in each section. An outlook for future development is also presented.
RESUMO
Sugarcane bagasse (SCB) is a significant agricultural residue generated by sugar mills based on sugarcane crop. Valorizing carbohydrate-rich SCB provides an opportunity to improve the profitability of sugar mills with simultaneous production of value-added chemicals, such as 2,3-butanediol (BDO). BDO is a prospective platform chemical with multitude of applications and huge derivative potential. This work presents the techno-economic and profitability analysis for fermentative production of BDO utilizing 96 MT of SCB per day. The study considers plant operation in five scenarios representing the biorefinery annexed to a sugar mill, centralized and decentralized units, and conversion of only xylose or total carbohydrates of SCB. Based on the analysis, the net unit production cost of BDO in the different scenarios ranged from 1.13 to 2.28 US$/kg, while the minimum selling price varied from 1.86 to 3.99 US$/kg. Use of the hemicellulose fraction alone was shown to result in an economically viable plant; however, this was dependent on the condition that the plant would be annexed to a sugar mill which could supply utilities and the feedstock free of cost. A standalone facility where the feedstock and utilities were procured was predicted to be economically feasible with a net present value of about 72 million US$, when both hemicellulose and cellulose fractions of SCB were utilized for BDO production. Sensitivity analysis was also conducted to highlight some key parameters affecting plant economics.
RESUMO
Globally, industrialisation and urbanisation have led to the generation of hazardous waste (HW). Sustainable hazardous waste management (HWM) is the need of the hour for a safe, clean, and eco-friendly environment and public health. The prominent waste management strategies should be aligned with circular economic models considering the economy, environment, and efficiency. This review critically discusses HW generation and sustainable management with the strategies of prevention, reduction, recycling, waste-to-energy, advanced treatment technology, and proper disposal. In this regard, the major HW policies, legislations, and international conventions related to HWM are summarised. The global generation and composition of hazardous industrial, household, and e-waste are analysed, along with their environmental and health impacts. The paper critically discusses recently adapted management strategies, waste-to-energy conversion techniques, treatment technologies, and their suitability, advantages, and limitations. A roadmap for future research focused on the components of the circular economy model is proposed, and the waste management challenges are discussed. This review stems to give a holistic and broader picture of global waste generation (from many sources), its effects on public health and the environment, and the need for a sustainable HWM approach towards the circular economy. The in-depth analysis presented in this work will help build cost-effective and eco-sustainable HWM projects.
Assuntos
Gerenciamento de Resíduos , Gerenciamento de Resíduos/métodos , Resíduos Perigosos , Saúde Pública , Políticas , Gestão da Segurança , Reciclagem , Resíduos SólidosRESUMO
Organic contaminants in water are a growing environmental threat to sustainable development, with detrimental effects on the biosphere. In recent years, researchers have increasingly focused their attention on the area of bioremediation as an important tool to eliminate harmful pollutants from the environment. This review examines the application of bioremediation technologies to the removal of organic pollutants, with an emphasis on hydrocarbons and textile dyes. It applies a descriptive bibliometric analysis to study statistical practicality-vs-applicability of bioremediation of emerging organic pollutants. The paper identifies efficient pathways for bioremediation of different types of organic pollutants and outlines the potential for an eco-friendly and economical approach for the biological remediation of micropollutants by microalgae. Facts and figures on various hazardous pollutants, constraints in their current removal from water at an industrial level, and promising future solutions are carefully presented here.
Assuntos
Poluentes Ambientais , Microalgas , Biodegradação Ambiental , Hidrocarbonetos , Águas ResiduáriasRESUMO
Sustainable and economical wastewater treatment forms a vital step towards long-term sustainability of petrochemical refineries and industries. An affordable solution to this challenge is to employ biowaste as the key consumable active component. This paper describes the synthesis and characterization of activated biochar derived from cow-dung, a readily available raw material in low-resource settings, and its application for adsorption of phenol, one of the major pollutants in industrial wastewater. Adsorption parameters are optimized by using response surface methodology. Phenol adsorption equilibrium and kinetics data are well fitted to Freundlich isotherm (R2 = 0.97) and pseudo-second-order model (R2 = 0.99), respectively. The maximal adsorption capacity (518.89 mg/g) was attained using the Langmuir isotherm model at pH 6.0. Negative values of thermodynamic parameters confirmed the spontaneity, feasibility, and exothermic behaviour of adsorption reaction. The results demonstrate that synthesized activated biochar showed an excellent phenol adsorption capacity of 98.8 %.
Assuntos
Fenol , Poluentes Químicos da Água , Adsorção , Animais , Bovinos , Carvão Vegetal/química , Feminino , Concentração de Íons de Hidrogênio , Cinética , Fenol/química , Fenóis/análise , Termodinâmica , Poluentes Químicos da Água/análiseRESUMO
Biomass pyrolysis has recently gained increasing attention as a thermochemical conversion process for obtaining value-added products, thanks to the development of cutting-edge, innovative and cost-effective pyrolysis processes. Over time, new and novel pyrolysis techniques have emerged, and these processes can be tuned to maximize the production of high-quality hydrogen. This review examines recent advancements in biomass pyrolysis by classifying them into conventional, advanced and emerging approaches. A comprehensive overview on the recent advancements in biomass pyrolysis, highlighting the current status for industrial applications is presented. Further, the impact of each technique under different approaches on conversion of biomass for hydrogen production is evaluated. Techniques, such as inline catalytic pyrolysis, microwave pyrolysis, etc., can be employed for the sustainable production of hydrogen. Finally, the techno-economic analysis is presented to understand the viability of pyrolysis at large scale. The outlook highlights discernments into future directions, aimed to overcome the current shortcomings.
RESUMO
Sugarcane bagasse, a fundamental by-product of the sugar industry, was utilised to improve its digestibility for bioenergy applications. Choline chloride based deep eutectic solvents (DESs) were used for pretreatment of five different varieties of sugarcane bagasse (SRA1, SRA5, Q208, MA239, ISB) and a comparative study of compositional and morphological changes was performed. Three eutectic mixtures - choline chloride: malonic acid (1:1), choline chloride: glycerol (1:2) and choline chloride: lactic acid (1:5) were used to selectively remove lignin and improve saccharification efficiency. Physico-chemical characterizations performed using FE-SEM, FTIR, TGA and XRD analysis consistently indicated disruption of bagasse structure after DES pretreatment. Glucose recovery was predominantly influenced by the glucose content, as SRA1 variety showed the highest recovery of 92.8% for choline chloride: glycerol DES pretreatment. Choline chloride: lactic acid DES pretreatment demonstrated the most efficient lignin removal of 81.6% for ISB variety and the enzyme amenability was prominently increased to 98.5%.
Assuntos
Saccharum , Celulose , Hidrólise , Lignina , SolventesRESUMO
Water remediation is an essential component for sustainable development. Increasing population and rapid industrialization have contributed to the deterioration of water resources. In particular, effluents from chemical, pharmaceutical, petroleum industries, and anthropogenic activities have led to severe ecological degradation. Many of these detrimental pollutants are highly toxic even at low concentrations, acting as carcinogens and inflicting severe long-lasting effects on human health. This review underscores the potential applications of engineered carbon-based materials for effective wastewater treatment. It focuses on the performance as well as efficiency of activated carbon, graphene nanomaterial, and carbon nanotubes, both with and without chemical functionalization. Plausible mechanisms of action between the chemically functionalized adsorbent and pollutants are also discussed. Based on the keywords from the literature published in the recent five years, a statistical practicality-vs-applicability analysis of these three materials is also provided. The review will provide a deep understanding of the physical or chemical interactions of the wastewater pollutants with carbon materials.
Assuntos
Grafite , Nanotubos de Carbono , Poluentes Químicos da Água , Purificação da Água , Adsorção , Humanos , Águas Residuárias , Água , Poluentes Químicos da Água/análiseRESUMO
The substantial growth of electronic waste (e-waste) in recent years has become a serious threat to environment. However, there is an excellent opportunity to recover and reuse metals present in e-waste, which eventually leads to conservation of natural resources for future generation. A greener and sustainable approach for the recovery of metals from electronic waste is the need of the hour. In this study, thermal decomposition of printed circuit boards (PCBs) was carried out in presence of nitrogen for conversion of polymers into oil and combustible gases. The metal rich pyrolysis residue was roasted in presence of ammonia chloride as chlorinating agent to recover metals. The effect of roasting parameters on the metal recovery investigated in temperature range of 200⯰C to 325⯰C for 1â¯h to 5â¯h while the NH4Cl dosage varied from 1â¯g/g to 4â¯g/g. Under the optimized roasting conditions, around 93% Cu, 100% Ni, 100% Zn, and 100% Pb were recovered at temperature of 300⯰C, time of 4â¯h and NH4Cl dose of 3â¯g/g. The present process provides an eco-friendly solution for the recovery of metals from e-waste, which are valuable and avoid pollution.
RESUMO
Microalgae are recognized as a potential source of biomass for obtaining bioenergy. However, the lack of studies towards economic viability and environmental sustainability of the entire production chain limits its large-scale application. The use of wastewaters economizes natural resources used for algal biomass cultivation. However, desirable biomass characteristics for a good fuel may be impaired when wastewaters are used, namely low lipid content and high ash and protein contents. Thus, the choice of wastewaters with more favorable characteristics may be one way of obtaining a more balanced macromolecular composition of the algal biomass and therefore, a more suitable feedstock for the desired energetic route. The exploration of biorefinery concept and the use of wastewaters as culture medium are considered as the main strategic tools in the search of this viability. Considering the economics of overall process, direct utilization of wet biomass using hydrothermal liquefaction or hydrothermal carbonization and anaerobic digestion is recommended. Among the explored routes, anaerobic digestion is the most studied process. However, some main challenges remain as little explored, such as a low energy pretreatment and suitable and large-scale reactors for algal biomass digestion. On the other hand, thermochemical conversion routes offer better valorization of the algal biomass but have higher costs. A biorefinery combining anaerobic digestion, hydrothermal carbonization and hydrothermal liquefaction processes would provide the maximum possible output from the biomass depending on its characteristics. Therefore, the choice must be made in an integrated way, aiming at optimizing the quality of the final product to be obtained. Life cycle assessment studies are critical for scaling up of any algal biomass valorization technique for sustainability. Although there are limitations, suitable integrations of these processes would enable to make an economically feasible process which require further study.