RESUMO
PURPOSE: The study aimed to obtain a comprehensive 3D visualization of knee specimens, including the cruciate ligaments and corresponding femoral and tibial bone insertions using a non-destructive micro-CT method. METHODS: Knee specimens were fixed in anatomical positions and chemically dehydrated before being scanned using micro-CT with a voxel size of 17.5 µm. RGBA (red, green, blue, alpha) transfer functions were applied to virtually colorize each structure. Following micro-CT scanning, the samples were rehydrated, decalcified, and trimmed based on micro-CT 3D reconstructions as references. Histological evaluations were performed on the trimmed samples. Histological and micro-CT images were registered to morphologically and densitometrically assess the 4-layer insertion of the ACL into the bone. RESULTS: The output of the micro-CT images of the knee in extension and flexion allowed a clear differentiation of the morphologies of both soft and hard tissues, such as the ACL, femoral and tibial bones, and cartilage, and the subsequent creation of 3D composite models useful for accurately tracing the entire morphology of the ligament, including its fiber and bundle components, the trajectory between the femur and tibia, and the size, extension, and morphology of its insertions into the bones. CONCLUSION: The implementation of the non-destructive micro-CT method allowed complete visualization of all the different components of the knee specimens. This allowed correlative imaging by micro-CT and histology, accurate planning of histological sections, and virtual anatomical and microstructural analysis. The micro-CT approach provided an unprecedented 3D level of detail, offering a viable means to study ACL anatomy.
Assuntos
Lesões do Ligamento Cruzado Anterior , Ligamento Cruzado Anterior , Humanos , Ligamento Cruzado Anterior/diagnóstico por imagem , Ligamento Cruzado Anterior/anatomia & histologia , Microtomografia por Raio-X , Imageamento Tridimensional/métodos , Articulação do Joelho/diagnóstico por imagem , Tíbia/diagnóstico por imagem , Fêmur/diagnóstico por imagemRESUMO
The 3D functional reconstruction of a whole organ or organism down to the single cell level and to the subcellular components and molecules is a major future scientific challenge. The recent convergence of advanced imaging techniques with an impressively increased computing power allowed early attempts to translate and combine 2D images and functional data to obtain in-silico organ 3D models. This review first describes the experimental pipeline required for organ 3D reconstruction: from the collection of 2D serial images obtained with light, confocal, light-sheet microscopy or tomography, followed by their registration, segmentation and subsequent 3D rendering. Then, we summarise the results of investigations performed so far by applying these 3D image analyses to the study of the female and male mammalian gonads. These studies highlight the importance of working towards a 3D in-silico model of the ovary and testis as a tool to gain insights into their biology during the phases of differentiation or adulthood, in normal or pathological conditions. Furthermore, the use of 3D imaging approaches opens to key technical improvements, ranging from image acquisition to optimisation and development of new processing tools, and unfolds novel possibilities for multidisciplinary research.
Assuntos
Imageamento Tridimensional , Microscopia Confocal , Ovário/anatomia & histologia , Ovário/diagnóstico por imagem , Medicina Reprodutiva , Testículo/anatomia & histologia , Testículo/diagnóstico por imagem , Tomografia , Animais , Difusão de Inovações , Feminino , Fertilidade , Humanos , Masculino , Oogênese , Ovário/fisiologia , Valor Preditivo dos Testes , Espermatogênese , Testículo/fisiologiaRESUMO
Chondral and osteochondral lesions represent one of the most challenging problems in the orthopedic field, as these types of injuries lead to disability and worsened quality of life for patients and have an economic impact on the healthcare system. The aim of this in vivo study was to develop a new tissue engineering approach through a hybrid scaffold for osteochondral tissue regeneration made of porous polyurethane foam (PU) coated under vacuum with calcium phosphates (PU/VAC). Scaffold characterization showed a highly porous and interconnected structure. Human amniotic mesenchymal stromal cells (hAMSCs) were loaded into scaffolds using pectin (PECT) as a carrier. Osteochondral defects in medial femoral condyles of rabbits were created and randomly allocated in one of the following groups: plain scaffold (PU/VAC), scaffold with hAMSCs injected in the implant site (PU/VAC/hAMSC), scaffold with hAMSCs loaded in pectin (PU/VAC/PECT/hAMSC), and no treated defects (untreated). The therapeutic efficacy was assessed by macroscopic, histological, histomorphometric, microtomographic, and ultrastructural analyses at 3, 6, 12, and 24 weeks. Histological results showed that the scaffold was permissive to tissue growth and penetration, an immature osteocartilaginous tissue was observed at early experimental times, with a more accentuated bone regeneration in comparison with the cartilage layer in the absence of any inflammatory reaction.
Assuntos
Materiais Biomiméticos , Regeneração Óssea , Cartilagem Articular , Fêmur , Transplante de Células-Tronco Mesenquimais , Células-Tronco Mesenquimais , Alicerces Teciduais/química , Animais , Materiais Biomiméticos/química , Materiais Biomiméticos/farmacologia , Cartilagem Articular/lesões , Cartilagem Articular/metabolismo , Células Imobilizadas , Fêmur/lesões , Fêmur/metabolismo , Xenoenxertos , Humanos , Masculino , CoelhosRESUMO
BACKGROUND: Surgical repair of critical-sized bone defects still remains a big challenge in orthopedic surgery. Biological enhancement, such as growth factors or cells, can stimulate a better outcome in bone regeneration driven by well-established treatments such as allogenic bone graft. However, despite the surgical options available, correct healing can be slowed down or compromised by insufficient vascular supply to the injured site. MATERIALS AND METHODS: In this pilot study, critical size bone defects in rabbit radius were treated with allograft bone, in combination with vascular bundle and autologous bone marrow concentrate seeded onto a commercial collagen scaffold. Microtomographical, histological and immunohistochemical assessments were performed to evaluate allograft integration and bone regeneration. RESULTS: Results showed that the surgical deviation of vascular bundle in the bone graft, regardless from the addition of bone marrow concentrate, promote the onset of healing process at short experimental times (8 wk) in comparison with the other groups, enhancing graft integration. CONCLUSION: The surgical procedure tested stimulates bone healing at early times, preserving native bone architecture, and can be easily combined with biological adjuvant.
Assuntos
Transplante de Medula Óssea/métodos , Regeneração Óssea , Transplante Ósseo/métodos , Rádio (Anatomia)/lesões , Aloenxertos , Animais , Colágeno , Modelos Animais de Doenças , Humanos , Projetos Piloto , Coelhos , Rádio (Anatomia)/irrigação sanguínea , Alicerces Teciduais , Transplante Autólogo , Transplante Homólogo , CicatrizaçãoRESUMO
Despite alternatives to autogenous bone graft for spinal fusion have been investigated, it has been shown that osteoconductive materials alone do not give a rate of fusion comparable with autogenous bone. This study analyzed a strontium substituted ß-tricalcium phosphate (Sr-ßTCP) associated with syngeneic, unexpanded, and undifferentiated mesenchymal stem cells from bone marrow (BMSC) or adipose tissue (ADSC) as a new tissue engineering approach for spinal fusion procedures. A posterolateral fusion was performed in 15 ovariectomized (OVX) and 15 sham-operated (SHAM) Inbred rats. Both SHAM and OVX animals were divided into three groups: Sr-ßTCP, Sr-ßTCP + BMCSs, and Sr-ßTCP + ADSCs. Animals were euthanized 8 weeks after surgery and the spines evaluated by manual palpation, micro-CT, and histology. For both SHAM and OVX animals, the fusion tissue in the Sr-ßTCP + BMSCs group was more solid. This effect was significantly higher in OVX animals by comparing the Sr-ßTCP + BMCSs group with Sr-ßTCP + ADSCs. Radiographical score, based on micro-CT 2D image, highlighted that the Sr-ßTCP + BMCSs group presented a similar fusion to Sr-ßTCP and higher than Sr-ßTCP + ADSCs in both SHAM and OVX animals. Micro-CT 3D parameters did not show significant differences among groups. Histological score showed significantly higher fusion in Sr-ßTCP + BMSCs group than Sr-ßTCP and Sr-ßTCP + ADSCs, for both SHAM and OVX animals. In conclusion, our results suggest that addition of BMSCs to a Sr-ßTCP improve bone formation and fusion, both in osteoporotic and nonosteoporotic animal, whereas spinal fusion is not enhanced in rats treated with Sr-ßTCP + ADSCs. Thus, for conducting cells therapy in spinal surgery BMSCs still seems to be a better choice compared with ADSCs.
Assuntos
Tecido Adiposo/efeitos dos fármacos , Medula Óssea/efeitos dos fármacos , Fosfatos de Cálcio/farmacologia , Células-Tronco Mesenquimais/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Estrôncio/farmacologia , Animais , Regeneração Óssea/efeitos dos fármacos , Feminino , Vértebras Lombares/efeitos dos fármacos , Transplante de Células-Tronco Mesenquimais/métodos , Osteoporose/tratamento farmacológico , Ovariectomia/métodos , Ratos , Fusão Vertebral/métodos , Engenharia Tecidual/métodosRESUMO
PURPOSE: To evaluate the regenerative potential of surnatants (SNs) from bone marrow concentrate (SN-BMC) and expanded mesenchymal stromal cells (SN-MSCs) loaded onto a collagen scaffold (SC) in comparison with cell-based treatments (BMC and MSCs) in an osteochondral (OC) defect model in rabbits. METHODS: OC defects (3 × 5 mm) were created in the rabbit femoral condyles and treated with SC alone or combined with SN-BMC, SN-MSCs, BMC, and MSCs. In control groups, the defects were left untreated. At three and six months, the quality of regenerated tissue was evaluated with macroscopic, histologic, microtomographic, and immunohistochemical assessments. The production of several immunoenzymatic markers was measured in the synovial fluid. RESULTS: All proposed treatments improved OC regeneration in comparison with untreated and SC-treated defects. Both BMC and MSCs showed a similar healing potential than their respective SNs, with the best performance exerted by BMC as demonstrated with macroscopic and histological scores and type I and II collagen results. CONCLUSIONS: SNs loaded onto SC exerted a positive effect on OC defect regeneration, underlying the biological significance of the trophic factors, thus potentially opening new opportunities for the use of cell-free-based therapies. BMC was confirmed to be the most beneficial treatment.
Assuntos
Transplante de Medula Óssea , Fraturas Intra-Articulares/cirurgia , Transplante de Células-Tronco Mesenquimais , Animais , Medula Óssea/cirurgia , Células da Medula Óssea , Colágeno/metabolismo , Articulação do Joelho , Células-Tronco Mesenquimais/fisiologia , Modelos Animais , Coelhos , CicatrizaçãoRESUMO
Several biomaterials have recently been developed to address the challenge of osteochondral regeneration. Among these, chitosan holds promises both for cartilage and bone healing. The aim of this in vivo study was to evaluate the regeneration potential of a novel hybrid magnesium-doped hydroxyapatite (MgHA), collagen, chitosan-based scaffold, which was tested in a sheep model to ascertain its osteochondral regenerative potential, and in a rabbit model to further evaluate its ability to regenerate bone tissue. Macroscopic, microtomography, histology, histomorphometry, and immunohistochemical analysis were performed. In the sheep model, all analyses did not show significant differences compared to untreated defects (p > 0.05), with no evidence of cartilage and subchondral bone regeneration. In the rabbit model, this bone scaffold provided less ability to enhance tissue healing compared with a commercial bone scaffold. Moreover, persistence of scaffold material and absence of integration with connective tissue around the scaffolds were observed. These results raised some concerns about the osteochondral use of this chitosan composite scaffold, especially for the bone layer. Further studies are needed to explore the best formulation of chitosan-reinforced composites for osteochondral treatment.
Assuntos
Regeneração Óssea , Quitosana/análogos & derivados , Alicerces Teciduais/efeitos adversos , Animais , Cartilagem/efeitos dos fármacos , Colágeno/química , Durapatita/química , Masculino , Coelhos , Ovinos , Alicerces Teciduais/químicaRESUMO
The fascinating prospect to direct tissue regeneration by magnetic activation has been recently explored. In this study we investigate the possibility to boost bone regeneration in an experimental defect in rabbit femoral condyle by combining static magnetic fields and magnetic biomaterials. NdFeB permanent magnets are implanted close to biomimetic collagen/hydroxyapatite resorbable scaffolds magnetized according to two different protocols . Permanent magnet only or non-magnetic scaffolds are used as controls. Bone tissue regeneration is evaluated at 12 weeks from surgery from a histological, histomorphometric and biomechanical point of view. The reorganization of the magnetized collagen fibers under the effect of the static magnetic field generated by the permanent magnet produces a highly-peculiar bone pattern, with highly-interconnected trabeculae orthogonally oriented with respect to the magnetic field lines. In contrast, only partial defect healing is achieved within the control groups. We ascribe the peculiar bone regeneration to the transfer of micro-environmental information, mediated by collagen fibrils magnetized by magnetic nanoparticles, under the effect of the static magnetic field. These results open new perspectives on the possibility to improve implant fixation and control the morphology and maturity of regenerated bone providing "in site" forces by synergically combining static magnetic fields and biomaterials.
Assuntos
Materiais Biocompatíveis , Regeneração Óssea/efeitos da radiação , Magnetismo , Animais , Colágeno , Durapatita , Fêmur , Masculino , Teste de Materiais , Coelhos , Engenharia Tecidual/métodos , Alicerces TeciduaisRESUMO
The paper presents results of physico-chemical and biological investigations of a surface-engineered synthetic bone filler. Surface analysis confirms that the ceramic phosphate granules present a collagen nanolayer to the surrounding environment. Cell cultures tests show that, in agreement with literature reports, surface-immobilized collagen molecular cues can stimulate progression along the osteogenic pathway of undifferentiated human mesenchymal cells. Finally, in vivo test in a rabbit model of critical bone defects shows statistically significant increase of bone volume and mineral apposition rate between the biomimetic bone filler and collagen-free control. All together, obtained data confirm that biomolecular surface engineering can upgrade the properties of implant device, by promoting more specific and targeted implant-host cells interactions.
Assuntos
Regeneração Óssea/fisiologia , Substitutos Ósseos/química , Substitutos Ósseos/uso terapêutico , Fosfatos de Cálcio/química , Durapatita/química , Fraturas do Fêmur/terapia , Animais , Materiais Biomiméticos/síntese química , Regeneração Óssea/efeitos dos fármacos , Fraturas do Fêmur/patologia , Masculino , Teste de Materiais , Coelhos , Propriedades de Superfície , Resultado do TratamentoRESUMO
PURPOSE: To investigate the effects of titanium implants functionalised with collagen type I (TiColl) on bone regeneration and osteointegration in a healthy and osteopenic rat animal model. METHOD: TiColl screws were implanted into the femoral condyles of healthy and osteopenic rats and compared with acid-etched titanium (Ti) screws. The osteointegration process was evaluated by a complementary approach combining microtomographic, histological, histomorphometric and biomechanical investigations at four and 12 weeks. RESULTS: The TiColl screw also ensured a greater mechanical stability; the push-out values for TiColl screws increased from four to 12 weeks (+28 %). The energy necessary to detach the bone from the screw was significantly higher for TiColl-functionalised screws in comparison to Ti screws (+23 %) at 12 weeks. Histomorphometric investigation revealed that total bone-to-implant contact was higher in TiColl screws in comparison to Ti screws (P < 0.05) and at epiphyseal level, increased bone-to-implant contact was found with TiColl screws in comparison to Ti screws (P < 0.05) in an ovariectomy (OVX) condition. A significant increase in the measured total bone ingrowth from four to 12 weeks was detected for both materials, but more significant for the TiColl material (P < 0.0005). Finally, bone ingrowth in the TiColl group was significantly higher (P < 0.005) in comparison to that of Ti screws in the SHAM condition at metaphyseal level at 12 weeks. CONCLUSION: The present results showed that TiColl is effective in promoting implant osteointegration even in compromised bone.
Assuntos
Doenças Ósseas Metabólicas/cirurgia , Colágeno Tipo I/farmacologia , Fêmur/efeitos dos fármacos , Osseointegração/efeitos dos fármacos , Animais , Regeneração Óssea/efeitos dos fármacos , Regeneração Óssea/fisiologia , Parafusos Ósseos , Materiais Revestidos Biocompatíveis , Modelos Animais de Doenças , Feminino , Fêmur/fisiopatologia , Fêmur/cirurgia , Humanos , Osseointegração/fisiologia , Desenho de Prótese , Ratos , Ratos Sprague-Dawley , TitânioRESUMO
Few data are available on the effect of biomaterials on surface antigens of mammalian bone marrow-derived, adult mesenchymal stromal cells (MSCs). Since poly(L-lactic acid) or PLLA is largely used in tissue engineering of human bones, and we are developing a reverse engineering program to prototype with biomaterials the vascular architecture of bones for their bioartificial reconstruction, both in humans and animal models, we have studied the effect of porous, flat and smooth PLLA scaffolds on the immunophenotype of in vitro grown, rat MSCs in the absence of any coating, co-polymeric enrichment, and differentiation stimuli. Similar to controls on plastic, we show that our PLLA scaffold does not modify the distribution of some surface markers in rat MSCs. In particular, the maintained expression of CD73 and CD90 on two different subpopulations (small and large cells) is consistent with their adhesion to the PLLA scaffold through specialized appendages, and to their prominent content in actin. In addition, our PLLA scaffold favours retention of the intermediate filament desmin, believed a putative marker of undifferentiated state. Finally, it preserves all rat MSCs morphotypes, and allows for their survival, adhesion to the substrate, and replication. Remarkably, a subpopulation of rat MSCs grown on our PLLA scaffold exhibited formation of membrane protrusions of uncertain significance, although in a size range and morphology compatible with either motility blebs or shedding vesicles. In summary, our PLLA scaffold has no detrimental effect on a number of features of rat MSCs, primarily the expression of CD73 and CD90.
Assuntos
Células da Medula Óssea/efeitos dos fármacos , Proliferação de Células/efeitos dos fármacos , Ácido Láctico/farmacologia , Células-Tronco Mesenquimais/efeitos dos fármacos , Polímeros/farmacologia , Alicerces Teciduais , 5'-Nucleotidase/metabolismo , Animais , Biomarcadores/metabolismo , Células da Medula Óssea/metabolismo , Células da Medula Óssea/fisiologia , Diferenciação Celular/efeitos dos fármacos , Células Cultivadas , Imunofenotipagem , Ácido Láctico/química , Masculino , Teste de Materiais , Células-Tronco Mesenquimais/metabolismo , Células-Tronco Mesenquimais/fisiologia , Poliésteres , Polímeros/química , Porosidade , Ratos , Ratos Sprague-Dawley , Antígenos Thy-1/metabolismo , Alicerces Teciduais/químicaRESUMO
Three-dimensional information is essential for a proper understanding of the healing potential of the menisci and their overall role in the knee joint. However, to date, the study of meniscal vascularity has relied primarily on two-dimensional imaging techniques. Here we present a method to elucidate the intricate 3D meniscal vascular network, revealing its spatial arrangement, connectivity and density. A polymerizing contrast agent was injected into the femoral artery of human cadaver legs, and the meniscal microvasculature was examined using micro-computed tomography at different levels of detail and resolution. The 3D vascular network was quantitatively assessed in a zone-base analysis using parameters such as diameter, length, tortuosity, and branching patterns. The results of this study revealed distinct vascular patterns within the meniscus, with the highest vascular volume found in the outer perimeniscal zone. Variations in vascular parameters were found between the different circumferential and radial meniscal zones. Moreover, through state-of-the-art 3D visualization using micro-CT, this study highlighted the importance of spatial resolution in accurately characterizing the vascular network. These findings, both from this study and from future research using this technique, improve our understanding of microvascular distribution, which may lead to improved therapeutic strategies.
Assuntos
Imageamento Tridimensional , Microvasos , Microtomografia por Raio-X , Humanos , Imageamento Tridimensional/métodos , Microvasos/diagnóstico por imagem , Microtomografia por Raio-X/métodos , Meniscos Tibiais/diagnóstico por imagem , Meniscos Tibiais/irrigação sanguínea , Menisco/diagnóstico por imagem , Masculino , Cadáver , FemininoRESUMO
Rechargeable garnet-based solid-state Li batteries hold immense promise as nonflammable, nontoxic, and high energy density energy storage systems, employing Li7La3Zr2O12 (LLZO) with a garnet-type structure as the solid-state electrolyte. Despite substantial progress in this field, the advancement and eventual commercialization of garnet-based solid-state Li batteries are impeded by void formation at the LLZO/Li interface at practical current densities and areal capacities beyond 1 mA cm-2 and 1 mAh cm-2, respectively, resulting in limited cycling stability and the emergence of Li dendrites. Additionally, developing a fabrication approach for thin LLZO electrolytes to achieve high energy density remains paramount. To address these critical challenges, herein, we present a facile methodology for fabricating self-standing, 50 µm thick, porous LLZO membranes with a small pore size of ca. 2.3 µm and an average porosity of 51%, resulting in a specific surface area of 1.3 µm-1, the highest reported to date. The use of such LLZO membranes significantly increases the Li/LLZO contact area, effectively mitigating void formation. This methodology combines two key elements: (i) the use of small pore formers of ca. 1.5 µm and (ii) the use of ultrafast sintering, which circumvents ceramics overdensification using rapid heating/cooling rates of ca. 50 °C per second. The fabricated porous LLZO membranes demonstrate exceptional cycling stability in a symmetrical Li/LLZO/Li cell configuration, exceeding 600 h of continuous operation at a current density of 0.1 mA cm-2.
RESUMO
Understanding the microstructure of fibrous tissues, like ligaments, is crucial due to their nonlinear stress-strain behavior from unique fiber arrangements. This study introduces a new method to analyze the relationship between the microstructure and function of anterior cruciate ligaments (ACL). We tested the procedure on two ACL samples, one from a healthy individual and one from an osteoarthritis patient, using a custom tensioning device within a micro-CT scanner. The samples were stretched and scanned at various strain levels (namely 0%, 1%, 2%, 3%, 4%, 6%, 8%) to observe the effects of mechanical stress on the microstructure. The micro-CT images were processed to identify and map fibers, assessing their orientations and volume fractions. A probabilistic mathematical model was then proposed to relate the geometric and structural characteristics of the ACL to its mechanical properties, considering fiber orientation and thickness. Our feasibility test indicated differences in mechanical behavior, fiber orientation, and volume distribution between ligaments of different origins. These indicative results align with existing literature, validating the proposed methodology. However, further research is needed to confirm these preliminary observations. Overall, our comprehensive methodology shows promise for improving ACL diagnosis and treatment and for guiding the creation of tissue-engineered grafts that mimic the natural properties and microstructure of healthy tissue, thereby enhancing integration and performance in biomedical applications.
RESUMO
BACKGROUND: Metal-on-metal hip resurfacing arthroplasty (HR) has been gaining popularity especially for young and active patients. Although different series report good mid-term results, the long-term outcome and failure mechanisms are still concerning. In this consecutive revision case series, 9 retrieved specimens of a failed Birmingham Hip Resurfacing (BHR) were divided according to the time to fracture: 3 specimens failed at less than 6 months (Group 1), 3 failed between 6 months and 3 years (Group 2) and 3 failed later than 3 years (Group 3). The objective of the study was to examine by a specific quantitative histomorphometry and microtomography (micro-CT) method the characteristics of bone quality and its microarchitecture in retrieved metal-on-metal HR. METHODS: A series of 948 BHR were performed between 2001 and 2009. Among these implants 10 failures occurred and nine of these underwent revision surgery and were examined by histomorphometry and micro-CT. RESULTS: Histomorphometry showed a significant increase in trabecular separation (Tb.Sp) in Group 3 in comparison with Group 1 (113%, p < 0.05). In the top region, micro-CT showed that Groups 2 and 3 presented significant lower bone volume (Group 2: 61%, p < 0.005; Group 3: 1%, p < 0.05), trabecular number (Group 2: 53%, p < 0.005; Group 3: 40%, p < 0.05), and higher Tb.Sp (Group: 71%,p < 0.05) when compared to Group 1. Additionally, histomorphometry showed that the top regions in Group 1 had a significantly lower mean percentage of empty osteocyte lacunae than the top regions in both Group 2 and 3 (p < 0.05). CONCLUSIONS: This study showed that the morphometric parameters considered are crucial for a good understanding of mechanical properties of HR and may be of significant importance in the pathogenesis of HR failure particularly in the development of late fractures.
Assuntos
Artroplastia de Quadril/instrumentação , Articulação do Quadril/cirurgia , Prótese de Quadril , Falha de Prótese , Microtomografia por Raio-X , Idoso , Artroplastia de Quadril/efeitos adversos , Fenômenos Biomecânicos , Feminino , Articulação do Quadril/diagnóstico por imagem , Articulação do Quadril/patologia , Humanos , Masculino , Metais , Pessoa de Meia-Idade , Método de Monte Carlo , Valor Preditivo dos Testes , Desenho de Prótese , Reoperação , Estudos Retrospectivos , Fatores de Risco , Fatores de Tempo , Falha de TratamentoRESUMO
Sodium-metal batteries are promising candidates for low-cost, large-format energy storage systems. However, sodium-metal batteries suffer from high interfacial resistance between the electrodes and the solid electrolyte, leading to poor electrochemical performance. We demonstrate a sodium superionic conductor (NASICON) with an oriented porous framework of sodium aluminum titanium phosphate (NATP) fabricated by the freeze-casting technique, which shows excellent properties as a solid electrolyte. Using X-ray computed tomography, we confirm the uniform low-tortuosity channels present along the thickness of the scaffold. We infiltrated the porous NATP scaffolds with sodium vanadium phosphate (NVP) cathode nanoparticles achieving mass loadings of â¼3-4 mg cm-2, which enables short sodium ion diffusion path lengths. For the resulting hybrid cell, we achieved a capacity of â¼90 mAh g-1 at a specific current of 50 mA g-1 (â¼300 Wh kg-1) for over 100 cycles with â¼94% capacity retention. Our study offers valuable insights for the design of hybrid solid electrolyte-cathode active material structures to achieve improved electrochemical performance through low-tortuosity ion transport networks.
RESUMO
PURPOSE: The osseous spiral lamina (OSL) is an inner cochlear bony structure that projects from the modiolus from base to apex, separating the cochlear canal into the scala vestibuli and scala tympani. The porosity of the OSL has recently attracted the attention of scientists due to its potential impact on the overall sound transduction. The bony pillars between the vestibular and tympanic plates of the OSL are not always visible in conventional histopathological studies, so imaging of such structures is usually lacking or incomplete. With this pilot study, we aimed, for the first time, to anatomically demonstrate the OSL in great detail and in 3D. METHODS: We measured width, thickness, and porosity of the human OSL by microCT using increasing nominal resolutions up to 2.5-µm voxel size. Additionally, 3D models of the individual plates at the basal and middle turns and the apex were created from the CT datasets. RESULTS: We found a constant presence of porosity in both tympanic plate and vestibular plate from basal turn to the apex. The tympanic plate appears to be more porous than vestibular plate in the basal and middle turns, while it is less porous in the apex. Furthermore, the 3D reconstruction allowed the bony pillars that lie between the OSL plates to be observed in great detail. CONCLUSION: By enhancing our comprehension of the OSL, we can advance our comprehension of hearing mechanisms and enhance the accuracy and effectiveness of cochlear models.
Assuntos
Cóclea , Audição , Humanos , Lâmina Espiral , Microtomografia por Raio-X , Projetos Piloto , Cóclea/patologia , Audição/fisiologiaRESUMO
Li dendrites form in Li7 La3 Zr2 O12 (LLZO) solid electrolytes due to intrinsic volume changes of Li and the appearance of voids at the Li metal/LLZO interface. Bilayer dense-porous LLZO membranes make for a compelling solution of this pertinent challenge in the field of Li-garnet solid-state batteries (SSB). Lithium is thus stored in the pores of the LLZO, thereby avoiding i) dynamic changes of the anode volume and ii) the formation of voids during Li stripping due to increased surface area of the Li/LLZO interface. The dense layer then additionally reduces the probability of short circuits during cell charging. In this work, a method for producing such bilayer membranes utilizing sequential tape-casting of porous and dense layers is reported. The minimum attainable thicknesses are 8-10 µm for dense and 32-35 µm for porous layers, enabling gravimetric and volumetric energy densities of Li-garnet SSBs of 279 Wh kg-1 and 1003 Wh L-1 , respectively. Bilayer LLZO membranes in symmetrical cell configuration exhibit high critical current density up to 6 mA cm-2 and cycling stability of over 160 cycles at a current density of 0.5 mA cm-2 at an areal capacity limitation of 0.25 mAh cm-2 .
RESUMO
Even though the systemic antibiotic therapy is usually applied after prosthetic infections surgical treatments, it is unable to reach the infection site in sufficient concentrations to eradicate bacteria. Delivering antibiotics locally with the use of custom made device (spacer or nail coating) might eradicate or reduce the infection and the risk of recolonization, providing a very high concentration of antibiotic. PMMA-based (Mendec Spine) composites with BaSO(4) were enriched with ß-tricalcium phosphate (Porosectan-TCP) or only a slightly higher BaSO(4) concentration (Porosectan-BaSO(4)) to obtain higher porosity. The aim of the study was to evaluate: (i) drug absorption capability and drug release kinetics in vitro soaking them with a combined solution of gentamicin and vancomycin, (ii) their in vitro and in vivo biocompatibility, and finally, (iii) they were tested preliminarily in an experimental model of bone infection. The simultaneous presence of ß-TCP and BaSO(4) resulted in the formation of a texture of interconnecting channels with different diameters, from a few microns to several hundred microns, which totally filled the material. The porosity, determined by microcomputed tomography, was significantly higher in both tested plain composites (Porosectan-TCP: +17.3%; Porosectan-BaSO(4): +7.5%) in comparison to control composite material (Mendec Spine). The kinetics of antibiotic release from composites was rapid and complete, producing high drug concentrations for a short period of time. Both composites showed a good level of biocompatibility. The osteomyelitic model confirmed that both composites, soaked in antibiotic solution, were able to cure bone infection. These composites could be useful for preparing devices for prosthetic joint infections treatment also allowing the use of antibiotics solution at required concentrations.
Assuntos
Materiais Biocompatíveis/síntese química , Sistemas de Liberação de Medicamentos , Equipamentos e Provisões , Polimetil Metacrilato/síntese química , Infecções Relacionadas à Prótese/tratamento farmacológico , Animais , Antibacterianos/administração & dosagem , Compostos de Bário/química , Materiais Biocompatíveis/química , Materiais Biocompatíveis/farmacocinética , Células Cultivadas , Combinação de Medicamentos , Gentamicinas/administração & dosagem , Humanos , Masculino , Teste de Materiais , Unhas/efeitos dos fármacos , Unhas/metabolismo , Osteomielite/tratamento farmacológico , Osteomielite/metabolismo , Polímeros/síntese química , Polímeros/química , Polímeros/farmacocinética , Polimetil Metacrilato/química , Infecções Relacionadas à Prótese/metabolismo , Coelhos , Vancomicina/administração & dosagemRESUMO
Purpose: Otospongiotic plaques can be seen on conventional computed tomography (CT) as focal lesions around the cochlea. However, the resolution remains insufficient to enable evaluation of intracochlear damage. MicroCT technology provides resolution at the single micron level, offering an exceptional amplified view of the otosclerotic cochlea. In this study, a non-decalcified otosclerotic cochlea was analyzed and reconstructed in three dimensions for the first time, using microCT technology. The pre-clinical relevance of this study is the demonstration of extensive pro-inflammatory buildup inside the cochlea which cannot be seen with conventional cone-beam CT (CBCT) investigation. Materials and Methods: A radiological and a three-dimensional (3D) anatomical study of an otosclerotic cochlea using microCT technology is presented here for the first time. 3D-segmentation of the human cochlea was performed, providing an unprecedented view of the diseased area without the need for decalcification, sectioning, or staining. Results: Using microCT at single micron resolution and geometric reconstructions, it was possible to visualize the disease's effects. These included intensive tissue remodeling and highly vascularized areas with dilated capillaries around the spongiotic foci seen on the pericochlear bone. The cochlea's architecture as a morphological correlate of the otosclerosis was also seen. With a sagittal cut of the 3D mesh, it was possible to visualize intense ossification of the cochlear apex, as well as the internal auditory canal, the modiolus, the spiral ligament, and a large cochleolith over the osseous spiral lamina. In addition, the oval and round windows showed intense fibrotic tissue formation and spongiotic bone with increased vascularization. Given the recently described importance of the osseous spiral lamina in hearing mechanics and that, clinically, one of the signs of otosclerosis is the Carhart notch observed on the audiogram, a tonotopic map using the osseous spiral lamina as region of interest is presented. An additional quantitative study of the porosity and width of the osseous spiral lamina is reported. Conclusion: In this study, structural anatomical alterations of the otosclerotic cochlea were visualized in 3D for the first time. MicroCT suggested that even though the disease may not appear to be advanced in standard clinical CT scans, intense tissue remodeling is already ongoing inside the cochlea. That knowledge will have a great impact on further treatment of patients presenting with sensorineural hearing loss.