Tunable CHA/AEI Zeolite Intergrowths with A Priori Biselective Organic Structure-Directing Agents: Controlling Enrichment and Implications for Selective Catalytic Reduction of NOx.

A novel ab initio methodology based on high-throughput simulations has permitted designing unique biselective organic structure-directing agents (OSDAs) that allow the efficient synthesis of CHA/AEI zeolite intergrowth materials with controlled phase compositions. Distinctive local crystallographic ordering of the CHA/AEI intergrowths was revealed at the nanoscale level using integrated differential phase contrast scanning transmission electron microscopy (iDPC STEM). These novel CHA/AEI materials have been tested for the selective catalytic reduction (SCR) of NOx, presenting an outstanding catalytic performance and hydrothermal stability, even surpassing the performance of the well-established commercial CHA-type catalyst. This methodology opens the possibility for synthetizing new zeolite intergrowths with more complex structures and unique catalytic properties.

Design and Synthesis of the Active Site Environment in Zeolite Catalysts for Selectively Manipulating Mechanistic Pathways.

By combining kinetics and theoretical calculations, we show here the benefits of going beyond the concept of static localized and defined active sites on solid catalysts, into a system that globally and dynamically considers the active site located in an environment that involves a scaffold structure particularly suited for a target reaction. We demonstrate that such a system is able to direct the reaction through a preferred mechanism when two of them are competing. This is illustrated here for an industrially relevant reaction, the diethylbenzene-benzene transalkylation. The zeolite catalyst (ITQ-27) optimizes location, density, and environment of acid sites to drive the reaction through the preselected and preferred diaryl-mediated mechanism, instead of the alkyl transfer pathway. This is achieved by minimizing the activation energy of the selected pathway through weak interactions, much in the way that it occurs in enzymatic catalysts. We show that ITQ-27 outperforms previously reported zeolites for the DEB-Bz transalkylation and, more specifically, industrially relevant zeolites such as faujasite, beta, and mordenite.

Making Nanosized CHA Zeolites with Controlled Al Distribution for Optimizing Methanol-to-Olefin Performance.

From theoretical calculations and a rational synthesis methodology, it has been possible to prepare nanocrystalline (60-80 nm) chabazite with an optimized framework Al distribution that has a positive impact on its catalytic properties. This is exemplified for the methanol-to-olefin (MTO) process. The nanosized material with the predicted Al distribution maximizes the formation of the required MTO hydrocarbon pool intermediates, while better precluding excessive diffusion pathways that favor the rapid catalyst deactivation by coke formation.

Synthesis of highly stable metal-containing extra-large-pore molecular sieves.

The isomorphic substitution of two different metals (Mg and Co) within the framework of the ITQ-51 zeotype (IFO structure) using bulky aromatic proton sponges as organic structure-directing agents (OSDAs) has allowed the synthesis of different stable metal-containing extra-large-pore zeotypes with high pore accessibility and acidity. These metal-containing extra-large-pore zeolites, named MgITQ-51 and CoITQ-51, have been characterized by different techniques, such as powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectrometry, UV-Vis spectroscopy, temperature programmed desorption of ammonia and Fourier transform infrared spectroscopy, to study their physico-chemical properties. The characterization confirms the preferential insertion of Mg and Co atoms within the crystalline structure of the ITQ-51 zeotype, providing high Brønsted acidity, and allowing their use as efficient heterogeneous acid catalysts in industrially relevant reactions involving bulky organic molecules.

Photochemical reactions of halogenated aromatic 1,3-diketones in solution studied by steady state, one- and two-color laser flash photolyses.

Photochemical processes of 4-tert-butyl-4'-methoxydibenzoylmethane (Avobenzone, AB), 4-phenylbenzoylbenzoyl-, 4-phenylbenzoyl-2'-furanyl- and 4-phenylbenzoyl-2'-thenoylmethanes (PB@Ph, PB@F and PB@T, respectively) substituted with Br and Cl at the C2 position were studied by stationary and laser flash photolyses in solution. The absorption spectral features showed that the molecular structures of the halogenated diketones are in the keto forms while those of halogen-free diketones are in the enol forms. The excited singlet and triplet state energies were determined from the absorption and emission spectra. From the absorption spectral changes upon steady state photolysis of brominated diketones in ethanol, the corresponding halogen-free diketones were formed due to Br elimination being the major photochemical process. The determined quantum yields for the formation of the halogen-free diketones were independent of the amount of dissolved oxygen, indicating that the elimination process is an event in the excited singlet (S1) states. In contrast, from the observed absorption spectra obtained upon photolysis of chlorinated AB and PB@Ph, it was inferred that Norrish type I is the major photochemical reaction in the S1 states in acetonitrile. Chlorinated PB@F and PB@T were found to undergo Cl elimination in the S1 states in cyclohexane to form the corresponding halogen-free diketones. Laser photolysis studies of brominated AB in acetonitrile and ethanol provided a transient absorption spectrum ascribable to the Avobenzone radical (ABR) produced by debromination as the initial intermediate, followed by the AB formation in ethanol. The quenching rate constant of ABR by ethanol and the quantum yield of the AB formation via ABR were determined. These observations provided evidence that H-atom abstraction of ABR from ethanol is responsible for the AB formation. Conversely, laser flash photolysis of brominated and chlorinated PB@Ph, PB@F and PB@T demonstrated the formation of the triplet-triplet absorption spectra. No chemical reactions were found to occur in the triplet (T1) states. Two-color two-laser photolysis studies were carried out on the T1 state of chlorinated PB@Ph, PB@F and PB@T, resulting in the formation of the corresponding halogen-free diketones. These observations confirmed the occurrence of Cl elimination in the highly excited triplet (Tn, n≥ 2) states. Based on the computed bond dissociation energies for the C-halogen and C-C bonds, switching mechanisms of dehalogenation and α-cleavage were discussed.

Photochemical and photophysical properties of dibenzoylmethane derivatives within protein.

In the present work, three dibenzoylmethane derivatives in their ß-diketo form have been selected to investigate their photophysical and photochemical behavior upon interaction with human serum albumin (HSA). In organic solvents, absorption and phosphorescence emission spectra of the α-bromo derivative of avobenzone (BrAB) were similar to those of the α-methylated and α-propyl analogs (MeAB and PrAB). However, laser flash photolysis experiments revealed a different transient species centered at 350 nm, assigned to the radical obtained from a singlet excited state dehalogenation process. Interestingly, the transient absorption spectrum of BrAB within HSA showed the typical features of the ß-diketone triplet excited state. In the case of MeAB and PrAB derivatives, binding to HSA was associated with a significant increase of their triplet lifetimes as compared to acetonitrile. Finally, the Norrish type II process has been considered as a model to evaluate the influence of the protein microenvironment on the photoreactivity. In this context, photodegradation of PrAB in aerated solutions, to give avobenzone (AB), has been monitored by UV spectroscopy. Interestingly, the quantum yields of AB formation were markedly dependent on the reaction medium (1.4 × 10(-2) in acetonitrile and 3.9 × 10(-2) within albumin medium); by contrast, chemical yields of ca. 50% were obtained in both cases.

Discovering Relationships between OSDAs and Zeolites through Data Mining and Generative Neural Networks.

Organic structure directing agents (OSDAs) play a crucial role in the synthesis of micro- and mesoporous materials especially in the case of zeolites. Despite the wide use of OSDAs, their interaction with zeolite frameworks is poorly understood, with researchers relying on synthesis heuristics or computationally expensive techniques to predict whether an organic molecule can act as an OSDA for a certain zeolite. In this paper, we undertake a data-driven approach to unearth generalized OSDA-zeolite relationships using a comprehensive database comprising of 5,663 synthesis routes for porous materials. To generate this comprehensive database, we use natural language processing and text mining techniques to extract OSDAs, zeolite phases, and gel chemistry from the scientific literature published between 1966 and 2020. Through structural featurization of the OSDAs using weighted holistic invariant molecular (WHIM) descriptors, we relate OSDAs described in the literature to different types of cage-based, small-pore zeolites. Lastly, we adapt a generative neural network capable of suggesting new molecules as potential OSDAs for a given zeolite structure and gel chemistry. We apply this model to CHA and SFW zeolites generating several alternative OSDA candidates to those currently used in practice. These molecules are further vetted with molecular mechanics simulations to show the model generates physically meaningful predictions. Our model can automatically explore the OSDA space, reducing the amount of simulation or experimentation needed to find new OSDA candidates.

A priori control of zeolite phase competition and intergrowth with high-throughput simulations.

Zeolites are versatile catalysts and molecular sieves with large topological diversity, but managing phase competition in zeolite synthesis is an empirical, labor-intensive task. In this work, we controlled phase selectivity in templated zeolite synthesis from first principles by combining high-throughput atomistic simulations, literature mining, human-computer interaction, synthesis, and characterization. Proposed binding metrics distilled from more than 586,000 zeolite-molecule simulations reproduced the extracted literature and rationalized framework competition in the design of organic structure-directing agents. Energetic, geometric, and electrostatic descriptors of template molecules were found to regulate synthetic accessibility windows and aluminum distributions in pure-phase zeolites. Furthermore, these parameters allowed us to realize an intergrowth zeolite through a single bi-selective template. The computation-first approach enables control of both zeolite synthesis and structure composition using a priori theoretical descriptors.

Selective active site placement in Lewis acid zeolites and implications for catalysis of oxygenated compounds.

The selective incorporation of isolated framework Lewis acid sites at specific crystallographic positions in high-silica zeolites was achieved by applying a rationalized post-synthetic grafting methodology. The removal of framework Ge atoms from a Ge-BEC zeolite with low concentrations of Ge in the framework (Si/Ge ∼ 150) followed by grafting allows the synthesis of Sn-BEC zeolites with Sn atoms positionally biased into the double-4-ring (D4R) crystallographic positions of the BEC framework. Spectroscopic characterization using solid-state nuclear magnetic resonance (NMR) coupled with theoretical calculations revealed that Sn atoms preferentially form open Sn sites in the D4R of Sn-BEC. This observation was supported by IR spectra of adsorbed deuterated acetonitrile (CD3CN), a known titrant of Sn sites in zeolites. The catalytic implications of selective incorporation of open Sn sites in Sn-BEC were probed using the Meerwein-Ponndorf-Verley-Oppenauer (MPVO) reaction. Although the MPVO turnover rates normalized by the total number of open Sn sites were comparable on Sn-BEC and a conventional Sn-Beta catalyst synthesized in fluoride media (Sn-Beta(F)), Sn-BEC demonstrated higher per gram reaction rates because of its larger fraction of open sites compared to Sn-Beta(F). These results highlight the advantage of placing active sites in targeted locations within a zeolite structure. The methodology presented here to selectively place catalytic active sites via sacrificial heteroatoms, such as Ge, can be generalized for the design of many other tetrahedrally-coordinated metal-containing zeolites.

A blocked diketo form of avobenzone: photostability, photosensitizing properties and triplet quenching by a triazine-derived UVB-filter.

Novel sunscreens are required providing active protection in the UVA and UVB regions. On the other hand, there is an increasing concern about the photosafety of UV filters, as some of them are not sufficiently photostable. Avobenzone is one of the most frequently employed sunscreen ingredients, but it has been reported to partially decompose after irradiation. In the present work, photophysical and photochemical studies on a methylated avobenzone-derivative have shown that the diketo form is responsible for photodegradation. A transient absorption was observed at 380 nm after laser flash photolysis excitation at 308 nm. It was assigned to the triplet excited state of the diketo form, as inferred from quenching by oxygen and beta-carotene. This transient also interacted with key building blocks of biomolecules by triplet-triplet energy transfer (in the case of thymidine) or electron transfer processes (for 2'-deoxyguanosine, tryptophan and tyrosine). Irradiation of the avobenzone derivative in the presence of a triazine UV-B filter (E-35852) diminished the undesirable effects of the compound by an efficient quenching of the triplet excited state. Thus, sunscreen formulations including triplet quenchers could provide effective protection from the potential phototoxic and photoallergic effects derived from poor photostability of avobenzone.

Photolabile N-hydroxypyrid-2(1H)-one derivatives of guanine nucleosides: a new method for independent guanine radical generation.

One-electron oxidized guanine is an important reactive intermediate in the formation of oxidatively generated damage in DNA and a variety of methods have been utilized for the abstraction of a single electron from the guanine moiety. In this study, an alternative approach for the site specific, independent generation of the guanine radical, utilizing N-hydroxypyrid-2(1H)-one as a photolabile modifier of guanine, is proposed. Novel photolabile 6-[(1-oxido-2-pyridinyl)oxo]-6-deoxy- and 2',6-dideoxy-guanosine derivatives capable of generating the neutral guanine radical (G(-H)*) upon photolysis were synthesized and characterized. The generation of G(-H)* proceeds through homolysis of the N-O bond and was confirmed through continuous photolysis product analysis and trapping studies, as well as laser flash photolysis experiments.

Conceptual similarities between zeolites and artificial enzymes.

By using a Diels-Alder (DA) reaction as a base case, we show that a pure silica zeolite acting as an entropy-trapping scaffold can be synthesized with an organic structure directing agent (OSDA) analogue of the transition state (TS) of the DA reaction. A cavity stabilization of the TS is observed with the corresponding decrease in the activation energy of the reaction. A lower enthalpy of activation and a larger decrease in entropy are obtained with the zeolite synthesized with the analogue of the DA TS when compared with other zeolitic structures. Those differences are maintained, while catalytic activity is increased, when active sites are introduced in the zeolite. The catalytic zeolitic system synthesized with the OSDA analogue of the TS shows conceptual similarities with "de novo design" of an artificial enzyme to perform DA reactions, in where a suitable scaffold of existing proteins is chosen, and computationally designed active sites able to catalyze the cycloaddition reaction are introduced.

Nanosized MCM-22 zeolite using simple non-surfactant organic growth modifiers: synthesis and catalytic applications.

Non surfactant cyclic alkylammonium can selectively decrease the rate of crystal growth along the x-y crystal axes during the synthesis of MWW zeolite. This results in an ∼60 nm nanocrystalline zeolite that shows remarkable catalytic properties for the production of cumene.

"Ab initio" synthesis of zeolites for preestablished catalytic reactions.

Unlike homogeneous catalysts that are often designed for particular reactions, zeolites are heterogeneous catalysts that are explored and optimized in a heuristic fashion. We present a methodology for synthesizing active and selective zeolites by using organic structure-directing agents that mimic the transition state (TS) of preestablished reactions to be catalyzed. In these zeolites, the pores and cavities could be generated approaching a molecular-recognition pattern. For disproportionation of toluene and isomerization of ethylbenzene into xylenes, the TSs are larger than the reaction products. Zeolite ITQ-27 showed high disproportionation activity, and ITQ-64 showed high selectivity for the desired para and ortho isomers. For the case of a product and TS of similar size, we synthesized a catalyst, MIT-1, for the isomerization of endo-dicyclopentane into adamantane.

Simple organic structure directing agents for synthesizing nanocrystalline zeolites.

The synthesis of the ZSM-5 and beta zeolites in their nanosized form has been achieved by using simple alkyl-substituted mono-cationic cyclic ammonium cations as OSDA molecules. The particular combination of a cyclic fragment and a short linear alkyl-chain group (preferentially C4) within the monocationic OSDA molecules allows directing the crystallization of nanosized zeolites with excellent solid yields (above 90%). Interestingly, the formation of the nanosized ZSM-5 and beta zeolites mostly depends on the size and nature of the cyclic fragment of the OSDA molecule, resulting in all cases in nanocrystalline solids with homogeneous distributions of particle sizes (∼10-25 nm) and controlled Si/Al molar ratios (∼15-30). The achieved nanosized ZSM-5 and beta zeolites have been extensively characterized by different techniques to study their physico-chemical properties, such as chemical composition, pore accessibility or Brønsted acidity, among others. Moreover, the catalytic properties of the nanosized ZSM-5 and beta zeolites have been evaluated for different chemical reactions, including methanol-to-olefins (MTO) in the case of ZSM-5, and alkylation of benzene with propylene to obtain cumene and oligomerization of light olefins to liquid fuels in the case of beta, observing in all cases improved catalytic activity and product selectivity towards target products when compared to related catalysts.

High-silica nanocrystalline Beta zeolites: efficient synthesis and catalytic application.

An efficient synthesis methodology to obtain homogeneous nanosized high-silica Beta zeolites (∼10-20 nm) with high solid yields (above 95%) using simple alkyl-substituted flexible dicationic OSDAs is described. These dicationic OSDAs allow the synthesis of nanosized Beta zeolites with different Si/Al ratios (15-30) in alkaline and fluoride media, resulting in nanocrystalline materials with different physico-chemical properties. These nanosized Beta zeolites show better catalytic behavior towards the industrially-relevant alkylation of benzene with propylene to obtain cumene compared with other commercially available nanosized Beta zeolites.

Photogeneration of 2-deoxyribonolactone in benzophenone-purine dyads. Formation of ketyl-C1' biradicals.

Photolysis of the title dyads under aerobic conditions leads to a 2-deoxyribonolactone derivative. Laser flash photolysis reveals that the process occurs from the short-lived benzophenone-like triplet excited state. A mechanism involving intramolecular electron transfer with the purine bases (adenine, guanine, or 8-oxoadenine) as donors is proposed.

Intramolecular exciplexes based on benzoxazole: photophysics and applications as fluorescent cation sensors.

Exciplex behaviour of three benzoxazole derivatives has been detected and intensively investigated by means of steady-state and time-resolved fluorescence techniques and transient absorption spectroscopy. The fluorescence of these compounds shows the properties which are typical for the excited state charge transfer complexes (exciplexes). Besides of the short wavelength fluorescence, which is similar in spectral distribution to the fluorescence of the electron acceptor (2-p-tolyl-benzoxazole), the red shifted, broad and structureless emission band is observed in solvents of low and medium polarity. The detailed analysis of the fluorescence data shows that the ratio of the CT and LE fluorescence initially increases with increasing solvent polarity, achieves a maximum, and drops for more polar solvents (epsilon(s) = 7). Similar behaviour is observed for the exciplex fluorescence lifetimes. The overall fluorescence and the relative intersystem crossing quantum yields show the decrease of these values with increasing solvent polarity. These observations have been explained on the basis of Marcus-type theory for nonradiative charge transfer rate constants. Increasing solvent polarity strongly accelerates the back electron transfer process which recovers the whole molecule in the ground state. The probability of the compact exciplex formation (i.e. sandwich-type structures) depends on solvent viscosity and degree of freedom of the bending of the saturated linker. The compound containing crown ether as a donor subunit may be used as a fluorescent indicator of inorganic cations (barium and lithium). We found an effective complexation of the compound in the ground state with barium and lithium cations. The complex is also stable in the excited state which manifests itself in strong increase of the fluorescence intensity.

Model studies on a carprofen derivative as dual photosensitizer for thymine dimerization and (6-4) photoproduct repair.

Cyclobutane pyrimidine dimers (CPD) and (6-4) photoproducts are among the main UV-induced DNA lesions. Both types of damage are mostly repaired in prokaryotes by photolyase enzymes. The repair mechanism of (6-4) photolyases has still not been fully elucidated, but it is assumed that back rearrangement to the oxetane occurs prior to repair. In this work, a non-steroidal anti-inflammatory drug derivative corresponding to the dechlorinated methyl ester of carprofen (namely methyl 2-(carbazol-2-yl)propanoate, PPMe) has been used to achieve the photosensitized cycloreversion of model oxetanes (formally resulting from photocycloaddition between benzophenone and 1,3-dimethylthymine or 2'-deoxyuridine), by employing fluorescence spectroscopy, laser flash photolysis, HPLC and NMR. Although PPMe is able to photoinduce the cycloreversion of both oxetanes, the fluorescence quenching of PPMe is faster for the 2'-deoxyribose-containing oxetane; this underlines the importance of the structure in such studies. Moreover, PPMe was shown to photoinduce the formation of thymidine cyclobutane dimers through a triplet-triplet energy transfer from a vibrationally excited state, as suggested by the enhanced PPMe triplet quenching by thymidine with increasing temperature. These results reveal a dual role of PPMe in DNA photosensitization, in that it photoinduces either damage or repair.