RESUMO
Metal-organic frameworks (MOFs)1-3 are known for their specific interactions with gas molecules4,5; this, combined with their rich and ordered porosity, makes them promising candidates for the photocatalytic conversion of gas molecules to useful products6. However, attempts to use MOFs or MOF-based composites for CO2 photoreduction6-13 usually result in far lower CO2 conversion efficiency than that obtained from state-of-the-art solid-state or molecular catalysts14-18, even when facilitated by sacrificial reagents. Here we create 'molecular compartments' inside MOF crystals by growing TiO2 inside different pores of a chromium terephthalate-based MOF (MIL-101) and its derivatives. This allows for synergy between the light-absorbing/electron-generating TiO2 units and the catalytic metal clusters in the backbones of MOFs, and therefore facilitates photocatalytic CO2 reduction, concurrent with production of O2. An apparent quantum efficiency for CO2 photoreduction of 11.3 per cent at a wavelength of 350 nanometres is observed in a composite that consists of 42 per cent TiO2 in a MIL-101 derivative, namely, 42%-TiO2-in-MIL-101-Cr-NO2. TiO2 units in one type of compartment in this composite are estimated to be 44 times more active than those in the other type, underlining the role of precise positioning of TiO2 in this system.
RESUMO
An efficient broadband responsive two-dimensional (2D) heterometallic Zn-/Co-porphyrin conjugated polymer (ZnCoP-F CP) with its Co-porphyrin bridging unit bearing two perfluorophenyls is coupled with 2.0 wt% Pt-loaded graphite carbon nitride (PCN) to fabricate a novel 2D/2D nanocomposite (ZnCoP-F/PCN). The resultant ZnCoP-F/PCN composite with an optimal mass ratio exhibits broadband (UV-vis-NIR) responsive H2evolution reaction (HER) activity up to 432µmol h-1, 5.2 and 2.8 times higher than that of the ZnCoP-F CP (83µmol h-1) and PCN (151µmol h-1) alone, respectively. Furthermore, the ZnCoP-F/PCN displays excellent apparent quantum yields (AQY) of 18.2%, 18.3%, 17.6%, 16.5%, 13.9%, 8.7%, 5.1%, 4.3%, 1.9%, 0.95% and 0.62% at 350, 380, 420, 450, 500, 550, 600, 700, 785, 850 and 950 nm, which are also higher than that of ZnCoP-F CP illuminated at the respective monochromatic light. The enhanced broadband responsive HER performance of ZnCoP-F/PCN can be attributed to the easily assembled ZnCoP-F CP and PCN nanosheets through strongπ-πstacking interaction, which can facilitate the fast charge transfer from ZnCoP-F CP to PCN for HER. This work opens a new pathway to fabricate porphyrin polymer-based nanocomposite for more efficiently converting solar radiation and water into H2.
RESUMO
Porphyrin and phthalocyanine complexes bearing single-atom catalytic sites (M-N4 ) have been explored as promising electrocatalysts for CO2 reduction reaction (CO2 RR), whose activity can be improved by regulating the ligands and/or the metal centers. Moreover, their photosensitive features also provide the possibility for highly efficient photoelectrocatalytic CO2 RR. Herein, a novel N'NN'-pincer-ligand (N3 )-coupled cobalt porphyrin (CoPor-N3 ) polymer is developed for realizing efficient (photo)electrocatalytic CO2 RR. The unraveled electronic structure and (photo)electrocatalytic features suggest that a synergistic effect between the electron-rich N3 ligands and the Co-N4 single-atom sites in the CoPor-N3 polymer results in the Co centers attaining more electrons, which is beneficial to facilitating the electron transfer to CO2 for the activation and reduction processes. As expected, the resultant CoPor-N3 polymer delivers a good long-term durability and high CO faradaic efficiency (96%) at an ultralow overpotential (0.39 V), which outperforms the CoPor alone and most porphyrin-/phthalocyanine-based electrocatalysts reported so far. Moreover, the photosensitivity of CoPor units can further reduce the overpotential to 0.34 V with a CO faradaic efficiency over 90% under light illumination. The present findings offer a new approach to constructing porphyrin-based photosensitive electrocatalysts with high-efficiency photoelectrocatalytic CO2 RR.
RESUMO
The solar-driven CO2 reduction reaction (CO2RR) for producing chemical fuels is considered to be a promising approach to dealing with the growing energy crisis and greenhouse effect. Herein, novel Ag/MnOx dual-cocatalyst-decorated brookite titania (BT) nanoparticles with remarkably boosted photocatalytic CO2RR performance are prepared through a facile photodeposition method. The resultant xAg-BT-yMn composite with optimal cocatalyst content delivers amazing CO/CH4 yields of 31.70/129.98 µmol g-1 with an overall photoactivity of 1103.28 µmol g-1 h-1, 11.98 times higher than that of the BT nanoparticles alone. Further investigations demonstrate that the dual cocatalysts decorating the BT nanoparticles not only effectively retard the photoinduced charge recombination but also significantly vary the surface chemical feature to promote the adsorption/activation of the reactants (CO2/H2O). In addition, the Ag nanoparticles can broaden the spectral response region, while the MnOx cocatalyst can promote the CH4 product selectivity and the water oxidation reaction. The synergistic effect of Ag/MnOx dual cocatalysts on the BT nanoparticles renders a remarkably boosted CO2RR performance, which provides a simple yet general synthesis strategy for brookite titania-based photocatalysts with high-performance solar-driven CO2 conversion.
RESUMO
A new kind of metallic Cu-loaded brookite TiO2 composite, in which Cu nanoclusters with a small size of 1-3â nm are decorated on brookite TiO2 quasi nanocube (BTN) surfaces (hereafter referred to as Cu-BTN), is synthesized via a one-pot hydrothermal process and then used as photocatalyst for CO2 reduction. It was found that the decoration of Cu nanoclusters on BTN surfaces can improve the activity and selectivity of CO2 photoreduction to CH4 , and 1.5 % Cu-BTN gives a maximum overall photocatalytic activity (150.9â µmol g-1 h-1 ) for CO/CH4 production, which is ≈11.4 and ≈3.3 times higher than those of pristine BTN (13.2â µmol g-1 h-1 ) and Ag-BTN (45.2â µmol g-1 h-1 ). Moreover, the resultant Cu-BTN products can promote the selective generation of CH4 as compared to CO due to the number of surface oxygen vacancies and the CO2 /H2 O adsorption behavior, which differs from that of the pristine BTN. The present results demonstrate that brookite TiO2 would be a potential effective photocatalyst for CO2 photoreduction, and that Cu nanoclusters can act as an inexpensive and efficient co-catalyst alternative to the commonly used noble metals to improve the photoactivity and selectivity for CO2 reduction to CH4 .
RESUMO
A series of carbon-coated Ni (Ni@C)-Cd0.8Zn0.2S nanocomposites were fabricated via a facile hydrothermal process using pre-prepared Ni@C as a starting material. The obtained products were characterized by X-ray diffraction, UV-Vis diffuse reflectance absorption spectroscopy, X-ray photoelectron spectroscopy and electron microscopy. It was found that the introduction of Ni@C nanoparticles can improve both the visible light-induced photocatalytic H2 production activity and stability of the Cd0.8Zn0.2S solid solution, and the Ni nanoparticles encapsulated by several graphite-like carbon layers show high chemical and thermal stability. Among those products with various Ni@C contents, the 5 wt% Ni@C-Cd0.8Zn0.2S nanocomposite exhibits the maximum photoactivity (969.5 µmol h(-1)) for H2 production, which is â¼3.10 times higher than that (312.6 µmol h(-1)) of pristine Cd0.8Zn0.2S. This significant enhancement in the photoactivity by loading Ni@C nanoparticles can be attributed to the metallic Ni in the Ni@C acting as a co-catalyst, while the graphite-like carbon shells acting as the Cd0.8Zn0.2S nanoparticles' support and electron acceptor, which causes an effective photogenerated carrier separation in space and an improvement in the photoactivity and stability for H2 production. The present findings demonstrate a cost reduction strategy by using a non-noble metal co-catalyst for efficient and stable light-to-hydrogen energy conversion.
RESUMO
We firstly demonstrate the opposite photocatalytic activity orders of low-index facets of anatase TiO2 in the liquid phase for rhodamine B (RhB) photocatalytic degradation and in the gaseous phase for the photoreduction of CO2 to CH4. The photocatalytic activity order in the liquid phase for RhB photocatalytic degradation is revealed as {001} > {101} > {010}, whereas the photocatalytic activity order {010} > {101} > {001} is found in the gaseous phase for the photoreduction of CO2 to CH4. The atomic arrangement of the different facets, UV-vis diffuse reflectance spectra, photoluminescence spectra and attenuated total reflectance Fourier transform infrared spectroscopy analysis show that the photoactivity order in the gas phase for the photoreduction of CO2 to CH4 mainly depends on the CO2 molecule adsorption properties on the different exposed facets, and the separation efficiency of the photo-generated carriers determines the photoactivity order for the dye degradation reaction in the liquid phase. These findings also provide a new direction to design efficient photocatalysts and the tuning of their photoreactivity for environmental and energy applications.
RESUMO
Zinc phthalocyanine (ZnPc) derivatives with asymmetric (Zn-tri-PcNc-2) or symmetric (Zn-tetrad-Nc) structure, which possess wide spectral response in the visible/near-IR light region, are synthesized and utilized as a sensitizer of graphitic carbon nitride (g-C3N4) with 0.5 wt% Pt-loading for photocatalytic H2 production. The experimental results indicate that Zn-tri-PcNc-2 exhibits much better photosensitization on g-C3N4 than Zn-tetrad-Nc under visible/near-IR light although Zn-tetrad-Nc possesses wider and stronger optical absorption property than Zn-tri-PcNc-2. Zn-tri-PcNc-2-Pt/g-C3N4 exhibits an average H2 production rate of 132 µmol h(-1), which is much better than that (26.1 µmol h(-1)) of Zn-tetrad-Nc-Pt/g-C3N4 under visible-light (λ ≥ 500 nm) irradiation. Moreover, Zn-tri-PcNc-2-Pt/g-C3N4 also shows much higher apparent quantum yield (AQY) than Zn-tetrad-Nc-Pt/g-C3N4 under red/near-IR light irradiation. Especially, Zn-tri-PcNc-2-Pt/g-C3N4 exhibits impressively higher AQY (1.07%) than that (0.22%) of the Zn-tetrad-Nc-Pt/g-C3N4 under 700 nm monochromatic light irradiation. The much better photoactivity of Zn-tri-PcNc-2-Pt/g-C3N4 than Zn-tetrad-Nc-Pt/g-C3N4 is caused by the asymmetric structure of Zn-tri-PcNc-2, which can result in the electronic orbital directionality of its excited state, much faster photogenerated electron transfer to g-C3N4, and higher red/near-IR light utilization efficiency as compared to Zn-tetrad-Nc-Pt/g-C3N4. The present results provide an important insight into the effects of molecular structure and optical absorption property of phthalocyanine derivatives on the photoactivity of the dye-sensitized semiconductor, and also guide us to further improve the solar energy conversion efficiency by optimizing the molecular structure and effectively utilizing the visible/near-IR light of sunlight.
RESUMO
Zirconium-based metal-organic frameworks (Zr-MOFs) have been extensively studied due to their very rich structural chemistry. The combination of nearly unlimited carboxylic acid-based linkers and Zr6 clusters with multiple connectivities has led to diverse structures and specific properties of resultant Zr-MOFs. Herein, we demonstrate the successful use of reticular chemistry to construct two novel Zr-MOFs, HIAM-4040 and HIAM-4040-OH, with zfu topology. Based on a thorough structural analysis of (4,4)-connected lvt-type Zr-tetracarboxylate frameworks and a judicious linker design, we have obtained the first example of a Zr-pentacarboxylate framework featuring unprecedented 5-connected organic linkers and 5-connected Zr6 clusters. Compared with HIAM-4040, a larger Stokes shift is achieved in HIAM-4040-OH via hydroxyl group induced excited-state intramolecular proton transfer (ESIPT). HIAM-4040-OH exhibits high chemical and thermal stability and is used for HClO detection in aqueous solution with excellent sensitivity and selectivity.
RESUMO
BACKGROUND: Little is known about the role of vitamin D receptor polymorphisms and their interaction with vitamin D status in hepatocellular carcinoma (HCC) prognosis. METHODS: We evaluated the association of TaqI, BsmI, Cdx-2, and ApaI polymorphisms, individually and in combination, with liver cancer-specific (LCSS) and overall survival (OS) among 967 patients with newly diagnosed HCC. Subsequently, we examined whether these polymorphisms modified the association between serum bioavailable 25-hydroxyvitamin D (25OHD) concentrations and survival. Cox proportional hazard models were used to calculate hazard ratios (HRs) and 95% confidence intervals (CIs). RESULTS: During a median follow-up of 1017 days, 393 deaths occurred, with 360 attributed to HCC. Having TaqI G allele (HRper allele = 1.30, 95% CI = 1.08 to 1.57) or BsmI T allele (HRper allele = 1.41, 95% CI = 1.01 to 1.99) was associated with worse LCSS. Carrying increasing numbers of protective alleles was associated with superior LCSS (HR6-8 vs 0-3 = 0.52, 95% CI = 0.34 to 0.80). The inverse association of bioavailable 25OHD with LCSS was only significant in patients with TaqI AA (HRQuartile 4 vs Quartile 1 = 0.63, 95% CI = 0.44 to 0.92), BsmI CC (HRQuartile 4 vs Quartile 1 = 0.62, 95% CI = 0.44 to 0.88), and 6 to 8 protective alleles (HRQuartile 4 vs Quartile 1 = 0.45, 95% CI = 0.23 to 0.87). Similar associations were observed for OS. CONCLUSIONS: Patients carrying wild-type TaqI, BsmI, or more protective alleles had improved survival and might benefit from optimizing bioavailable 25OHD status.
RESUMO
Accurately regulating the microenvironment around active sites is an important approach for boosting the overall water splitting performance of bifunctional electrocatalysts, which can drive both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) in the same electrolyte. Herein, pseudo-pyridine-substituted Ni(II)-porphyrins (o-NiTPyP, m-NiTPyP, and p-NiTPyP) with pseudo-pyridine N-atoms located at the ortho-, meta-, or para-position are prepared and used as model catalysts for alkaline water splitting. Experimental and theoretical results reveal that the pseudo-pyridine N-atom positions can regulate the microenvironment around the active sites and the adsorption free energy of H-donating substances by affecting the H-bonding interaction and the NNiN bond angles of active sites, and thus those pseudo-pyridine-substituted Ni(II)-porphyrins deliver better electrocatalytic activity than the Ni(II)-tetraphenylporphyrin (NiTPP) without pseudo-pyridine N-atoms. Among them, m-NiTPyP on carbon nanotubes delivers the lowest overpotentials of 267 and 138 mV at 10 mA cm-2 for the OER and HER, respectively. Specifically, m-NiTPyP as bifunctional electrocatalyst in an alkaline electrolyzer requires only 1.62 V to drive efficient overall water splitting at 10 mA cm-2 while remaining durable. This work proposes a new H-bond-regulating approach of the microenvironment of electrocatalysts for effectively boosting the overall water splitting activity and deeply understanding its related mechanism.
RESUMO
Highly efficient, visible light induced photocatalytic H(2) production was achieved over a TiO(2) system sensitized by binuclear Ru(II) bipyridyl (bpy) complex [Ru(2)(bpy)(4)(BL)](ClO(4))(2) (BL = bridging ligand) without Pt loading, which is almost unaffected by pH in aqueous solution in the wide range from pHâ 5.00 to 10.50, although the dye molecules can only be loosely attached to TiO(2) due to the absence of terminal carboxyl groups. The photocatalyst shows remarkable long-term stability and reproducibility of H(2) evolution even after exchanging the aqueous triethanolamine solution. The amount of H(2) evolved over 100â mg of photocatalyst in 27â h of irradiation corresponds to a turnover number of about 75,340, and the apparent quantum yields are estimated to be 16.8 and 7.3 % under 420 and 475â nm monochromatic light irradiation, respectively. A comparative study shows that the loosely attached dye [Ru(2)(bpy)(4)(BL)](ClO(4))(2) has higher photosensitization efficiency than tightly linked dyes with terminal carboxyl groups, such as [Ru(2)(dcbpy)(4)(BL)](ClO(4))(2) and N719. It can be rationalized by their different coordination, physicochemical, electron-injection, and back-transfer properties.
RESUMO
Porous graphitic carbon nitride (g-C(3)N(4)) was prepared by a simple pyrolysis of urea, and then a g-C(3)N(4)-Pt-TiO(2) nanocomposite was fabricated via a facile chemical adsorption followed by a calcination process. The obtained products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, UV-vis diffuse reflectance absorption spectra, and electron microscopy. It is found that the visible-light-induced photocatalytic hydrogen evolution rate can be remarkably enhanced by coupling TiO(2) with the above g-C(3)N(4), and the g-C(3)N(4)-Pt-TiO(2) composite with a mass ratio of 70 : 30 has the maximum photoactivity and excellent photostability for hydrogen production under visible-light irradiation, and the stable photocurrent of g-C(3)N(4)-TiO(2) is about 1.5 times higher than that of the bare g-C(3)N(4). The above experimental results show that the photogenerated electrons of g-C(3)N(4) can directionally migrate to Pt-TiO(2) due to the close interfacial connections and the synergistic effect existing between Pt-TiO(2) and g-C(3)N(4) where photogenerated electrons and holes are efficiently separated in space, which is beneficial for retarding the charge recombination and improving the photoactivity.
RESUMO
Black BiOCl with oxygen vacancies was prepared by UV light irradiation with Ar blowing. The as-prepared black BiOCl sample showed 20 times higher visible light photocatalytic activity than white BiOCl for RhB degradation. The trapping experiment showed that the superoxide radical (O(2)(â¢-)) and holes (h(+)) were the main active species in aqueous solution under visible light irradiation.
RESUMO
Covalent organic frameworks (COFs) have been applied as potential electrocatalysts for CO2 reduction reaction (CO2 RR) due to their adjustable architecture and porous feature. Herein, tetraanhydrides of 2,3,9,10,16,17,23,24-octacarboxyphthalocyanine cobalt(II) (CoTAPc) are used as nodes to couple with 5,15-di(4-aminophenyl)-10,20-diphenylporphyrin (DAPor) or 5,15,10,20-tetrayl(4-aminophenyl)porphyrin (TAPor) via imidization reaction to fabricate novel coupled phthalocyanine-porphyrin Type 1:2 (CoPc-2H2 Por) or Type 1:1 (CoPc-H2 Por) COFs. Electrocatalytic CO2 RR experiments show that both Type 1:2 and Type 1:1 COFs exhibit the maximum Faraday efficiency over 90% with high stability, while the Type 1:2 COF (CoPc-2H2 Por) delivers lower overpotential, higher current density, and CO selectivity than Type 1:1 COF (CoPc-H2 Por) and CoPc monomer. Theoretical and experimental results reveal that the better CO2 RR activity of CoPc-2H2 Por than CoPc-H2 Por can be attributed to its larger pore size and conjugate structure, which then cause more efficient electron transfer, adsorption/activation of CO2 , faster mass transfer, and reaction kinetics. This work provides a new idea in the structural design of COF-based electrocatalyst for efficient CO2 RR.
RESUMO
Reduced graphene oxide (RGO)-cadmium sulfide (CdS) nanocomposites were successfully prepared by a one-pot solvothermal process without pretreatment of graphene oxide (GO) and a precipitation process, in which GO needs to be pre-reduced by hydrazine. The as-obtained RGO-CdS nanocomposites were used as photocatalysts for hydrogen production under visible light irradiation, and it was found that the product derived from the one-pot solvothermal process showed much better photoactivity than that from the precipitation method.
RESUMO
The photocatalytic degradation of a commercial methyl parathion (MP) under UV irradiation was investigated in aqueous suspension containing lanthanum-doped mesoporous TiO2 nanoparticles (La/m-TiO2) as photocatalyst. The rate of photodecomposition of MP was measured using UV-Vis spectrophotometry, and its mineralization was followed using ion chromatography (IC). The identification of possible intermediate products was carried out using several powerful analytical techniques such as gas chromatography-pulsed flame photometric detector (GC-PFPD) and high performance liquid chromatography-mass spectroscopy (HPLC-MS). Under our conditions, complete disappearance of 20 mg/L of MP occurred within 2 h of illumination, whereas complete mineralization of MP was not achieved through IC analysis. There was a single intermediate product found in the research, which was identified to be methyl paraoxon, owing to the substitution of S by the O atom in the MP molecule. Based on the experimental facts, it is concluded that MP was mainly attacked not by OH radicals but photo-generated holes (h+), resulting from the good adsorption of MP on the catalyst surfaces due to the enhanced adsorption by La doping.
Assuntos
Lantânio/química , Metil Paration/química , Metil Paration/efeitos da radiação , Nanopartículas/química , Titânio/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/efeitos da radiação , Catálise , Lantânio/efeitos da radiação , Metil Paration/isolamento & purificação , Nanopartículas/efeitos da radiação , Fotoquímica/métodos , Suspensões/química , Suspensões/efeitos da radiação , Titânio/efeitos da radiação , Poluentes Químicos da Água/isolamento & purificação , Purificação da Água/métodosRESUMO
The title compound, C(22)H(16)N(2)O(4), was obtained unintentionally as the product of an attempted synthesis of a new phthalocyanine. The dihedral angles formed by the central benzene ring with the aromatic rings of the meth-oxy-phen-oxy groups are 85.39â (5) and 64.19â (5)°.
RESUMO
In the title compound, C(11)H(12)O(2)S, the C and S atoms of the central thio-phene and the methyl groups, and the two carbonyl groups of the cyclo-hepta-nedione are almost coplanar [maximum deviation from the mean plane = 0.221â (2)â Å]. The packing is stabilized by π-π inter-actions between the conjugated thio-phenes, the shortest centroid-centroid distance between thio-phene rings being 3.9759â (10)â Å.