Effects of flowable liners on the shrinkage vectors of bulk-fill composites.

OBJECTIVES: This investigation evaluated the effect of flowable liners beneath a composite restoration applied via different methods on the pattern of shrinkage vectors. METHODS: Forty molars were divided into five groups (n = 8), and cylindrical cavities were prepared and bonded with a self-etch adhesive (AdheSe). Tetric EvoCeram Bulk Fill (TBF) was used as the filling material in all cavities. The flowable liners Tetric EvoFlow Bulk Fill (TEF) and SDR were used to line the cavity floor. In gp1-TBF, the flowable composite was not used. TEF was applied in a thin layer in gp2-fl/TEF + TBF and gp3-fl/TEF + TBFincremental. Two flowable composites with a layer thickness of 2 mm were compared in gp4-fl/TEF + TBF and gp5-fl/SDR + TBF. TEF and SDR were mixed with radiolucent glass beads, while air bubbles inherently present in TBF served as markers. Each material application was scanned twice by micro-computed tomography before and after light curing. Scans were subjected to image segmentation for calculation of the shrinkage vectors. RESULTS: The absence of a flowable liner resulted in the greatest shrinkage vectors. A thin flowable liner (gp2-fl/TEF + TBFbulk) resulted in larger overall shrinkage vectors for the whole restoration than a thick flowable liner (gp4-fl/TEF + TBF). A thin flowable liner and incremental application (gp3-fl/TEF + TBFincremental) yielded the smallest shrinkage vectors. SDR yielded slightly smaller shrinkage vectors for the whole restoration than that observed in gp4-fl/TEF + TBF. CONCLUSIONS: Thick flowable liner layers had a more pronounced stress-relieving effect than thin layers regardless of the flowable liner type. CLINICAL RELEVANCE: It is recommended to apply a flowable liner (thin or thick) beneath bulk-fill composites, preferably incrementally.

IgE and allergen-specific immunotherapy-induced IgG4 recognize similar epitopes of Bet v 1, the major allergen of birch pollen.

BACKGROUND: Allergen-specific immunotherapy (AIT) with birch pollen generates Bet v 1-specific immunoglobulin (Ig)G4 which blocks IgE-mediated hypersensitivity mechanisms. Whether IgG4 specific for Bet v 1a competes with IgE for identical epitopes or whether novel epitope specificities of IgG4 antibodies are developed is under debate. OBJECTIVE: We sought to analyze the epitope specificities of IgE and IgG4 antibodies from sera of patients who received AIT. METHODS: 15 sera of patients (13/15 received AIT) with Bet v 1a-specific IgE and IgG4 were analyzed. The structural arrangements of recombinant (r)Bet v 1a and rBet v 1a_11x , modified in five potential epitopes, were analyzed by circular dichroism and nuclear magnetic resonance spectroscopy. IgE binding to Bet v 1 was assessed by ELISA and mediator release assays. Competitive binding of monoclonal antibodies specific for Bet v 1a and serum IgE/IgG4 to rBet v 1a and serum antibody binding to a non-allergenic Bet v 1-type model protein presenting an individual epitope for IgE was analyzed in ELISA and western blot. RESULTS: rBet v 1a_11x had a Bet v 1a - similar secondary and tertiary structure. Monomeric dispersion of rBet v 1a_11x was concentration and buffer-dependent. Up to 1500-fold increase in the EC50 for IgE-mediated mediator release induced by rBet v 1a_11x was determined. The reduction of IgE and IgG4 binding to rBet v 1a_11x was comparable in 67% (10/15) of sera. Bet v 1a-specific monoclonal antibodies inhibited binding of serum IgE and IgG4 to 66.1% and 64.9%, respectively. Serum IgE and IgG4 bound specifically to an individual epitope presented by our model protein in 33% (5/15) of sera. CONCLUSION AND CLINICAL RELEVANCE: Patients receiving AIT develop Bet v 1a-specific IgG4 which competes with IgE for partly identical or largely overlapping epitopes. The similarities of epitopes for IgE and IgG4 might stimulate the development of epitope-specific diagnostics and therapeutics.

The conformational IgE epitope profile of soya bean allergen Gly m 4.

BACKGROUND: Birch pollen-related soya allergy is mediated by Gly m 4. Conformational IgE epitopes of Gly m 4 are unknown. OBJECTIVE: To identify the IgE epitope profile of Gly m 4 in subjects with birch pollen-related soya allergy utilizing an epitope library presented by Gly m 4-type model proteins. METHODS: Sera from patients with (n = 26) and without (n = 19) allergy to soya as determined by oral provocation tests were studied. Specific IgE (Bet v 1/Gly m 4) was determined by ImmunoCAP. A library of 59 non-allergenic Gly m 4-type model proteins harbouring individual and multiple putative epitopes for IgE was tested in IgE binding assays. Primary, secondary and tertiary protein structures were assessed by mass spectrometry, circular dichroism and nuclear magnetic resonance spectroscopy. RESULTS: All subjects were sensitized to Gly m 4 and Bet v 1. Allergen-specific serum IgE levels ranged from 0.94 to > 100 kUA /L. The avidities of serum IgE were 5.06 ng (allergic) and 1.8 ng (tolerant) as determined by EC50 for IgE binding to Gly m 4. 96% (46/48) of the protein variants bound IgE. Model proteins had Gly m 4-type conformation and individual IgE binding clustered in six major surface areas. Gly m 4-specific IgE binding could be inhibited to up to 80% by model proteins harbouring individual IgE binding sites in an epitope-wise equimolar fashion. Receiver operating curve analysis revealed an area under fitted curve of up to 0.88 for model proteins and 0.66 for Gly m 4. CONCLUSION AND CLINICAL RELEVANCE: Serum levels and avidity of Gly m 4-specific IgE do not correlate with clinical reactivity to soya. Six IgE-binding areas, represented by 23 amino acids, account for more than 80% of total IgE binding capacity of Gly m 4. Model proteins may be used for epitope-resolved diagnosis to differentiate birch-soya allergy from clinical tolerance.

Identification of Bacillus anthracis via Raman spectroscopy and chemometric approaches.

Raman micro-spectroscopy was applied to compile a large-scale database of Raman spectra of single Bacillus endospores and to calculate classification functions, which were trained to discriminate between endospores of 66 strains from 13 Bacillus and Bacillus-related species including B. anthracis. The developed two-stage classification system comprising two support vector machines and one linear discriminant analysis classifier was then challenged by a test set of 27 samples to simulate the case of a real-world-scenario, when "unknown samples" are to be identified. In the end, all 27 test set samples including six B. anthracis strains were identified correctly. The samples thereby covered a diverse selection of species within the phylogenetically broad Bacillus genus and also included strains, which were not incorporated in the database before. All of them were correctly identified on the species level with accuracies between 88 and 100%. The sample analysis itself requires no biomass enrichment step prior to the analysis and qualifies the presented Raman spectroscopic approach to be a rapid analysis system in term of Bacillus endospore typing.

Raman spectroscopy-compatible inactivation method for pathogenic endospores.

Micro-Raman spectroscopy is a fast and sensitive tool for the detection, classification, and identification of biological organisms. The vibrational spectrum inherently serves as a fingerprint of the biochemical composition of each bacterium and thus makes identification at the species level, or even the subspecies level, possible. Therefore, microorganisms in areas susceptible to bacterial contamination, e.g., clinical environments or food-processing technology, can be sensed. Within the scope of point-of-care-testing also, detection of intentionally released biosafety level 3 (BSL-3) agents, such as Bacillus anthracis endospores, or their products is attainable. However, no Raman spectroscopy-compatible inactivation method for the notoriously resistant Bacillus endospores has been elaborated so far. In this work we present an inactivation protocol for endospores that permits, on the one hand, sufficient microbial inactivation and, on the other hand, the recording of Raman spectroscopic signatures of single endospores, making species-specific identification by means of highly sophisticated chemometrical methods possible. Several physical and chemical inactivation methods were assessed, and eventually treatment with 20% formaldehyde proved to be superior to the other methods in terms of sporicidal capacity and information conservation in the Raman spectra. The latter fact has been verified by successfully using self-learning machines (such as support vector machines or artificial neural networks) to identify inactivated B. anthracis-related endospores with adequate accuracies within the range of the limited model database employed.

Vibrational spectroscopy--a powerful tool for the rapid identification of microbial cells at the single-cell level.

Rapid microbial detection and identification with a high grade of sensitivity and selectivity is a great and challenging issue in many fields, primarily in clinical diagnosis, pharmaceutical, or food processing technology. The tedious and time-consuming processes of current microbiological approaches call for faster ideally on-line identification techniques. The vibrational spectroscopic techniques IR absorption and Raman spectroscopy are noninvasive methods yielding molecular fingerprint information; thus, allowing for a fast and reliable analysis of complex biological systems such as bacterial or yeast cells. In this short review, we discuss recent vibrational spectroscopic advances in microbial identification of yeast and bacterial cells for bulk environment and single-cell analysis. IR absorption spectroscopy enables a bulk analysis whereas micro-Raman-spectroscopy with excitation in the near infrared or visible range has the potential for the analysis of single bacterial and yeast cells. The inherently weak Raman signal can be increased up to several orders of magnitude by applying Raman signal enhancement methods such as UV-resonance Raman spectroscopy with excitation in the deep UV region, surface enhanced Raman scattering, or tip-enhanced Raman scattering.

Structure of the equine infectious anemia virus Tat protein.

Trans-activator (Tat) proteins regulate the transcription of lentiviral DNA in the host cell genome. These RNA binding proteins participate in the life cycle of all known lentiviruses, such as the human immunodeficiency viruses (HIV) or the equine infectious anemia virus (EIAV). The consensus RNA binding motifs [the trans-activation responsive element (TAR)] of HIV-1 as well as EIAV Tat proteins are well characterized. The structure of the 75-amino acid EIAV Tat protein in solution was determined by two- and three-dimensional nuclear magnetic resonance methods and molecular dynamics calculations. The protein structure exhibits a well-defined hydrophobic core of 15 amino acids that serves as a scaffold for two flexible domains corresponding to the NH2- and COOH-terminal regions. The core region is a strictly conserved sequence region among the known Tat proteins. The structural data can be used to explain several of the observed features of Tat proteins.

1H-NMR studies of the natriuretic peptide urodilatin: sequence-specific resonance assignment.

The recently discovered 32 amino-acid natriuretic peptide urodilatin was chemically synthesized and subjected to two-dimensional proton nuclear magnetic resonance (NMR) spectroscopy studies in aqueous solution in order to determine the structural state of urodilatin. In contrast to earlier studies on very closely related peptides, such as cardiodilatin (CDD/ANP-99-126) and brain natriuretic peptide (BNP), spectra of urodilatin were extremely well resolved even in millimolar concentration in H2O so that the complete sequence specific resonance assignments could be achieved. No long range NOEs could be detected, except between residues close to the single cystine bond. This leads to the conclusion that urodilatin in aqueous solution is a random coil peptide with the exception of the region around the cystine bond.

The structure of iron-sulfur proteins.

Ferredoxins are a group of iron-sulfur proteins for which a wealth of structural and mutational data have recently become available. Previously unknown structures of ferredoxins which are adapted to halophilic, acidophilic or hyperthermophilic environments and new cysteine patterns for cluster ligation and non-cysteine cluster ligation have been described. Site-directed mutagenesis experiments have given insight into factors that influence the geometry, stability, redox potential, electronic properties and electron-transfer reactivity of iron-sulfur clusters.

Assignment of aromatic spin systems in the 1H nuclear magnetic resonance spectrum of adenylate kinase.

A combination of selective spin decoupling, two-dimensional double quantum spectroscopy, correlated spectroscopy (COSY), and pH titration experiments brought about the assignment of all tyrosyl spin systems and completed the assignment of the histidyl spin systems in porcine adenylate kinase. In the detection of the tyrosyl spin systems it proved to be advantageous to resort to the COSY method rather than to two-dimensional double quantum spectroscopy. In the titration experiments, His189 revealed a second apparent pK value at pH 8.3, which is explained by deprotonation of the adjacent residue Cys187. None of the seven tyrosyl side-chains shows any evidence for deprotonation up to the point of denaturation of the protein, which took place around pH 10.

Proton-nuclear magnetic resonance studies of the aromatic spin systems of Escherichia coli adenylate kinase.

Escherichia coli adenylate kinase has a very well resolved proton nuclear magnetic resonance spectrum in the region containing signals from aromatic amino acid side-chains. We found that the protein is structurally stable over a wide pH range and renatures spontaneously after acidic as well as basic denaturation. Only one out of the three histidyl imidazole rings titrates on changing the pH and has a pka value of 7.6. Two-dimensional nuclear magnetic resonance spectroscopy studies allowed use to identify most of the enzyme's aromatic spin systems, and by investigation of a mutant protein we were able to assign the aromatic part of the spin system of Tyr24 unambiguously.

Generation of a non-prolyl cis peptide bond in ribonuclease T1.

The cis conformation of the 38-39 peptide bond of ribonuclease T1 is retained after the replacement of cis Pro39 by an alanine residue. This conformation is demonstrated by the presence of a NOESY cross-peak in the NMR spectrum between the C alpha protons of Tyr38 and Ala39 in the Pro39-->Ala variant. The presence of this non-prolyl cis peptide bond explains the retention of the catalytic activity, the strong decrease in stability and the changes in the folding mechanism that were observed after the Pro39-->Ala mutation in ribonuclease T1. We suggest that a cis peptide bond is retained in a protein after the substitution of a cis proline at positions, where a trans bond would destabilize the protein more strongly than a non-prolyl peptide bond in the energetically unfavourable cis conformation.

Structural studies of HIV-1 Tat protein.

Tat (trans-activator) proteins are early RNA binding proteins regulating lentiviral transcription. These proteins are necessary components in the life cycle of all known lentiviruses, such as the human immunodeficiency viruses (HIV) or the equine infectious anemia virus (EIAV). Tat proteins are thus ideal targets for drugs intervening with lentiviral growth. The consensus RNA binding motif (TAR, trans-activation responsive element) of HIV-1 is well characterized. Structural features of the 86 amino acid HIV-1, Zaire 2 isolate (HV1Z2) Tat protein in solution were determined by two dimensional (2D) nuclear magnetic resonance (NMR) methods and molecular dynamics (MD) calculations. In general, sequence regions corresponded to structural domains of the protein. It exhibited a hydrophobic core of 16 amino acids and a glutamine-rich domain of 17 amino acids. Part of the NH2 terminus, Val4 to Pro14, was sandwiched between these domains. Two highly flexible domains corresponded to a cysteine-rich and a basic sequence region. The 16 amino acid sequence of the core region is strictly conserved among the known Tat proteins, and the three-dimensional fold of these amino acids of HV1Z2 Tat protein was highly similar to the structure of the corresponding EIAV Tat domain. HV1Z2 Tat protein contained a well defined COOH-terminal Arg-Gly-Asp (RGD) loop similar to the recently determined decorsin RGD loop.

Equine infectious anemia virus transactivator is a homeodomain-type protein.

Lentiviral transactivator (Tat) proteins are essential for viral replication. Tat proteins of human immunodeficiency virus type 1 and bovine immunodeficiency virus form complexes with their respective RNA targets (Tat responsive element, TAR), and specific binding of the equine anemia virus (EIAV) Tat protein to a target TAR RNA is suggested by mutational analysis of the TAR RNA. Structural data on equine infectious anemia virus Tat protein reveal a helix-loop-helix-turn-helix limit structure very similar to homeobox domains that are known to bind specifically to DNA. Here we report results of gel-shift and footprinting analysis as well as fluorescence and nuclear magnetic resonance spectroscopy experiments that clearly show that EIAV Tat protein binds to DNA specifically at the long terminal repeat Pu.1 (GTTCCTGTTTT) and AP-1 (TGACGCG) sites, and thus suggest a common mechanism for the action of some of the known lentiviral Tat proteins via the AP-1 initiator site. Complex formation with DNA induces specific shifts of the proton NMR resonances originating from amino acids in the core and basic domains of the protein.

Solution structure of a zinc substituted eukaryotic rubredoxin from the cryptomonad alga Guillardia theta.

The rubredoxin from the cryptomonad Guillardia theta is one of the first examples of a rubredoxin encoded in a eukaryotic organism. The structure of a soluble zinc-substituted 70-residue G. theta rubredoxin lacking the membrane anchor and the thylakoid targeting sequence was determined by multidimensional heteronuclear NMR, representing the first three-dimensional (3D) structure of a eukaryotic rubredoxin. For the structure calculation a strategy was applied in which information about hydrogen bonds was directly inferred from a long-range HNCO experiment, and the dynamics of the protein was deduced from heteronuclear nuclear Overhauser effect data and exchange rates of the amide protons. The structure is well defined, exhibiting average root-mean-square deviations of 0.21 A for the backbone heavy atoms and 0.67 A for all heavy atoms of residues 7-56, and an increased flexibility toward the termini. The structure of this core fold is almost identical to that of prokaryotic rubredoxins. There are, however, significant differences with respect to the charge distribution at the protein surface, suggesting that G. theta rubredoxin exerts a different physiological function compared to the structurally characterized prokaryotic rubredoxins. The amino-terminal residues containing the putative signal peptidase recognition/cleavage site show an increased flexibility compared to the core fold, but still adopt a defined 3D orientation, which is mainly stabilized by nonlocal interactions to residues of the carboxy-terminal region. This orientation might reflect the structural elements and charge pattern necessary for correct signal peptidase recognition of the G. theta rubredoxin precursor.

Role of the prosequence of guanylin.

Guanylin is a guanylyl cyclase (GC)-activating peptide that is mainly secreted as the corresponding prohormone of 94 amino acid residues. In this study, we show that the originally isolated 15-residue guanylin, representing the COOH-terminal part of the prohormone, is released from the prohormone by cleavage of an Asp-Pro amide bond under conditions applied during the isolation procedures. Thus, the 15-residue guanylin is probably a non-native, chemically induced GC-activating peptide. This guanylin molecule contains two disulfide bonds that are absolutely necessary for receptor activation. We demonstrate that the folding of the reduced 15-residue guanylin results almost completely in the formation of the two inactive disulfide isomers. In contrast, the reduced form of proguanylin containing the entire prosequence folds to a product with the native cysteine connectivity. Because proguanylin lacking the 31 NH2-terminal residues of the prosequence folds only to a minor extent to guanylin with the native disulfide bonds, it is evident that this NH2-terminal region contributes significantly to the correct disulfide-coupled folding. Structural studies using CD and NMR spectroscopy show that native proguanylin contains a considerable amount of alpha-helical and, to a lesser extent, beta-sheet structural elements. In addition, a close proximity of the NH2- and the COOH-terminal regions was found by NOESY. It appears that this interaction is important for the constitution of the correct conformation and provides an explanation of the minor guanylyl cyclase activity of proguanylin by shielding the bioactive COOH-terminal domain from the receptor.

Structure determination of human and murine beta-defensins reveals structural conservation in the absence of significant sequence similarity.

Defensins are cationic and cysteine-rich peptides that play a crucial role in the host defense against microorganisms of many organisms by their capability to permeabilize bacterial membranes. The low sequence similarity among the members of the large mammalian beta-defensin family suggests that their antimicrobial activity is largely independent of their primary structure. To investigate to what extent these defensins share a similar fold, the structures of the two human beta-defensins, hBD-1 and hBD-2, as well as those of two novel murine defensins, termed mBD-7 and mBD-8, were determined by nuclear magnetic resonance spectroscopy. All four defensins investigated share a striking similarity on the level of secondary and tertiary structure including the lack of a distinct hydrophobic core, suggesting that the fold is mainly stabilized by the presence of three disulfide bonds. In addition to the overall shape of the molecules, the ratio of solvent-exposed polar and hydrophobic side chains is also very similar among the four defensins investigated. It is significant that beta-defensins do not exhibit a common pattern of charged and hydrophobic residues on the protein surface and that the beta-defensin-specific fold appears to accommodate a wide range of different amino acids at most sequence positions. In addition to the implications for the mode of biological defensin actions, these findings are of particular interest because beta-defensins have been suggested as lead compounds for the development of novel peptide antibiotics for the therapy of infectious diseases.

Biological activity and intracellular location of the Tat protein of equine infectious anemia virus.

The Tat protein of equine infectious anemia virus (EIAV) was synthesized in Escherichia coli using the inducible expression plasmid, pET16b, which contains a His.Tag leader, thus allowing for rapid and efficient enrichment of the histidine-tagged protein by metal affinity chromatography. Yields of up to 20 mg of Tat were obtained from 10(11) bacterial cells. The recombinant Tat protein was shown to potently trans-activate the EIAV long terminal repeat (LTR) following its introduction into canine cells by 'scrape loading'. The EIAV Tat protein was found to localize predominantly within the cytoplasm, in contrast to HIV-1 Tat. The availability of large amounts of purified functional EIAV Tat protein should greatly facilitate detailed structure-function analyses.

Identification and characterization of a eukaryotically encoded rubredoxin in a cryptomonad alga.

We have identified an open reading frame with homology to prokaryotic rubredoxins (rds) on a nucleomorph chromosome of the cryptomonad alga Guillardia theta. cDNA analysis let us propose that the rd preprotein has an NH(2)-terminal extension that functions as a transit peptide for import into the plastid. Compared to rds found in non-photosynthetic prokaryotes or found in bacteria that exhibit an anoxigenic photosynthesis apparatus, nucleomorph rd has a COOH-terminal extension, which shows high homology exclusively to the COOH-termini of cyanobacterial rds as well as to a hypothetical rd in the Arabidopsis genome. This extension can be divided into a putative membrane anchor and a stretch of about 20 amino acids with unknown function linking the common rd fold to this anchor. Overexpression of nucleomorph rd in Escherichia coli using a T7 RNA polymerase/promotor system resulted in a mixture of iron-containing holorubredoxin and zinc-substituted protein. Preliminary spectroscopic studies of the iron form of nucleomorph rd suggest the existence of a native rd-type iron site. One-dimensional nuclear magnetic resonance spectroscopy of recombinant Zn-rd suggests the presence of a stable tertiary fold similar to that of other rd structures determined previously.