Effect of doses fertilizer and harvest interval on the intensity of leaf spot diseases, production and quality of citronella grass (Cymbopogon nardus L.) essential oils in ultisols soil.

Until now, Indonesia is still a world exporter of essential oils, including citronella oil. So that the role of farming communities in the development of Indonesia's essential oil industry is very helpful. For this reason, a study was carried out on response of fertilization and harvest interval on the intensity of leaf spot diseases of citronella grass, and productivity in ultisols soil which was carried out from October 2020 to September 2022. The experiment was arranged in a randomized block design in factorial with 9 treatments, as the first factor is 3 levels of an organic fertilizer (NPK); P1 = 25 g clumps -1, P2 = 37.5 g clumps -1 and P3 = 50 g clumps -1. The second factor is the harvest interval with three levels which is 4 = harvest interval once every 4 months, 3 = harvest interval every 3 months and 2 = harvest interval once every 2 months, repeated three times. Each treatment plot consisted of 24 clumps with a plant spacing of 1 × 1 × 1 m. Varieties used is Serai wangi 1. Parameters observed were intensity of leaf spot diseases, vegetative growth, livestock production, oil production, quality analysis and R/C ratio. The results showed that there was an effect of fertilizer doses and harvest intervals on the development of leaf spot disease. It was seen that at the application of fertilizer doses of 37.5 g clumps -1 with harvest intervals once every three months showed the lowest disease attacks, namely on Cuvularia sp and Pestalotia sp (5.98%, 5.42% and 7.98 %, 7.44 %). In addition, the development of vegetative growth is also influenced by the application of fertilizer doses and harvest intervals on the parameters of canopy width, plant height, leaf length, leaf width and number of tillers. The best fertilizer dose is 37.50 g clump -1 successively (175.40 cm, 172.29 cm, 113.62 cm, 2.36 cm and 119.59 stems), with harvest intervals every 3 months (179.40 cm, 187.29 cm, 119.44 cm, 2.45 cm and 120.00 stems), as well as fresh leaves production tons/ha/year and oil production kg/ha/year the best is the application of fertilizer doses of 37.50 g clumps-1 with harvest intervals once every 3 months (67.81 tons-ha-year and 578.61 kg-ha- year,with, 67.40 tons-ha-th and 517.60 kg-ha-th). For oil quality, numerically, the application of fertilizer at a dose of 37.50 g of clump -1 with harvest intervals every 3 months is still high. The proper R/C ratio for farming occurs in the 2 nd year by administering a fertilizer dose of 37.50 g clump-1 and harvesting intervals once every 3 months with an increase of 116.67%. So, the citronella grass variety Serai wangi 1 can be developed on ultisol soil types by applying an organic fertilizer (NPK).

Kinetic parameter for scale-up and γ-oryzanol content of rice bran oil as antioxidant: Comparison of maceration, ultrasonication, pneumatic press extraction.

Rice bran oil is one of oryzanol source oils. Oryzanol is an antioxidant compound that is related to the absorption of cholesterol, and is used in hyperlipidemia treatment and menopause problems. RBO extraction, purification and its γ-oryzanol content have been carefully reviewed. The quality and concentration of γ-oryzanol depend on the extraction process and purification. In selecting the extraction method to obtain the highest oryzanol content, in addition to comparing the concentration of oryzanol obtained and it can also be done by comparing the extraction kinetics parameters. Modeling according to physical or empirical kinetics can contribute in increasing the result of extraction. This study aims to determine the highest oryzanol content in rice bran oil, comparing several extraction methods and studies of rice bran oil extraction kinetic is necessary for scale up purposes. In this study is conducted Rice Bran Oil Extraction with n-Hexane solvent using several different methods, such as maceration, ultrasonication, and pneumatic press extractions. Independent variable that is used is the extraction time and yield as dependent variable. The study shows that the best extraction method to get the highest yield is 10.34 % by ultrasonicator and oryzanol content is 5.09 mg/g by a pneumatic press machine. According to kinetic parameter k2 is 0.001546, Cs is 0.0589, and h is 0.4707, R2 = 0.9715 obtained from extraction using ultrasonicator.

Anatomical variation of mental foramen. A case report.

We have reported a case of triple mental foramina at the right side of the premolar region, which was discovered during reposition and ostheosynthesis of a mandible fracture. A review of the literature, was performed which disclosed no previous clinical cases reported but an incidence of 1.2% of triple foramina after investigating dry skulls or radiographics. The discussion stresses the importance of adequate preoperative radiological examination in the clinical situation especially when closed surgery is planned.

A retrospective study of patients with mandibular fractures treated at a Swedish University Hospital 1999-2008.

BACKGROUND: Fracture of the mandible is one of the most common fractures of the maxillofacial skeleton. However, the etiology, gender, and age distribution vary between different regions and countries, and the purpose of this study was to evaluate the current trend of patients with mandibular fractures at the Department of Oral and Maxillofacial Surgery, in Uppsala, Sweden. AIM: The aim of this retrospective study was to analyze patients with mandibular fractures treated in the University Hospital of Uppsala (the county capital of Uppland) Sweden during a 10-year period (1999-2008). MATERIALS AND METHODS: This study was designed as a retrospective study of patients admitted to the Department of Oral and Maxillofacial Surgery at Uppsala University Hospital, Sweden. The location of fractures was evaluated clinically by the surgeon and on the X-rays. We classified the data according to gender, age, etiology, day of the week, month of the year, fracture site, and method of treatment of the fractures. RESULTS: Records were collected from patient charts from 266 patients. One hundred eighty-seven patients (70%) with mandibular fractures were of male gender, and 132 patients (50%) were aged 16-30 years. Interpersonal violence constituted the most common etiological factor for mandibular fractures (24%), followed by falls (23%). Forty-nine percentages of the patients were treated surgically, and 51% were treated conservatively. There was an increase of the annual incidence of fractures toward the end of the period, even though not statistically significant. CONCLUSIONS: Mandibular fractures occurred primarily among younger men between 16- and 30-year-old. Condyle fractures were the most common fracture site and 50% of the patients required surgery. Summer months and weekends were the most common time of mandibular fractures.

Comparison of Blepharoptosis Correction Using Müller-aponeurosis Composite Flap Advancement and Frontalis Muscle Transfer.

BACKGROUND: Treatments for severe blepharoptosis are well documented and include the most common operations for restoring upper eyelid ptosis, which are levator surgery and frontal muscle transfers; however, the choice of treatment is still controversial. There are different approaches to the restoration of upper eyelid ptosis, and the choice will be based on ptosis severity and the surgeon's skill and experience. METHODS: Two hundred and fourteen patients presenting with a levator function of between 2 and 4 mm received ptosis correction between 1991 and 2010 at our clinic. Of these, 71 patients underwent Müller aponeurosis composite flap advancement for correction of 89 eyelids, and frontalis muscle transfer was performed on 143 patients (217 eyelids). Postoperative results were evaluated with an average follow-up period of 23 months. RESULTS: The preoperative average for marginal reflex distance (MRD1) in the Müller aponeurosis composite flap advancement group was 1.25 mm, and in the frontal muscle transfer group, it was 0.59 mm. The area of corneal exposure (ACE) was 57.2% in the Müller aponeurosis composite flap advancement group and 53.6% in the frontal muscle transfer group. The postoperative average distance was not significantly different for the 2 techniques. In the Müller aponeurosis composite flap advancement group, MRD1 was 2.7 mm and ACE was improved to 73.5%. In the frontal muscle transfer group, MRD1 was 2.3 mm and ACE was 71.2%. Undercorrection and eyelid asymmetry were the most frequently observed postoperative complications for both techniques. CONCLUSIONS: In our study, we confirmed that Müller aponeurosis composite flap advancement and the frontalis transfer technique are both effective in the correction of severe blepharoptosis; our results showed no significant differences between the 2 techniques.