Particleboards with Recycled Material from Hemp-Based Panels.

This research addresses the current need for sustainable solutions in the construction and furniture industries, with a focus on environmentally friendly particleboard. Particleboards were made from a mixture of virgin wood chips and hemp shives, which were then mechanically recycled and used to make new lightweight particleboards. Phenol-formaldehyde resin with 25% w/w phenol replacement by soybean flour (PFS) was used as the binder for the lignocellulosic materials. Laboratory analyses determined the resin properties, and FTIR confirmed the structure of the experimental PFS resin. The thermal properties of all the resins were evaluated using thermogravimetric analysis (TGA). The panels were manufactured using industrial simulation and tested for mechanical and physical properties in accordance with European standards. The FTIR study confirmed good adhesion, and the TGA showed improved thermal stability for the recycled biomass panels compared to virgin biomass panels. The study concludes that lightweight particleboards can be successfully produced from recycled hemp shive-based panels, providing a sustainable alternative to traditional materials in the construction industry.

Eco-Friendly Adhesives Based on the Oligomeric Condensed Tannins-Rich Extract from Alder Bark for Particleboard and Plywood Production.

Toxic formaldehyde emissions, and the necessity to reduce the consumption of petrochemicals, stimulates the development of environmentally friendly adhesives. The aim of this research was to study, for the first time, the possibility of using condensed tannins (CTs)-rich extracts from grey alder (Alnus incana) and black alder (Alnus glutinosa) bark in the production of particleboards and plywood adhesives. The chemical structure, composition, and molecular weight of the CTs were identified by a 13C-NMR and TOF-MS analysis. Three innovative adhesive systems were studied: CTs-phenol-formaldehyde (CTs-PF) resin; a CTs-polyethyleneimine (PEI) adhesive system; and CTs-PEI combined with an ultra-low emitting formaldehyde resin (ULEFR)-CTs-PEI-ULEFR. The results showed that CTs-PF resin has properties close to commercial PF resin, and the formaldehyde emission was twice lower. CTs-PEI bonded particleboards corresponded to the requirements of the EN 312:2010 standard for particleboards in dry conditions (Type P2). CTs-PEI-ULEFR, with a 40-60% substitution of ULEFR by CTs-PEI, had adhesive properties very close to ULEFR; the plywood shear strength fit the requirements of the EN 314-2:1993 standard for application in internal and external system conditions. The introduction of extracted alder bark residues microparticles into the composition of the adhesive system showed their positive potential for application as a filler.

Evaluation of myocardial performance index to predict mild rejection in cardiac transplantation.

BACKGROUND: Early diagnosis of heart transplant rejection is mandatory, since even mild rejection can rapidly progress to more severe rejection. Noninvasive diagnosis of heart transplant rejection still remains a challenge. HYPOTHESIS: The purpose of the study was to determine a possible association between myocardial performance index (MPI) and biopsy score of the heart transplant. METHODS: This is a retrospective cohort analysis of 99 complete Doppler echocardiographic studies from 24 consecutive patients (23 men) performed within 24 h of endomyocardial biopsy. Mean age of the cohort was 50 +/- 9 years and mean time from transplantation was 19 +/- 21 months (1-81). All patients were in sinus rhythm. Myocardial performance index was calculated as the ratio of isovolumic contraction time plus isovolumic relaxation time divided by ejection time. Left ventricular dimensions, left ventricular mass, ejection fraction, and a number of Doppler indices (E-point velocity, A-point velocity, deceleration time, and deceleration slope) were also measured. The International Society for Heart and Lung Transplantation (ISHLT) grading system was used for the classification of endomyocardial biopsies. RESULTS: Myocardial performance index was significantly prolonged (0.60 +/- 0.13, 0.68 +/- 0.08, 0.75 +/- 0.20, in biopsy scores 0, IA, and IB, respectively; p<0.001). Isovolumic contraction time was significantly prolonged; isovolumic relaxation time was not significantly changed. Ejection time and deceleration time were significantly shortened. Multivariate stepwise regression analysis revealed that MPI and deceleration time were the only independent predictors of biopsy score (r=0.48, F=10.53, p<0.0001). CONCLUSION: Myocardial performance index seems to be a useful adjunct in the follow-up of cardiac transplant patients. These preliminary data suggest that a larger study may be indicated to clarify the relevance of myocardial performance index.

Value of apical circumferential strain in the early post-myocardial infarction period for prediction of left ventricular remodeling.

BACKGROUND: Left ventricular (LV) remodeling after acute myocardial infarction (AMI) is related to increased morbidity and mortality. The aim of the present study was to examine whether LV deformational and torsional parameters can predict LV remodeling in patients with AMI. METHODS: Forty-two patients (age 57 ± 14 years) presenting with an anterior ST-elevation AMI and treated with primary percutaneous transluminal coronary angioplasty (PTCA) were included in the study. Four days post MI, LV ejection fraction (EF), LV torsion, longitudinal (4-, 3- & 2-chamber) and circumferential strain of the LV apex were evaluated by conventional and speckle-tracking echocardiography. The echocardiographic study was repeated at 3 months post-AMI and patients with LV remodeling, i.e. an increase >15% in LV end-systolic volume (LVESV), were identified. RESULTS: The 13 patients with LV remodeling had significantly more impaired apical circumferential strain (-7.3 ± 2.2% vs. -18.9 ± 5.2%, p=0.001), EF (42 ± 7% vs. 48.9 ± 6%, p=0.005), LV apical rotation (6.8 ± 4.8° vs. 11.1 ± 4.0°, p=0.027), and LV global longitudinal strain (-9.7 ± 1.9% vs. -12.9 ± 2.9%, p=0.03) on the 4th day post-AMI, in comparison to those without LV remodeling. Apical circumferential strain on the 4th day post-AMI showed the strongest correlation with the LVESV 3 months post-AMI (r=0.76, p=0.001), compared to EF (r=-0.60, p=0.001), global longitudinal strain (r=0.56, p=0.001), and LV apical rotation (r=-0.53, p=0.001). Furthermore, apical circumferential strain demonstrated the highest diagnostic accuracy: area under the receiver operating characteristic (ROC) curve 0.98, with sensitivity 100% and specificity 96% for prediction of LV remodeling, using a cutoff value <-11.0%. CONCLUSION: In patients with anterior AMI, LV apical circumferential strain in the early post-MI period constitutes a significant prognostic factor for LV remodeling at 3 months. Assessment of this parameter may identify patients at high risk for heart failure development.

The association of coronary flow changes and inflammatory indices to ischaemia-reperfusion microvascular damage and left ventricular remodelling.

BACKGROUND: The aim of this study was to investigate the effect of coronary flow (CF) changes and inflammatory indices on myocardial microcirculation--assessed by myocardial contrast echocardiography (MCE)--and on left ventricular remodelling, in an experimental ischaemia-reperfusion model. METHODS: In 15 pigs, weighing 30 +/- 5 kg, ligation of the left anterior descending (LAD) coronary artery was performed, followed by reperfusion for 120 min. Peak, mean, duration and volume of systolic and diastolic components of CF distal to the LAD ligation were measured using a butterfly flowmeter and their ratio was calculated. The following two-dimensional echocardiography indices of LV geometry/function were measured from the apical four-chamber view: LV end-systolic (ESD) and end-diastolic (EDD) dimension long- (Ls, Ld) and short-axis (Ss, Sd) and their ratio (Ld/Sd, Ls/Ss, defined as the sphericity index). Interleukin (IL) 1beta, 6, 10 and tumour necrosis factor (TNF) were measured in samples obtained from the LV cavity and coronary sinus. A 0.5 ml/min injection slow bolus over 30 s of SonoVue was made into the left ventricle (LV) in order to assess myocardial perfusion by MCE. Standard apical four-chamber views were digitally acquired and stored for off-line analysis using the Echofit system. The peak intensity (Ac) of the microbubbles at the apex, distally to ligation, was normalised with respect to the peak intensity of the microbubbles in the LV cavity. All parameters were recorded at baseline, immediately after ligation and at 5, 15, 30, 60, 120 min during reperfusion. The percentage changes of CF indices, echocardiographic parameters, interleukins and Ac between baseline and reperfusion were calculated. RESULTS: Mean systolic CF, systolic volume, peak and mean diastolic flow (MDF) changes and epicardial mean CF, Ld/Sd, Ls/Ss changes and coronary sinus IL-6 (IL-6 cs) were inversely correlated with Ac changes during reperfusion. At 5 and 15 min of reperfusion (hyperaemic phase), the greatest median increase of mean diastolic (172% and 86%), and mean systolic CF (713% and 344%) and the greatest reduction of Ac (-41% at 5 min) compared to baseline (P < 0.05) were observed. The maximum increase of IL-6 cs (40%) was detected at 120 min. ROC analysis showed that of all examined echocardiography indices an increase of mean diastolic CF > 22% was the best predictor of a >25% reduction of Ac with 76% sensitivity and 65% specificity (area 71%, CI 54%-85%, P = 0.02). In addition an >32% increase of IL-6 at 120 min of reperfusion predicted a >25% reduction of Ac with a 76% sensitivity and 65% specificity (area 71% CI 61%-97%, P = 0.01). CONCLUSION: Changes of mean diastolic CF and IL-6 cs are associated with alterations in myocardial microvascular integrity after ischaemia-reperfusion and may be used as a predictor of myocardial dysfunction.

Preservation of coronary sinus flow after complete ligation of all coronary arteries.

INTRODUCTION: The contribution of the collateral network to myocardial oxygenation under normal circumstances is not clear. However, it is possible that in diseased myocardium this network may be activated and contributes significantly to cardiac blood supply. The purpose of this study was to examine the coronary sinus flow after acute, synchronous, complete occlusion of all epicardial coronary arteries and to investigate methods to increase the flow in the setting of ischaemia. METHODS: In 8 pigs, the coronary sinus flow was measured after complete ligation of all coronary arteries. In two of the 8 experiments adrenaline and dobutamine were infused into the left ventricular cavity, while clamping of the ascending aorta was performed in another three animals in an effort to increase left ventricular systolic pressure. RESULTS: The mean coronary sinus flow decreased from 36.06 +/- 11.01 ml/min to 5.61 +/- 6.96 ml/min (p < 0.001) after ligation of the coronary arteries. A 67% mean reduction of coronary sinus flow at the first minute after ligation was observed and a progressive decrease of coronary sinus outflow to almost zero within 60 minutes was seen in some experiments. Neither infusion of adrenaline and dobutamine nor ascending aorta clamping increased the coronary sinus flow. CONCLUSIONS: The preservation of coronary sinus flow after the complete occlusion of all coronary arteries indicates that retrograde flow through the collateral network from cardiac chambers may exist. Methods that increase the blood flow through the collateral network may contribute to the improvement of myocardial perfusion in severe coronary insufficiency.