A modification of the electromigration device and modelling methods for diffusion and sorption studies of radionuclides in intact crystalline rocks.

To determine the diffusion and sorption properties of radionuclides in intact crystalline rocks, a new electromigration device was built and tested by running with I- and Se(IV) ions. By introducing a potentiostat to impose a constant voltage over the studied rock sample, the electromigration device can give more stable and accurate experimental results than those from the traditional electromigration devices. In addition, the variation in the pH of the background electrolytes was minimised by adding a small amount of NaHCO3 as buffers. To interpret the experimental results with more confidence, an advection-dispersion model was also developed in this study, which accounts for the most important mechanisms governing ionic transport in the electromigration experiments. Data analysis of the breakthrough curves by the advection-dispersion model, instead of the traditional ideal plug-flow model, suggest that the effective diffusivities of I- and Se(IV) are (1.15 ± 0.06) × 10-13 m2/s and (3.50 ± 0.86) × 10-14 m2/s, respectively. The results also show that I- is more mobile than Se(IV) ions when migrating through the same intact rock sample and that their sorption properties are almost identical.

Sorption of selenium species onto phlogopite and calcite surfaces: DFT studies.

Sorption of Se(IV) and Se(VI) species onto Mg-rich biotite (phlogopite) and calcite surfaces was investigated using molecular modelling techniques. A CASTEP code implemented into Materials Studio was used to calculate the periodic systems, site densities and site types on the phlogopite and calcite surfaces. According to the results, the Se oxyanions attach to both edge and basal surfaces of phlogopite via an oxygen atom. However, calculated sorption energies indicate that surface complexation reactions via hydrogen bonding happen on the edge surfaces of phlogopite while cation exchange reactions happen on the basal surfaces of phlogopite. These reactions occur on the so-called weak sites according to the PHREEQC modelling. On the calcite surface, only cation exchange reactions are possible, and only for neutral Se species which do not occur in low saline groundwater conditions with pH 8-10. Biotite which is an abundant mineral in crystalline rock works fairly well as a sorbent but calcite which often exists on fracture surfaces of bedrock does not act as a sorbent for Se species.

Molecular Layer Deposition Using Ring-Opening Reactions: Molecular Modeling of the Film Growth and the Effects of Hydrogen Peroxide.

Novel coating materials are constantly needed for current and future applications in the area of microelectronics, biocompatible materials, and energy-related devices. Molecular layer deposition (MLD) is answering this cry and is an increasingly important coating method for organic and hybrid organic-inorganic thin films. In this study, we have focused on hybrid inorganic-organic coatings, based on trimethylaluminum, monofunctional aromatic precursors, and ring-opening reactions with ozone. We present the MLD processes, where the films are produced with trimethylaluminum, one of the three aromatic precursors (phenol, 3-(trifluoromethyl)phenol, and 2-fluoro-4-(trifluoromethyl)benzaldehyde), ozone, and the fourth precursor, hydrogen peroxide. According to the in situ Fourier-transform infrared spectroscopy measurements, the hydrogen peroxide reacts with the surface carboxylic acid group, forming a peroxyacid structure (C(O)-O-OH), in the case of all three processes. In addition, molecular modeling for the processes with three different aromatic precursors was carried out. When combining these modeling results with the experimental research data, new interesting aspects of the film growth, reactions, and properties are exploited.

Using a low melting solvent mixture to extract value from wood biomass.

Green chemistry, sustainability and eco-efficiency are guiding the development of the next generation of industrial chemical processes. The use of non-edible lignocellulosic biomass as a source of chemicals and fuels has recently raised interest due to the need for an alternative to fossil resources. Valorisation mainly focuses on cellulose, which has been used for various industrial scale applications for decades. However, creating an economically more viable value chain would require the exploitation of the other main components, hemicellulose and lignin. Here, we present a new low melting mixture composition based in boric acid and choline chloride, and demonstrate its efficiency in the fractionation of wood-based biomass for the production of non-condensed lignin, suitable for further use in the search for sustainable industrial applications, and for the selective conversion of hemicelluloses into valuable platform chemicals.