Phononic Crystal Made of Silicon Ridges on a Membrane for Liquid Sensing.

We propose the design of a phononic crystal to sense the acoustic properties of a liquid that is constituted by an array of silicon ridges on a membrane. In contrast to other concepts, the ridges are immersed in the liquid. The introduction of a suitable cavity in the periodic array gives rise to a confined defect mode with high localization in the cavity region and strong solid-liquid interaction, which make it sensitive to the acoustic properties of the liquid. By using a finite element method simulation, we theoretically study the transmission and cavity excitation of an incident flexural wave of the membrane. The observation of the vibrations of this mode can be achieved either outside the area of the phononic crystal or just above the cavity. We discuss the existence of the resonant modes, as well as its quality factor and sensitivity to liquid properties as a function of the geometrical parameters. The performance of the proposed sensor has then been tested to detect the variation in NaI concentration in a NaI-water mixture.

Physics of surface vibrational resonances: pillared phononic crystals, metamaterials, and metasurfaces.

The introduction of engineered resonance phenomena on surfaces has opened a new frontier in surface science and technology. Pillared phononic crystals, metamaterials, and metasurfaces are an emerging class of artificial structured media, featuring surfaces that consist of pillars-or branching substructures-standing on a plate or a substrate. A pillared phononic crystal exhibits Bragg band gaps, while a pillared metamaterial may feature both Bragg band gaps and local resonance hybridization band gaps. These two band-gap phenomena, along with other unique wave dispersion characteristics, have been exploited for a variety of applications spanning a range of length scales and covering multiple disciplines in applied physics and engineering, particularly in elastodynamics and acoustics. The intrinsic placement of pillars on a semi-infinite surface-yielding a metasurface-has similarly provided new avenues for the control and manipulation of wave propagation. Classical waves are admitted in pillared media, including Lamb waves in plates and Rayleigh and Love waves along the surfaces of substrates, ranging in frequency from hertz to several gigahertz. With the presence of the pillars, these waves couple with surface resonances richly creating new phenomena and properties in the subwavelength regime and in some applications at higher frequencies as well. At the nanoscale, it was shown that atomic-scale resonances-stemming from nanopillars-alter the fundamental nature of conductive thermal transport by reducing the group velocities and generating mode localizations across the entire spectrum of the constituent material well into the terahertz regime. In this article, we first overview the history and development of pillared materials, then provide a detailed synopsis of a selection of key research topics that involve the utilization of pillars or similar branching substructures in different contexts. Finally, we conclude by providing a short summary and some perspectives on the state of the field and its promise for further future development.

Spatiotemporal Imaging of the Acoustic Field Emitted by a Single Copper Nanowire.

The monochromatic and geometrically anisotropic acoustic field generated by 400 and 120 nm diameter copper nanowires simply dropped on a 10 µm silicon membrane is investigated in transmission using three-dimensional time-resolved femtosecond pump-probe experiments. Two pump-probe time-resolved experiments are carried out at the same time on both sides of the silicon substrate. In reflection, the first radial breathing mode of the nanowire is excited and detected. In transmission, the longitudinal and shear waves are observed. The longitudinal signal is followed by a monochromatic component associated with the relaxation of the nanowire's first radial breathing mode. Finite difference time domain (FDTD) simulations are performed and accurately reproduce the diffracted field. A shape anisotropy resulting from the large aspect ratio of the nanowire is detected in the acoustic field. The orientation of the underlying nanowires is thus acoustically deduced.

Simultaneous bandgaps in LiNbO3 phoxonic crystal slab.

We study simultaneous photonic and phononic crystal slabs created in Z-cut lithium niobate membranes. Bandgaps for guided waves are identified using the three-dimensional finite element method (FEM). Three lattices are considered: the square, the hexagonal, and the honeycomb lattices. We investigate the evolution of band gaps as a function of geometrical parameters such as hole radius and membrane thickness. We show the existence of dual photonic and phononic bandgaps in the triangular lattice for suitable geometrical parameters and specific modal symmetries for both the elastic and the electromagnetic fields.

Phonons in slow motion: dispersion relations in ultrathin Si membranes.

We report the changes in dispersion relations of hypersonic acoustic phonons in free-standing silicon membranes as thin as ∼8 nm. We observe a reduction of the phase and group velocities of the fundamental flexural mode by more than 1 order of magnitude compared to bulk values. The modification of the dispersion relation in nanostructures has important consequences for noise control in nano- and microelectromechanical systems (MEMS/NEMS) as well as opto-mechanical devices.

Theoretical Study of Gold Nanoparticles Randomly Dispersed on a Dielectric/Gold Substrate.

We theoretically study random arrangements of cylindrical gold nanoparticles (NPs) deposited on a dielectric/gold substrate. We use two methods, namely the Finite Element Method (FEM) and the Coupled Dipole Approximation (CDA) method. The FEM is increasingly used to analyze the optical properties of NPs, but calculations for arrangements containing a large number of NPs have a high computational cost. On the contrary, the CDA has the advantage to drastically reduce the computation time and the memory demand compared to the FEM. Nevertheless, as the CDA involves modeling each NP as a single electric dipole through the polarizability tensor of a spheroidal-shaped NP, it may be an insufficiently accurate method. Therefore, the main purpose of this article is to verify the validity of using the CDA in order to analyze such a kind of nanosystems. Finally, we capitalize on this methodology to draw some tendencies between statistics of NPs' distributions and the plasmonic properties.

Coverage-dependent adsorption geometry of octithiophene on Au(111).

The adsorption behavior of α-octithiophene (8T) on the Au(111) surface as a function of 8T coverage has been studied with low-temperature scanning tunneling microscopy, high resolution electron energy loss spectroscopy as well as with angle-resolved two-photon photoemission and ultraviolet photoemission spectroscopy. In the sub-monolayer regime 8T adopts a flat-lying adsorption geometry. Upon reaching the monolayer coverage the orientation of 8T molecules changes towards a tilted configuration, with the long molecular axis parallel to the surface plane, facilitating attractive intermolecular π-π-interactions. The photoemission intensity from the highest occupied molecular orbitals (HOMO and HOMO - 1) possesses a strong dependence on the adsorption geometry due to the direction of the involved transition dipole moment for the respective photoemission process. The change in molecular orientation as a function of coverage in the first molecular layer mirrors the delicate balance between intermolecular and molecule/substrate interactions. Fine tuning of these interactions opens up the possibility to control the molecular structure and accordingly the desirable functionality.

Simultaneous guidance of slow photons and slow acoustic phonons in silicon phoxonic crystal slabs.

We demonstrate theoretically that photons and acoustic phonons can be simultaneously guided and slowed down in specially designed nanostructures. Phoxonic crystal waveguides presenting simultaneous phononic and photonic band gaps were designed in perforated silicon membranes that can be conveniently obtained using silicon-on-insulator technology. Geometrical parameters for simultaneous photonic and phononic band gaps were first chosen for optical wavelengths around 1550 nm, based on the finite element analysis of a perfect phoxonic crystal of circular holes. A plain core waveguide was then defined, and simultaneous slow light and elastic guided modes were identified for some waveguide width. Joint guidance of light and elastic waves is predicted with group velocities as low as c/25 and 180 m/s, respectively.

Plasmonic properties of silver nanostructures coated with an amorphous silicon-carbon alloy and their applications for sensitive sensing of DNA hybridization.

The use of an amorphous silicon-carbon alloy overcoating on silver nanostructures in a localized surface plasmon resonance (LSPR) sensing platform allows for decreasing the detection limit by an order of magnitude as compared to sensors based on gold nanostructures deposited on glass. In addition, silver based multilayer structures show a distinct plasmonic behaviour as compared to gold based nanostructures, which provides the sensor with an increased short-range sensitivity and a decreased long-range sensitivity.

Effects of rituximab therapy on quality of life in patients with primary Sjögren's syndrome.

OBJECTIVES: To assess the efficacy of the anti-CD20 antibody rituximab in improving physical function and health-related quality of life (HRQoL) in patients with active primary Sjögren's syndrome (pSS), as well as the duration and sources of HRQoL improvements. METHODS: Sixteen patients with pSS received rituximab infusions (375 mg/m2) at weeks 0 and 1 and were followed up for 36 weeks. All patients fulfilled 2002 American-European Consensus Group criteria for pSS and had active disease defined as scores >50 mm on two of four 100-mm visual analogue scales (VAS) evaluating global disease activity, fatigue, pain, and dryness. Standardised evaluations including the Short Form 36 Health Survey (SF-36) were conducted. SF-36 score changes from baseline to weeks 12, 24, and 36 were assessed. RESULTS: Baseline mean SF-36 scores were considerably decreased, compared to the general same-age population. Role-physical (14.1 ± 27.4), role-emotional (12.5 ± 29.9), vitality (26.2 ± 14.3), and general health (32.6 ± 11.2) were the dimensions with the worst scores. Twelve weeks after rituximab, the mental component summary score was improved in 15 patients (mean improvement, 31.2 ± 36.4, p=0.001) and the physical component summary score in 14 patients (mean improvement, 16.9 ± 26.2, p=0.049). Further improvements occurred from week 12 to week 24, and most of the gains were sustained at week 36. Improvements in the physical and mental component summary scores failed to correlate with improvements in the VAS scores. CONCLUSIONS: Substantial alterations in HRQoL were noted in patients with pSS. Rituximab infusions without corticosteroid therapy produced meaningful improvements in HRQoL. Controlled studies of rituximab are needed.

Elastic stubbed metamaterial plate with torsional resonances.

We report on a new mechanism involving the torsional resonance of stubs to achieve the negative effective shear modulus of an elastic metamaterial plate. Combined with a mechanism to create a negative mass density, we develop a general method to set up and enlarge a shear-horizontal-polarized double-negative branch in the elastic metamaterial plate with stubs on both sides. We explore the capabilities of this structure for polarization filtering, mode conversion and abnormal refraction. It is shown that, this metamaterial plate behaves divergently against the polarization of incident waves propagating along ΓX direction in a square lattice crystal: it behaves as a double-negative system for zero-order shear horizontal (SH0) wave but as a single-negative one for zero-order antisymmetric (A0) or symmetric (S0) Lamb waves. Mode conversion is achieved when the propagation deviates from ΓX direction. Moreover, we observe abnormal refracted patterns with both positive and negative refraction occurring at the interface between a prism-shaped supercell and the surrounding plate. Furthermore, we propose a chiral pillar to efficiently couple the torsional resonance with an incident A0 Lamb wave.

Impact of SiO2 Particles in Polyethylene Textile Membrane for Indoor Personal Heating.

Keeping the human body in a thermal comfort state inside a room has become a challenge in recent years. While the most common strategy is to heat buildings, it requires a lot of energy. Reducing this energy consumption will have positive impacts, both economically and environmentally. We propose here to act directly on the personal thermal heating of the human body, by modulating the absorption and transmission properties of a synthetic polymer membrane in the mid-infrared (MIR). We show numerically that 5% SiO2 submicron particles inserted in polyethylene (PE) and nanoporous polyethylene (nanoPE) membranes increase the radiative heating of the membrane, reducing the required ambient temperature of a room by more than 1.1 °C. The proposed membrane can be flexible enough to be easily integrated into conventional textiles.

Polymer photonic crystal membrane for thermo-regulating textile.

We study numerically the absorption and scattering properties of a polymer photonic membrane to thermoregulate the human body microclimate which corresponds to the area between the skin and a textile. We first show that the structuration of the absorbing photonic membrane with air holes leads to a modulation of the optical spectrum in the Mid-Infrared range. Indeed, we show that the membrane is able to modulate the transmission amplitude by 28% in benefit or deficit of both the absorption and reflection. We then studied the thermal balance between the human body and the surrounding environment through the photonic membrane. We found that, compared to a regular membrane, the photonic crystal structure behaves as a heating component that offers the possibility to reduce the temperature of the room up to +1 °C. The membrane is flexible, low cost, 3D-printable, free of metallic particles, and can easily be added to usual textiles.

Visualizing the frontier orbitals of a conformationally adapted metalloporphyrin.

We present a molecular-level study of the geometric and electronic properties of Co(II) tetraphenylporphyrin molecules adsorbed on the Cu(111) surface. A combination of low-temperature scanning tunneling microscopy and near-edge X-ray absorption fine structure observations reveals how the metal substrate induces a conformational adaptation into a distorted saddle-shaped geometry. By scanning tunneling spectroscopy we identified the discrete energy levels of the molecule and mapped their spatial electron-density distributions. These results, along with a simple theoretical description, provide a direct correlation between the shape of frontier molecular orbitals and intramolecular structural features.

Gradient Index Devices for the Full Control of Elastic Waves in Plates.

In this work, we present a method for the design of gradient index devices for elastic waves in plates. The method allows the design of devices to control the three fundamental modes, despite the fact that their dispersion relation is managed by different elastic constants. It is shown that by means of complex graded phononic crystals and thickness variations it is possible to independently design the three refractive indexes of these waves, allowing therefore their simultaneous control. The effective medium theory required for this purpose is presented, and the method is applied to the design of the Luneburg and Maxwell lenses as well as to the design of a flat gradient index lens. Finally, numerical simulations are used to demonstrate the performance of the method in a broadband frequency region.

Tuning and switching the hypersonic phononic properties of elastic impedance contrast nanocomposites.

Anodic aluminum oxide (AAO) containing arrays of aligned cylindrical nanopores infiltrated with polymers is a well-defined model system for the study of hypersound propagation in polymer nanocomposites. Hypersonic phononic properties of AAO/polymer nanocomposites such as phonon localization and anisotropic sound propagation can be tailored by adjusting elastic contrast and density contrast between the components. Changes in density and elastic properties of the component located in the nanopores induced by phase transitions allow reversible modification of the phononic band structure and mode switching. As example in case, the crystallization and melting of poly(vinylidene difluoride) inside AAO was investigated.

Conformational adaptation and selective adatom capturing of tetrapyridyl-porphyrin molecules on a copper (111) surface.

We present a combined low-temperature scanning tunneling microscopy and near-edge X-ray adsorption fine structure study on the interaction of tetrapyridyl-porphyrin (TPyP) molecules with a Cu(111) surface. A novel approach using data from complementary experimental techniques and charge density calculations allows us to determine the adsorption geometry of TPyP on Cu(111). The molecules are centered on "bridge" sites of the substrate lattice and exhibit a strong deformation involving a saddle-shaped macrocycle distortion as well as considerable rotation and tilting of the meso-substituents. We propose a bonding mechanism based on the pyridyl-surface interaction, which mediates the molecular deformation upon adsorption. Accordingly, a functionalization by pyridyl groups opens up pathways to control the anchoring of large organic molecules on metal surfaces and tune their conformational state. Furthermore, we demonstrate that the affinity of the terminal groups for metal centers permits the selective capture of individual iron atoms at low temperature.

Zwitterionic self-assembly of L-methionine nanogratings on the Ag(111) surface.

The engineering of complex architectures from functional molecules on surfaces provides new pathways to control matter at the nanoscale. In this article, we present a combined study addressing the self-assembly of the amino acid L-methionine on Ag(111). Scanning tunneling microscopy data reveal spontaneous ordering in extended molecular chains oriented along high-symmetry substrate directions. At intermediate coverages, regular biomolecular gratings evolve whose periodicity can be tuned at the nanometer scale by varying the methionine surface concentration. Their characteristics and stability were confirmed by helium atomic scattering. X-ray photoemission spectroscopy and high-resolution scanning tunneling microscopy data reveal that the L-methionine chaining is mediated by zwitterionic coupling, accounting for both lateral links and molecular dimerization. This methionine molecular recognition scheme is reminiscent of sheet structures in amino acid crystals and was corroborated by molecular mechanics calculations. Our findings suggest that zwitterionic assembly of amino acids represents a general construction motif to achieve biomolecular nanoarchitectures on surfaces.