RESUMO
AIM: This study aimed to fabricate dexamethasone sodium phosphate loaded microneedle arrays (MNA) and investigate their efficiency in combination with iontophoresis for the treatment of hind paw oedema in rats. METHODS: Drug loaded polyvinyl alcohol, polyvinyl pyrrolidone and D-sorbitol-based MNA11 were fabricated by vacuum micromolding. Physicochemical, morphological, thermal, in-silico, in-vitro insertion ability (on parafilm) and drug release studies were performed. Ex-vivo permeation, in-vivo insertion and anti-inflammatory studies were performed in combination with iontophoresis. RESULTS: MNA11 displayed sharp-tipped projections and acceptable physicochemical features. Differential scanning calorimetry results indicated that drug loaded MNA11 were amorphous solids. Drug interacted with PVP and PVA predominately via hydrogen bonding. Parafilm displayed conspicuously engraved complementary structure of MNA11. Within 60 min, 91.50 ± 3.1% drug released from MNA11. A significantly higher i.e., 95.06 ± 2.5% permeation of drug was observed rapidly (within 60 min) from MNA11-iontophoresis combination than MNA11 i.e., 84.07 ± 3.5% within 240 min. Rat skin treated using MNA11 and MNA11-iontophoresis showed disruptions / microchannels in the epidermis without any damage to underlying anatomical structures. MNA11-iontophoresis combination led to significant reduction (83.02 ± 3.9%) in paw oedema as compared to MNA11 alone (72.55 ± 4.1%). CONCLUSION: MNA11-iontophoresis combination can act as a promising candidate to deliver drugs transcutaneously for treating inflammatory diseases.
Assuntos
Administração Cutânea , Anti-Inflamatórios , Dexametasona , Sistemas de Liberação de Medicamentos , Edema , Iontoforese , Agulhas , Absorção Cutânea , Pele , Animais , Iontoforese/métodos , Dexametasona/administração & dosagem , Dexametasona/farmacocinética , Dexametasona/análogos & derivados , Ratos , Anti-Inflamatórios/administração & dosagem , Anti-Inflamatórios/farmacocinética , Edema/tratamento farmacológico , Sistemas de Liberação de Medicamentos/métodos , Pele/metabolismo , Pele/efeitos dos fármacos , Masculino , Liberação Controlada de Fármacos , Inflamação/tratamento farmacológico , Ratos Sprague-DawleyRESUMO
AIM: This study was aimed to develop rabies vaccine incorporated microneedle (MN) patches and evaluate the immunogenicity of prepared formulations in combination with iontophoresis. METHODS: Patches comprising of polyvinyl pyrrolidone, hyaluronic acid and polyethylene glycol 400 were engineered by vacuum micromolding technique. Physical evaluation of patches included determination of folding endurance, % swelling and morphological features. In vitro release study was performed in skin simulant agarose gel using model drug (methylene blue) loaded patches. In vitro insertion ability was assessed using stratum corneum simulant parafilm. In vivo insertion study was performed in rats. Immunogenicity was evaluated in dogs by determining immunoglobulin G (IgG) and rabies virus neutralizing antibodies (RVNA) titer. RESULTS: Patches displayed uniformly distributed microprojections with pointed tips and smooth surface, ~ 70% swelling, remained intact for ~ 200 foldings and successfully penetrated the parafilm. The area covered by model drug across agarose gel was almost double following treatment with MN-iontophoresis combination (MNdi) compared to MN alone (MNdo). Histological examination of rat skin treated with vaccine laden MN (MNvo) and MN-iontophoresis combination (MNvi) confirmed the formation of grooves in epidermis without any damage to the deep vasculature. A ~ 73% and ~ 206% increase (compared to untreated counterpart) was observed in the IgG titer of MNvo and MNvi treated dogs, respectively. The RVNA titer was increased by ~ 1.2 and ~ 2.2 times (compared to threshold value) after MNvo and MNvi treatment, respectively. CONCLUSION: MN-iontophoresis combination provided relatively potent immunogenic response over the conventional intramuscular injection, hence, can be used for administering vaccines transcutaneously.
Assuntos
Vacina Antirrábica , Ratos , Animais , Cães , Iontoforese/métodos , Parafina , Sefarose , Administração Cutânea , Pele , Sistemas de Liberação de Medicamentos , Agulhas , Imunoglobulina GRESUMO
This study aimed to prepare tamsulosin hydrochloride (HCl)-loaded in situ gelling formulation by using hydroxypropyl methylcellulose (HPMC), gellan gum, poloxamer 188, and benzalkonium chloride. Physicochemical evaluation of formulations included determination of pH, viscosity, gelation time, gel strength, drug content, and sterility. In silico study was performed to analyze interactions between polymers, drug, and mucin glycoprotein. In vitro degradation time, drug release, ex vivo mucoadhesion time, permeation, in vivo pharmacokinetics, and stability studies were performed to assess the formulation. Formulations were transparent and displayed acceptable physicochemical attributes. Tamsulosin HCl and polymers interacted via non-covalent interactions. HPMC formed hydrogen bonds, hydrophobic and van der Waals interactions with mucin protein while the drug formed hydrogen bonds only. Gel formulation degraded in simulated nasal fluid within 24 h. In situ gelling formulation showed 83.8 ± 1.7% drug release and remained adhered to the mucosa for 24.5 ± 1 h. A higher (~ 1.85 times) drug permeation was recorded through mucosa within 6 h by in situ gelling formulation when compared to control counterparts (aqueous solution of drug and in situ gelling formulation without poloxamer 188). Nasal administration of tamsulosin HCl by using in situ gelling formulation led to a ~ 3.3 and ~ 3.5 times, respectively, higher Cmax (maximum plasma concentration) and AUCtotal (total area under the curve) than the orally administered aqueous solution. Relative bioavailability of drug delivered by nasal in situ gelling formulation was 3.5 times the oral counterpart. These results indicated that the prepared in situ gelling formulation can act as a promising candidate for systemic administration of tamsulosin HCl.
Assuntos
Mucosa Nasal , Poloxâmero , Tansulosina/metabolismo , Poloxâmero/química , Administração Intranasal , Mucosa Nasal/metabolismo , Mucinas/metabolismo , Géis/química , Sistemas de Liberação de MedicamentosRESUMO
An analytical method for measurement of tamsulosin HCl from its different life cycle stages was developed using RP-HPLC technique. The elution of tamsulsoin was studied using MediterraneaTM Sea 18 column (dimesions 250 × 4.6 mm and pore size 5µm) and mobile phase comprising of buffer (pH 5.4): Acetonitrile (ACN) at ratio 60:40. The tamsolusin HCl elution was also studied by varying the operating conditions including the composition and flow rate of mobile phase, stationary phase temperature and scanning wavelength. The optimal elution conditions include; a) mobile phase flow rate; 1ml/min, b) wavelength; 224nm and stationary phase temperature 30°C. Linearity was recorded in the absorption data over tamsulosin concentration range of 0.007 to 40µg/ml. The values of paramters LOD and LOQ noted for tamsulosin dissolved in mobile phase were 0.0014 and 0.042µg/ml respectively, while for the counterpart in spiked plasma were 0.0017 and 0.051µg/ml respectively. The analytical method was prompt, accurate, reproducible and suitable for analysis of tamsulosin HCl in different samples of interest at formulation, regulation and clinical evaluations.
Assuntos
Cromatografia Líquida de Alta Pressão/métodos , Cromatografia de Fase Reversa/métodos , Tansulosina/química , Acetonitrilas/química , Indicadores e Reagentes/química , Limite de Detecção , Reprodutibilidade dos TestesRESUMO
Subtle and asymptomatic nature of high blood pressure results in increase in mortality and morbidity. Dentists may play a vital role in identifying patients with suspected hypertension who are not yet diagnosed to refer them timely to physicians for diagnosis and management of the condition. The aim of this study was to compare the oral health status using decayed, missing, filled teeth (DMFT) index and perceived stress score using perceived stress scale (PSS-10) between systemically healthy dental patients, and patients with undiagnosed and known hypertension attending dental out-patient department of Combined Military Hospital (CMH) Lahore Medical College & Institute of Dentistry, Lahore, Pakistan. It is a cross-sectional descriptive study in which 108 patients participated selected through purposive sampling method, 36 in each group. According to Kruskal Wallis H test, there were significant associations seen among the three groups with age (p < 0.001), DMFT (p < 0.001), and PSS-10 scores (p = 0.003). According to Spearman's matrix correlations, moderate positive correlations were observed between mean arterial pressure (MAP) and DMFT (r = 0.46, p < 0.001), and MAP and age (r = 0.38, p = 0.001), DMFT and PSS-10 (r = 0.47, p < 0.001), and DMFT and age (r = 0.33, p = 0.004) in healthy and patients with undiagnosed hypertension. It may be concluded that patients with raised blood pressure have higher perceived stress and deteriorated oral health.
Assuntos
Hipertensão , Saúde Bucal , Estresse Psicológico , Humanos , Hipertensão/diagnóstico , Hipertensão/psicologia , Masculino , Feminino , Adulto , Pessoa de Meia-Idade , Estudos Transversais , Estresse Psicológico/diagnóstico , Índice CPO , Paquistão/epidemiologia , Nível de Saúde , Testes Psicológicos , AutorrelatoRESUMO
Dentists face difficult situations and challenges every day, but undergraduate dental students in Pakistan are not formally taught leadership skills or assessed for these skills. This study aims to explore the perception of undergraduate dental students on various leadership competencies. A multi-institutional cross-sectional observational study was conducted on undergraduate students in five institutions by using universal sampling technique. Students were asked to self-assess various leadership competencies for dentists based on 15 competencies using a validated questionnaire utilizing Likert scale response format. Responses to these items were presented as frequency and percentage. The overall scores were presented in mean and standard deviation and median and interquartile range. The differences in median scores of all items of the questionnaire between male and female students were determined with Mann Whitney U tests. The year-wise differences in the median of all response items of the questionnaire were determined using Kruskal Wallis H test. A total of 750 students, of which 570 (76%) were females and 180 (24%) were males, participated in the study. Most of the students (n = 708, 94.4%) did not attended any leadership course or workshop in the last five years. Majority of the students perceived that their leadership competencies were fair to excellent. Empathy was perceived as 'excellent' by the majority of the students (n = 294, 39.2%). Majority of the students (n = 319, 42.5%) perceived that their 'authenticity' skills were 'good'. Statistically significant differences were reported between male and female students in most of the leadership skills including 'compassion', 'advocacy skills', 'inquiry skills', 'empathy', 'integrity', 'ability to build trust with others', 'managing conflict', 'leading groups/teams', 'dealing with difficult personalities', and 'likelihood to exercise leadership during a crisis' (p < 0.05). There were also significant differences in the median item scores in 13 out of 15 leadership domains and the year of study (p < 0.05). The study identified the perceptions of students regarding different leadership competencies. It gives indications that which leadership competencies need to be incorporated, promoted, and enhanced in leadership curriculum to make them effective dental practitioners and leaders in future. Incorporating these targeted leadership courses into the curriculum can provide participants with the opportunity to refine their existing leadership strengths and develop a well-rounded set of competencies essential for making a significant contribution in their chosen fields.
Assuntos
Liderança , Estudantes de Odontologia , Humanos , Masculino , Feminino , Estudantes de Odontologia/psicologia , Estudos Transversais , Inquéritos e Questionários , Paquistão , Adulto , Odontólogos/psicologia , Adulto Jovem , Educação em Odontologia/normas , Educação em Odontologia/métodosRESUMO
The role and opportunities presented by particulate technologies (due to novel processing methods and advanced materials) have multiplied over the last few decades, leading to promising and ideal properties for drug delivery. For example, the dissolution and bioavailability of poorly soluble drug substances and achieving site- specific drug delivery with a desired release profile are crucial aspects of forming (to some extent) state-of-the-art platforms. Atomisation techniques are intended to achieve efficient control over particle size, improved processing time, improved drug loading efficiency, and the opportunity to encapsulate a broad range of viable yet sensitive therapeutic moieties. Particulate engineering through atomization is accomplished by employing various mechanisms such as air, no air, centrifugal, electrohydrodynamic, acoustic, and supercritical fluid driven processes. These driving forces overcome capillary stresses (e.g., liquid viscosity, surface tension) and transform formulation media (liquid) into fine droplets. More frequently, solvent removal, multiple methods are included to reduce the final size distribution. Nevertheless, a thorough understanding of fluid mechanics, thermodynamics, heat, and mass transfer is imperative to appreciate and predict outputs in real time. More so, in recent years, several advancements have been introduced to improve such processes through complex particle design coupled with quality by-design (QbD) yielding optimal particulate geometry in a predictable manner. Despite these valuable and numerous advancements, atomisation techniques face difficulty scaling up from laboratory scales to manufacturing industry scales. This review details the various atomisation techniques (from design to mechanism) along with examples of drug delivery systems developed. In addition, future perspectives and bottlenecks are provided while highlighting current and selected seminal developments in the field.
RESUMO
This study aimed to prepare and assess active microneedle (MN) patches based on a novel biomaterial and their effective coupled (physical and electrical) transdermal delivery of a model drug (Linezoid). Modified MN patches (e.g. fabricated from Linezoid, boronated chitosan, polyvinyl alcohol and D-sorbitol) were engineered using a vacuum micromoulding method. Physicochemical, FTIR (Fourier transform infrared), in-silico, structural and thermal analysis of prepared formulations were conducted to ascertain MN quality, composition and integrity. In-vitro mechanical tests, membrane toxicity, drug release, antibiofilm, ex-vivo mucoadhesion, insertion and in-vivo antibiofilm studies were performed to further validate viability of the coupled system. Optimized MN patch formulation (CSHP3 - comprising of 3 % w/v boronated chitosan, 3.5 % w/v PVA and 10 % w/w D-sorbitol) exhibited sharp-tipped, equi-distant and uniform-surfaced micron-scaled projections with conforming physicochemical features. FTIR analysis confirmed modification (i.e., boronation) of chitosan and compatibility as well as interaction between CSHP3 constituents. In-silico analysis indicated non-covalent interactions between all formulation constituents. Moreover, boronated chitosan-mucin glycoprotein complex showed a stronger bonding (â¼1.86 times higher CScore) as compared to linezolid-mucin counterpart. Thermal analysis indicated amorphous nature of CSHP3. A â¼ 1.42 times higher tensile strength was displayed by CSHP3 as compared to control (i.e., pure chitosan, polyvinyl alcohol and D-sorbitol-based MN patch). Membrane toxicity study indicated non-toxic and physiological compatible nature of CSHP3. Within 90 min, 91.99 ± 2.3 % linezolid was released from CSHP3. During release study on agarose gel, CSHP3-iontophoresis treatment resulted in a â¼ 1.78 and â¼ 1.20 times higher methylene blue-covered area and optical density, respectively, within 60 min as compared to CSHP3 treatment alone. Staphylococcus aureus biofilms treated with CSHP3 exhibited 65 ± 4.2 % reduction in their mass. CSHP3 MN patches remained adhered to the rabbit oral mucosa for 6 ± 0.15 h. Mucosa treated with CSHP3 and CSHP3-iontophoresis combination showed a generation of pathways in the epithelium layers without any damage to the underlying lamina propria. Eradication of Staphylococcus aureus from oral mucosal wounds and complete tissue regeneration was recorded following 7-day treatment using CSHP3-iontophoresis coupled approach.
Assuntos
Antibacterianos , Biofilmes , Quitosana , Linezolida , Linezolida/química , Linezolida/farmacologia , Agulhas , Quitosana/química , Administração Cutânea , Masculino , Feminino , Animais , Coelhos , Fenômenos Químicos , Espectroscopia de Infravermelho com Transformada de Fourier , Temperatura , Sistemas de Liberação de Medicamentos , Staphylococcus aureus/efeitos dos fármacos , Administração Oral , Antibacterianos/química , Antibacterianos/farmacologiaRESUMO
Xerostomia is a subjective condition of dryness of the oral cavity that may lead to several oral problems deteriorating oral health-related quality of life. This study aimed to (1) determine the prevalence of xerostomia, (2) compare the general health status, unstimulated salivary flow rate, and oral health-related quality of life in xerostomics and non-xerostomics, and (3) investigate the potential of salivary aquaporin-3 (AQP-3) as a screening biomarker for xerostomia in patients with periodontal disease. Demographics and systemic health data were collected from 109 healthy participants, 20 to 55 years old, with Community Periodontal Index (CPI) score ≥ 3. For subjective assessment of xerostomia, Shortened Xerostomia Inventory (SXI) was used. For objective assessment of xerostomia, unstimulated salivary flow rate was measured. Shortened Oral Health Impact Profile (S-OHIP) was utilized for oral health-related quality of life assessment. The collected saliva samples were processed and stored at -80°C. Quantification of salivary AQP-3 protein was done with enzyme-linked immunosorbent assay. Xerostomia was reported in 78% of the subjects based on SXI score. Median concentration of AQP-3 was significantly higher in xerostomics compared to non-xerostomics, p = 0.001. Moreover, oral health-related quality of life was significantly poor in xerostomics compared to non-xerostomics, p = 0.002. Furthermore, there were significant correlations between AQP-3 and SXI (r = 0.21, p = 0.025), AQP-3 and S-OHIP (r = 0.2, p = 0.042), S-OHIP and SXI (r = 0.37, p < 0.001), unstimulated salivary flow rate and random blood glucose level (r = 0.32, p = 0.001), and body mass index and mean arterial pressure (r = 0.44, p < 0.001). Regression analysis showed that body mass index, CPI score 3, and salivary AQP-3 were suitable predictors for presence of xerostomia. AQP-3 could be a potential screening biomarker for xerostomia in patients with periodontal disease for its early identification may help improve oral health-related quality of life of the individuals.
Assuntos
Aquaporina 3 , Aquaporinas , Doenças Periodontais , Xerostomia , Adulto , Humanos , Pessoa de Meia-Idade , Adulto Jovem , Aquaporinas/metabolismo , Doenças Periodontais/epidemiologia , Qualidade de Vida , Saliva/química , Xerostomia/diagnóstico , Xerostomia/epidemiologia , Aquaporina 3/análise , Saúde BucalRESUMO
This study aimed to fabricate clarithromycin laden Eudragit S-100-based microfibers (MF), microfibers coated film (MB), clarithromycin loaded polyvinyl pyrollidone, hyaluronic acid and sorbitol-based dissolving microneedle patches (CP) and microfibers coated microneedle patches (MP). Morphological and phase analysis of formulations were carried out by scanning electron microscopy and differential scanning calorimetry, X-ray diffraction, respectively. Substrate liquefaction test, in vitro drug release, antimicrobial assay and in vivo antibiofilm studies were performed. MF exhibited a uniform surface and interconnected network. Morphological analysis of CP revealed sharp-tipped and uniform-surfaced microstructures. Clarithromycin was incorporated within MF and CP as amorphous solid. Liquefaction test indicated hyaluronate lyase enzyme responsiveness of hyaluronic acid. Fibers-based formulations (MF, MB and MP) provided an alkaline pH (7.4) responsive drug release; â¼79 %, â¼78 % and â¼81 %, respectively within 2 h. CP showed a drug release of â¼82 % within 2 h. MP showed â¼13 % larger inhibitory zone against Staphylococcus aureus (S. aureus) as compared to MB and CP. A relatively rapid eradication of S. aureus in infected wounds and subsequent skin regeneration was observed following MP application as compared to MB and CP indicating its usefulness for the management of microbial biofilms.
Assuntos
Claritromicina , Infecções Estafilocócicas , Humanos , Claritromicina/farmacologia , Staphylococcus aureus , Ácido Hialurônico/química , Sistemas de Liberação de Medicamentos , Administração Cutânea , Biofilmes , AgulhasRESUMO
The aim of this study was to fabricate celecoxib-loaded chitosan/guar gum (CS/GG) single (SC) and dual (DC) crosslinked hydrogel beads using the ionotropic gelation approach. The prepared formulations were evaluated for entrapment efficiency (EE%), loading efficiency (LE%), particle size and swelling studies. The performance efficiency was assessed by in vitro drug release, ex-vivo mucoadhesion, permeability, ex-in vivo swelling and in vivo anti-inflammatory studies. The EE% was found to be ~55% and ~44% for SC5 and DC5 beads, respectively. The LE% was ~11% and ~7% for SC5 and DC5 beads, respectively. The beads showed a matrix-like network with thick fibers. The particle size of beads ranged from ~2.74 to 1.91 mm. About 74% and 24% celecoxib was released from SC and DC hydrogel beads, respectively, within 24 h. The SC formulation showed higher %swelling and permeability than the DC counterpart, while the %mucoadhesion was relatively higher for DC beads. During the in vivo study, a significant decrease in the inflammation of the rat paw and inflammatory markers including C-reactive proteins (CRP) and interleukin-6 (IL-6) was observed following treatment with the prepared hydrogel beads; however, the SC formulation showed better therapeutic efficiency. In conclusion, celecoxib-loaded crosslinked CS/GG hydrogel beads can provide sustained drug release and act as potential candidates for managing inflammatory conditions.
RESUMO
Despite several novel and innovative approaches, clinical translation of oral insulin delivery into commercially viable treatment is still challenging due to its poor absorption and rapid degradation in GIT. Thus, an insulin-SDS hydrophobic ion pair loaded self-microemulsifying drug delivery system (SMEDDS) was formulated to exploit the hypoglycemic effects of orally delivered insulin. Insulin was initially hydrophobically ion paired with sodium dodecyl sulphate (SDS) to enhance its lipophilicity. The successful complexation of Insulin-SDS was confirmed by FTIR and surface morphology was evaluated using SEM. Stability of insulin after its release from HIP complex was evaluated using SDS PAGE. Subsequently, Ins-SDS loaded SMEDDS was optimized using two factorial designs. In vitro stability of insulin entrapped in optimized SMEDDS against proteolytic degradation was also assessed. Further, antidiabetic activity of optimized Ins-SDS loaded SMEDDS was evaluated in diabetic rats. Insulin complexed with SDS at 6:1 (SDS/insulin) molar ratio with almost five-fold increased lipophilicity. The SMEDDS was optimized at 10% Labraphil M2125 CS, 70% Cremophore EL, and 20% Transcutol HP with better proteolytic stability and oral antidiabetic activity. An Ins-SDS loaded SMEDDS was successfully optimized. Compared with insulin and Ins-SDS complex, the optimized SMEDDS displayed considerable resistance to GI enzymes. Thus, the SMEDDS showed potential for effective delivery of macromolecular drugs with improved oral bioavailability.
RESUMO
Objective: More than a year ago, Pakistan like the rest of the word, was hit by a global pandemic, due to which students of higher education had to accept the new era and adapt to the electronic learning environment for the very first time. This study aims to analyze the perceptions of medical, dental, and allied health students about e-learning in Pakistan. Methods: A descriptive, cross-sectional study was conducted throughout the country. A pre-validated, anonymous online questionnaire regarding demographics, past-experience of e-learning, advantages disadvantages of e-learning, and general perception of students towards e-learning was distributed. Descriptive statistics were computed for all demographics. Chi-square test was used to compare the differences of perceptions between pre-clinical year and clinical years students. Chi-square was used to compare overall category-wise positive and negative responses of students. The association between participant demographics and their perception towards e-learning was also calculated using chi square. Results: A total of 1200 students participated in the study of which 797 (66.4%) were from pre-clinical years and 403 (33.6%) were from clinical years. The major advantage identified by all students was the 'comfortable environment' (70%) and 'technical problems with IT equipment' was listed as the biggest disadvantage (89%) of e-learning. For preclinical year students, 'anxiety due to social isolation' was selected as the biggest issue (p < 0.05) whereas, for clinical year students, it was 'lack of patient interaction' (p < 0.05). Overall, 72% of students had a negative perception of e-learning. Conclusion: After more than a year of online studying, medical and allied students of Pakistan have expressed dissatisfaction towards e-learning. Student-teacher training, student counselling sessions, and innovative techniques need to be introduced to enhance student engagement and reduce pandemic stress.
RESUMO
OBJECTIVE: Xerostomia may result in several oral conditions, which ultimately affect oral health-related quality of life (OHRQOL). This study aims to evaluate the relationship of stress, xerostomia, salivary flow rate, and OHRQOL among young adults. METHOD: We invited 72 participants to complete three validated questionnaires including the Perceived Stress Scale-10 (PSS-10), a shortened version of the Xerostomia Inventory (SXI), and the shortened Oral Health Impact Profile (S-OHIP). Unstimulated saliva was collected, and flow rate was determined. Based on the SXI scores and hyposalivation, the participants were categorised into four groups: subjective xerostomia, subjective and objective xerostomia, objective xerostomia, and true non-xerostomia. Based on the median PSS score, participants were categorised into high stress and low stress groups. Data were analysed using the Mann-Whitney U test, Kruskal-Wallis H test, and Spearman's correlation coefficient. A p value of 0.05 was set for all tests. RESULTS: A significant difference was observed in the unstimulated salivary flow rate (χ2(3) = 26.677, p < 0.001) and PSS scores (X2(3) = 8.552, p = 0.036) between xerostomia groups, while OHIP scores were not statistically different (X2(3) = 5.488, p = 0.139). A significant correlation was observed between SXI and S-OHIP scores (r = 0.348, p = 0.003) and unstimulated salivary flow rate and PSS (r = -0.259, p = 0.028). CONCLUSION: This study shows that perceived stress can influence salivary flow rate. Among the xerostomia groups, stress scores and salivary flow rates varied significantly. Additionally, subjective xerostomia has an impact on OHRQOL.
RESUMO
Students have unique preferences when it comes to knowledge acquisition, information processing, retention in memory, and recall. This study is aimed at examining the preferred learning styles of medical and dental undergraduate students of Pakistan. It is also aimed at investigating the influence of gender, preclinical or clinical academic year, and academic record on the preferred learning style. A descriptive cross-sectional study was conducted in Pakistan. The learning styles of undergraduate students were identified using visual, aural, read/write, and kinesthetic (VARK) questionnaire. Students were also asked about their satisfaction towards teaching style of their teachers in institute. Descriptive statistics were done to characterize the learning styles of the students. The Fisher test and chi-square test were used to compare the learning preferences between genders and public/private sector students and among preclinical/clinical years. A p value of less than 0.05 was considered significant. A total of 1473 students participated in the study. Among the students, 39.37% preferred unimodal learning style whereas 60.62% preferred multimodal style. Kinesthetic (K) and visual (V) were the most preferred unimodal styles. The preferred learning styles of female students are aural (A), visual (V), and kinesthetic (K), whereas male students preferred visual (V) and kinesthetic more (K). Students with lower academic record chose unimodal styles in comparison to high achievers that chose multimodal styles. Students of clinical year preferred multimodal and quadmodal styles in comparison to preclinical year students. An alarming 78% of students were dissatisfied with their teacher's instructional style. Majority of students prefer multimodal learning styles over unimodal style. Gender, public/private sector, and academic record have influence on the preference of learning styles. Majority of the students are dissatisfied with their teacher's instructional style and rely on social media platforms for understanding. Academics need to adapt their teaching methods according to student preferences in order to get better graduates.