Adjuvant therapy with a 980-nm diode laser in root canal retreatment: randomized clinical trial with 1-year follow-up.

The purpose of this study is to assess the laser effect in root canal disinfection and periapical healing of endodontically treated teeth from patients with asymptomatic apical periodontitis. This study was performed as a randomized clinical trial. Thirty patients were selected according to the inclusion/exclusion criteria. Fifteen patients received the root canal retreatment (RCR) combined with 980-nm diode laser irradiation (LI). The canals were irrigated with saline solution and gently dried with paper points, keeping the dentin partially moist. The irradiation was performed using a 320-µm-diameter fiber in helicoidal movements (pulsed mode, power output of 1.5 W, 100 Hz for 20 s). The other 15 patients received the RCR with placebo irradiation (PI). Microbiological samples were taken in three periods: S1, after the filling material removal (baseline); S2, after laser or placebo irradiation (LI or PI); and S3, after the RCR followed by laser or placebo. The samples were submitted to the total microbial and E. faecalis counting. The periapical radiographic healing was analyzed after 3, 6, 9, and 12 months. Microbiological data (CFU/mg) were analyzed by ANOVA and Tukey's test (P < 0.05), and the repair by Mann-Whitney test (P < 0.05). In S2, the laser provided 42.44% microbial reduction and 53.14% of E. faecalis, different from the placebo that had no reduction, and 4.85% for Enterococcus (P < 0.05). In S3, the bacterial counts decreased without differences between groups. No differences in healing were found at 3 months. However, diode laser facilitated the repair from 3- to 12-month follow-up (P < 0.05) and had 45% more healed cases than placebo. Diode laser provided an antimicrobial effect before the biomechanical preparation but was not synergistic in RCR. It improved the periapical healing during follow-up.

Is the quality of root canal filling obtained by cone-beam computed tomography associated with periapical lesions? A systematic review and meta-analysis.

AIM: To evaluate the influence of root canal filling quality on periapical lesion status using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: The bibliographic search was conducted in electronic databases of PubMed, Embase, Scopus, and Web of Science without restrictions related to the year of publication and language. Inclusion criteria were prospective or retrospective cohort studies that followed periapical pathosis for, at least, 1 year. Three reviewers independently evaluated the eligibility for inclusion, extracted data, and assessed the risk of bias. The quality of the studies was based on the Newcastle-Ottawa Scale. This meta-analysis was performed to evaluate the quality of treatment by the homogeneity and apical extension of the filling. RESULTS: Of the 1179 studies initially recovered, six cohort studies were included, out of which four were considered with a low risk of bias. The results showed that the absence of gaps in the filling reduced the chance of unhealed periapical lesions by 2.39 times (RR = 2.39; 95% CI: 1.62-3.53; p < 0.00001; I2 = 55%). An apical filling extension of 0-2 mm below the apex also contributed significantly to the absence of unhealed periapical lesions (RR = 1.49; 95% CI: 1.15-1.94; p = 0.003; I2 = 2%). CONCLUSION: The homogeneity and apical extension of the filling influenced the presence of unhealed periapical lesions in endodontically treated teeth evaluated using CBCT. CLINICAL RELEVANCE: Apical extension of the filling ranging between 0 and 2 mm short of the apical foramen and the homogeneity of the filling without gaps are directly related to the success rate of root canal treatment.

Dentin pretreatment with Er:YAG laser and sodium ascorbate to improve the bond strength of glass fiber post.

Root-filled teeth that received fiber posts most frequently fail at the adhesive interface between resin cement and dentin. The objective of this study is to evaluate the effect of Er:YAG laser and/or sodium ascorbate (SA) on bond strength, microhardness of dentin, and penetration depth of cement into dentinal tubules. Forty-eight bovine incisor roots were endodontically treated, post spaces were prepared and equally divided into four groups (n = 12): G1-distilled water (control); G2-10% SA (10 min); G3-Er:YAG laser (150 mJ/4 Hz/40 s), and G4-Er:YAG laser + 10% SA. Glass fiber posts were cemented and roots sectioned into slices. In the first slice, the push-out bond strength (MPa) and failures were analyzed by confocal laser scanning microscope (CLSM). The second slice was subjected to microhardness test (KHN) and CLSM to assess the cement penetration. ANOVA and Tukey test were used for bond strength and microhardness data and Kruskal-Wallis and Dunn tests for the cement penetration (α = .05). The SA-treated samples had higher bond strength (10.02 ± 5.45a), similar to Er:YAG laser (9.91 ± 4.62a) and Er:YAG laser + SA (8.09 ± 4.07a). The least values (P < .05) were found on control (4.02 ± 2.39b). Significant differences were observed on root thirds (P < .05): cervical > middle > apical. There was a predominance of adhesive failures. The microhardness test revealed no differences between groups (P > .05). The experimental groups (G2, G3, and G4) had highest penetration into dentinal tubules when compared to the control (G1). Dentin pretreatments with Er:YAG laser or SA improved bond strength of cement-post-dentin interfaces; however, no synergistic effect of both treatments combined was observed.

Antibiofilm and antimicrobial activity of temporary filling materials on root canals: an in situ acid challenge.

The present study evaluated the antibiofilm and antimicrobial effects of temporary restorative materials on root canals after an intra-oral challenge. Seventy roots were endodontically treated and divided into 5 groups: high-viscosity glass ionomer (HV-GIC), light-activated glass ionomer (RM-GIC), zinc-oxide cement without eugenol (ZO), zinc-oxide cement with eugenol (ZOE), and unsealed roots (negative control). For 28 days, 14 participants used intra-oral devices with five roots, and drops of sucrose were applied onto them. The amount of biofilm and the bacterial counts were analyzed by Kruskal-Wallis and Dunn, and by two-way ANOVA and Tukey (α = 0.05). HV-GIC and RM-GIC better inhibit biofilm, followed by ZO and ZOE. Unsealed roots had the largest biofilm accumulation (p = 0.002) and higher bacterial penetration than restored roots (p = 0.023). A low amount of Streptococcus was found in RM-GIC and ZOE-restored roots without difference from HV-GIC (p = 0.021). The low amount of Enterococcus (p = 0.003) was found in the ZOE-restored roots, without difference from GICs.

Guided endodontics of calcified canals: The drilling path of rotary systems and intracanal dentin wear.

This study evaluated the drilling path (mm) and the dentin wear (mm3 ) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone-beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides. The access cavity was drilled with 1.0-mm-diameter bur (DSP) and 0.8-mm-diameter bur (Munce). Postoperative CBCT was performed, and the images obtained preoperative and postoperative were superimposed for the analyses. Data were analysed by a t-test and linear regression (α = 0.05). No difference was found in the drilling path (p = 0.422). However, the Munce bur had higher dentin wear than the DSP bur (p = 0.011). A positive linear correlation (R2  = 0.859) was found between the factors.

Canal Drying Protocols to Use with Calcium Silicate-based Sealer: Effect on Bond Strength and Adhesive Interface.

INTRODUCTION: The aim of this study was to evaluate the influence on bond strength and interface quality of different canal drying protocols in roots filled with Bio-C Sealer (BCS; Angelus, Londrina, Paraná, Brazil). METHODS: Ninety-six roots of upper canines were prepared with an R50 file (Reciproc; VDW GmbH, Munich, Germany) and irrigated with 2.5% sodium hypochlorite and 17% EDTA under ultrasonic agitation. Roots were divided according to the drying protocol as follows: dry, the White Mac tip (Ultradent, Indaiatuba, SP, Brazil) for 5 seconds followed by aspiration with a capillary tip for 5 seconds and paper points; slightly moist, the White Mac tip followed by capillary aspiration without paper points; wet, the White Mac tip followed by a single paper point. The roots were filled with BCS or AH Plus (AHP; Dentsply Maillefer, Ballaigues, Switzerland) (n = 16) and sectioned for the push-out test after 3 months. Failure modes were assessed, and the interface morphology was analyzed under scanning electron microscopy. After 6 months, the other half of the roots were evaluated. Data were analyzed by analysis of variance/Tukey test at 5%. The chi-square test was used in the failure analysis and the Kruskal-Wallis/Dwass-Steel-Critchlow-Fligner for interface analysis. RESULTS: The AHP-filled roots had the highest bond strength when the canal was dried (P < .05). No difference was found for periods (P > .05). For BCS, the highest bond strength was found in the slightly moist canals (P < .05). A predominance of adhesive failures was observed. The dried canals filled with AHP had the highest percentage of good adaptation, whereas BCS had no difference. CONCLUSIONS: The best drying protocol for AHP is using the White Mac tip followed by capillary tip aspiration and paper points until complete dryness, and for BCS, it is using the White Mac tip followed by capillary aspiration without paper points.

Comparison of the methods of disinfection/sterilization of extracted human roots for research purposes.

BACKGROUND: Extracted human teeth are used to simulate dental procedures and are essential for practical education and research studies. OBJECTIVES: The aim of this study was to evaluate the efficacy of different sterilization methods for extracted human roots and to assess the effects of these methods on dentin microhardness. MATERIAL AND METHODS: The crowns of 40 mandibular incisors were removed. The roots were sectioned at 10 mm and divided into 4 groups (n = 10 per group): G1 - no sterilization (control); G2 - microwave radiation (650 W, 5 min); G3 - ethylene oxide (288°C, 3 h); and G4 - autoclave (121°C, 15 min). The roots were immersed in brain heart infusion (BHI) and incubated at 37°C in variable oxygen atmospheres. After 14 days, the samples were assessed for turbidity. Three slices were obtained from each root, and indentations were made at 30, 60 and 120 µm from the root canal lumen. The microbiological data was analyzed with the Kruskal-Wallis test and Dunn's post-hoc test. Microhardness was evaluated by means of the twoway analysis of variance (ANOVA) and Tukey's test (p < 0.05). RESULTS: The roots submitted to autoclaving were 100% sterile, which differed from the other methods (p < 0.05); the control specimens had 0% sterility. For microhardness, significant differences were found between the methods, particularly for the apical third (68.06 ±12.50) (p < 0.05). CONCLUSIONS: Although all the evaluated techniques reduced dentin microhardness, autoclaving should be used as the most reliable method of sterilization of extracted dental roots.