Optimizing bone and biomass co-torrefaction parameters: High-performance arsenic removal from wastewater via co-torrefied bone char.

This study aimed to investigate bone char's physicochemical transformations through co-torrefaction and co-pyrolysis processes with biomass. Additionally, it aimed to analyze the carbon sequestration process during co-torrefaction of bone and biomass and optimize the process parameters of co-torrefaction. Finally, the study sought to evaluate the arsenic sorption capacity of both torrefied and co-torrefied bone char. Bone and biomass co-torrefaction was conducted at 175 °C-300 °C. An orthogonal array of Taguchi techniques and artificial neural networks (ANN) were employed to investigate the influence of various torrefaction parameters on carbon dioxide sequestration within torrefied bone char. A co-torrefied bone char, torrefied at a reaction temperature of 300 °C, a heating rate of 15 °C·min-1, and mixed with 5 g m of biomass (wood dust), was selected for the arsenic (III) sorption experiment due to its elevated carbonate content. The results revealed a higher carbonate fraction (21%) in co-torrefied bone char at 300 °C compared to co-pyrolyzed bone char (500-700 °C). Taguchi and artificial neural network (ANN) analyses indicated that the relative impact of process factors on carbonate substitution in bone char followed the order of co-torrefaction temperature (38.8%) > heating rate (31.06%) > addition of wood biomass (30.1%). Co-torrefied bone chars at 300 °C exhibited a sorption capacity of approximately 3 mg g-1, surpassing values observed for pyrolyzed bone chars at 900 °C in the literature. The findings suggest that co-torrefied bone char could serve effectively as a sorbent in filters for wastewater treatment and potentially fulfill roles such as a remediation agent, pH stabilizer, or valuable source of biofertilizer in agricultural applications.

Support based metal incorporated layered nanomaterials for photocatalytic degradation of organic pollutants.

An effective approach to producing sophisticated miniaturized and nanoscale materials involves arranging nanomaterials into layered hierarchical frameworks. Nanostructured layered materials are constructed to possess isolated propagation assets, massive surface areas, and envisioned amenities, making them suitable for a variety of established and novel applications. The utilization of various techniques to create nanostructures adorned with metal nanoparticles provides a secure alternative or reinforcement for the existing physicochemical methods. Supported metal nanoparticles are preferred due to their ease of recovery and usage. Researchers have extensively studied the catalytic properties of noble metal nanoparticles using various selective oxidation and hydrogenation procedures. Despite the numerous advantages of metal-based nanoparticles (NPs), their catalytic potential remains incompletely explored. This article examines metal-based nanomaterials that are supported by layers, and provides an analysis of their manufacturing, procedures, and synthesis. This study incorporates both 2D and 3D layered nanomaterials because of their distinctive layered architectures. This review focuses on the most common metal-supported nanocomposites and methodologies used for photocatalytic degradation of organic dyes employing layered nanomaterials. The comprehensive examination of biological and ecological cleaning and treatment techniques discussed in this article has paved the way for the exploration of cutting-edge technologies that can contribute to the establishment of a sustainable future.

Recent advancements in MXene-based nanocomposites as photocatalysts for hazardous pollutant degradation - A review.

The recent expeditious industrialization and urbanization showcase the increasing need for renewable and non-renewable energy and the severe environmental crisis. In this regard, numerous 2-dimensional (2D) nanomaterials have been developed as a facile approach to meet the futuristic energy essentials and to resolve the crisis. In contrast, the newly explored 2D MXenes (transition metal carbide/nitrides/carbonitride) have been employed as an intriguing material for various environmental applications. This development is accredited to their unique properties, which include a vast surface area, strong electrical conductivity, fascinating photophysical properties, high mechanical properties, stability in an aqueous medium, high hydrophilicity, biocompatibility, ease of functionalization, and excellent thermal properties. MXenes act as a potential candidate in water desalination, energy storage devices such as electrodes of Li-ion batteries and pseudo capacitors, hydrogen production, sensors, and wastewater treatment. This review article deliberates the synthesis of MXene and nanocomposites of MXene and their photo-catalytic actions against various toxic pollutants such as organic dyes and heavy metals in wastewater. This review also precises the various preparation methods of MXene-based photocatalyst and the enhanced photocatalytic activity of MXene and MXene-based nanocomposites in wastewater treatment. Also, it details the attempts made to improve the photocatalytic activity of MXene-based nanocomposites in terms of their structural compositions. In addition, the merits and demerits of the MXene-based photocatalysts are deliberated, which may pave the way for future research in this arena.

Progressive yield of nickel cobaltite nanocubes for visible light utilization and degrading activities of methyl orange dye pollutant.

In this study, pure cobalt oxide (Co3O4) as well as nickel cobaltite (NiCo2O4) were investigated with their capacity of degradation efficiency for textile dyes like methyl orange (MO) employing visible light irradiation. Two variable concentrations of nickel cobaltite (NiCo2O4) with 75:25 and 50:50 wt ratios along with the pure metal oxides were synthesized by thermal decomposition method and analyzed by various sophisticated instruments. Initially, the structural characteristics described the fine crystalline nature of NiCo2O4 and also exhibits reduced size than the pure component material (Co3O4). Besides, NiCo2O4 catalysts represented nano cubic shaped particles, and also their coordinating functional groups were evaluated. Further, the absorption wavelength confirms the two band positions of NiCo2O4 which leads to promote visible light absorption, and degrading efficiency of about 47.5% for NiCo2O4 (75:25) sample compared with NiCo2O4 (50:50) which produced only 26.3% degradation. This higher efficiency of the former was due to high crystallinity and interfacial charge transfer of combined Ni2+, Ni3+, Co2+ and Co3+ redox couples. This consecutively produces effective OH radicals that brought the degradation effectively under visible light. The recycling capacity up to 5 repeated cycles has been studied with the NiCo2O4 (75:25) and therefore the catalyst can further be used in other dye degradation.

Biochar supported nano core-shell (TiO2/CoFe2O4) for wastewater treatment.

The porous structure of biochar, its large surface area, and its anti-oxidant properties are extensively used for pollutant removal strategies. The literature to date has reported that the biochar assisted metal-oxide core-shells have a dominating degradation ability under solar irradiation. Therefore, this study is significantly focused on cinnamon biochar as an active anti-oxidant agent incorporated in titania-cobalt ferrite nanocore-shell (Biochar/TiO2/CoFe2O4) structures for the first time in wastewater treatment against chlorophenol pollutants. Pure materials, core-shells, and biochar aided composites were synthesized by chemical methods, and their characteristics were analyzed using various instrumentation techniques. The diffraction outcomes of Biochar/TiO2/CoFe2O4 showed the mixed phases containing biochar, TiO2, and CoFe2O4. The morphological characteristics revealed that the biochar creates porosity and a peripheral layer covering the core-shell. Meanwhile, absorption studies of TiO2/CoFe2O4 core-shell and Biochar/TiO2/CoFe2O4 samples achieved 65% and 92% degradation efficiencies when exposed to visible light against chlorophenol pollutants, respectively. All these results confirm the presence of distinct functional groups as well as the combined synergistic effects that activated the charge separation, resulting in the successful destruction of water pollutants. In addition, the highly efficient Biochar/TiO2/CoFe2O4 sample was recycled, and the efficiency was maintained stable for five repeated degradation processes. Thus, Biochar/TiO2/CoFe2O4 will be utilized to expand the possibilities for biofuel generation and energy storage devices.

Mesoporogen free synthesis of CuO/TiO2 heterojunction for ultra-trace detection of catechol in water samples.

Creating mesoporous architecture on the surface of metal oxides without using pore creating agent is significant interest in electrochemical sensors because these materials act as an efficient electron transfer process between the electrode interface and the analytes. Recent advances in mesoporous titanium dioxide (TiO2)-based materials have acquired extraordinary opportunities because of their interconnected porous structure could act as a host for doping with various transition metals or heteroatoms to form a new type of heterojunction. Herein, a simple method is developed to synthesize mesoporous copper oxide (CuO) decorated on TiO2 nanostructures in which homogenous shaped CuO nanocrystals act as dopants decorated on the mesoporous structure of TiO2, resulting in p-n heterojunction nanocomposite. The TiO2 particles exhibit a mesoporous structure with a pore volume of about 0.117 cm3/g is capable to load CuO nanocrystals on the surface. As a result, large pore volume 0.304 cm³/g is obtained for CuO-TiO2 heterojunction nanocomposite with the loading of uniform-shaped CuO nanocrystals on the mesoporous TiO2. The resulting CuO-TiO2 nanocomposite on modified glassy carbon (GC) electrode exhibits good electrochemical performance for oxidation of catechol with the observation of strong enhancement in the anodic peak potential at +0.36 V. The decrease in the overpotential for the oxidation of catechol when compared to TiO2/GC is attributed to the presence of CuO nanocrystals providing a large surface area, resulting in wide linear range 10 nM to 0.57 µM. Moreover, the resultant modified electrode exhibited good sensitivity, selectivity and reproducibility and the sensor could able to determine the presence of catechol in real samples such as lake and river water. Therefore, the obtained CuO-TiO2 nanocomposite on the modified GC delivered good electrochemical sensing performance and which could be able to perform a promising strategy for designing various metal oxide doped nanocomposites for various photochemical and electrocatalytic applications.

A mechanothermal approach for the synthesis of Fe3O4 nanoparticles as dopant on mesoporous TiO2 for electrochemical determination of catechol.

The subject of water contamination and how it gets defiled to the society and humans is confabulating from the past decades. Phenolic compounds widely exist in the water sources and it is emergent to determine the toxicity in natural and drinking water, because it is hazardous to the humans. Among these compounds, catechol has sought a strong concern because of its rapid occurrence in nature and its potential toxicity to humans. The present work aims to develop an effective electrochemical sensing of catechol using mesoporous structure of Fe3O4-TiO2 decorated on glassy carbon (GC) electrode. The creation of pure TiO2 using the sol-gel technique was the first step in the synthesis protocol for binary nanocomposite, which was then followed by the loading of Fe3O4 nanoparticles on the surface of TiO2 using the thermal decomposition method. The resultant Fe3O4-TiO2 based nanocomposite exhibited mesoporous structure and the cavities were occupied with highly active magnetite nanoparticles (Fe3O4) with high specific surface area (90.63 m2/g). When compared to pure TiO2, catechol showed a more prominent electrochemical response for Fe3O4-TiO2, with a significant increase in anodic peak current at a lower oxidation potential (0.387 V) with a detection limit of 45 µM. Therefore, the prepared magnetite binary nanocomposite can serve as an efficient electroactive material for sensing of catechol, which could also act as a promising electrocatalyst for various electrocatalytic applications.

Transformation of used aluminium foil food container into AlOOH nanoflakes with high catalytic activity in anionic azo dye reduction.

Synthesis of aluminium-based nanomaterials from aluminium-waste has received huge attention in current scientific research. Herein, an attempt was made to convert aluminium foil food container into aluminium oxyhydroxide (AlOOH) nanoparticles by a precipitation method. X-ray diffraction (XRD), spectroscopic and electron microscopic studies were employed to characterize impure AlOOH (containing sodium chloride, NaCl) and pure AlOOH samples. The band gap (Eg) of AlOOH nanoparticles was found to be 4.5 eV. The catalytic potential of AlOOH samples was evaluated using reduction of methyl orange (MO) and Eriochrome black T (EBT) dyes. Impure AlOOH nanoparticles could reduce 99.8% of MO and EBT dye within 4 min and 3 min respectively. Effect of the AlOOH dosage and NaBH4 concentration on catalytic reduction was determined. Used aluminium foil food container-derived AlOOH nanoparticles will become a low-cost and sustainable catalyst in the catalytic treatment of azo dye contaminated waters.

Mesoporous NiO/Ni2O3 nanoflowers for favorable visible light photocatalytic degradation of 4-chlorophenol.

The present study highlights the treatment of industrial effluent, which is one of the most life-threatening factors. Herein, for the first time, two types of NiO (green and black) photocatalysts were prepared by facile chemical precipitation and thermal decomposition methods separately. The synthesized NiO materials were demonstrated with various instrumental techniques for finding their characteristics. The X-ray diffraction studies (XRD) and X-ray photoelectron spectroscopy (XPS) revealed the presence of Ni2O3 in black NiO material. The transmission electron microscopic (TEM) images engrained the nanospherical shaped green NiO and nanoflower shaped black NiO/Ni2O3 materials. Further, the band gap of black NiO nanoflower was 2.9 eV compared to green NiO having 3.8 eV obtained from UV-vis spectroscopy. Meanwhile, both NiO catalysts were employed for visible light degradation, which yields a 60.3% efficiency of black NiO comparable to a 4.3% efficiency of green NiO within 180 min of exposure. The higher degrading efficiency of black NiO was due to the presence of Ni2O3 and the development of pores, which was evident from the Barrett-Joyner-Halenda (BJH) method. Type IV hysteresis was observed in black NiO nanoflowers with high surface area and pore size measurements. This black NiO/Ni2O3 synthesized from the thermal decomposition method has promoted better photocatalytic degradation of 4-chlorophenol upon exposure to visible light and is applicable for other industrial pollutants.

Waste toner-derived porous iron oxide pigments with enhanced catalytic degradation property.

'Wealth from Waste' is an emerging concept, since it leads an effective waste treatment and waste recyclability. On the other hand, cost effective production iron oxide (IO) nanomaterials is still needed to develop, owing to their wide applications. Herein, we proposed a simple direct calcination method to prepare porous IO (Fe3O4 and Fe2O3) nanomaterials from waste toner powder. Characterization techniques reveal that a structural change happened from Fe3O4 to γ-Fe2O3 and γ-Fe2O3 to α-Fe2O3 at the calcination temperature of 500 °C and 700 °C respectively. Consequently, optical (band gap) and magnetic parameters of IO samples were significantly varied. The pigment characteristics of the IO samples were evaluated using Commission Internationale de l'Eclairage (CIE) analysis. IO900 sample has shown good brown-red coloration (L* = 43.11, a* = 13.26 and b* = 5.69) and it also exhibited good stability in acidic and basic conditions. Practical applicability of IO pigments were also tested by mixing with plaster of paris (PP) powder. Further, porous IO samples were also used as catalysts in the reductive degradation of methyl orange (MO) dye in presence of excess sodium borohydride (NaBH4). IO, prepared at 900 °C exhibited ∼99.9% reduction efficiency within 40 min. Recycling experiments indicated that IO900 possess good stability up to seven cycles. The present porous IO samples will become potential in pigment and environmental remediation.

State-of-art advances on removal, degradation and electrochemical monitoring of 4-aminophenol pollutants in real samples: A review.

p_Aminophenol, namely 4-aminophenol (4-AP), is an aromatic compound including hydroxyl and amino groups contiguous together on the benzene ring, which are suitable chemically reactive, amphoteric, and alleviating agents in nature. Amino phenols are appropriate precursors for synthesizing oxazoles and oxazines. However, since the toxicity of aniline and phenol can harm human and herbal organs, it is essential to improve a reliable technique for the determination of even a trace amount of amino phenols, as well as elimination or (bio)degradation/photodegradation of it to protect both the environment and people's health. For this purpose, various analytical methods have been suggested up till now, including spectrophotometry, liquid chromatography, spectrofluorometric and capillary electrophoresis, etc. However, some drawbacks such as the requirement of complex instruments, high costs, not being portable, slow response time, low sensitivity, etc. prevent them to be employed in a wide range and swift in-situ applications. In this regard, besides the efforts such as (bio)degradation/photodegradation or removal of 4-AP pollutants from real samples, electroanalytical techniques have become a promising alternative for monitoring them with high sensitivity. In this review, it was aimed to emphasize and summarize the recent advances, challenges, and opportunities for removal, degradation, and electrochemical sensing 4-AP in real samples. Electroanalytical monitoring of amino phenols was reviewed in detail and explored the various types of electrochemical sensors applied for detecting and monitoring in real samples. Furthermore, the various technique of removal and degradation of 4-AP in industrial and urban wastes were also deliberated. Moreover, deep criticism of multifunctional nanomaterials to be utilized as a catalyst, adsorbent/biosorbent, and electroactive material for the fabrication of electrochemical sensors was covered along with their unique properties. Future perspectives and conclusions were also criticized to pave the way for further studies in the field of application of up-and-coming nanostructures in environmental applications.

Novel ZIF-67-derived Co@CNTs nanocomposites as effective adsorbents for removal of tetracycline and sulfadiazine antibiotics.

Tetracycline (TCC) and sulfadiazine (SDZ) are two of the most consumed antibiotics for human therapies and bacterial infection treatments in aquafarming fields, but their accumulative residues can result in negative effects on water and aquatic microorganisms. Removal techniques are therefore required to purify water before use. Herein, we concentrate on adsorptive removal of TCC and SDZ using cobalt@carbon nanotubes (Co@CNTs) derived from Co-ZIF-67. The presence of CNTs on the edge of nanocomposites was observed. Taguchi orthogonal array was designed with four variables including initial concentration (5-20 mg L-1), dosage (0.05-0.2 g L-1), time (60-240 min), and pH (2-10). Concentration and pH were found to be main contributors to adsorption of tetracycline and sulfadiazine, respectively. The optimum condition was found at concentration 5 mg L-1, dosage 0.2 g L-1, contact time 240 min, and pH 7 for both TCC and SDZ removals. Confirmation tests showed that Co@CNTs-700 removed 99.6% of TCC and 97.3% of SDZ with small errors (3-5.5%). Moreover, the kinetic and isotherm were studied, which kinetic and isotherm data were best fitted with pseudo second-order model and Langmuir. Maximum adsorption capacity values for TCC and SDZ were determined at 118.4-174.1 mg g-1 for 180 min. We also proposed the main role of interactions such as hydrogen bonding, π-π stacking, and electrostatic attraction in the adsorption of antibiotics. With high adsorption performance, Co@CNTs-700 is expected to remove antibiotics efficiently from wastewater.

Coupling of carboxymethyl starch with 2-carboxyethyl acrylate: A new sorbent for the wastewater remediation of methylene blue.

Textile and printing industries play a vital role in the economy of any country. But the effluents of these industries, which contain toxic Methylene Blue (MB) dye when mixed with fresh water, make it unfit for human health and aquatic life. For the removal of MB, different adsorbents were used, but they were expensive, non-biodegradable or less effective. In this research, novel carboxymethyl starch grafted poly 2-carboxyethyl acrylate (CM-St-g-P2CEtA) was synthesized by reacting carboxymethyl starch with 2-carboxyethyl acrylate. The reaction followed a free radical polymerization mechanism. The structure and properties of CM-St-g-P2CEtA were investigated by advanced analytical techniques. The CM-St-g-P2CEtA was employed for the remediation of Methylene Blue (MB) dye from wastewater. The removal percentage (%R) of MB was checked under different parameters, like different pH levels, different initial concentrations of dye, different adsorbent doses, and different contact times. The results obtained during the experiment were subjected to different adsorption and kinetic models. In the kinetic investigation, the experimental results were best represented by the pseudo-second-order kinetic model due to its high R2 value of 0.999. Similarly, with a regression coefficient (R2) value of 0.947, the Langmuir adsorption isotherm was best represented by the experimental results. The Langmuir adsorption model showed that MB dye was adsorbed on the surface of CM-St-g-P2CEtA in a monolayer pattern. The pseudo 2nd order kinetic model suggested that the adsorption process favored chemisorption mechanism. The CM-St-g-P2CEtA showed maximum percentage removal efficiency (%R) of 99.3% for MB dye.

Prevalence of differential microbiome in healthy, diseased and nipped colonies of corals, Porites lutea in the Gulf of Kachchh, north-west coast of India.

Coral reefs are constantly subjected to multiple stresses like diseases and fish predation, which can profoundly influence the coral microbiome. This study investigated the differences in bacterial community structure of healthy, white syndrome affected and blenny nipped coral colonies of Porites lutea, collected from the coral reefs of Gulf of Kachchh, north-west coast of India. Present study observed that the stressed coral colonies harbored more OTUs and contained higher diversity values compared to healthy corals colonies. Similarly, beta diversity analysis indicated the dissimilarities among the three coral samples analyzed. Though the taxonomy analysis indicated bacterial phyla like Proteobacteria, Firmicutes, Bacteroidetes, and Actinobacteria among the entire coral samples studied, there was a variation in their relative abundances. Huge variations were observed in the relative dominance at the bacterial genera level. About 13phyla and 11 genera was identified in healthy coral. The PBN sample was found to contain Proteobacteria, Cyanobacteria, Verrucomicrobia, and Lentisphaerae as dominant phyla and Endozoicomonas, Dyella, Woeseia, and Winogradskyella as dominant genera. The PWS sample contained Proteobacteria, Lentisphaerae, Spirochaetes, and Tenericutes as dominant phyla and Endozoicomonas, Arcobacter, Sunxiuqinia, and Carboxylicivirgia as dominant genera. Among the healthy samples, sequences belonging to Uncultured Rhodospirillaceae were dominant, while Woeseia and sequences belonging to Uncultured Rhodovibrionaceae were dominant among the blenny nipped white syndrome infected corals. Although any previously established pathogen was not identified, present study revealed the presence of a potentially pathogenic bacterium, Arcobacter, among the diseased corals. It also demonstrated a dynamic microbiome among the Porites lutea colonies on subjecting to various stresses.

Novel S-scheme 2D/2D Bi4O5Br2 nanoplatelets/g-C3N5 heterojunctions with enhanced photocatalytic activity towards organic pollutants removal.

Removal of organic pollutants and pharma products in waste water using semiconductor photocatalysts has gained huge interest among recent days. However, low visible light absorption, recombination rate of charge carriers and less availability of reaction sites are still major obstacles for the photocatalysis process. Herein, an in situ-forming Bi4O5Br2 nanosheets decorated on the surface g-C3N5 were prepared via simple hydrothermal method under ambient temperature. The basic pH condition plays a vital role in growing for Bi4O5Br2 nanosheets. Various characterization studies such as TEM, SEM, PL and UV-DRS studies confirmed the formation of close contact between the Bi4O5Br2 and g-C3N5 nanosheets. The construction of Bi4O5Br2 nanoplatelets/g-C3N5 nanocomposite increases the surface-active sites and improving the separation efficiencies of excitons, which is greatly influenced in the degradation of ciprofloxacin and bisphenol-A pollutants. Meanwhile, the flow of electrons from the layered structured graphite carbon of g-C3N5 which enables excellent electrical contact in the heterojunction. Besides, the main free radicals were determined as e- and •O2-, and production level of free radicals were confirmed by radical trapping experiments. The possible degradation mechanism was proposed and discussed. Finally, this work provides a unique approach to in-situ preparation of heterojunction photocatalysts and demonstrates the prepared Bi4O5Br2 nanoplatelets/g-C3N5 photocatalysts have great potential in the waste water management.

Occurrences and removal of pharmaceutical and personal care products from aquatic systems using advanced treatment- A review.

Pharmaceuticals, personal care items, steroid hormones, and agrochemicals are among the synthetic and indigenous products that make up micropollutants, also known as emerging contaminants. Pharmaceutical and personal care products (PPPs) are a class of developing micropollutants that can harm living organisms even at low concentrations. Many are detected in surface water and wastewater from the treatment process, with quantities ranging from ng L-1 to gL-1; however, residual PPPs at dangerously high levels have indeed recently been recognized in the ecosystem. Residential sewage treatment plant (STP) dump the largest majority of these pollutants into the environment on a regular basis. As a result of its robust structure, it has a longer lifespan in the environment. This review article discusses how surface water pollutants such pesticides, petroleum hydrocarbons, and perfluorinated compounds affect water quality, as well as the most cost-effective adsorbents for removing these PPPs. The goal of this study is to provide information about the origins of PPP, as well as diagnostic procedures and treatment options. Research on developing contaminants is also aimed at evaluating the efficacy and affordability of adsorption.

Immobilization of enzymes for bioremediation: A future remedial and mitigating strategy.

Over the years, extensive urbanization and industrialization have led to xenobiotics contamination of the environment and also posed a severe threat to human health. Although there are multiple physical and chemical techniques for xenobiotic pollutants management, bioremediation seems to be a promising technology from the environmental perspective. It is an eco-friendly and low-cost method involving the application of microbes, plants, or their enzymes to degrade xenobiotics into less toxic or non-toxic forms. Moreover, bioremediation involving enzymes has gained an advantage over microorganisms or phytoremediation due to better activity for pollutant degradation with less waste generation. However, the significant disadvantages associated with the application of enzymes are low stability (storage, pH, and temperature) as well as the low possibility of reuse as it is hard to separate from reaction media. The immobilization of enzymes without affecting their activity provides a possible solution to the problems and allows reusability by easing the process of separation with improved stability to various environmental factors. The present communication provides an overview of the importance of enzyme immobilization in bioremediation, carrier selection, and immobilization methods, as well as the pros and cons of immobilization and its prospects.

Advancements on sustainable microbial fuel cells and their future prospects: A review.

A microbial fuel cell (MFC) is a sustainable device that produces electricity. The main components of MFC are electrodes (anode & cathode) and separators. The MFC's performance is ascertained by measuring its power density. Its components and other parameters, such as cell design and configuration, operation parameters (pH, salinity, and temperature), substrate characteristics, and microbes present in the substrate, all influence its performance. MFC can be scaled up and commercialized using low-cost materials without affecting its performance. Hence the choice of materials plays a significant role. In the past, precious and non-precious metals were mostly used. These were replaced by a variety of low-cost carbonaceous and non-carbonaceous materials. Nano materials, activated compounds, composite materials, have also found their way as components of MFC materials. This review describes the recently reported modified electrodes (anode and cathode), their improvisation, their merits, pollutant removal efficiency, and associated power density.

Bi-based photocatalysts for bacterial inactivation in water: Inactivation mechanisms, challenges, and strategies to improve the photocatalytic activity.

Bi-based photocatalysts have been considered suitable materials for water disinfection under natural solar light due to their outstanding optical and electronic properties. However, until now, there are not extensive reviews about the development of Bi-based materials and their application in bacterial inactivation in aqueous solutions. For this reason, this work has focused on summarizing the state of the art related to the inactivation of Gram- and Gram + pathogenic bacteria under visible light irradiation using different Bi-based micro and nano structures. In this sense, the photocatalytic bacterial inactivation mechanisms are analyzed, considering several modifications. The factors that can affect the photocatalytic performance of these materials in real conditions and at a large scale (e.g., water characteristics, pH, light intensity, photocatalyst dosage, and bacteria level) have been studied. Furthermore, current alternatives for improving the photocatalytic antibacterial activity and reuse of Bi-based materials (e.g., surface engineering, crystal facet engineering, doping, noble metal coupling, heterojunctions, Z-scheme junctions, coupling with graphene derivatives, magnetic composites, immobilization) have been explored. According to several reports, inactivation rate values higher than 90% can be achieved by using the modified Bi-based micro/nano structures, which become them excellent candidates for photocatalytic water disinfection. However, these innovative photocatalytic materials bring a variety of future difficulties and opportunities in water disinfection.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview.

Recently, halides (silver halides, AgX; perosvkite halides, ABX3) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX3 and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX3 and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.