RESUMO
Trehalase is an important enzyme in the metabolic cascades of many organisms, catalysing the hydrolysis of the disaccharide trehalose. Herein we describe the first examples of fluorometric nanoprobes for detection of trehalase, based on trehalose-functionalised quantum dots (QDs). QDs cross-linked with trehalose form aggregates, which are released upon enzymatic cleavage of the trehalose glycosidic bond proportionally to the enzyme concentration, offering a unique and efficient approach for specific sensing of this biologically important enzyme.
Assuntos
Pontos Quânticos , Trealose , Trealose/química , Trealase/química , Trealase/metabolismo , Dissacarídeos/metabolismoRESUMO
Recent developments in nanoscience and nanotechnology significantly help improve the properties of traditional materials. A striking example of this is the formation of hybrid nanostructures based on nanoparticles and photosensitizer molecules, the potential range of applications of which extends from photovoltaics to biomedicine. However, the creation of new and effective hybrid nanomaterials of this form inevitably entails new challenges, one of which is a common and critical problem of aggregation of both nanoparticles and photosensitizer molecules. Therefore, a fundamental challenge is to determine the presence of these aggregates, which will produce a significant step toward creating a new generation of materials and devices of broad-spectrum applicability. Here we report on the key role of circular dichroism spectroscopy as a tool to detect the formation of nonluminescent aggregates of chlorin e6, a second-generation photosensitizer, in a hybrid nanostructure with ZnS:Mn quantum dots. These aggregates are active acceptors of photoexcitation energy from quantum dots and limit the photophysical properties of the whole nanostructure. It has been established that circular dichroism spectroscopy reveals the presence of nonluminescent molecule aggregates at chlorin e6 concentrations of â¼10-6 mol/L, which compares very favorably to absorption spectroscopy which does not show any direct indications of aggregation up to â¼10-5 mol/L. This result demonstrates the promise and importance of using circular dichroism spectroscopy in the study of organic/inorganic hybrid nanostructures.
RESUMO
A new class of chiral nanoparticles is of great interest not only for nanotechnology, but also for many other fields of scientific endeavor. Normally the chirality in semiconductor nanocrystals is induced by the initial presence of chiral ligands/stabilizer molecules. Here we report intrinsic chirality of ZnS coated CdSe quantum dots (QDs) and quantum rods (QRs) stabilized by achiral ligands. As-prepared ensembles of these nanocrystals have been found to be a racemic mixture of d- and l-nanocrystals which also includes a portion of nonchiral nanocrystals and so in total the solution does not show a circular dichroism (CD) signal. We have developed a new enantioselective phase transfer technique to separate chiral nanocrystals using an appropriate chiral ligand and obtain optically active ensembles of CdSe/ZnS QDs and QRs. After enantioselective phase transfer, the nanocrystals isolated in organic phase, still capped with achiral ligands, now display circular dichroism (CD). We propose that the intrinsic chirality of CdSe/ZnS nanocrystals is caused by the presence of naturally occurring chiral defects.
RESUMO
In recent years, extensive research efforts have been dedicated to the investigation of CdSe/CdS-based quantum-confined nanostructures, driven by their distinctive properties. The morphologies of these nanostructures have been shown to directly affect their properties, an area which has proven to be an important field of study. Herein, we report a new morphology of CdSe/CdS core-shell heterostructures in the form of a 'nanonail' - a modified nanorod-like morphology, in which a distinctive triangular head can be observed at one end of the structure. In-depth studies of this morphology reveal a material with tuneable rod length and width, as well as exceptional photoluminescent properties. Following this, we have demonstrated the ability to induce chiroptical activity via ligand exchange, revealing the important role of the specific morphology, shell thickness and chiral ligand concentration in the effect of ligand induced chirality. In addition, the cellular uptake and cytotoxicity of obtained chiral nanostructures were evaluated on human lung-derived A549 cancer cells, revealing a significant enantioselectivity in biological activity. Finally, analysis on monolayers of the material demonstrate the complete absence of FRET processes. Overall, this CdSe/CdS heterostructure is another tuneable morphology of a very important nanomaterial, one which shows great advantages and a range of potential applications.
RESUMO
The development of multimodal nano- and micro-structures has become an increasingly popular area of research in recent years. In particular, the combination of two or more desirable properties within a single structure opens multiple opportunities from biomedicine, sensing, and catalysis, to a variety of optical applications. Here, for the first time, we report the synthesis and characterization of multimodal chiroptically active CaCO3 nanocomposites. These composites have been prepared by a modified microemulsion method in the presence of an amino acid (cysteine). Following this, additional modalities have been introduced by loading the composites with luminescent nanoparticles or doping with Eu3+ ions. The luminescent composites have been produced by the incorporation of CuInZnS/ZnS or CdSe@ZnS/ZnS core/shell quantum dots, or via doping with trivalent europium. In this manner, we have produced chiroptically active composites with orange, green, and red luminescence. Overall, this work demonstrates the unique advantage and potential of our approach and new class of chiroptically active CaCO3 nanocomposites, which display tunable functionality to specific requirements via the incorporation of desired ions, nanoparticles, and chirality of the structure.
RESUMO
Copper based ternary and quaternary quantum confined nanostructures have attracted huge attention over recent years due to their potential applications in photonics, photovoltaics, imaging, sensing and other areas. However, anisotropic nanoheterostructures of this type are still poorly explored to date, despite numerous predictions of the distinctive optical properties of these highly fluorescent heavy metal free nanostructures. Here, we report new fluorescent multicomponent Cu-In-(Zn)-S/ZnS nanoheterostructures with a unique anisotropic "ice-cream cone" like morphology. These nanostructures have been prepared with a seeded growth technique and exhibit distinct photophysical properties with maximum emission in the visible range (≈ 640 nm) and long photoluminescence lifetimes (τaverage ≥ 300 ns). In depth time interval studies have been carried out to better understand the step by step growth mechanism of this distinct "ice-cream cone" like geometry. We have demonstrated that the crystal structure evolution from the zinc blende Cu-In-S core to the wurtzite "ice cream cone" like Cu-In-(Zn)-S/ZnS nanocrystals plays a key role in the origin of this morphology. This research opens new possibilities to produce unique fluorescent Cu-based multicomponent anisotropic heteronanostructures, while also offering a distinctive insight into the design of bespoke nanostructures, which could find a range of potential applications.
RESUMO
Chiral semiconductor quantum dots have recently received broad attention due to their promising application in several fields such as sensing and photonics. The extensive work in the last few years was focused on the observation of the chiroptical properties in binary Cd based systems. Herein, we report on the first evidence of ligand-induced chirality in silver indium sulfide semiconductor quantum dots. Ternary disulfide quantum dots are of great interest due to their remarkable optical properties and low toxicity. Non-stoichiometric silver indium sulfide quantum dots were produced via a room temperature coprecipitation in water, in the presence of cysteine as a capping agent. The obtained nanocrystals show a notable photoluminescence quantum yield of 0.24 in water dispersions. Several critical aspects of the nanocrystal growth and chemico-physical characterization, and the optimisation of the surface passivation by the chiral ligand in order to optimize the nanoparticle chirality are thoroughly investigated. Optical spectroscopy methods such as circular dichroism and luminescence as well as nuclear magnetic resonance techniques are exploited to analyze the coordination processes leading to the formation of the ligand-nanocrystal chiral interface. This study highlights the dynamic nature of the interaction between the nanocrystal surface and the chiral ligand and clarifies some fundamental aspects for the transfer and optimization of the chiroptical properties.
RESUMO
Boron nitride (BN) based 2D nanomaterials are an emerging class of materials for the development of new membranes for nanofiltration applications. Here, we report the preparation, characterisation and testing of highly promising nanofiltration membranes produced from partially oxidised BN (BNOx) 2D nanosheets. In our work, the partial oxidation of BN was successfully achieved by heating the bulk h-BN powder in air at 1000 °C, resulting in BNOx product. The characterisation of the sample showed the presence of B-OH groups corresponding to the partial oxidisation of the BN. The BNOx material was then exfoliated in water and used to produce membranes, using vacuum filtration. These membranes were characterised using electron microscopy, BET and mercury porosimetry techniques. The membranes have also been tested in water purification and removal of several typical water-soluble dyes, demonstrating outstanding retention values close to 100%. We believe that this research opens up new opportunities for further production, as well as chemical functionalisation and modification of membranes for nanofiltration and separation technologies.
RESUMO
In recent years, nanotechnology-based approaches have resulted in the development of new alternative sustainable technologies for water purification. Two-dimensional (2D) nanomaterials are an emerging class of materials for nanofiltration membranes. In this work, we report the production, characterisation and testing of a promising nanofiltration membrane made from water-exfoliated boron nitride (BN) 2D nanosheets. The membranes have been tested for water purification and removal of typical water-soluble dyes such as methyl orange, methylene blue and Evans blue, with the water-exfoliated BN membranes achieving retention values close to 100%. In addition, we compared the performance of membranes made from water-exfoliated BN with those produced from BN using sonication-assisted liquid exfoliation in selected organic solvents such as 2-propanol and N-methyl-2-pyrrolidone. It was found that membranes from the water-exfoliated BN showed superior performance. We believe this research opens up a unique opportunity for the development of new high-performance environmentally friendly membranes for nanofiltration and new sustainable separation technologies.
RESUMO
Multicomponent quantum nanostructures have attracted significant attention due to their potential applications in photovoltaics, optoelectronics and bioimaging. However, the preparation of anisotropic quaternary nanoheterostructures such as Cu-In-Zn-S(Se) (CIZS and CIZSe) is still very poorly explored and understood. Here, we report the synthesis and studies of NIR emissive CIZSe/CIZS/ZnS core/shell/shell nanoheterostructures with a unique hetero-nanonail (HNN) morphology. In our approach, wurtzite (WZ) CIZSe/CIZS core/shell QDs have been prepared by depositing a CIZS shell onto a previously synthesized chalcopyrite CIZSe QD core using a seeded growth technique. Following careful control of the ZnS shell growth resulted in the formation of the distinct nail-like CIZSe/CIZS/ZnS nanoheterostructure, where the CIZSe/CIZS core/shell QD is located near the "head" of the nail. The emission in the NIR region of the CIZSe/CIZS/ZnS nanocrystals is assigned to the CIZSe/CIZS core/shell quantum nanostructure. The CIZSe/CIZS/ZnS HNNs are particularly interesting due to a range of potential applications including bioimaging, biosensing, energy harvesting and NIR photodetectors. Finally, we also report the successful controlled growth of gold nanoparticles on the surface of the CIZSe/CIZS/ZnS nanonail-like heterostructure and the investigation of the resulting multimodal nanocomposites.
RESUMO
Hybrid nanomaterials based on graphene and PbS quantum dots (QDs) have demonstrated promising applications in optoelectronics. However, the formation of high-quality large-area hybrid films remains technologically challenging. Here, we demonstrate that ligand-assisted self-organization of covalently bonded PbS QDs and reduced graphene oxide (rGO) can be utilized for the formation of highly uniform monolayers. After the post-deposition ligand exchange, these films demonstrated high conductivity and photoresponse. The obtained films demonstrate a remarkable improvement in morphology and charge transport compared to those obtained by the spin-coating method. It is expected that these materials might find a range of applications in photovoltaics and optoelectronics.
RESUMO
This review summaries the optical properties, recent progress in synthesis, and a range of applications of luminescent Cu-based ternary or quaternary quantum dots (QDs). We first present the unique optical properties of the Cu-based multicomponent QDs, regarding their emission mechanism, high photoluminescent quantum yields (PLQYs), size-dependent bandgap, composition-dependent bandgap, broad emission range, large Stokes' shift, and long photoluminescent (PL) lifetimes. Huge progress has taken place in this area over the past years, via detailed experimenting and modelling, giving a much more complete understanding of these nanomaterials and enabling the means to control and therefore take full advantage of their important properties. We then fully explore the techniques to prepare the various types of Cu-based ternary or quaternary QDs (including anisotropic nanocrystals (NCs), polytypic NCs, and spherical, nanorod and tetrapod core/shell heterostructures) are introduced in subsequent sections. To date, various strategies have been employed to understand and control the QDs distinct and new morphologies, with the recent development of Cu-based nanorod and tetrapod structure synthesis highlighted. Next, we summarize a series of applications of these luminescent Cu-based anisotropic and core/shell heterostructures, covering luminescent solar concentrators (LSCs), bioimaging and light emitting diodes (LEDs). Finally, we provide perspectives on the overall current status, challenges, and future directions in this field. The confluence of advances in the synthesis, properties, and applications of these Cu-based QDs presents an important opportunity to a wide-range of fields and this piece gives the reader the knowledge to grasp these exciting developments.
RESUMO
Electrophoretic deposition (EPD) is an emerging technique in nanomaterial-based device fabrication. Here, we report an in-depth study of this approach as a means to deposit colloidal quantum dots (CQDs), in a range of solvents. For the first time, we report the significant improvement of EPD performance via the use of dichloromethane (DCM) for deposition of CQDs, producing a corresponding CQD-TiO2 composite with a near 10-fold increase in quantum dot loading relative to more commonly used solvents such as chloroform or toluene. We propose this effect is due to the higher dielectric constant of the solvent relative to more commonly used and therefore the stronger effect of EPD in this medium, though there remains the possibility that changes in zeta potential may also play an important role. In addition, this solvent choice enables the true universality of QD EPD to be demonstrated, via the sensitization of porous TiO2 electrodes with a range of ligand capped CdSe QDs and a range of group II-VI CQDs including CdS, CdSe/CdS, CdS/CdSe and CdTe/CdSe, and group IV-VI PbS QDs.
RESUMO
Chiroptically active fluorescent semiconductor nanocrystals, quantum dots (QDs), are of high interest from a theoretical and technological point of view, because they are promising candidates for a range of potential applications. Optical activity can be induced in QDs by capping them with chiral molecules, resulting in circular dichroism (CD) signals in the range of the QD ultraviolet-visible (UV-vis) absorption. However, the effects of the chiral ligand concentration and binding modes on the chiroptical properties of QDs are still poorly understood. In the present study, we report the strong influence of the concentration of a chiral amino acid (cysteine) on its binding modes upon the surface of CdSe/CdS QDs, resulting in varying QD chiroptical activity and corresponding CD signals. Importantly, we demonstrate that the increase of cysteine concentration is accompanied by the growth of the QD CD intensity, reaching a certain critical point, after which it starts to decrease. The intensity of the CD signal varies by almost an order of magnitude across this range. Nuclear magnetic resonance and Fourier transform infrared data, supported by density functional theory calculations, reveal a change in the binding mode of cysteine molecules from tridentate to bidentate when going from low to high concentrations, which results in a change in the CD intensity. Hence, we conclude that the chiroptical properties of QDs are dependent on the concentration and binding modes of the capping chiral ligands. These findings are very important for understanding chiroptical phenomena at the nanoscale and for the design of advanced optically active nanomaterials.
RESUMO
Considerable attention has been drawn to the lead halide perovskites (LHPs) because of their outstanding optoelectronic characteristics. LHP nanosheets (NSs) grown from single crystalline lead halide possess advantages in device applications as they provide the possibility for control over morphology, composition, and crystallinity. Here, free-standing lead bromide (PbBr2) single-crystalline NSs with sizes up to one centimeter are synthesized from solution. These NSs can be converted to LHP while maintaining the NS morphology. We demonstrate that these perovskite NSs can be processed directly for fabrication of photodetector and laser arrays on a large scale. This strategy will allow high-yield synthesis of large-size perovskite NSs for functional devices in an integrated photonics platform.
RESUMO
Two-dimensional (2D) nanomaterials have been intensively investigated due to their interesting properties and range of potential applications. Although most research has focused on graphene, atomic layered transition metal dichalcogenides (TMDs) and particularly MoS2 have gathered much deserved attention recently. Here, we report the induction of chirality into 2D chiral nanomaterials by carrying out liquid exfoliation of MoS2 in the presence of chiral ligands (cysteine and penicillamine) in water. This processing resulted in exfoliated chiral 2D MoS2 nanosheets showing strong circular dichroism signals, which were far past the onset of the original chiral ligand signals. Using theoretical modeling, we demonstrated that the chiral nature of MoS2 nanosheets is related to the presence of chiral ligands causing preferential folding of the MoS2 sheets. There was an excellent match between the theoretically calculated and experimental spectra. We believe that, due to their high aspect ratio planar morphology, chiral 2D nanomaterials could offer great opportunities for the development of chiroptical sensors, materials, and devices for valleytronics and other potential applications. In addition, chirality plays a key role in many chemical and biological systems, with chiral molecules and materials critical for the further development of biopharmaceuticals and fine chemicals, and this research therefore should have a strong impact on relevant areas of science and technology such as nanobiotechnology, nanomedicine, and nanotoxicology.
RESUMO
Core/shell quantum dots (QDs) are of high scientific and technological importance as these nanomaterials have found a number of valuable applications. In this paper, we have investigated the dependence of optical activity and photoluminescence upon CdS shell thickness in a range of core-shell structured CdSe/CdS QDs capped with chiral ligands. For our study, five samples of CdSe/CdS were synthesized utilizing successive ion layer adsorption and reaction to vary the thickness of the CdS shell from 0.5 to 2 nm, upon a 2.8 nm diameter CdSe core. Following this, a ligand exchange of the original aliphatic ligands with l- and d-cysteine was carried out, inducing a chiroptical response in these nanostructures. The samples were then characterized using circular dichroism, photoluminescent spectroscopy, and fluorescence lifetime spectroscopy. It has been found that the induced chiroptical response was inversely proportional to the CdS shell thickness and showed a distinct evolution in signal, whereas the photoluminescence of our samples showed a direct relationship to shell thickness. In addition, a detailed study of the influence of annealing time on the optical activity and photoluminescence quantum yield was performed. From our work, we have been able to clearly illustrate the approach and strategies that must be used when designing optimal photoluminescent optically active CdSe/CdS core-shell QDs.
RESUMO
Molecular recognition is one of the most important phenomena in Chemistry and Biology. Here we present a new way of enantiomeric molecular recognition using intrinsically chiral semiconductor nanocrystals as assays. Real-time confocal microscopy studies supported by circular dichroism spectroscopy data and theoretical modelling indicate an ability of left-handed molecules of cysteine and, to a smaller extent, histidine and arginine to discriminate between surfaces of left- and right-handed nanocrystals.
Assuntos
Compostos de Cádmio/química , Cisteína/química , Pontos Quânticos/química , Compostos de Selênio/química , Dicroísmo Circular , EstereoisomerismoRESUMO
Here we report anisotropy of intrinsic chiroptical response in CdSe/CdS quantum dot-in-rod systems. These nanostructures being oriented in an external electric field demonstrate dependence of circular dichroism signal on the orientation of the nanocrystals. The type of circular polarization in these nanostructures correlates with preferential direction of linear polarization, and the degree of circular polarization is the maximal for the first circular dichroism band corresponding to the absorption band edge. We also support our experimental data with a theoretical model. Using this model, we show a direct connection between theoretically derived morphological parameters of twisting in nanocrystals lattices and calculated from experimental data parameters of circular dichroism anisotropy.
RESUMO
In this manuscript, for the first time, we report a combination of electrophoretic and sintering approaches for introducing gold nanoparticles into nanoporous TiO2 films to generate 'hot' electrons resulting in a strong enhancement of photocurrent. The Au-TiO2 nanocomposite material was prepared by the electrophoretic deposition of gold nanoparticles into a porous nanoparticulate titanium dioxide film, creating a photoactive electrode. The composite film demonstrates a significant increase in the short circuit current (I sc) compared to unmodified TiO2 when excited at or close to the plasmon resonance of the gold nanoparticles. Then, we employed a thermal ripening process as a method of increasing the I sc of these electrodes and also as a method of tuning the plasmon peak position, with a high degree of selectivity. Photo-electrochemical investigations revealed that the increase in photocurrent is attributed to the generation and separation of plasmonically generated hot electrons at the gold/TiO2 interface and also the inter-band generation of holes in gold nanoparticles by photons with λ < 520 nm. Theoretical modelling outputs perfectly match our results obtained from photo-physical studies of the processes leading to enhanced photocurrent.