On-chip topological beamformer for multi-link terahertz 6G to XG wireless.

Terahertz (THz) wireless communication holds immense potential to revolutionize future 6G to XG networks with high capacity, low latency and extensive connectivity. Efficient THz beamformers are essential for energy-efficient connections, compensating path loss, optimizing resource usage and enhancing spectral efficiency. However, current beamformers face several challenges, including notable loss, limited bandwidth, constrained spatial coverage and poor integration with on-chip THz circuits. Here we present an on-chip broadband THz topological beamformer using valley vortices for waveguiding, splitting and perfect isolation in waveguide phased arrays, featuring 184 densely packed valley-locked waveguides, 54 power splitters and 136 sharp bends. Leveraging neural-network-assisted inverse design, the beamformer achieves complete 360° azimuthal beamforming with gains of up to 20 dBi, radiating THz signals into free space with customizable user-defined beams. Photoexciting the all-silicon beamformer enables reconfigurable control of THz beams. The low-loss and broadband beamformer enables a 72-Gbps chip-to-chip wireless link over 300 mm and eight simultaneous 40-Gbps wireless links. Using four of these links, we demonstrate point-to-4-point real-time HD video streaming. Our work provides a complementary metal-oxide-semiconductor-compatible THz topological photonic integrated circuit for efficient large-scale beamforming, enabling massive single-input multiple-output and multiple-input and multiple-output systems for terabit-per-second 6G to XG wireless communications.

Suspended 2-D photonic crystal aluminum nitride membrane reflector.

We experimentally demonstrated a free-standing two-dimensional (2-D) photonic crystal (PhC) aluminum nitride (AlN) membrane to function as a free space (or out-of-plane) reflector working in the mid infrared region. By etching circular holes of radius 620nm in a 330nm thick AlN slab, greater than 90% reflection was measured from 3.08µm to 3.78µm, with the peak reflection of 96% at 3.16µm. Due to the relatively low refractive index of AlN, we also investigated the importance of employing methods such as sacrificial layer release to enhance the performance of the PhC. In addition, characterization of the AlN based PhC was also done up to 450°C to examine the impact of thermo-optic effect on the performance. Despite the high temperature operation, the redshift in the peak reflection wavelengths of the device was estimated to be only 14.1nm. This equates to a relatively low thermo-optic coefficient 2.22 × 10(-5) K(-1) for AlN. Such insensitivity to thermo-optic effect makes AlN based 2-D PhC a promising technology to be used as photonic components for high temperature applications such as Fabry-Perot interferometer used for gas sensing in down-hole oil drilling and ruggedized electronics.

Two-dimensional photonic-crystal-based Fabry-Perot etalon.

We demonstrate the design, fabrication, and characterization of a polycrystalline-silicon-based photonic crystal Fabry-Perot etalon, which is aimed to work in the mid-infrared wavelengths. The highly reflective mirrors required in a Fabry-Perot etalon are realized by freestanding polycrystalline-silicon-based photonic crystal membranes with etched circular air holes. A peak reflection of 96.4% is observed at 3.60 µm. We propose a monolithic CMOS-compatible fabrication process to configure two such photonic crystal mirrors to be in parallel to form a Fabry-Perot etalon; a filtered transmission centered at 3.51 µm is observed. The quality factor measured is around 300, which is significantly higher than in existing works. This creates the possibility of using such devices for high-resolution applications such as gas sensing and hyperspectral imaging.

Slow light topological photonics with counter-propagating waves and its active control on a chip.

Topological slow light exhibits potential to achieve stopped light by virtue of its widely known robust and non-reciprocal behaviours. Conventional approach for achieving topological slow light often involves flat-band engineering without disentangling the underlying physical mechanism. Here, we unveil the presence of counter-propagating waves within valley kink states as the distinctive hallmark of the slow light topological photonic waveguides. These counter-propagating waves, supported by topological vortices along glide-symmetric interface, provide significant flexibility for controlling the slowness of light. We tune the group velocity of light by changing the spatial separation between vortices adjacent to the glide-symmetric interface. We also dynamically control the group delay by introducing a non-Hermitian defect using photoexcitation to adjust the relative strength of the counter-propagating waves. This study introduces active slow light topological photonic device on a silicon chip, opening new horizons for topological photon transport through defects, topological light-matter interactions, nonlinear topological photonics, and topological quantum photonics.

150 Gbps THz Chipscale Topological Photonic Diplexer.

Photonic diplexers are being widely investigated for high data transfer rates in on-chip communication. However, dividing the available spectrum into nonoverlapping multicarrier frequency sub-bands has remained a challenge in designing frequency-selective time-invariant channels. Here, an on-chip topological diplexer is reported exhibiting terahertz frequency band filtering through Klein tunneling of topological edge modes. The silicon topological diplexer chip facilitates two high-speed channels with quadrature amplitude modulation (QAM) over a broad bandwidth of 12.5 GHz each. These channels operate at carrier frequencies of 305 and 321.6 GHz, achieving a combined diplexer capacity of 150 Gbit s-1. To ensure minimal interference between adjacent channels, a guard band is implemented. Topologically protected edge modes suppress the frequency selective fading of the broadband signals and hold promise for diverse integrated photonic applications spanning terahertz and telecommunication realms, including the design of lossless topological multiplexers, interconnects, antennas, and modulators for the sixth to X generation (6G to XG) wireless.

Electromechanically Reconfigurable Terahertz Stereo Metasurfaces.

Dynamic terahertz devices are vital for the next generation of wireless communication, sensing, and non-destructive imaging technologies. Metasurfaces have emerged as a paradigm-shifting platform, offering varied functionalities, miniaturization, and simplified fabrication compared to their 3D counterparts. However, the presence of in-plane mirror symmetry and reduced degree of freedom impose fundamental limitations on achieving advanced chiral response, beamforming, and reconfiguration capabilities. In this work, a platform composed of electrically actuated resonators that can be colossally reconfigured between planar and 3D geometries is demonstrated. To illustrate the platform, metadevices with 3D Split Ring Resonators are fabricated, wherein two counteracting driving forces are combined: i) folding induced by stress mismatch, which enables non-volatile state design and ii) unfolding triggered by the strain associated with insulator-to-metal transition in VO2, which facilitates volatile structural reconfiguration. This large structural reconfiguration space allows for resonance mode switching, widely tunable magnetic and electric polarizabilities, and increased frequency agility. Moreover, the unique properties of VO2, such as the hysteretic nature of its phase transition is harnessed to demonstrate a multi-state memory. Therefore, these VO2 integrated metadevices are highly attractive for the realization of 6G communication devices such as reconfigurable intelligent surfaces, holographic beam formers, and spatial light modulators.

Editorial for the Special Issue on Broadband Terahertz Devices and Communication Technologies.

The remarkable explosion of wireless devices and bandwidth-consuming Internet applications have boosted the demand for wireless communications with ultra-high data rate [...].

Terahertz Reconfigurable Intelligent Surfaces (RISs) for 6G Communication Links.

The forthcoming sixth generation (6G) communication network is envisioned to provide ultra-fast data transmission and ubiquitous wireless connectivity. The terahertz (THz) spectrum, with higher frequency and wider bandwidth, offers great potential for 6G wireless technologies. However, the THz links suffers from high loss and line-of-sight connectivity. To overcome these challenges, a cost-effective method to dynamically optimize the transmission path using reconfigurable intelligent surfaces (RISs) is widely proposed. RIS is constructed by embedding active elements into passive metasurfaces, which is an artificially designed periodic structure. However, the active elements (e.g., PIN diodes) used for 5G RIS are impractical for 6G RIS due to the cutoff frequency limitation and higher loss at THz frequencies. As such, various tuning elements have been explored to fill this THz gap between radio waves and infrared light. The focus of this review is on THz RISs with the potential to assist 6G communication functionalities including pixel-level amplitude modulation and dynamic beam manipulation. By reviewing a wide range of tuning mechanisms, including electronic approaches (complementary metal-oxide-semiconductor (CMOS) transistors, Schottky diodes, high electron mobility transistors (HEMTs), and graphene), optical approaches (photoactive semiconductor materials), phase-change materials (vanadium dioxide, chalcogenides, and liquid crystals), as well as microelectromechanical systems (MEMS), this review summarizes recent developments in THz RISs in support of 6G communication links and discusses future research directions in this field.

Phototunable chip-scale topological photonics: 160 Gbps waveguide and demultiplexer for THz 6G communication.

The revolutionary 5G cellular systems represent a breakthrough in the communication network design to provide a single platform for enabling enhanced broadband communications, virtual reality, autonomous driving, and the internet of everything. However, the ongoing massive deployment of 5G networks has unveiled inherent limitations that have stimulated the demand for innovative technologies with a vision toward 6G communications. Terahertz (0.1-10 THz) technology has been identified as a critical enabler for 6G communications with the prospect of massive capacity and connectivity. Nonetheless, existing terahertz on-chip communication devices suffer from crosstalk, scattering losses, limited data speed, and insufficient tunability. Here, we demonstrate a new class of phototunable, on-chip topological terahertz devices consisting of a broadband single-channel 160 Gbit/s communication link and a silicon Valley Photonic Crystal based demultiplexer. The optically controllable demultiplexing of two different carriers modulated signals without crosstalk is enabled by the topological protection and a critically coupled high-quality (Q) cavity. As a proof of concept, we demultiplexed high spectral efficiency 40 Gbit/s signals and demonstrated real-time streaming of uncompressed high-definition (HD) video (1.5 Gbit/s) using the topological photonic chip. Phototunable silicon topological photonics will augment complementary metal oxide semiconductor (CMOS) compatible terahertz technologies, vital for accelerating the development of futuristic 6G and 7G communication era driving the real-time terabits per second wireless connectivity for network sensing, holographic communication, and cognitive internet of everything.

Active Ultrahigh-Q (0.2 × 106 ) THz Topological Cavities on a Chip.

Rapid scaling of semiconductor devices has led to an increase in the number of processor cores and integrated functionalities onto a single chip to support the growing demands of high-speed and large-volume consumer electronics. To meet this burgeoning demand, an improved interconnect capacity in terms of bandwidth density and active tunability is required for enhanced throughput and energy efficiency. Low-loss terahertz silicon interconnects with larger bandwidth offer a solution for the existing inter-/intrachip bandwidth density and energy-efficiency bottleneck. Here, a low-loss terahertz topological interconnect-cavity system is presented that can actively route signals through sharp bends, by critically coupling to a topological cavity with an ultrahigh-quality (Q) factor of 0.2 × 106 . The topologically protected large Q factor cavity enables energy-efficient optical control showing 60 dB modulation. Dynamic control is further demonstrated of the critical coupling between the topological interconnect-cavity for on-chip active tailoring of the cavity resonance linewidth, frequency, and modulation through complete suppression of the back reflection. The silicon topological cavity is complementary metal-oxide-semiconductor (CMOS)-compatible and highly desirable for hybrid electronic-photonic technologies for sixth (6G) generation terahertz communication devices. Ultrahigh-Q cavity also paves the path for designing ultrasensitive topological sensors, terahertz topological integrated circuits, and nonlinear topological photonic devices.

Space-Time Wave Packets from Smith-Purcell Radiation.

Space-time wave packets are electromagnetic waves with strong correlations between their spatial and temporal degrees of freedom. These wave packets have gained much attention for fundamental properties like propagation invariance and user-designed group velocities, and for potential applications like optical microscopy, micromanipulation, and laser micromachining. Here, free-electron radiation is presented as a natural and versatile source of space-time wave packets that are ultra-broadband and highly tunable in frequency. For instance, ab initio theory and numerical simulations show that the intensity profile of space-time wave packets from Smith-Purcell radiation can be directly tailored through the grating properties, as well as the velocity and shape of the electron bunches. The result of this work indicates a viable way of generating space-time wave packets at exotic frequencies such as the terahertz and X-ray regimes, potentially paving the way toward new methods of shaping electromagnetic wave packets through free-electron radiation.

Electrically Programmable Terahertz Diatomic Metamolecules for Chiral Optical Control.

Optical chirality is central to many industrial photonic technologies including enantiomer identification, ellipsometry-based tomography, and spin multiplexing in optical communications. However, a substantial chiral response requires a three-dimensional constituent, thereby making the morphology highly complex to realize structural reconfiguration. Moreover, an active reconfiguration demands intense dosage of external stimuli that pose a major limitation for on-chip integration. Here, we report a low bias, electrically programmable synthetic chiral paradigm with a remarkable reconfiguration among levorotatory, dextrorotatory, achiral, and racemic conformations. The switchable optical activity induced by the chiral conformations enables a transmission-type duplex spatial light modulator for terahertz single pixel imaging. The prototype delivers a new strategy towards reconfigurable stereoselective photonic applications and opens up avenues for on-chip programmable chiral devices with tremendous applications in biology, medicine, chemistry, and photonics.

Chalcogenide Phase Change Material for Active Terahertz Photonics.

The strikingly contrasting optical properties of various phases of chalcogenide phase change materials (PCM) has recently led to the development of novel photonic devices such as all-optical non-von Neumann memory, nanopixel displays, color rendering, and reconfigurable nanoplasmonics. However, the exploration of chalcogenide photonics is currently limited to optical and infrared frequencies. Here, a phase change material integrated terahertz metamaterial for multilevel nonvolatile resonance switching with spatial and temporal selectivity is demonstrated. By controlling the crystalline proportion of the PCM film, multilevel, non-volatile, terahertz resonance switching states with long retention time at zero hold power are realized. Spatially selective reconfiguration at sub-metamaterial scale is shown by delivering electrical stimulus locally through designer interconnect architecture. The PCM metamaterial also features ultrafast optical modulation of terahertz resonances with tunable switching speed based on the crystalline order of the PCM film. The multilevel nonvolatile, spatially selective, and temporally tunable PCM metamaterial will provide a pathway toward development of novel and disruptive terahertz technologies including spatio-temporal terahertz modulators for high speed wireless communication, neuromorphic photonics, and machine-learning metamaterials.

Reconfigurable MEMS Fano metasurfaces with multiple-input-output states for logic operations at terahertz frequencies.

A broad range of dynamic metasurfaces has been developed for manipulating the intensity, phase and wavefront of electromagnetic radiation from microwaves to optical frequencies. However, most of these metasurfaces operate in single-input-output state. Here, we experimentally demonstrate a reconfigurable MEMS Fano resonant metasurface possessing multiple-input-output (MIO) states that performs logic operations with two independently controlled electrical inputs and an optical readout at terahertz frequencies. The far-field behaviour of Fano resonance exhibits XOR and XNOR operations, while the near-field resonant confinement enables the NAND operation. The MIO configuration resembling hysteresis-type closed-loop behaviour is realized through inducing electromechanically tuneable out-of-plane anisotropy in the near-field coupling of constituent resonator structures. The XOR metamaterial gate possesses potential applications in cryptographically secured terahertz wireless communication networks. Furthermore, the MIO features could lay the foundation for the realization of programmable and randomly accessible metamaterials with enhanced electro-optical performance across terahertz, infrared and optical frequencies.

A Superconducting Dual-Channel Photonic Switch.

The mechanism of Cooper pair formation and its underlying physics has long occupied the investigation into high temperature (high-Tc ) cuprate superconductors. One of the ways to unravel this is to observe the ultrafast response present in the charge carrier dynamics of a photoexcited specimen. This results in an interesting approach to exploit the dissipation-less dynamic features of superconductors to be utilized for designing high-performance active subwavelength photonic devices with extremely low-loss operation. Here, dual-channel, ultrafast, all-optical switching and modulation between the resistive and the superconducting quantum mechanical phase is experimentally demonstrated. The ultrafast phase switching is demonstrated via modulation of sharp Fano resonance of a high-Tc yttrium barium copper oxide (YBCO) superconducting metamaterial device. Upon photoexcitation by femtosecond light pulses, the ultrasensitive cuprate superconductor undergoes dual dissociation-relaxation dynamics, with restoration of superconductivity within a cycle, and thereby establishes the existence of dual switching windows within a timescale of 80 ps. Pathways are explored to engineer the secondary dissociation channel which provides unprecedented control over the switching speed. Most importantly, the results envision new ways to accomplish low-loss, ultrafast, and ultrasensitive dual-channel switching applications that are inaccessible through conventional metallic and dielectric based metamaterials.

Active Phase Transition via Loss Engineering in a Terahertz MEMS Metamaterial.

Controlling the phase of local radiation by using exotic metasurfaces has enabled promising applications in a diversified set of electromagnetic wave manipulation such as anomalous wavefront deflection, flat lenses, and holograms. Here, we theoretically and experimentally demonstrate an active phase transition in a micro-electromechanical system-based metadevice where both the phase response and the dispersion of the metamaterial cavity are dynamically tailored. The phase transition is determined by the radiative and the absorptive losses in a metal-insulator-metal cavity that obeys the coupled-mode theory. The complete understanding of the phase diagram in a reconfigurable configuration would open up avenues for designing multifunctional metadevices that can be actively switched between different phases leading to a plethora of applications in polarization control, beam deflectors, and holographic metamaterials.

Thermoplasmonic Study of a Triple Band Optical Nanoantenna Strongly Coupled to Mid IR Molecular Mode.

We report the first thermal study of a triple band plasmonic nanoantenna strongly coupled to a molecular mode at mid IR wavelength (MW IR). The hybrid plasmonic structure supports three spatially and spectrally variant resonances of which two are magnetic and one is dipolar in nature. A hybridized mode is excited by coupling the structure's plasmonic mode with the vibrational mode of PMMA at 5.79 µm. Qualitative agreement between the spectral changes in simulation and experiment clearly indicates that resistive heating is the dominant mechanisms behind the intensity changes of the dipolar and magnetic peaks. The study also unveils the thermal insensitivity of the coupled mode intensity as the temperature is increased. We propose a mechanism to reduce the relative intensity change of the coupled mode at elevated temperature by mode detuning and surface current engineering and demonstrate less than 9% intensity variation. Later, we perform a temperature cycling test and investigate into the degradation of the Au-PMMA composite device. The failure condition is identified to be primarily associated with the surface chemistry of the material interface rather than the deformation of the nanopatterns. The study reveals the robustness of the strongly coupled hybridized mode even under multiple cycling.

Microelectromechanically tunable multiband metamaterial with preserved isotropy.

We experimentally demonstrate a micromachined reconfigurable metamaterial with polarization independent characteristics for multiple resonances in terahertz spectral region. The metamaterial unit cell consists of eight out-of-plane deformable microcantilevers placed at each corner of an octagon ring. The octagon shaped unit cell geometry provides the desired rotational symmetry, while the out-of-plane movable cantilevers preserves the symmetry at different configurations of the metamaterial. The metamaterial is shown to provide polarization independent response for both electrical inductive-capacitive (eLC) resonance and dipolar resonance at all states of actuation. The proposed metamaterial has a switching range of 0.16 THz and 0.37 THz and a transmission intensity change of more than 0.2 and 0.7 for the eLC and dipolar resonances, respectively for both TE and TM modes. Further optimization of the metal layer thickness, provides an improvement of up to 80% modulation at 0.57 THz. The simultaneously tunable dual band isotropic metamaterial will enable the realization of high performance electro-optic devices that would facilitate numerous terahertz applications such as compressive terahertz imaging, miniaturized terahertz spectroscopy and next generation high speed wireless communication possible in the near future.