Spatialized PM2.5 during COVID-19 pandemic in Brazil's most populous southern city: implications for post-pandemic era.

Brazil has experienced one of the highest COVID-19 fatality rates globally. While numerous studies have explored the potential connection between air pollution, specifically fine particulate matter (PM2.5), and the exacerbation of SARS-CoV-2 infection, the majority of this research has been conducted in foreign regions-Europe, the United States, and China-correlating generalized pollution levels with health-related scopes. In this study, our objective is to investigate the localized connection between exposure to air pollution exposure and its health implications within a specific Brazilian municipality, focusing on COVID-19 susceptibility. Our investigation involves assessing pollution levels through spatial interpolation of in situ PM2.5 measurements. A network of affordable sensors collected data across 9 regions in Curitiba, as well as its metropolitan counterpart, Araucaria. Our findings distinctly reveal a significant positive correlation (with r-values reaching up to 0.36, p-value < 0.01) between regions characterized by higher levels of pollution, particularly during the winter months (with r-values peaking at 0.40, p-value < 0.05), with both COVID-19 mortality and incidence rates. This correlation gains added significance due to the intricate interplay between urban atmospheric pollution and regional human development indices. Notably, heightened pollution aligns with industrial hubs and intensified vehicular activity. The spatial analysis performed in this study assumes a pivotal role by identifying priority regions that require targeted action post-COVID. By comprehending the localized dynamics between air pollution and its health repercussions, tailored strategies can be implemented to alleviate these effects and ensure the well-being of the public.

The new WHO air quality guidelines for PM2.5: predicament for small/medium cities.

The global burden of disease estimated that approximately 7.1 million deaths worldwide were related to air pollution in 2016. However, only a limited number of small- and middle-sized cities have air quality monitoring networks. To date, air quality in terms of particulate matter is still mainly focused on mass concentration, with limited compositional monitoring even in mega cities, despite evidence indicating differential toxicity of particulate matter. As this evidence is far from conclusive, we conducted PM2.5 bioaccessibility studies of potentially harmful elements in a medium-sized city, Londrina, Brazil. The data was interpreted in terms of source apportionment, the health risk evaluation and the bioaccessibility of inorganic contents in an artificial lysosomal fluid. The daily average concentration of PM2.5 was below the WHO guideline, however, the chemical health assessment indicated a considerable health risk. The in vitro evaluation showed different potential mobility when compared to previous studies in large-sized cities, those with 1 million inhabitants or more (Curitiba and Manaus). The new WHO guideline for PM2.5 mass concentration puts additional pressure on cities where air pollution monitoring is limited and/or neglected, because decision making is mainly revenue-driven and not socioeconomic-driven. Given the further emerging evidence that PM chemical composition is as, or even more, important than mass concentration levels, the research reported in the paper could pave the way for the necessary inter- and intra-city collaborations that are needed to address this global health challenge.

Health Risks for a Rural Community in Bokkos, Plateau State, Nigeria, Exposed to Potentially Toxic Elements from an Abandoned Tin Mine.

The past mining activities in Bokkos Local Government Area (LGA) were performed in an uncontrolled way and gave rise to many abandoned ponds now serving as domestic and irrigation water sources. Past research focused mainly on the environmental impact, and we show for the first time what the human health risk through consumption of contaminated food crops is in these communities. This study was designed to determine the level of Potentially Toxic Elements (PTEs) contamination in pond water, soil, and food crops and assess the health risk of inhabitants in the abandoned tin mining community in Bokkos LGA. Samples of the mining pond water, soil, and selected food crops from farms irrigated with the pond water: bitter leaf (Vernonia amygdalina), pepper (Piper nigrum), okra (Albelmoschus esculentus), maize (Zea mays), sweet potato (Ipomoea batatas), and Irish potato (Solanum tuberosum) were analyzed for each of the eight PTEs (viz. Cu, Cr, Fe, Mn, Ni, Zn, Cd, and Pb) using inductively coupled plasma optical emission spectrometry (ICP-OES). The results obtained showed that the levels of all the PTEs analyzed in the soil, pond water, and selected food crops except for Fe and Mn in soil and Cd in sweet potato were greater than their corresponding background area values (p < 0.05). Also, the mean concentrations of all the PTEs except for Cu in pond water were significantly (p < 0.05) higher than the WHO maximum permissible limit. With the exception of Fe, Ni, and Zn for pepper and okra, Cu and Fe for maize grains as well as Cu, Ni, and Zn for sweet and Irish potatoes and Fe and Cd for sweet potato, the mean concentrations of PTEs in the food crops were significantly higher than WHO maximum permissible limit. The EF values of Cd (0.39); Cu (3.59) and Ni (2.81); Cr (9.38) and Pb (17.84); and Mn (178.13) and Zn (83.22) classified the soil as minimally, moderately, significantly, and extremely highly enriched, respectively. The PI values of all the PTEs in the soil studied were all greater than 5, indicating that the soils were severely contaminated. There was evidence that food crops significantly bioaccumulated PTEs either as a result of contaminated soil and/or irrigation water. The bioaccumulation was not uniform and was dominated by transfer from the polluted irrigation water. The bitter leaf, okra, and to some extent maize had the highest transfer of PTEs, and Mn, Cu, and Zn had the highest bioaccumulation in the food crops investigated. The hazardous index (HI) for the eight PTEs through the consumption of food crops was 107 for children and 33 for adults which greatly exceeded the recommended limit of 1, thus indicating that possible health risks exist for both local children and adults. For every PTE, the values of HI for children are many-fold higher than those for adults, which is of particular concern due to the high HI values for Pb found for maize consumption, a typical staple food. The cancer risk values for Cr and Ni for all the food crops were within 10-3-10-1 which is several fold higher than the permissible limits (10-6 and < 10-4) indicating the high carcinogenic risk. It can be concluded based on the results and risk assessment provided by this study that human exposure to mining pond water and soil in farms around the mining pond through the food chain suggests the high vulnerability of the local community to PTE toxicity. Long-term preventive measures to safeguard the health of the residents need to be put in place.

An investigation into the use of < 38 µm fraction as a proxy for < 10 µm road dust particles.

It is well documented that a large portion of urban particulate matters is derived from road dust. Isolating particles of RD which are small enough to be inhaled, however, is a difficult process. In this study, it is shown for the first time that the < 38 µm fraction of road dust particles can be used as a proxy for road dust particles < 10 µm in bioaccessibility studies. This study probed similarities between the < 10 and < 38µm fractions of urban road dust to show that the larger of the two can be used for analysis for which larger sample masses are required, as is the case with in vitro analysis. Road dust, initially segregated to size < 38 µm using sieves, was again size segregated to < 10 µm using water deposition. Both the original < 38 µm and the separated < 10 µm fractions were then subject to single particle analysis by SEM-EDX and bulk analysis by ICP-OES for its elemental composition. Dissolution tests in artificial lysosomal fluid, representative of lung fluid, were carried out on both samples to determine % bioaccessibility of selected potentially harmful elements and thus probe similarities/differences in in vitro behaviour between the two fractions. The separation technique achieved 94.3% of particles < 10 µm in terms of number of particles (the original sample contained 90.4% as determined by SEM-EDX). Acid-soluble metal concentration results indicated differences between the samples. However, when manipulated to negate the input of Si, SEM-EDX data showed general similarities in metal concentrations. Dissolution testing results indicated similar behaviour between the two samples in a simulated biological fluid.

A scoping study of component-specific toxicity of mercury in urban road dusts from three international locations.

This scoping study presents an investigation of the total and bioaccessible mercury concentrations in road dust (RD) from three international urban sites, where a one-off sampling campaign was conducted at each. This was done to address the hypothesis that the matrix in which mercury is found influences its ability to become accessible to the body once inhaled. For that purpose, the samples were analysed for total and pulmonary bioaccessible mercury and the data compared to the chemical structure of individual particles by SEM. The results obtained from this study suggest that a high mercury content does not necessarily equate to high bioaccessibility, a phenomenon which could be ascribed to the chemical character of the individual particles. It was found that the Manchester samples contained more pulmonary soluble mercury species (as determined by elemental associations of Hg and Cl) in comparison to the other two samples, Curitiba, Brazil, and Johannesburg, South Africa. This finding ultimately underlines the necessity to conduct a site-specific in-depth analysis of RD, to determine the concentration, chemical structure and molecular speciation of the materials within the complex matrix of RD. Therefore, rather than simply assuming that higher bulk concentrations equate to more significant potential human health concerns, the leaching potential of the metal/element in its specific form (for example as a mineral) should be ascertained. The importance of individual particle behaviour in the determination of human health risk is therefore highlighted.

Effectiveness of selective catalytic reduction systems on reducing gaseous emissions from an engine using diesel and biodiesel blends.

The aim of this investigation was to quantify organic and inorganic gas emissions from a four-cylinder diesel engine equipped with a urea selective catalytic reduction (SCR) system. Using a bench dynamometer, the emissions from the following mixtures were evaluated using a Fourier transform infrared (FTIR) spectrometer: low-sulfur diesel (LSD), ultralow-sulfur diesel (ULSD), and a blend of 20% soybean biodiesel and 80% ULSD (B20). For all studied fuels, the use of the SCR system yielded statistically significant (p < 0.05) lower NOx emissions. In the case of the LSD and ULSD fuels, the SCR system also significantly reduced emissions of compounds with high photochemical ozone creation potential, such as formaldehyde. However, for all tested fuels, the SCR system produced significantly (p < 0.05) higher emissions of N2O. In the case of LSD, the NH3 emissions were elevated, and in the case of ULSD and B20 fuels, the non-methane hydrocarbon (NMHC) and total hydrocarbon of diesel (HCD) emissions were significantly higher.

Methods, fluxes and sources of gas phase alkyl nitrates in the coastal air.

The daily and seasonal atmospheric concentrations, deposition fluxes and emission sources of a few C3-C9 gaseous alkyl nitrates (ANs) at the Belgian coast (De Haan) on the Southern North Sea were determined. An adapted sampler design for low- and high-volume air-sampling, optimized sample extraction and clean-up, as well as identification and quantification of ANs in air samples by means of gas chromatography mass spectrometry, are reported. The total concentrations of ANs ranged from 0.03 to 85 pptv and consisted primarily of the nitro-butane and nitro-pentane isomers. Air mass backward trajectories were calculated by the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model to determine the influence of main air masses on AN levels in the air. The shorter chain ANs have been the most abundant in the Atlantic/Channel/UK air masses, while longer chain ANs prevailed in continental air. The overall mean N fluxes of the ANs were slightly higher for summer than those for winter-spring, although their contributions to the total nitrogen flux were low. High correlations between AN and HNO2 levels were observed during winter/spring. During summer, the shorter chain ANs correlated well with precipitation. Source apportionment by means of principal component analysis indicated that most of the gas phase ANs could be attributed to traffic/combustion, secondary photochemical formation and biomass burning, although marine sources may also have been present and a contributing factor.

BTEX profile and health risk at the largest bulk port in Latin America, Paranaguá Port.

Port-related activities have a detrimental impact on the air quality both at the point of source and for considerable distances beyond. These activities include, but are not limited to, heavy cargo traffic, onboard, and at-berth emissions. Due to differences in construction, operation, location, and policies at ports, the site-specific air pollution cocktail could result in different human health risks. Thus, monitoring and evaluating such emissions are essential to predict the risk to the community. Environmental agencies often monitor key pollutants (PM2.5, PM10, NO2, SO2), but the volatile organic carbons (VOCs) most often are not, due to its analytical challenging. This study intends to fill that gap and evaluate the VOC emissions caused by activities related to the port of Paranaguá - one of the largest bulk ports in Latin America - by characterizing BTEX concentrations at the port and its surroundings. At seven different sites, passive samplers were used to measure the dispersion of BTEX concentrations throughout the port and around the city at weekly intervals from November 2018 to January 2019. The average and uncertainty of BTEX concentrations (µg m-3) were 0.60 ± 0.43, 5.58 ± 3.80, 3.30 ± 2.41, 4.66 ± 3.67, and 2.82 ± 1.95 for benzene, toluene, ethylbenzene, m- and p-xylene, and o-xylene, respectively. Relationships between toluene and benzene and health risk analysis were used to establish the potential effects of BTEX emissions on the population of the city of Paranaguá. Ratio analysis (T/B, B/T, m,p X/Et, and m,p X/B) indicate that the BTEX levels are mainly from fresh emission sources and that photochemical ageing was at minimum. The cancer risk varied across the sampling trajectory, whereas ethylbenzene represented a moderate cancer risk development for the exposed population in some of the locations. This study provided the necessary baseline data to support policymakers on how to change the circumstances of those currently at risk, putting in place a sustainable operation.

A new strategy for risk assessment of PM2.5-bound elements by considering the influence of wind regimes.

For regulatory purposes, air pollution has been reduced to management of air quality control regions (AQCR), by inventorying pollution sources and identifying the receptors significantly affected. However, beyond being source-dependent, particulate matter can be physically and chemically altered by factors and elements of climate during transport, as they act as local environmental constraints, indirectly modulating the adverse effects of particles on the environment and human health. This case study, at an industrial site in a Brazilian coastal city - Joinville, combines different methodologies to integrate atmospheric dynamics in a strategic risk assessment approach whereby the influence of different wind regimes on environmental and health risks of exposure to PM2.5-bound elements, are analysed. Although Joinville AQCR has been prone to stagnation/recirculation events, distinctly different horizontal wind circulation patterns indicate two airsheds within the region. The two sampling sites mirrored these two conditions and as a result we report different PM2.5 mass concentrations, chemical profiles, geo-accumulation, and ecological and human health risks. In addition, feedback mechanisms between the airsheds seem to aggravate the air quality and its effects even under good ventilation conditions. Recognizably, the risks associated with Co, Pb, Cu, Ni, Mn, and Zn loadings were extremely high for the environment as well as being the main contributors to elevated non-carcinogenic risks. Meanwhile, higher carcinogenic risks occurred during stagnation/recirculation conditions, with Cr as the major threat. These results highlight the importance of integrating local airshed characteristics into the risk assessment of PM2.5-bound elements since they can aggravate air pollution leading to different risks at a granular scale. This new approach to risk assessment can be employed in any city's longer-term development plan since it provides public authorities with a strategic perspective on incorporating environmental constraints into urban growth planning and development zoning regulations.

Acute changes in pulse pressure in relation to constituents of particulate air pollution in elderly persons.

An increased pulse pressure (difference between systolic and diastolic blood pressure) suggests aortic stiffening. The objective of this study was to examine the acute effects of both particulate matter (PM) mass and composition on blood pressure, among elderly persons. We carried out a panel study in persons living in elderly homes in Antwerp, Belgium. We recruited 88 non-smoking persons, 70% women with a mean age of 83 years (standard deviation: 5.2). Blood pressure was measured and a blood sample was collected on two time points, which were chosen so that there was an exposure contrast in ambient PM exposure. The elemental content of the collected indoor and outdoor PM(2.5) (particulate matter with an aerodynamic diameter <2.5 µm) mass concentration was measured. Oxygenated polycyclic aromatic hydrocarbons (oxy-PAHs) on outdoor PM(10) (particulate matter with an aerodynamic diameter <10 µm) were measured. Each interquartile range increase of 20.8 µg/m³ in 24-h mean outdoor PM(2.5) was associated with an increase in pulse pressure of 4.0 mm Hg (95% confidence interval: 1.8-6.2), in persons taking antihypertensive medication (n=57), but not in persons not using antihypertensive medication (n=31) (p for interaction: 0.02). Vanadium, iron and nickel contents of PM(2.5) were significantly associated with systolic blood pressure and pulse pressure, among persons on antihypertensive medication. Similar results were found for indoor concentrations. Of the oxy-PAHs, chrysene-5,6-dione and benzo[a]pyrene-3,6-dione were significantly associated with increases in systolic blood pressure and pulse pressure. In elderly, pulse pressure was positively associated with acute increases in outdoor and indoor air pollution, among persons taking antihypertensive medication. These results might form a mechanistic pathway linking air pollution as a trigger of cardiovascular events.

Active microbial ecosystem in glacier basal ice fuelled by iron and silicate comminution-derived hydrogen.

The basal zone of glaciers is characterized by physicochemical properties that are distinct from firnified ice due to strong interactions with underlying substrate and bedrock. Basal ice (BI) ecology and the roles that the microbiota play in biogeochemical cycling, weathering, and proglacial soil formation remain poorly described. We report on basal ice geochemistry, bacterial diversity (16S rRNA gene phylogeny), and inferred ecological roles at three temperate Icelandic glaciers. We sampled three physically distinct basal ice facies (stratified, dispersed, and debris bands) and found facies dependent on biological similarities and differences; basal ice character is therefore an important sampling consideration in future studies. Based on a high abundance of silicates and Fe-containing minerals and, compared to earlier BI literature, total C was detected that could sustain the basal ice ecosystem. It was hypothesized that C-fixing chemolithotrophic bacteria, especially Fe-oxidisers and hydrogenotrophs, mutualistically support associated heterotrophic communities. Basal ice-derived rRNA gene sequences corresponding to genera known to harbor hydrogenotrophic methanogens suggest that silicate comminution-derived hydrogen can also be utilized for methanogenesis. PICRUSt-predicted metabolism suggests that methane metabolism and C-fixation pathways could be highly relevant in BI, indicating the importance of these metabolic routes. The nutrients and microbial communities release from melting basal ice may play an important role in promoting pioneering communities establishment and soil development in deglaciating forelands.

Elemental Composition of PM2.5 and PM10 and Health Risks Assessment in the Industrial Districts of Chelyabinsk, South Ural Region, Russia.

Air pollution impacts all populations globally, indiscriminately and has site-specific variation and characteristics. Airborne particulate matter (PM) levels were monitored in a typical industrial Russian city, Chelyabinsk in three destinations, one characterized by high traffic volumes and two by industrial zone emissions. The mass concentration and trace metal content of PM2.5 and PM10 were obtained from samples collected during four distinct seasons of 2020. The mean 24-h PM10 ranged between 6 and 64 µg/m3. 24-h PM2.5 levels were reported from 5 to 56 µg/m3. About half of the 24-h PM10 and most of the PM2.5 values in Chelyabinsk were higher than the WHO recommendations. The mean PM2.5/PM10 ratio was measured at 0.85, indicative of anthropogenic input. To evaluate the Al, Fe, As, Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn concentration in PM2.5 and PM10, inductively coupled plasma mass spectrometry (ICP-MS) was used. Fe (337-732 ng/m3) was the most abundant component in PM2.5 and PM10 samples while Zn (77-206 ng/m3), Mn (10-96 ng/m3), and Pb (11-41 ng/m3) had the highest concentrations among trace elements. Total non-carcinogenic risks for children were found higher than 1, indicating possible health hazards. This study also presents that the carcinogenic risk for As, Cr, Co, Cd, Ni, and Pb were observed higher than the acceptable limit (1 × 10-6).

Dynamic model to predict the association between air quality, COVID-19 cases, and level of lockdown.

Studies have reported significant reductions in air pollutant levels due to the COVID-19 outbreak worldwide global lockdowns. Nevertheless, all of the reports are limited compared to data from the same period over the past few years, providing mainly an overview of past events, with no future predictions. Lockdown level can be directly related to the number of new COVID-19 cases, air pollution, and economic restriction. As lockdown status varies considerably across the globe, there is a window for mega-cities to determine the optimum lockdown flexibility. To that end, firstly, we employed four different Artificial Neural Networks (ANN) to examine the compatibility to the original levels of CO, O3, NO2, NO, PM2.5, and PM10, for São Paulo City, the current Pandemic epicenter in South America. After checking compatibility, we simulated four hypothetical scenarios: 10%, 30%, 70%, and 90% lockdown to predict air pollution levels. To our knowledge, ANN have not been applied to air pollution prediction by lockdown level. Using a limited database, the Multilayer Perceptron neural network has proven to be robust (with Mean Absolute Percentage Error âˆ¼ 30%), with acceptable predictive power to estimate air pollution changes. We illustrate that air pollutant levels can effectively be controlled and predicted when flexible lockdown measures are implemented. The models will be a useful tool for governments to manage the delicate balance among lockdown, number of COVID-19 cases, and air pollution.

Atomic Absorption Spectrometry Methods to Access the Metal Solubility of Aerosols in Artificial Lung Fluid.

Recent studies to quantify the health risks that fine particulate matter with an aerodynamic less than 2.5 µm (PM2.5) pose use in vitro approaches. One of these approaches is to incubate PM2.5 in artificial lysosomal fluid for a given period at body temperature. These body fluids used have a high ionic strength and as such can be challenging samples to analyze with atomic spectroscopy techniques. As PM2.5 is a primary health hazard because it is tiny enough to penetrate deep into the lungs and could, in addition, dissolve in the lung fluid it is important to quantify elements of toxic and/or carcinogenic concerns, reliably and accurately. Sophisticated instrumentation and expensive pre-treatment of challenging samples are not always available, especially in developing countries. To evaluate the applicability of graphite furnace atomic absorption spectrometry (GFAAS) without Zeeman correction capability to detect trace quantities of heavy metals leached from PM2.5 on to artificial lung fluid, univariate and multivariate approaches have been used for optimization purposes. The limits of quantification, LOQ, obtained by the optimized method were: 2 µg L-1 (Cu), 3 µg L-1 (Cr), 1 µg L-1 (Mn), and 10 µg L-1 (Pb). The addition/recovery experiments had a mean accuracy of: (Cu) 99 ± 7%; 110 ± 8% (Cr); 95 ± 9% (Mn), and 96 ± 11% (Pb). The average soluble fractions of PM2.5 incubated in artificial lysosomal fluid (ALF) for 1 h were: 1.2 ± 0.01 ng m-3 Cu, 0.4 ± 0.01 ng m-3 Cr, 0.6 ± 0.01 ng m-3 Mn, and 4.8 ± 0.03 ng m-3 Pb. Using historical elemental averages of PM2.5 in Curitiba (Cu 3.3 ng m-3, Cr 2.1 ng m-3, Mn 6.1 ng m-3, Pb 21 ng m-3), the percentage bioaccessibility were determined to be Cu 38%, Cr 20%, Mn 10%, and Pb 23%. The elemental values of the atmospheric soluble fraction of Cu, Cr, and Mn were below the inhalation risk concentrations. However, for Pb, the atmospheric soluble fraction exceeded the inhalation unit risk of 0.012 ng m-3. This robust and straightforward GF AAS method is pivotal for low and middle-income countries were most air pollution adverse effects occur and established lower-cost technologies are likely unavailable.

Analysis of indoor gaseous formic and acetic acid, using radial diffusive samplers.

A diffusive sampling method for the determination of gaseous acetic and formic acids, using a radial symmetry diffusive sampler, has been optimised for a 7-day exposure time in this study. Sampling rate determinations were performed on data obtained from a dynamic exposure chamber, simulating the indoor conditions of an empty, closed, room, at room temperature and minimal wind speed. Analysis has been performed by means of ion chromatography. The sampling rates for formic acid concentrations of 128 microg m(-3) and 1248 microg m(-3) were determined to be 91.2 +/- 3.9 ml min(-1) and 111.6 +/- 2.8 ml min(-1), respectively. The acetic acid sampling rate was independent of the concentration in the range 160 microg m(-3)-1564 microg m(-3), and amounted to 97.3 +/- 3.1 ml min(-1). Experimentally determined sampling rates showed deviations of 3% for acetic acid, and 3-21% for formic acid, in relation to theoretically derived values. The blank values were as low as 1.69 +/- 0.07 microg for formic acid and 1.21 +/- 0.14 microg for acetic acid, and detection limits lower than 0.5 microg m(-3) could be achieved, which is an improvement of 98-99% compared to previously validated diffusive sampling methods. This study describes the first step of an extended validation program in which the applicability of these types of samplers for the measurement of organic acids will be validated and optimised for the environmental conditions typical for museum showcases.

The influence that different urban development models has on PM2.5 elemental and bioaccessible profiles.

Limited studies have reported on in-vitro analysis of PM2.5 but as far as the authors are aware, bioaccessibility of PM2.5 in artificial lysosomal fluid (ALF) has not been linked to urban development models before. The Brazilian cities Manaus (Amazon) and Curitiba (South region) have different geographical locations, climates, and urban development strategies. Manaus drives its industrialization using the free trade zone policy and Curitiba adopted a services centered economy driven by sustainability. Therefore, these two cities were used to illustrate the influence that these different models have on PM2.5 in vitro profile. We compared PM2.5 mass concentrations and the average total elemental and bioaccessible profiles for Cu, Cr, Mn, and Pb. The total average elemental concentrations followed Mn > Pb > Cu > Cr in Manaus and Pb > Mn > Cu > Cr in Curitiba. Mn had the lowest solubility while Cu showed the highest bioaccessibility (100%) and was significantly higher in Curitiba than Manaus. Cr and Pb had higher bioaccessibility in Manaus than Curitiba. Despite similar mass concentrations, the public health risk in Manaus was higher than in Curitiba indicating that the free trade zone had a profound effect on the emission levels and sources of airborne PM. These findings illustrate the importance of adopting sustainable air quality strategies in urban planning.

Particulate matter analysis at elementary schools in Curitiba, Brazil.

The particulate matter indoors and outdoors of the classrooms at two schools in Curitiba, Brazil, was characterised in order to assess the indoor air quality. Information concerning the bulk composition was provided by energy-dispersive x-ray fluorescence (EDXRF). From the calculated indoor/outdoor ratios and the enrichment factors it was observed that S-, Cl- and Zn-rich particles are of concern in the indoor environment. In the present research, the chemical compositions of individual particles were quantitatively elucidated, including low-Z components like C, N and O, as well as higher-Z elements, using automated electron probe microanalysis low Z EPMA. Samples were further analysed for chemical and morphological aspects, determining the particle size distribution and classifying them according to elemental composition associations. Five classes were identified based on major elemental concentrations: aluminosilicate, soot, organic, calcium carbonate and iron-rich particles. The majority of the respirable particulate matter found inside of the classroom was composed of soot, biogenic and aluminosilicate particles. In view of the chemical composition and size distribution of the aerosol particles, local deposition efficiencies in the human respiratory system were calculated revealing the deposition of soot at alveolar level. The results showed that on average 42% of coarse particles are deposited at the extrathoracic level, whereas 24% are deposited at the pulmonary region. The fine fraction showed a deposition rate of approximately 18% for both deposition levels.

Human exposure to hydrogen sulphide concentrations near wastewater treatment plants.

The hydrogen sulphide (H2S) levels from wastewater treatment plants (WWTPs) in Curitiba, Brazil have been quantified for the first time. H2S generated by anaerobic decomposition of organic matter in WWTPs is a cause for concern because it is an air pollutant, which can cause eye and respiratory irritation, headaches, and nausea. Considering the requirement for WWTPs in all communities, it is necessary to assess the concentrations and effects of gases such as H2S on populations living and/or working near WWTPs. The primary objective of this study was to evaluate the indoor and outdoor concentration of H2S in the neighbourhood of two WWTPs located in Curitiba, as well as its human health impacts. Between August 2013 and March 2014 eight sampling campaigns were performed using passive samplers and the analyses were carried out by spectrophotometry, presenting mean concentrations ranging from 0.14 to 32µgm-3. Eleven points at WWTP-A reported H2S average concentrations above the WHO recommendation of 10µgm-3, and 15 points above the US EPA guideline of 2µgm-3. At WWTP-B the H2S concentration was above US EPA guideline at all the sampling points. The I/O ratio on the different sampling sites showed accumulation of indoor H2S in some instances and result in exacerbating the exposure of the residents. The highest H2S concentrations were recorded during the summer in houses located closest to the sewage treatment stations, and towards the main wind direction, showing the importance of these factors when planning a WWTP. Lifetime risk assessments of hydrogen sulphide exposure showed a significant non-carcinogenic adverse health risk for local residents and workers, especially those close to anaerobic WWTPs. The data indicated that WWTPs operated under these conditions should be recognized as a significant air pollution source, putting local populations at risk.

Polycyclic Aromatic Hydrocarbons (PAHs) and nitrated analogs associated to particulate matter emission from a Euro V-SCR engine fuelled with diesel/biodiesel blends.

Among the new technologies developed for the heavy-duty fleet, the use of Selective Catalytic Reduction (SCR) aftertreatment system in standard Diesel engines associated with biodiesel/diesel mixtures is an alternative in use to control the legislated pollutants emission. Nevertheless, there is an absence of knowledge about the synergic behaviour of these devices and biodiesel blends regarding the emissions of unregulated substances as the Polycyclic Aromatic Hydrocarbons (PAHs) and Nitro-PAHs, both recognized for their carcinogenic and mutagenic effects on humans. Therefore, the goal of this study is the quantification of PAHs and Nitro-PAHs present to total particulate matter (PM) emitted from the Euro V engine fuelled with ultra-low sulphur diesel and soybean biodiesel in different percentages, B5 and B20. PM sampling was performed using a Euro V - SCR engine operating in European Stationary Cycle (ESC). The PAHs and Nitro-PAHs were extracted from PM using an Accelerated Solvent Extractor and quantified by GC-MS. The results indicated that the use of SCR and the largest fraction of biodiesel studied may suppress the emission of total PAHs. The Toxic Equivalent (TEQ) was lower when using 20% biodiesel, in comparison with 5% biodiesel on the SCR system, reaffirming the low toxicity emission using higher percentage biodiesel. The data also reveal that use of SCR, on its own, suppress the Nitro-PAHs compounds. In general, the use of larger fractions of biodiesel (B20) coupled with the SCR aftertreatment showed the lowest PAHs and Nitro-PAHs emissions, meaning lower toxicity and, consequently, a potential lower risk to human health. From the emission point of view, the results of this work also demonstrated the viability of the Biodiesel programs, in combination with the SCR systems, which does not require any engine adaptation and is an economical alternative for the countries (Brazil, China, Russia, India) that have not adopted Euro VI emission standards.