Prevalence of metabolic syndrome among Vietnamese adult employees.

BACKGROUND AND AIMS: Metabolic syndrome (MtS) is associated with increased risk of many health disorders, especially cardiovascular diseases. In Vietnam, study examining MtS is meager and especially lacking for the workforce. We estimated the prevalence of MtS and its associated factors among Vietnamese employees. METHODS AND RESULTS: We analyzed secondary data of annual health check of employees of 300 Vietnamese companies from the Vinmec Healthcare System. We used three definitions for MtS: International Diabetes Federation (IDF), National Cholesterol Education Program Adult Treatment Panel III (NCEP ATP III), and NCEP ATP III-Asia. Of 57,997 participants evaluated, 48.5 % were males and 66.2 % were younger than 40 years old. The unadjusted MtS prevalence was 8.4 % (IDF), 10.2 % (NCEP ATP III), and 16.0 % (NCEP ATP III-Asia). The age-sex adjusted prevalence of MtS (NCEP ATP III-Asia) was 21.8 % (95 % confidence interval (CI): 21.4 %, 22.2 %). MtS prevalence increased with age, reached 49.6 % for age ≥60. The aging related increase was more remarkable in females than males (prevalence ratio (PR) (95 % CI) for age ≥60 comparing to age <30 years old in males vs. females was 4.0 (3.6, 4.3) vs. 20.1 (17.7, 22.9)). High blood triglyceride (83.4 %) and abdominal obesity (74.5 %) were the predominant contributors to MtS. CONCLUSION: In this relatively young Vietnamese working population, 16 % had MtS with high triglyceride and abdominal obesity being the predominant contributors. These findings emphasize the need for developing effective high triglyceride and abdominal obesity prevention and control programs to curb the emerging epidemic of metabolic disorders in the workforce.

Multifunctional Polypyrrole-Based Textile Sensors for Integration into Personal Protection Equipment.

Integrated safety sensors for personal protection equipment increasingly attract research activities as there is a high need for workers in delicate situations to be physically monitored in order to avoid accidents. In this work, we present a simple approach to generate thin, homogeneous polypyrrole (PPy) layers on flexible textile polyamide fabrics. PPy layers of 0.5-1 µm were deposited on the fabric, which thus kept its flexibility. The conductive layers are multifunctional and can act as temperature and gas sensors for the detection of corrosive gases such as HCl and NH3. Using three examples of life-threatening environments, we were able to monitor temperature, atmospheric NH3 and HCl within critical ranges, i.e., 100 to 400 ppm for ammonia and 20 to 100 ppm for HCl. In the presence of HCl, a decrease in resistance was observed, while gaseous NH3 led to an increase in resistance. The sensor signal thus allows for distinguishing between these two gases and indicating critical concentrations. The simple and cheap manufacturing of such PPy sensors is of substantial interest for the future design of multifunction functional sensors in protective clothing.

Proportion and number of cancer cases and deaths attributable to behavioral risk factors in Vietnam.

Identifying modifiable risk factors that contribute to cancer is essential in setting up preventive strategies. Therefore, this study aimed to estimate the number and proportion of cancer cases and deaths attributable to five behavior-related risk factors-tobacco smoking, second-hand smoking, alcohol consumption, high body mass index and insufficient physical activity in Vietnam in 2020. Population attributable fractions were calculated for relationships of risk factors and cancer types based on sufficient evidence according to IARC or strong evidence according to WCRF/AICR. Relative risks were retrieved from meta-analyses where possible. Prevalence of risk factors was obtained from the most current available nationally representative population surveys in Vietnam. Cancer cases and deaths were obtained from GLOBOCAN 2020. An estimated 40.5% of all cancer cases in men (39 924 cases) and 7.8% in women (6542 cases) were attributable to these risk factors. The proportions of cancer deaths attributable to these risk factors were 44.0% in men (32 807 cases) and 8.9% in women (4235 cases). Tobacco smoking was the leading cause of cancer cases and deaths in men, followed by alcohol consumption and high BMI. In women, high BMI accounted for the highest proportion of cancer cases and second-hand smoking accounted for the highest proportion of cancer deaths. Lung and upper aerodigestive tract cancer cases and deaths could have been reduced at least by half if these risk factors had been eliminated. To reduce cancer incidence and mortality, preventive actions focusing on tobacco control are likely to have the most significant impact, especially in men.

Towards the Functional Ageing of Electrically Conductive and Sensing Textiles: A Review.

Electronic textiles (e-textiles) have become more and more important in daily life and attracted increased attention of the scientific community over the last decade. This interdisciplinary field of interest ranges from material science, over chemistry, physics, electrical engineering, information technology to textile design. Numerous applications can already be found in sports, safety, healthcare, etc. Throughout the life of service, e-textiles undergo several exposures, e.g., mechanical stress, chemical corrosion, etc., that cause aging and functional losses in the materials. The review provides a broad and critical overview on the functional ageing of electronic textiles on different levels from fibres to fabrics. The main objective is to review possible aging mechanisms and elaborate the effect of aging on (electrical) performances of e-textiles. The review also provides an overview on different laboratory methods for the investigation on accelerated functional ageing. Finally, we try to build a model of cumulative fatigue damage theory for modelling the change of e-textile properties in their lifetime.

Multi-Point Flexible Temperature Sensor Array and Thermoelectric Generator Made from Copper-Coated Textiles.

The integration of electrical functionality into flexible textile structures requires the development of new concepts for flexible conductive material. Conductive and flexible thin films can be generated on non-conductive textile materials by electroless metal deposition. By electroless copper deposition on lyocell-type cellulose fabrics, thin conductive layers with a thickness of approximately 260 nm were prepared. The total copper content of a textile fabric was analyzed to be 147 mg per g of fabric, so that the textile character of the material remains unchanged, which includes, for example, the flexibility and bendability. The flexible material could be used to manufacture a thermoelectric sensor array and generator. This approach enables the formation of a sensor textile with a large number of individual sensors and, at the same time, a reduction in the number of electrical connections, since the conductive textile serves as a common conductive line for all sensors. In combination with aluminum, thermoelectric coefficients of 3-4 µV/K were obtained, which are comparable with copper/aluminum foil and bulk material. Thermoelectric generators, consisting of six junctions using the same material combinations, led to electric output voltages of 0.4 mV for both setups at a temperature difference of 71 K. The results demonstrate the potential of electroless deposition for the production of thin-film-coated flexible textiles, and represent a key technology to achieve the direct integration of electrical sensors and conductors in non-conductive material.

Investigation of Interfacial Diffusion in PA/PP-g-MAH Laminates Using Nanoscale Infrared Spectroscopy.

The characterization of polymer-polymer interfaces is of great interest to understand the diffusion process and chemical interactions in polymeric multiphase systems. This study investigated the formation of the interface layer between polyamide (PA) and polypropylene (PP) and its dependency on the maleic anhydride (MAH) content in PP. New insights with a very high level of details on the formation of the interfacial layer are obtained by employing a special technique of atomic force microscopy (AFM) combined with infrared (IR) for chemical imaging at nanoscale spatial resolution. This enables the determination of the interface thickness and even the observation and visualization of the diffusion gradient across the PA/PP interface layer. Combined with classical investigation methods such as interfacial energy and rheology, the method of nano-IR spectroscopy represents a very powerful tool to obtain more insights and a deeper understanding of the interfacial phenomenon in multiphase polymeric systems.

Multivalent Ions as Reactive Crosslinkers for Biopolymers-A Review.

Many biopolymers exhibit a strong complexing ability for multivalent ions. Often such ions form ionic bridges between the polymer chains. This leads to the formation of ionic cross linked networks and supermolecular structures, thus promoting the modification of the behavior of solid and gel polymer networks. Sorption of biopolymers on fiber surfaces and interfaces increases substantially in the case of multivalent ions, e.g., calcium being available for ionic crosslinking. Through controlled adsorption and ionic crosslinking surface modification of textile fibers with biopolymers can be achieved, thus altering the characteristics at the interface between fiber and surrounding matrices. A brief introduction on the differences deriving from the biopolymers, as their interaction with other compounds, is given. Functional models are presented and specified by several examples from previous and recent studies. The relevance of ionic crosslinks in biopolymers is discussed by means of selected examples of wider use.

Spatial Structure Investigation of Porous Shell Layer Formed by Swelling of PA66 Fibers in CaCl2/H2O/EtOH Mixtures.

This is a continuation of work on interactions between polyamide 66 (PA66) fibers and CaCl2/H2O/EtOH mixtures. It was observed that the mixtures dissolved the fibers, but with or without an intermediate stage of visibly evident swelling depending on the mixture composition. The interaction proceeds via Lewis acid-base complexation between the polymer carbonyl groups and Ca2+ ions and can be interrupted by rinsing the fibers with water. Swollen fibers retained their expanded diameters even after rinsing and exhibited a highly rough surface and increased water retention. The observed effects suggest that such mixtures may be used to increase the surface roughness of PA66 fibers for increasing the interfacial adhesion in composites applications. In this publication, we report the results of further investigations into the spatial structure of cross sections of swollen fibers. Using atomic force microscopy coupled with infrared spectroscopy on the length scale of 100 nm (nanoIR-AFM), we could show, for the first time, the PA66 core-shell structure, where the shell thickness increases with the treatment extent and exhibits a highly porous structure. Thus, the surface roughness observed previously is not limited only to the surface but extends toward the fiber core. The examination also showed no evidence of Ca2+ complexation in the fiber cores, which confirms a near-complete removal of the ions. Additional measurements of the crystallinity with differential scanning calorimetry and attenuated total reflectance Fourier transform infrared spectroscopy showed that the shell exhibits lower crystallinity than the core.

Cancers in Vietnam-Burden and Control Efforts: A Narrative Scoping Review.

Although the burden of cancer is rapidly growing in Vietnam, there was no up-to-date review that describes cancer burden and control in Vietnam throughout the literature. By identifying various risk factors, means of prevention, and methods for early detection, this review seeks to systematically summarize the evidence for the future planning and management of cancer occurrence in Vietnam. Additionally, this report aims to identify improvements which are necessary for the treatment and palliative care of patients with cancer in Vietnam. We employed a hybrid approach including both a scoping review and narrative synthesis for this study. Information was identified, extracted, and charted from various sources, which include international and domestically published studies, in addition to gray literature. Our results illustrate that the burden of cancer in Vietnam has tripled in the past 30 years, and this situation could be partly explained by the growing prevalence of both old and new risk factors. Besides hepatitis B virus, various other important risk factors such as human papilloma virus, tobacco usage, physical inactivity, and improper diets are still not under control in Vietnam. There is presently a lack of national cancer screening programs, and the capacity of cancer care services could not maintain pace with the demands of a rapidly increasing Vietnamese population. Overall, policy frameworks for cancer control in Vietnam are in place, but there is still a lack of proper financing and governing models necessary to support a sustainable program. In conclusion, Cancer and its associated consequences are both persistent and emerging problems in Vietnam, and the results of cancer control programs are limited. A comprehensive and evidence-based approach toward the prevention and treatment of cancer should be the future direction for Vietnam.

Gas Biosensor Arrays Based on Single-Stranded DNA-Functionalized Single-Walled Carbon Nanotubes for the Detection of Volatile Organic Compound Biomarkers Released by Huanglongbing Disease-Infected Citrus Trees.

Volatile organic compounds (VOCs) released by plants are closely associated with plant metabolism and can serve as biomarkers for disease diagnosis. Huanglongbing (HLB), also known as citrus greening or yellow shoot disease, is a lethal threat to the multi-billion-dollar citrus industry. Early detection of HLB is vital for removal of susceptible citrus trees and containment of the disease. Gas sensors are applied to monitor the air quality or toxic gases owing to their low-cost fabrication, smooth operation, and possible miniaturization. Here, we report on the development, characterization, and application of electrical biosensor arrays based on single-walled carbon nanotubes (SWNTs) decorated with single-stranded DNA (ssDNA) for the detection of four VOCs-ethylhexanol, linalool, tetradecene, and phenylacetaldehyde-that serve as secondary biomarkers for detection of infected citrus trees during the asymptomatic stage. SWNTs were noncovalently functionalized with ssDNA using π-π interaction between the nucleotide and sidewall of SWNTs. The resulting ssDNA-SWNT hybrid structure and device properties were investigated using Raman spectroscopy, ultraviolet (UV) spectroscopy, and electrical measurements. To monitor changes in the four VOCs, gas biosensor arrays consisting of bare SWNTs before and after being decorated with different ssDNA were employed to determine the different concentrations of the four VOCs. The data was processed using principal component analysis (PCA) and neural net fitting (NNF).

Engineered islet cell clusters transplanted into subcutaneous space are superior to pancreatic islets in diabetes.

An alternative route for pancreatic islet transplantation is the subcutaneous space; however, inadequate vascularization in the subcutaneous space limits the availability of oxygen and nutrients to the subcutaneously transplanted islets, which leads to the development of a necrotic core in the islets, thereby causing islet dysfunction. Thus, we aimed to prevent the early apoptosis of pancreatic islets after transplantation into subcutaneous space by preparing islet clusters of appropriate size. We prepared fully functional islet cell clusters (ICCs) by using the hanging-drop technique. We optimized the size of ICCs on the basis of viability and functionality after culture in an hypoxic environment. We transplanted ICCs into the subcutaneous space of diabetic mice and evaluated the viability of the islets at the transplantation site. In an hypoxic environment, ICCs exhibited improved viability and functionality compared with control islets. ICCs, upon transplantation into the hypoxic subcutaneous space of diabetic mice, showed better glycemic control compared with control islets. Live/dead imaging of the islets after retrieval from the transplanted area revealed significantly reduced apoptosis in ICCs. Transplantation of ICCs may be an attractive strategy to prevent islet cell apoptosis that results from nonimmune-mediated physiologic stress at the transplantation site.-Pathak, S., Regmi, S., Gupta, B., Pham, T. T., Yong, C. S., Kim, J. O., Yook, S., Kim, J.-R., Park, M. H., Bae, Y. K., Jeong, J.-H. Engineered islet cell clusters transplanted into subcutaneous space are superior to pancreatic islets in diabetes.

A novel case-control subsampling approach for rapid model exploration of large clustered binary data.

In many settings, an analysis goal is the identification of a factor, or set of factors associated with an event or outcome. Often, these associations are then used for inference and prediction. Unfortunately, in the big data era, the model building and exploration phases of analysis can be time-consuming, especially if constrained by computing power (ie, a typical corporate workstation). To speed up this model development, we propose a novel subsampling scheme to enable rapid model exploration of clustered binary data using flexible yet complex model set-ups (GLMMs with additive smoothing splines). By reframing the binary response prospective cohort study into a case-control-type design, and using our knowledge of sampling fractions, we show one can approximate the model estimates as would be calculated from a full cohort analysis. This idea is extended to derive cluster-specific sampling fractions and thereby incorporate cluster variation into an analysis. Importantly, we demonstrate that previously computationally prohibitive analyses can be conducted in a timely manner on a typical workstation. The approach is applied to analysing risk factors associated with adverse reactions relating to blood donation.

One-Step Pyro-Synthesis of a Nanostructured Mn3 O4 /C Electrode with Long Cycle Stability for Rechargeable Lithium-Ion Batteries.

A nanostructured Mn3 O4 /C electrode was prepared by a one-step polyol-assisted pyro-synthesis without any post-heat treatments. The as-prepared Mn3 O4 /C revealed nanostructured morphology comprised of secondary aggregates formed from carbon-coated primary particles of average diameters ranging between 20 and 40 nm, as evidenced from the electron microscopy studies. The N2 adsorption studies reveal a hierarchical porous feature in the nanostructured electrode. The nanostructured morphology appears to be related to the present rapid combustion strategy. The nanostructured porous Mn3 O4 /C electrode demonstrated impressive electrode properties with reversible capacities of 666 mAh g-1 at a current density of 33 mA g-1 , good capacity retentions (1141 mAh g-1 with 100 % Coulombic efficiencies at the 100th cycle), and rate capabilities (307 and 202 mAh g-1 at 528 and 1056 mA g-1 , respectively) when tested as an anode for lithium-ion battery applications.

Preparation of High-Payload, Prolonged-Release Biodegradable Poly(lactic-co-glycolic acid)-Based Tacrolimus Microspheres Using the Single-Jet Electrospray Method.

Tacrolimus-loaded poly(lactic-co-glycolic acid) microspheres (TAC-PLGA-M) can be administered for the long-term survival of transplanted organs due to their immunosuppressive activity. The purpose of our study was to optimize the parameters of the electrospray method, and to prepare TAC-PLGA-M with a high payload and desirable release properties. TAC-PLGA-M were prepared using the electrospray method. In vitro characterization and evaluation were performed using scanning electron microscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier-transform infrared spectroscopy. Drug-loading efficiency was greater than 80% in all formulations with a maximum loading capacity of 16.81±0.37%. XRD and DSC studies suggested that the drug was incorporated in an amorphous state or was molecularly dispersed in the microspheres. The in vitro release study showed prolonged release patterns. TAC-PLGA-M with enhanced drug loading and prolonged-release patterns were successfully prepared using the electrospray method.

Core-shell strain structure of zeolite microcrystals.

Zeolites are crystalline aluminosilicate minerals featuring a network of 0.3-1.5-nm-wide pores, used in industry as catalysts for hydrocarbon interconversion, ion exchangers, molecular sieves and adsorbents. For improved applications, it is highly useful to study the distribution of internal local strains because they sensitively affect the rates of adsorption and diffusion of guest molecules within zeolites. Here, we report the observation of an unusual triangular deformation field distribution in ZSM-5 zeolites by coherent X-ray diffraction imaging, showing the presence of a strain within the crystal arising from the heterogeneous core-shell structure, which is supported by finite element model calculation and confirmed by fluorescence measurement. The shell is composed of H-ZSM-5 with intrinsic negative thermal expansion whereas the core exhibits a different thermal expansion behaviour due to the presence of organic template residues, which usually remain when the starting materials are insufficiently calcined. Engineering such strain effects could have a major impact on the design of future catalysts.

Natural Fiber Reinforced Shoe Midsoles with Balanced Stiffness/Damping Behavior.

The comfort of walking depends heavily on the shoes used. Consequently, the midsole of shoes is designed in such a way that it can dampen force peaks during walking. This significantly increases the overall wellness during walking. Therefore, the midsole usually consists of rubber-like polymers, such as polyurethane and ethylene-vinyl acetate copolymer. Furthermore, the manufacturing process of these polymers results in a foam-like structure. This further enhances the damping behavior of the material. Nevertheless, it would be desirable to find a cheap and sustainable method to enhance the damping behavior of the shoe midsole. The purpose of this work is to see if hemp fibers, which are part of the polymer matrix material, could improve the stiffness without losing the damping behavior. The mechanical properties of such prepared fiber-reinforced composites were characterized by quasi-static tensile testing and dynamic mechanical analysis. The mechanical properties were examined in relation to the fiber type, weight fraction, and type of polyurethane used. Furthermore, the investigation of the embedding of these fibers in the polymer matrix was conducted through the utilization of optical and electron microscopy.

Planetary Health Diet Index and risk of total and cause-specific mortality in three prospective cohorts.

BACKGROUND: In 2019, the EAT-Lancet Commission proposed a healthy dietary pattern that, along with reductions in food waste and improved agricultural practices, could feed the increasing global population sustainably. We developed a Planetary Health Diet Index (PHDI) to quantify adherence to the EAT-Lancet reference diet. OBJECTIVES: We aimed to assess associations between PHDI and total and cause-specific mortality in 3 prospective cohorts of males and females in the United States. METHODS: We followed 66,692 females from the Nurses' Health Study (1986-2019), 92,438 females from the Nurses' Health Study II (1989-2019), and 47,274 males from the Health Professionals Follow-up Study (1986-2018) who were free of cancer, diabetes, and major cardiovascular diseases at baseline. The PHDI was calculated every 4 y using a semiquantitative food frequency questionnaire. Hazard ratios (HRs) were calculated using multivariable proportional-hazards models. RESULTS: During follow-up, we documented 31,330 deaths among females and 23,206 among males. When comparing the highest with the lowest quintile of PHDI, the pooled multivariable-adjusted HRs were 0.77 [95% confidence interval (CI): 0.75, 0.80] for all-cause mortality (P-trend < 0.0001). The PHDI was associated with lower risk of deaths from cardiovascular diseases (HR: 0.86; 95% CI: 0.81, 0.91), cancer (HR: 0.90; 95% CI: 0.85, 0.95), respiratory diseases (HR: 0.53; 95% CI: 0.48, 0.59), and neurodegenerative diseases (HR: 0.72; 95% CI: 0.67, 0.78). In females, but not males, the PHDI was also significantly associated with a lower risk of deaths from infectious diseases (HR: 0.62; 95% CI: 0.51, 0.76). PHDI scores were also associated inversely with greenhouse gas emissions and other environmental impacts. CONCLUSIONS: In 3 large United States-based prospective cohorts of males and females with up to 34 y of follow-up, a higher PHDI was associated with lower risk of total and cause-specific mortality and environment impacts.

Opioid Therapy for Cancer Pain in Vietnam: Knowledge, Attitudes, and Perceived Barriers Among Health Care Professionals, Policymakers, and Regulators.

PURPOSE: We aimed to assess knowledge, attitudes, and perceived barriers among health care professionals (HCPs), policymakers, and regulators in Vietnam related to opioid therapy for cancer pain. METHODS: We conducted a cross-sectional study in Vietnam from June to August 2022. Participants completed a questionnaire on their demographic characteristics, knowledge and attitudes toward opioid therapy, and barriers to accessing opioids for cancer pain. RESULTS: Two hundred seven HCPs and 15 policymakers/regulators completed the questionnaire. Poor knowledge about opioids in cancer pain was found in 63.3% of HCPs and 80.0% of policymakers/regulators. Poor knowledge was associated with a lack of training in cancer pain management or palliative care (PC; prevalence ratio [PR], 1.14 [95% CI, 1.04 to 1.24]). Negative attitudes toward opioid therapy in cancer pain were held by 64.7% of HCPs and 80.0% of policymakers/regulators. Negative attitudes were associated with the unavailability of oral morphine in the workplace (PR, 1.10 [95% CI, 1.01 to 1.20]). The most common major barriers reported were the absence of national policy on pain management and PC (34.7%), inadequate training in opioid use for cancer pain (33.8%), lockdown of health facilities during the COVID-19 pandemic (32.4%), limited opioid availability in local health facilities (32.4%), and excessively restrictive regulation of opioid dispensing in pharmacies (32.4%). CONCLUSION: This study found a knowledge deficit and negative attitudes toward opioid therapy for cancer pain among HCPs and policymakers/regulators. Improving education and training in opioid therapy is essential. Recognizing major barriers can guide strategies to enhance safe opioid accessibility for cancer pain management in Vietnam.

Improvement of wet rub fastness in continuous dyeing with c.i. Sulphur Black 1 by ultrasonic treatment.

C.I. Sulphur Black 1 is among the most important dyes for cellulose textiles, as this dye offers a maximum colour depth at reasonable costs. In its final form the dye is present as solid pigment, thus limited wet rub fastness can be an issue. Controlled re-oxidation of the leuco form into the oxidised dye pigment and intensive washing and soaping are measures to achieve acceptable wet rub fastness. In this study pad-steam dyeing with C.I. Sulphur Black 1 was used to investigate the effects of an intensified washing process with use of ultrasonification on rub fastness. Ultrasound was applied following to steam fixation of the dye. Introduction of ultrasound into the following process steps was investigated: water seal, warm rinse, oxidation, soaping, cold rinse. Best results in rub fastness were obtained by combination of soaping and ultrasound processing. The high shear rate near to the fibre surface led to a reduction of the thickness of the stagnant diffusion layer and more intense removal of loosely bound dispersed dye. As a result of the treatment an improvement in wet rub fastness of the dyeings was achieved. Duration of 60 - 120 s was found sufficient to remove the major part of surface bound pigments which allows an integration into continuous pad-steam dyeing processing. The results demonstrate that ultrasound washing may lead to improved rub fastness of other dyeings where a pigment is the final form of the dye. The method thus could be extended to vat dyes including indigo, or naphthol dyes.

Polyolefin Blends with Selectively Crosslinked Disperse Phase Based on Silane-Modified Polyethylene.

Polypropylene-based multiphase compositions with a disperse elastomer phase provide superior impact strength. Making this property indifferent to processing steps requires stabilization of the morphology of these materials. Various approaches have been tested over time, each of which shows limitations in terms of performance or applicability. Using polyethylene (PE) homo- and copolymers capable of silane-based crosslinking as modifiers was explored in the present study, which allows decoupling of the mixing and crosslinking processes. Commercial silane-copolymerized low-density PE (LD-PEX) from a high-pressure process and silane-grafted high-density PE (HD-PEX) were studied as impact modifiers for different types of PP copolymers, including non-modified reference PE grades, LDPE and HDPE. Blends based on ethylene-propylene random copolymers (PPR) and based on impact- (PPI) and random-impact (PPRI) copolymers show improvements of the stiffness-impact balance; however, to different degrees. While the absolute softest and most ductile compositions are achieved with the already soft PPRI copolymer base, the strongest relative effects are found for the PPR based blends. Modifiers with lower density are clearly superior in the toughening effect, with the LD-PEX including acrylate as second comonomer sticking out due to its glass transition around -40 °C. The impact strength improvement found in most compositions (except at very high content) results, however, not from the expected phase stabilization. For comparable systems, particle sizes are normally higher with crosslinking, probably because the process already starts during mixing. Thermoplastic processability could be retained in all cases, but the drop in melt flow rate limits the practical applicability of such systems.