Efficient bioconversion from acid hydrolysate of waste oleaginous yeast biomass after microbial oil extraction to bacterial cellulose by Komagataeibacter xylinus.

Biomass acid hydrolysate of oleaginous yeast Trichosporon cutaneum after microbial oil extraction was applied as substrate for bacterial cellulose (BC) production by Komagataeibacter xylinus (also named as Gluconacetobacter xylinus previously) for the first time. BC was synthesized in static culture for 10 days, and the maximum BC yield (2.9 g/L) was got at the 4th day of fermentation. Most carbon sources in the substrate (glucose, mannose, formic acid, acetic acid) can be utilized by K. xylinus. The highest chemical oxygen demand (COD) removal (40.7 ± 3.0%) was obtained at the 6th day of fermentation, and then the COD increased possibly due to the degradation of BC. The highest BC yield on COD consumption was 38.7 ± 4.0% (w/w), suggesting that this is one efficient bioconversion for BC production. The BC structure was affected little by the substrate by comparison with that generated in classical HS medium using field-emission scanning electron microscope (FE-SEM), Fourier transform infrared, and X-ray diffraction. Overall, this technology can both solve the issue of waste oleaginous yeast biomass and produce valuable biopolymer (BC).

Lumping kinetics of ABE fermentation wastewater treatment by oleaginous yeast Trichosporon cutaneum.

Lumping kinetics models were built for the biological treatment of acetone-butanol-ethanol (ABE) fermentation wastewater by oleaginous yeast Trichosporon cutaneum with different fermentation temperatures. Compared with high temperature (33°C, 306 K) and low temperature (23°C, 296 K), medium temperature (28°C, 301 K) was beneficial for the cell growth and chemical oxygen demand (COD) degradation during the early stage of fermentation but the final yeast biomass and COD removal were influenced little. By lumping method, the materials in the bioconversion network were divided into five lumps (COD, lipid, polysaccharide, other intracellular products, other extracellular products), and the nine rate constants (k1-k9) for the models can well explain the bioconversion laws. The Gibbs free energy (G) for this bioconversion was positive, showing that it cannot happen spontaneous, but the existence of yeast can after the chemical equilibrium and make the bioconversion to be possible. Overall, the possibility of using lumping kinetics for elucidating the laws of materials conversion in the biological treatment of ABE fermentation wastewater by T. cutaneum has been initially proved and this method has great potential for further application.

Efficient Using Durian Shell Hydrolysate as Low-Cost Substrate for Bacterial Cellulose Production by Gluconacetobacter xylinus.

Durian is one important tropical fruit with high nutritional value, but its shell is usually useless and considered as waste. To explore the efficient and high-value utilization of this agricultural and food waste, in this study, durian shell was simply hydrolyzed by dilute sulfuric acid, and the durian shell hydrolysate after detoxification was used for bacterial cellulose (BC) production by Gluconacetobacter xylinus for the first time. BC was synthesized in static culture for 10 days and the highest BC yield (2.67 g/L) was obtained at the 8th day. The typical carbon sources in the substrate including glucose, xylose, formic acid, acetic acid, etc. can be utilized by G. xylinus. The highest chemical oxygen demand (COD) removal (16.40%) was obtained at the 8th day. The highest BC yield on COD consumption and the highest BC yield on sugar consumption were 93.51% and 22.98% (w/w), respectively, suggesting this is one efficient bioconversion for BC production. Durian shell hydrolysate showed small influence on the BC structure by comparison with the structure of BC generated in traditional Hestrin-Schramm medium detected by FE-SEM, FTIR, and XRD. Overall, this technology can both solve the issue of waste durian shell and produce valuable bio-polymer (BC).

Use of elephant grass (Pennisetum purpureum) acid hydrolysate for microbial oil production by Trichosporon cutaneum.

Elephant grass (Pennisetum purpureum) dilute acid hydrolysate contains 34.6 g/L total sugars. The potential of lipid production by oleaginous yeast Trichosporon cutaneum grown on elephant grass acid hydrolysate was investigated for the first time. During the fermentation process on the elephant grass acid hydrolysate, glucose, xylose, and arabinose could be well utilized as carbon sources by T. cutaneum. Interestingly, xylose was almost no use before glucose was consumed completely. This illustrated that simultaneous saccharification of xylose and glucose by T. cutaneum did not occur on elephant grass acid hydrolysate. The highest biomass, lipid content, lipid yield, and lipid coefficient of T. cutaneum were measured after the sixth day of fermentation and were 22.76 g/L, 24.0%, 5.46 g/L, and 16.1%, respectively. Therefore, elephant grass is a promising raw material for microbial oil production by T. cutaneum.

Preparation of Bacterial Cellulose/Inorganic Gel of Bentonite Composite by In Situ Modification.

To evaluate the possibility of Bacterial cellulose/Inorganic Gel of Bentonite (BC/IGB) composite production using in situ method, the BC/IGB composite was successfully produced by in situ modification of BC in both HS medium and corncob hydrolysate. The results showed that the BC/IGB composite obtained in HS medium (one classical medium for BC production) had a higher water holding capacity, but the water retention capacity of the BC/IGB composite obtained in corncob hydrolysate was better. The performance of BC/IGB composite depended on the environment of in situ modification. Using different media showed significant influence on the sugar utilization and BC yield. In addition, BC/IGB composite produced by in situ method was compared with that produced by ex situ method, and the results shows that water holding capacity of BC/IGB composite obtained through in situ method was better. XRD results showed the crystallinity of BC/IGB composite related little to its performance as water absorbent. Overall, in situ modification is appropriate for further production of BC composite and other clay materials.

Anammox and partial denitrification coupling: a review.

As a new wastewater biological nitrogen removal process, anammox and partial denitrification coupling not only plays a significant role in the nitrogen cycle, but also holds high engineering application value. Because anammox and some denitrifying bacteria are coupled under harsh living conditions, certain operating conditions and mechanisms of the coupling process are not clear; thus, it is more difficult to control the process, which is why the process has not been widely applied. This paper analyzes the research focusing on the coupling process in recent years, including anammox and partial denitrification coupling process inhibitors such as nitrogen (NH4 +, NO2 -), organics (toxic and non-toxic organics), and salts. The mechanism of substrate removal in anammox and partial denitrification coupling nitrogen removal is described in detail. Due to the differences in process methods, experimental conditions, and sludge choices between the rapid start-up and stable operation stages of the reactor, there are significant differences in substrate inhibition. Multiple process parameters (such as pH, temperature, dissolved oxygen, redox potential, carbon-to-nitrogen ratio, and sludge) can be adjusted to improve the coupling of anammox and partial denitrification to modify nitrogen removal performance.

Combined "de novo" and "ex novo" lipid fermentation in a mix-medium of corncob acid hydrolysate and soybean oil by Trichosporon dermatis.

BACKGROUND: Microbial oil is one important bio-product for its important function in energy, chemical, and food industry. Finding suitable substrates is one key issue for its industrial application. Both hydrophilic and hydrophobic substrates can be utilized by oleaginous microorganisms with two different bio-pathways ("de novo" lipid fermentation and "ex novo" lipid fermentation). To date, most of the research on lipid fermentation has focused mainly on only one fermentation pathway and little work was carried out on both "de novo" and "ex novo" lipid fermentation simultaneously; thus, the advantages of both lipid fermentation cannot be fulfilled comprehensively. RESULTS: In this study, corncob acid hydrolysate with soybean oil was used as a mix-medium for combined "de novo" and "ex novo" lipid fermentation by oleaginous yeast Trichosporon dermatis. Both hydrophilic and hydrophobic substrates (sugars and soybean oil) in the medium can be utilized simultaneously and efficiently by T. dermatis. Different fermentation modes were compared and the batch mode was the most suitable for the combined fermentation. The influence of soybean oil concentration, inoculum size, and initial pH on the lipid fermentation was evaluated and 20 g/L soybean oil, 5% inoculum size, and initial pH 6.0 were suitable for this bioprocess. By this technology, the lipid composition of extracellular hydrophobic substrate (soybean oil) can be modified. Although adding emulsifier showed little beneficial effect on lipid production, it can modify the intracellular lipid composition of T. dermatis. CONCLUSIONS: The present study proves the potential and possibility of combined "de novo" and "ex novo" lipid fermentation. This technology can use hydrophilic and hydrophobic sustainable bio-resources to generate lipid feedstock for the production of biodiesel or other lipid-based chemical compounds and to treat some special wastes such as oil-containing wastewater.

Semi-pilot Scale Microbial Oil Production by Trichosporon cutaneum Using Medium Containing Corncob Acid Hydrolysate.

In this study, semi-pilot scale microbial oil production by Trichosporon cutaneum using medium containing corncob acid hydrolysate was carried out in a 50-L fermentor. Scale up showed no negative influence on lipid fermentation that no obvious lag phase was observed. Both glucose and xylose could be utilized simultaneously by T. cutaneum, but the utilization rate of xylose was much slower than that of glucose. After 7.6 days of fermentation, the biomass, lipid content, and lipid yield were 21.8 g/L, 53.7 %, and 11.7 g/L, respectively. Also, a high lipid coefficient (lipid yield on sugars consumption) of 26.3 was obtained. Besides microbial oil, polysaccharide was another main product of lipid fermentation that the remaining biomass residue full of polysaccharides after lipid extraction could be one important by-product in future. Overall, this study showed the great potential of industrialization for lipid production by T. cutaneum on low-cost substrates especially for lignocellulosic hydrolysates.

Elucidating the Beneficial Effect of Corncob Acid Hydrolysate Environment on Lipid Fermentation of Trichosporon dermatis by Method of Cell Biology.

In present study, the beneficial effect of corncob acid hydrolysate environment on lipid fermentation of Trichosporon dermatis was elucidated by method of cell biology (mainly using flow cytometry and microscope) for the first time. Propidium iodide (PI) and rhodamine 123 (Rh123) staining showed that corncob acid hydrolysate environment was favorable for the cell membrane integrity and mitochondrial membrane potential of T. dermatis and thus made its lipid fermentation more efficient. Nile red (NR) staining showed that corncob acid hydrolysate environment made the lipid accumulation of T. dermatis slower, but this influence was not serious. Moreover, the cell morphology of T. dermatis elongated in the corncob acid hydrolysate, but the cell morphology changed as elliptical-like during fermentation. Overall, this work offers one simple and effective method to evaluate the influence of lignocellulosic hydrolysates environment on lipid fermentation.

Solvents Production from a Mixture of Glucose and Xylose by Mixed Fermentation of Clostridium acetobutylicum and Saccharomyces cerevisiae.

To overcome the xylose utilization defect in ethanol fermentation by wide-type Saccharomyces cerevisiae and alleviate the carbon catabolite repression (CCR) in acetone-butanol-ethanol (ABE) fermentation by Clostridium acetobutylicum, a novel mixed fermentation of S. cerevisiae and C. acetobutylicum was developed. When S. cerevisiae was inoculated 24 h earlier than C. acetobutylicum CH02, a higher solvents yield was achieved with 0.41 g/g, compared to 0.38 g/g in ABE fermentation, and when S. cerevisiae and C. acetobutylicum CH02 were inoculated simultaneously, a higher productivity was achieved with 0.32 g/L/h, compared to 0.15 g/L/h in ABE fermentation. The total solvents yield was improved by the high ethanol yield from glucose. The CCR in mixed fermentation was alleviated when glucose was utilized quickly by S. cerevisiae, and therefore, the productivity was improved. This study suggests that mixed fermentation is an effective solvents production method from a mixture of glucose and xylose.