Template assisted lithium superoxide growth for lithium-oxygen batteries.

Developing batteries with energy densities comparable to internal combustion technology is essential for a worldwide transition to electrified transportation. Li-O2 batteries are seen as the 'holy grail' of battery technologies since they have the highest theoretical energy density of all battery technologies. Current lithium-oxygen (Li-O2) batteries suffer from large charge overpotentials related to the electronic resistivity of the insulating lithium peroxide (Li2O2) discharge product. One potential solution is the formation and stabilization of a lithium superoxide (LiO2) discharge intermediate that exhibits good electronic conductivity. However, LiO2 is reported to be unstable at ambient temperature despite its favorable formation energy at -1.0 eV per atom. In this paper - based on our recent work on the development of cathode materials for aprotic lithium oxygen batteries including two intermetallic compounds, LiIr3 and LiIr, that are found to form good template interfaces with LiO2 - a simple goodness of fit R factor to gauge how well a template surface structure can support LiO2 growth, is developed. The R factor is a quantitative measurement to calculate the geometric difference in the unit cells of specific Miller Index 2D planes of the template surface and LiO2. Using this as a guide, the R factors for LiIr3, LiIr, and La2NiO4+δ, are found to be good. This guide is attested by simple extension to other noble metal intermetallics with electrochemical cycling data including LiRh3, LiRh, and Li2Pd. Finally, the template concept is extended to main group elements and the R factors for LiO2 (111) and Li2Ca suggest that Li2Ca is a possible candidate for the template assisted LiO2 growth strategy.

High-Rate Long Cycle-Life Li-Air Battery Aided by Bifunctional InX3 (X = I and Br) Redox Mediators.

Redox mediators (RMs) are solution-based additives that have been extensively used to reduce the charge potential and increase the energy efficiency of Li-oxygen (Li-O2) batteries. However, in the presence of RMs, achieving a long cycle-life operation of Li-O2 batteries at a high current rate is still a major challenge. In this study, we discover a novel synergy among InX3 (X = I and Br) bifunctional RMs, molybdenum disulfide (MoS2) nanoflakes as the air electrode, dimethyl sulfoxide/ionic liquid hybrid electrolyte, and LiTFSI as a salt to achieve long cycle-life operations of Li-O2 batteries in a dry air environment at high charge-discharge rates. Our results indicate that batteries with InI3 operate up to 450 cycles with a current density of 0.5 A g-1 and 217 cycles with a current density of 1 A g-1 at a fixed capacity of 1 A h g-1. Batteries with InBr3 operate up to 600 cycles with a current density of 1 A g-1. These batteries can also operate at a higher charge rate of 2 A g-1 up to 200 cycles (for InBr3) and 160 cycles (for InI3). Our experimental and computational results reveal that while X3- is the source of the redox mediator, LiX at the MoS2 cathode, In3+ reacts on the lithium anode side to form a protective layer on the surface, thus acting as an effective bifunctional RM in a dry air environment. This evidence for a simultaneous improvement in the current rates and cycle life of a battery in a dry air atmosphere opens a new direction for research for advanced energy storage systems.

Electron Transfer Kinetics at Graphene Quantum Dot Assembly Electrodes.

Electrochemical performance of nanostructured carbon electrodes was evaluated using cyclic voltammetry and a simple simulation model. The electrodes were prepared from soluble precursors by anodic electrodeposition of two sizes of graphene quantum dot assemblies (hexabenzocoronene (HBC) and carbon quantum dot (CQD)) onto a conductive support. Experimental and simulated voltammograms enabled the extraction of the following electrode parameters: conductivity of the electrodes (a combination of ionic and electronic contributions), density of available electrode states at different potentials, and tunneling rate constant (Marcus-Gerischer model) for interfacial charge transfer to ferrocene/ferrocenium (Fc/Fc+) couple. The parameters indicate that HBC and CQD have significant density of electronic states at potentials more positive than -0.5 V versus Ag/Ag+. Enabled by these large densities, the electron transfer rates at the Fc/Fc+ thermodynamic potential are several orders of magnitude slower than those commonly observed on other carbon electrodes. This study is expected to accelerate the discovery of improved synthetic carbon electrodes by providing fast screening methodology of their electrochemical behavior.