TiO2/MWCNT/Nafion-Modified Glassy Carbon Electrode as a Sensitive Voltammetric Sensor for the Determination of Hydrogen Peroxide.

In this work we describe a straightforward approach for creating a nanocomposite comprising multiwalled carbon nanotubes (MWCNTs) and titanium dioxide (TiO2) using the hydrothermal technique, which is then characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectrometer (EDS), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) to assess its properties. Nafion is employed as a reticular agent for the nanocomposite on the glassy carbon electrode (GCE), creating the MWCNT/TiO2/Nafion/GCE system. The electrochemical behavior of the system was evaluated using cyclic voltammetry, revealing its remarkable electrocatalytic activity for detecting hydrogen peroxide in water. The developed sensor showcased a broad linear response range of 14.00 to 120.00 µM, with a low detection limit of 4.00 µM. This electrochemical sensor provides a simple and highly sensitive method for detecting hydrogen peroxide in aqueous solutions and shows promising potential for various real-world applications, particularly in H2O2 monitoring.

Studies of antimicrobial resistance in rare mycobacteria from a nosocomial environment.

BACKGROUND: Nontuberculous mycobacteria (NTM) are ubiquitous in nature and recognized agents of opportunistic infection, which is often aggravated by their intrinsic resistance to antimicrobials, poorly defined therapeutic strategies and by the lack of new drugs. However, evaluation of their prevalence in anthropogenic environments and the associated antimicrobial resistance profiles have been neglected. In this work, we sought to determine minimal inhibitory concentrations of 25 antimicrobials against 5 NTM isolates recovered from a tertiary-care hospital surfaces. Antimicrobial susceptibilities of 5 other Corynebacterineae isolated from the same hospital were also determined for their potential clinical relevance. RESULTS: Our phylogenetic study with each of the NTM isolates confirm they belong to Mycobacterium obuense, Mycobacterium mucogenicum and Mycobacterium paragordonae species, the latter initially misidentified as strains of M. gordonae, a species frequently isolated from patients with NTM disease in Portugal. In contrast to other strains, the M. obuense and M. mucogenicum examined here were resistant to several of the CLSI-recommended drugs, suggestive of multidrug-resistant profiles. Surprisingly, M. obuense was susceptible to vancomycin. Their genomes were sequenced allowing detection of gene erm (erythromycin resistance methylase) in M. obuense, explaining its resistance to clarithromycin. Remarkably, and unlike other strains of the genus, the Corynebacterium isolates were highly resistant to penicillin, ciprofloxacin and linezolid. CONCLUSIONS: This study highlights the importance of implementing effective measures to screen, accurately identify and control viable NTM and closely related bacteria in hospital settings. Our report on the occurrence of rare NTM species with antibiotic susceptibility profiles that are distinct from those of the corresponding Type strains, along with unexpected resistance mechanisms detected seem to suggest that resistance may be more common than previously thought and also a potential threat to frail and otherwise vulnerable inpatients.

Phase Separation of Dirac Electrons in Topological Insulators at the Spatial Limit.

In this work we present unique signatures manifested by the local electronic properties of the topological surface state in Bi2Te3 nanostructures as the spatial limit is approached. We concentrate on the pure nanoscale limit (nanoplatelets) with spatial electronic resolution down to 1 nm. The highlights include strong dependencies on nanoplatelet size: (1) observation of a phase separation of Dirac electrons whose length scale decreases as the spatial limit is approached, and (2) the evolution from heavily n-type to lightly n-type surface doping as nanoplatelet thickness increases. Our results show a new approach to tune the Dirac point together with reduction of electronic disorder in topological insulator (TI) nanostructured systems. We expect our work will provide a new route for application of these nanostructured Dirac systems in electronic devices.

Hospital microbial surface colonization revealed during monitoring of Klebsiella spp., Pseudomonas aeruginosa, and non-tuberculous mycobacteria.

Hospital environmental conditions, human occupancy, and the characteristics of the equipment influence the survival of microbial communities and raise a concern with regard to nosocomial infections. The objective of the present work was to use the monitoring of Pseudomonas aeruginosa, Klebsiella spp. and non-tuberculous mycobacteria as a strategy to improve knowledge on microbial colonization of non-critical equipment and surfaces, in a tertiary hospital from Central Portugal. A 3-month microbiological survey was performed in a district teaching hospital. A total of 173 samples were obtained from the wards Hematology, Urology, Medicine, and Renal Transplants, and 102 presumptive strains recovered. Per sampling, Pseudomonas Isolation agar showed 42.8 to 73.3% of presumptive P. aeruginosa colonies and MacConkey agar recovered mostly Staphylococcus. Most of the colonies recovered in Middlebrook 7H10-PANTA belonged to the genus Methylobacterium. Taps and WC shower curtains carry high bacterial species diversity. The Redundancy Analysis grouped the samples in those mostly handled by patients, and those mostly handled by healthcare staff or of mixed use. This study shows that the preferential users of the space and equipment seem to be important contributors to the microbial community. The most recovered genus was Methylobacterium, known as colonizer of the water distribution system therefore, it is possible that the water points and biofilms in taps also contribute as dispersion hotspots.

Temperature-induced coexistence of a conducting bilayer and the bulk-terminated surface of the topological insulator Bi2Te3.

Topological insulators such as Bi2Se3 and Bi2Te3 have extremely promising transport properties, due to their unique electronic behavior: they are insulators in the bulk and conducting at the surface. Recently, the coexistence of two types of surface conducting channels has been observed for Bi2Se3, one being Dirac electrons from the topological state and the other electrons from a conventional two-dimensional gas. As an explanation for this effect, a possible structural modification of the surface of these materials has been hypothesized. Using scanning tunneling microscopy we have directly observed the coexistence of a conducting bilayer and the bare surface of bulk-terminated Bi2Te3. X-ray crystal truncation rod scattering was used to directly show the stabilization of this epitaxial bilayer which is primarily composed of bismuth. Using this information, we have performed density functional theory calculations to determine the electronic properties of the possible surface terminations. They can be used to understand recent angular resolved photoemission data which have revealed this dual surface electronic behavior.

Prediction of enzymatic function with high efficiency and a reduced number of features using genetic algorithm.

The post-genomic era has raised a growing demand for efficient procedures to identify protein functions, which can be accomplished by applying machine learning to the characteristics set extracted from the protein. This approach is feature-based and has been the focus of several works in bioinformatics. In this work, we investigated the characteristics of proteins, representing the primary, secondary, tertiary, and quaternary structures of the protein, that improve the model's quality by applying dimensionality reduction techniques and using the Support Vector Machine classifier for predicting the enzymes' classes. During the investigation, two approaches were evaluated: feature extraction/transformation, which was performed using the statistical technique Factor Analysis, and feature selection methods. For feature selection, we proposed an approach based on a genetic algorithm to face the optimization conflict between the simplicity and reliability of an ideal representation of the characteristics of the enzymes and also compared and employed other methods for this purpose. The best result was accomplished using a feature subset generated by our implementation of a multi-objective genetic algorithm enriched with features that this work identified as relevant to represent the enzymes. This subset representation reduced the dataset by about 87% and reached 85.78% of F-measure performance, improving the overall quality of the model classification. In addition, we verified in this work a subset addressed with only 28 features out of a total of 424 that reached a performance above 80% of F-measure for four of the six evaluated classes, showing that satisfactory classification performance can be achieved with a reduced number of enzymes's characteristics. The datasets and implementations are openly available.

Validity of two methods for estimation of vertical jump height.

The objectives of this study were (a) to determine the concurrent validity of the flight time (FT) and double integration of vertical reaction force (DIF) methods in the estimation of vertical jump height with the video method (VID) as reference; (b) to verify the degree of agreement among the 3 methods; (c) to propose regression equations to predict the jump height using the FT and DIF. Twenty healthy male and female nonathlete college students participated in this study. The experiment involved positioning a contact mat (CTM) on the force platform (FP), with a video camera 3 m from the FP and perpendicular to the sagittal plane of the subject being assessed. Each participant performed 15 countermovement jumps with 60-second intervals between the trials. Significant differences were found between the jump height obtained by VID and the results with FT (p ≤ 0.01) and DIF (p ≤ 0.01), showing that the methods are not valid. Additionally, the DIF showed a greater degree of agreement with the reference method than the FT did, and both presented a systematic error. From the linear regression test was determined the prediction equations with a high degree of linearity between the methods VID vs. DIF (R = 0.988) and VID vs. FT (R = 0.979). Therefore, the prediction equations suggested may allow coaches to measure the vertical jump performance of athletes by the FT and DIF, using a CTM or an FP, which represents more practical and viable approaches in the sports field; comparisons can then be made with the results of other athletes evaluated by VID.

The effect of different work-rest schedules on ergonomic risk in poultry slaughterhouse workers.

BACKGROUND: Rest breaks are an organizational measure to reduce the high risk of upper limb work-related musculoskeletal disorders (UL-WMSDs) to which slaughterhouse workers are subject. OBJECTIVE: To analyze the effect of different work-rest schedules on ergonomic risk in poultry slaughterhouse workers. METHODS: A total of 36 repetitive tasks was selected in a Brazilian slaughterhouse. Using the Occupational Repetitive Action (OCRA) Checklist, the level of exposure of workers to risk factors of UL-WMSDs in two work-rest schedules was evaluated. In the real condition, 6 rest breaks of 10 minutes were performed, and in the simulated condition, 3 rest breaks of 20 minutes. RESULTS: The right side of the body presented a higher score on the OCRA Checklist (72%of the tasks) than the left side (p = 0.037) in the real condition. Additionally, the OCRA score (18.3±2.5) was significantly lower (p < 0.001) than the simulated condition (21.9±3.0). It was verified that the risk level in simulated condition remained the same in 13 (36%) tasks, while in 23 (64%) tasks there was an increase in the risk level. CONCLUSIONS: Work-rest schedule of 6 breaks of 10 minutes was better than 3 breaks of 20 minutes to reduce the risk of UL-WMSDs in poultry slaughterhouse workers.

Exertion Perception When Performing Cutting Tasks in Poultry Slaughterhouses: Risk Assessment of Developing Musculoskeletal Disorders.

Brazil is the leader in poultry meat exports, in which most products are in the form of cuts. This study analyzed the exertion perception of poultry slaughterhouses workers when performing cutting tasks, as well as the influence of knife sharpness on the risk of developing musculoskeletal disorders by Occupational Repetitive Action (OCRA) method. Participants (n = 101) from three slaughterhouses were asked to rate their perceived exertion on the Borg scale during the cutting task when the knife was well and poorly sharpened. The OCRA results showed that the score for cutting with a dull knife was greater (43.57 ± 13.51) than with a sharp knife (23.79 ± 3.10) (p < 0.001). Consequently, there was a significant increase in the risk level of acquiring upper-limb work-related musculoskeletal disorders (UL-WMSD) by using a "poorly sharpened" knife (29%; p < 0.001; Borg scale 2-8). Thus, maintaining well-sharpened knives for optimal performance of the cutting task (fewer technical actions) is suggested, as well as including knife sharpening in the standard operating procedure to reduce musculoskeletal disorders.

Portland Cement/Acrocomia Aculeata Endocarp Bricks: Thermal Insulation and Mechanical Properties.

In the last few decades, Portland/residue composites have been researched due to their technological and environmental advantages. In this study, residues of Acrocomia aculeata (Jacq.) Lodd endocarp (AE) were introduced in the Portland cement-soil (PC) matrix in different concentrations (0, 5, 10, 15, 20, and 50 wt%) to produce PC/AE bricks. The characterization of the microstructures of the bricks indicate agglomerates of AE particles with increased humidity in small regions distributed throughout the matrix. Mid-infrared and laser-induced breakdown spectroscopy, along with thermogravimetry, indicated that AE contained mainly lignin and cellulose, as well as inorganic chemical elements such as Mg and Si. X-ray studies revealed that AE did not affect the crystallographic properties of the Portland/AE bricks. The findings indicate that the use of AE improved the thermal insulation capability of the composites with a small impact on the compressive strength.

Association between perception of bodily discomfort and individual and work organisational factors in Brazilian slaughterhouse workers: a cross-sectional study.

OBJECTIVE: Brazil is the world's second largest poultry meat producer and leading exporter. Many poultry processing tasks are physically demanding and involve factors that increase the risk of developing a work-related musculoskeletal disorder (WMSD). However, little is known about the assessment of bodily discomfort in these workers. The aim of this study was to evaluate the association between perception of bodily discomfort and individual and work organisational factors in poultry slaughterhouse workers. DESIGN: Descriptive, cross-sectional study. SETTING: Three poultry slaughterhouses in the South of Brazil. PARTICIPANTS: This paper included 925 workers of 3 poultry slaughterhouses, 575 women and 350 men. The selection of the participants was random. MAIN OUTCOME MEASURE: Workers were asked about individual factors, work organiation, perception of bodily discomfort and cold, as well as ingestion of pain medication. Crude and adjusted ORs were estimated and 95% CIs were derived from binary logistic regression analysis for perception of bodily discomfort. RESULTS: There was a significant association (p<0.05) between perception of bodily discomfort and female gender (OR=1.77; 95% CI 1.30 to 2.41), performance of repetitive tasks (OR=1.81; 95% CI 1.12 to 2.91) and perception of cold (OR=2.05; 95% CI 1.44 to 2.91). CONCLUSIONS: The findings of this research demonstrated that the sector of occupational safety and health management in poultry slaughterhouses should monitor the symptoms of WMSD among their workers, especially female workers, workers who perform repetitive tasks, as well as those who perform tasks in cold environments because these groups are more likely to experience bodily discomfort.

Aquatic exercise and Far Infrared (FIR) modulates pain and blood cytokines in fibromyalgia patients: A double-blind, randomized, placebo-controlled pilot study.

Fibromyalgia (FM) has an inflammatory component, as elevated serum levels of inflammatory biomarkers are associated with its diagnosis. Treatments decreased pain, body temperature, improved quality of life and reduced serum levels of IL-6 in both groups; however, these beneficial effects were more pronounced in aquatic exercise (AE) + Far-Infrared (FIR) group. The findings of the present study suggest that the association of AE to FIR increases the benefits of aquatic exercise in patients with FM.

An antibody based approach for multi-coloring osteogenic and chondrogenic proteins in tissue engineered constructs.

When tissue engineering strategies rely on the combination of three-dimensional (3D) polymeric or ceramic scaffolds with cells to culture implantable tissue constructs in vitro, it is desirable to monitor tissue growth and cell fate to be able to more rationally predict the quality and success of the construct upon implantation. Such a 3D construct is often referred to as a 'black-box' since the properties of the scaffolds material limit the applicability of most imaging modalities to assess important construct parameters. These parameters include the number of cells, the amount and type of tissue formed and the distribution of cells and tissue throughout the construct. Immunolabeling enables the spatial and temporal identification of multiple tissue types within one scaffold without the need to sacrifice the construct. In this report, we concisely review the applicability of antibodies (Abs) and their conjugation chemistries in tissue engineered constructs. With some preliminary experiments, we show an efficient conjugation strategy to couple extracellular matrix Abs to fluorophores. The conjugated probes proved to be effective in determining the presence of collagen type I and type II on electrospun and additive manufactured 3D scaffolds seeded with adult human bone marrow derived mesenchymal stromal cells. The conjugation chemistry applied in our proof of concept study is expected to be applicable in the coupling of any other fluorophore or particle to the Abs. This could ultimately lead to a library of probes to permit high-contrast imaging by several imaging modalities.

The Use of Personal Protective Equipment: Finger Temperatures and Thermal Sensation of Workers' Exposure to Cold Environment.

This study analyzed the finger temperatures of poultry slaughterhouse workers and its association with personal and organizational variables, bodily discomfort perception, and cold thermal sensation. The study included 143 poultry slaughterhouse workers. A thermograph was used to measure finger temperature and an interview to collect worker data. There were two groups: workers who used a tool and those without. The binary logistic regression, Friedman and Wilcoxon tests were used (p ≤ 0.05). Most workers presented at least one finger with an average temperature ≤15 °C (66.4%) and ≤24 °C (99.3%), perceived their cold hands, and wore three overlapping gloves (57.3%). There were no associations between finger temperatures (≤15 °C) and the analyzed variables. The chance of feeling cold for a worker who used a tool was greater than for a worker who did not (OR = 3.19, 95% CI 1.46; 6.94). There was a difference between the finger temperatures of each hand on both surfaces and the analyzed groups (p < 0.01). The temperature of each finger with its respective contralateral was different in the little fingers (no tool), index, middle, ring, and little fingers (using a tool) (p < 0.05). The use of several overlapping gloves was not sufficient to promote thermal insulation of the hands.

Investigation of musculoskeletal symptoms in a manufacturing company in Brazil: a cross-sectional study.

BACKGROUND: Musculoskeletal disorders are prevalent and represent the most common health problem among the working population in industrially-developing countries, with considerable costs and impact on quality of life. Despite the high incidence of disability insurance claims among Brazilian manufacturing-sector workers, only a few studies assessed musculoskeletal disorders prevalence. OBJECTIVE: To provide information on the prevalence of musculoskeletal disorders among manufacturing-sector workers and to explore the relationship between musculoskeletal disorders and sociodemographic and occupational characteristics in a medium metallurgical company located in Brazil. METHODS: A cross-sectional study was carried out. Data was collected through the use of a specifically-designed questionnaire and the items used to collect musculoskeletal disorders data were based on the Nordic Musculoskeletal Questionnaire. Descriptive statistics were used and multivariate logistic regression analysis (p<0.02) was performed to explore the associations between musculoskeletal disorders and potential risk factors. RESULTS: The upper limb was the most frequently affected body region among manufacturing-sector workers: shoulder (24.8%), elbow and/or forearm (15.5%), wrist and/or hand (19.0%). Adjusted logistic regression analysis showed that company experience (p=0.02), presence of sleep disorders (p=0.00), self-reported general health state (p=0.00) and perform work pause (p=0.00) were significant risk factors for development of musculoskeletal disorders. CONCLUSION: Sociodemographic and work-related aspects are influential risk factors for musculoskeletal disorders. These results add comprehension about musculoskeletal disorders prevalence and suggest a need for greater emphasis on prevention strategies.

Thermographic Evaluation of the Hands of Pig Slaughterhouse Workers Exposed to Cold Temperatures.

Brazil was rated the fourth leading producer and exporter of pork meat in the world. The aim of this study was to evaluate the temperature of the hands of pig slaughterhouse workers and its relation to the thermal sensation of the hands and the use of a cutting tool. The study included 106 workers in a pig slaughterhouse. An infrared camera FlirThermaCAM E320 (Flir Systems, Wilsonville, OR, USA) was used to collect the images of the dorsal and palmar surfaces of both hands. A numerical scale was used to obtain the thermal sensation. Chi-square test, Pearson correlation and Student's t test or Wilcoxon were used (p ≤ 0.05). The majority of workers felt cold in the hands (66%) and workers who used the knife felt the coldest. There was an association between the thermal sensation and the use of knife (p = 0.001). Workers who used the tool showed correlation between the thermal sensation and the temperatures of the left fingers, with a difference between the temperatures of the right and left hands of those who used the knife (p ≤ 0.05). The hands (left) that manipulated the products presented the lowest temperatures. Findings indicate that employers of pig slaughterhouses should provide gloves with adequate thermal insulation to preserve the health of workers' hands.

Clinical evaluation of patients submitted to osteogenic distraction in the lower limb at a university hospital.

OBJECTIVE: To evaluate the clinical characteristics from patients submitted to osteogenic distraction to correct bone gap at a university hospital. METHODS: Retrospective transversal study, with a convenience sample, from 2000 to 2012, evaluating clinical aspects of patients treated, submitted to osteogenic distraction (bone transport) with Ilizarov's external fixation device. The chi-squared, Fisher's, and Mann-Whitney's U tests were used with a 5% level of significance (p < 0.05). RESULTS: 33 patients were studied, of whom 28 men (84.8%). The more frequent age was from 21 to 40 years. Most patients were from the metropolitan region of the capital (57.6%). The leg was the most affected limb (75.8%), and the left side was the most affected (66.7%). The most common cause was infected pseudoarthrosis (75.8%). The most common bone transportation type was bifocal (75.8%). Mean previous surgery at others institutions were 2.62 (1.93 standard deviation), and mean surgeries after treatment were 1.89 (1.29 standard deviation). Ilizarov's external fixation device was used for 1.94 years (1.34 mean deviation), from one to six years. The most common complications were pin infection (57.6%), equinus (30.3%), deep infection (24.2%), and shortening (21.2%). CONCLUSION: Osteogenic distraction for bone gaps were more frequent in young adults, men, in the leg, with bifocal transportation, after several previous surgeries, treated for a mean of two years, with many complications (infections were the most common).

OBJETIVO: Avaliar as características clínicas dos pacientes submetidos à distração osteogênica por falha óssea em hospital universitário. MÉTODOS: Estudo transversal, retrospectivo, com amostra de conveniência, de 2000 a 2012, das características clínicas de pacientes tratados e submetidos à distração osteogênica (transporte ósseo) com uso de fixador externo circular tipo Ilizarov. Foram usados os testes de qui-quadrado, exato de Fisher e U de Mann­Whitney, com nível de significância de 5% (p < 0,05). RESULTADOS: Foram 33 casos, 28 homens (84,8%). A idade mais frequente foi entre 21 e 40 anos. A maioria dos pacientes (57,6%) era da região metropolitana. O segmento mais afetado foi a perna (75,8%) e o lado foi o esquerdo (66,7%). A causa mais frequente foi a pseudoartrose infectada (75,8%). O tipo de transporte ósseo feito foi principalmente o bifocal (75,8% dos casos). A média de procedimentos prévios em outra instituição foi de 2,62 cirurgias (desvio padrão de 1,93) e a dos feitos após o início do tratamento foi de 1,89 cirurgia (desvio padrão de 1,29). O tempo de uso de fixador externo foi de 1,94 ano (desvio padrão de 1,34), com mínimo de um ano e máximo de seis. As quatro complicações mais encontradas foram infecção de base de pinos (57,6% dos casos), equino (30,3%), infecção profunda (24,2%) e encurtamento (21,2%). CONCLUSÃO: A necessidade de distração osteogênica por falhas ósseas foi mais frequente em adultos jovens, homens, na perna, com transporte bifocal, após múltiplas cirurgias prévias, com média de aproximadamente dois anos de tratamento e com várias complicações (as infecções foram as principais).

Development and validation of instrument for ergonomic evaluation of tablet arm chairs.

The purpose of this study was to develop and validate an evaluation instrument for tablet arm chairs based on ergonomic requirements, focused on user perceptions and using Item Response Theory (IRT). This exploratory study involved 1,633 participants (university students and professors) in four steps: a pilot study (n=26), semantic validation (n=430), content validation (n=11) and construct validation (n=1,166). Samejima's graded response model was applied to validate the instrument. The results showed that all the steps (theoretical and practical) of the instrument's development and validation processes were successful and that the group of remaining items (n=45) had a high consistency (0.95). This instrument can be used in the furniture industry by engineers and product designers and in the purchasing process of tablet arm chairs for schools, universities and auditoriums.

Body discomfort in poultry slaughterhouse workers.

Brazil has the main producers and exporters of chicken meat, which is classified as the third largest world chicken meat producer and lead exporter. This study aimed at analyzing the body discomfort perception in poultry slaughterhouse workers and its associations with the task characteristics. The study included 290 workers, 200 women (34.7 ± 7.7 years) and 90 men (36.8 ± 8.2 years). A body map for evaluating discomfort and an interview regarding organizational issues and criteria of the OCRA method were used. Descriptive statistics and chi-square test (p ≤ 0.05) were used. It was found that 87.6% of respondents performed repetitive tasks, 86.2% performed rest breaks, 82.8% performed job rotation (2-7 tasks) and 61% used tools. It was also found that 67.2% felt discomfort in at least one body region, and the symptoms most often reported were pain, fatigue and tingling. The body regions most frequently cited were: shoulders (62.6%), neck (46.2%), spine (36.4%), forearms (31.3%), arms (29.2%), wrists (25.6%) and hands (25.6%). In sectors artificially cold (n = 204), 54.1% felt cold. There was no association between body discomfort and gender, task characteristics, performance of rest breaks and job rotation, use of tools and time working in the company; however, there was association with cold perception (p = 0.035).

Influence of anthropometry on meat-packing plant workers: an approach to the shoulder joint.

This study was conducted with 90 poultry slaughterhouse workers, which perform the function of removing chicken parts from the conveyor belt, and sample was composed of 66 women (33.5 ± 6.5 years) and 24 men (35.7 ± 7.2 years), aiming to analyze the influence of anthropometry in the shoulder joint of these workers. Body discomfort was evaluated by a human body diagram, being applied at the end of the work shift. The anthropometric measurement of shoulder was performed by measuring the height of the acromion process, being compared with the height of the conveyor belt. Analysis of the results was performed by descriptive statistics, mean, standard deviation, percentage and percentiles 5%, 50% and 95%. It was found that the height of the conveyor belt was 1.74 meters, while the average shoulder height of workers was 1.38 meters for percentile 5%, 1.41 meters for percentile 50% and 1.65 meters for percentile 95%. The discomfort regions were shoulder 45%, neck 29%, column 26%, arms 23%, and wrists and hand 20%. The upper limb assessment was performed with percentile 5% through the Rapid Upper Limb Assessment method, resulting in a final score > 7, indicating the need for adjustments of the work organization. It was concluded that the workplace does not meet the workers' anthropometric characteristics, mainly affecting the shoulder joint, and correction ergonomics becomes necessary so that the workers involved in this study can perform their functions with health, comfort and safety.