RESUMO
A multi-functional polymer-carbon nanotube (CNT) nanocable with a hierarchical structure is fabricated by grafting poly (glycidyl methacrylate) (PGMA) from the CNT surface via activators regenerated by electron transfer atom transfer radical polymerization. Multiple CNTs are arranged in parallel in the fabricated nanocable and exhibit strong binding force with sheathing PGMA. In situ mechanical and electrical tests conducted on an individual nanocable reveal its high flexibility and excellent surface insulation, with an electrical resistance of approximately 1 GΩ. On increasing the voltage to the nanocable's electrical breakdown point, nanoscale electrical trees are observed. Such degradation behavior is discussed in the wider context of breakdown mechanisms in polymer based CNTs.
RESUMO
Modern electrical applications urgently need flexible polymer films with a high dielectric constant (εr) and low loss. Recently, the MXene-filled percolative composite has emerged as a potential material choice because of the promised high εr. Nevertheless, the typically accompanied high dielectric loss hinders its applications. Herein, a facile and effective surface modification strategy of cladding Ti3C2Tx MXene (T = F or O; FMX) with fluorographene (FG) via self-assembly is proposed. The obtained FMX@FG hybrid yields high εr (up to 108 @1 kHz) and low loss (loss tangent tan δ = 1.16 @ 1 kHz) in a ferroelectric polymer composite at a low loading level (the equivalent of 1.5 wt % FMX), which is superior to its counterparts in our work (e.g., FMX: εr = 104, tan δ = 10.71) and other studies. It is found that the FG layer outside FMX plays a critical role in both the high dielectric constant and low loss from experimental characterizations and finite element simulations. For one thing, FG with a high F/C ratio would induce a favorable structure of high ß-phase crystallinity, extensive microcapacitor networks, and abundant interfacial dipoles in polymer composites that account for the high εr. For another, FG, as a highly insulating layer, can inhibit the formation of conductive networks and inter-FMX electron tunneling, which is responsible for conduction loss. The results demonstrate the potential of a self-assembled FMX@FG hybrid for high εr and low loss polymer composite films and offer a new strategy for designing advanced polymer composite dielectrics.
RESUMO
OBJECTIVE: Abdominal aortic aneurysm (AAA) is characterized by vascular smooth muscle cell (VSMC) injury. Circ_0000285 has been declared to drive cancer development, but its role in AAA remains unclear. We thus intended to disclose circ_0000285's role and molecular mechanism in AAA. METHODS: VSMCs were exposed to hydrogen peroxide (H2O2) to induce cell injury. Circ_0000285, miR-599, and regulator of G protein signaling 17 (RGS17) mRNA expressions were ascertained by conducting RT-qPCR assay while the levels of RGS17 protein was ascertained via western blotting. MiR-599's predicted binding with circ_0000285 and RGS17 were validated by means of the dual-luciferase reporter experiment. Cell proliferation was evaluated through the CCK-8 and EdU assays. Cell apoptosis was assessed via the caspase-3 activity assay. RESULTS: The AAA samples and H2O2-treated VSMCs manifested high expressions of circ_0000285 and RGS17 as well as a poor miR-599 expression. H2O2 treatment impaired the proliferation of VSMCs while stimulating their apoptosis. Circ_0000285 overexpression further repressed cell proliferation and enhanced apoptosis in H2O2-treated VSMCs while miR-599 enrichment partly reversed these effects. Circ_0000285 directly bound to miR-599, and miR-599 interacted with RGS17 3'UTR. RGS17 overexpression also suppressed cell proliferation and stimulated apoptosis in H2O2-treated VSMCs. Nevertheless, these effects were offset by miR-599 enrichment. CONCLUSION: Circ_0000285 governed the miR-599/RGS17 network to regulate H2O2-induced VSMC injuries, thereby promoting the development of AAA.
Assuntos
Aneurisma da Aorta Abdominal , MicroRNAs , Proteínas RGS , Humanos , MicroRNAs/genética , Músculo Liso Vascular/metabolismo , Músculo Liso Vascular/patologia , Peróxido de Hidrogênio/farmacologia , Transdução de Sinais , Aneurisma da Aorta Abdominal/genética , Aneurisma da Aorta Abdominal/metabolismo , Aneurisma da Aorta Abdominal/patologia , Proliferação de Células/genética , Apoptose , Proteínas RGS/metabolismo , Proteínas RGS/farmacologiaRESUMO
The demand for high-performance dielectrics has increased due to the rapid development of modern electric power and electronic technology. Composite dielectrics, which can overcome the limitations of traditional single polymers in thermal conductivity, dielectric properties and mechanical performance, have received considerable attention. In this study, we report a multifunctional nanocomposite material fabricated by blending fluorinated graphene (F-graphene) with epoxy resin. The F-graphene/epoxy composite exhibited a high thermal conductivity of 0.3304 W·m-1·K-1 at a low filler loading of 1.0 wt.%, which was 67.63% higher than that of pure epoxy. The composite dielectric also showed high breakdown strength (78.60 kV/mm), high dielectric constant (8.23), low dielectric loss (<0.015) and low AC conductivity (<10-11 S·m-1). Moreover, the composite demonstrated high thermal stability and strong mechanical strength. It is believed that the F-graphene/epoxy composite has outstanding performance in various aspects and can enable the development and manufacturing of advanced electric power and electronic equipment devices.
RESUMO
Epoxy composites with high thermal conductivity, excellent dielectric, and mechanical properties are very promising for solving epoxy cracking faults in reactors and for extending their service life. In this work, we report on epoxy composites enhanced by ternary fillers of boron nitride nanosheets (BNNSs), multiwalled carbon nanotubes (MWCNTs), and silica (SiO2) nanoparticles. The obtained BNNSs/MWCNTs/SiO2/epoxy composites exhibit a high thermal conductivity of 0.9327 W m-1 K-1, which is more than 4-fold higher than that of pure epoxy. In addition, the resultant composites present an improved mechanical strength (from 2.7% of epoxy to 3.47% of composites), low dielectric constant (4.6), and low dielectric loss (0.02). It is believed that the integration of multifunctional properties into epoxy composites provides guidance for optimizing the design of high-performance materials.
RESUMO
Artificial synapses based on two-dimensional (2D) transition metal dichalcogenides (TMDs) materials have attracted wide attention to boost the development of neuromorphic computing in recent years. Various structures have been adopted to build 2D-material-based artificial synapses. In lateral- and vertical-structures, the realization of synaptic function mainly results from the migration of the defects and vacancies, which requires the strong ion diffusion ability. Here, we successfully demonstrate an artificial synapse based on lateral WSe2 homojunction. The migration of Se vacancies from the thin region to the thick region has been promoted by applying negative gate voltage, resulting in n-type doping in the thick region due to the accumulation of Se vacancies, which would diminish the barrier width of the metal-semiconductor junctions in the thick region. Consequently, the transformation from a high-resistance state (HRS) to a low-resistance state (LRS) is achieved. Significantly, our device can efficiently emulate the biological synaptic functions with a large synaptic weight change. Additionally, the transition from short-term memory (STM) to long-term memory (LTM) can be accomplished with a simpler structure, which would be beneficial to realizing the large-scale integration of transistor-based artificial synapses.
RESUMO
Long-lived interlayer excitons (IXs) in van der Waals heterostructures (HSs) stacked by monolayer transition metal dichalcogenides (TMDs) carry valley-polarized information and thus could find promising applications in valleytronic devices. Current manipulation approaches for valley polarization of IXs are mainly limited in electrical field/doping, magnetic field or twist-angle engineering. Here, we demonstrate an electrochemical-doping method, which is efficient, in-situ and nonvolatile. We find the emission characteristics of IXs in WS2/WSe2 HSs exhibit a large excitonic/valley-polarized hysteresis upon cyclic-voltage sweeping, which is ascribed to the chemical-doping of O2/H2O redox couple trapped between WSe2 and substrate. Taking advantage of the large hysteresis, a nonvolatile valley-addressable memory is successfully demonstrated. The valley-polarized information can be non-volatilely switched by electrical gating with retention time exceeding 60 min. These findings open up an avenue for nonvolatile valley-addressable memory and could stimulate more investigations on valleytronic devices.
RESUMO
Polymer-based dielectrics with high thermal conductivity and superb dielectric properties hold great promising for advanced electronic packaging and thermal management application. However, integrating these properties into a single material remains challenging due to their mutually exclusive physical connotations. Here, an ideal dielectric thermally conductive epoxy composite is successfully prepared by incorporating multiscale hybrid fillers of boron nitride microsphere (BNMS) and silicon dioxide coated silicon carbide nanoparticles (SiC@SiO2). In the resultant composites, the microscale BNMS serve as the principal building blocks to establish the thermally conductive network, while the nanoscale SiC@SiO2 as bridges to optimize the heat transfer and suppress the interfacial phonon scattering. In addition, the special core-shell nanoarchitecture of SiC@SiO2 can significantly impede the leakage current and generate a great deal of minicapacitors in the composites. Consequently, favorable thermal conductivity (0.76 W/mK) and dielectric constant (â¼8.19) are simultaneously achieved in the BNMS/SiC@SiO2/Epoxy composites without compromising the dielectric loss (â¼0.022). The strategy described in this study provides important insights into the design of high-performance dielectric composites by capitalizing on the merits of different particles.
RESUMO
Dielectric materials with excellent thermally conductive and mechanical properties can enable disruptive performance enhancement in the areas of advanced electronics and high-power devices. However, simultaneously achieving high thermal conductivity and mechanical strength for a single material remains a challenge. Herein, we report a new strategy for preparing mechanically strong and thermally conductive composite films by combining aramid nanofibers (ANFs) with graphene oxide (GO) and edge-hydroxylated boron nitride nanosheet (BNNS-OH) via a vacuum-assisted filtration and hot-pressing technique. The obtained ANF/GO/BNNS film exhibits an ultrahigh in-plane thermal conductivity of 33.4 Wm-1 K-1 at the loading of 10 wt.% GO and 50 wt.% BNNS-OH, which is 2080% higher than that of pure ANF film. The exceptional thermal conductivity results from the biomimetic nacreous "brick-and-mortar" layered structure of the composite film, in which favorable contacting and overlapping between the BNNS-OH and GO is generated, resulting in tightly packed thermal conduction networks. In addition, an outstanding tensile strength of 93.3 MPa is achieved for the composite film, owing to the special biomimetic nacreous structure as well as the strong π-π interactions and extensive hydrogen bonding between the GO and ANFs framework. Meanwhile, the obtained composite film displays excellent thermostability (Td = 555 °C, Tg > 400 °C) and electrical insulation (4.2 × 1014 Ω·cm). We believe that these findings shed some light on the design and fabrication of multifunctional materials for thermal management applications.
RESUMO
Dielectric materials with high thermal conductivity and outstanding dielectric properties are highly desirable for advanced electronics. However, simultaneous integration of those superior properties for a material remains a daunting challenge. Here, a multifunctional epoxy composite is fulfilled by incorporation of boron nitride nanosheets (BNNSs) and mesoporous silica coated multi-walled carbon nanotubes (MWCNTs@mSiO2). Owing to the effective establishment of continuous thermal conductive network, the obtained BNNSs/MWCNTs@mSiO2/epoxy composite exhibits a high thermal conductivity of 0.68 W m-1 K-1, which is 187% higher than that of epoxy matrix. In addition, the introducing of mesoporous silica dielectric layer can screen charge movement to shut off leakage current between MWCNTs, which imparts BNNSs/MWCNTs@mSiO2/epoxy composite with high dielectric constant (8.10) and low dielectric loss (<0.01) simultaneously. It is believed that the BNNSs/MWCNTs@mSiO2/epoxy composites with admirable features have potential applications in modern electronics.
RESUMO
The development of highly thermally conductive composites with excellent electrical insulation has attracted extensive attention, which is of great significance to solve the increasingly severe heat concentration issue of electronic equipment. Herein, we report a new strategy to prepare boron nitride nanosheets (BNNSs) via an ion-assisted liquid-phase exfoliation method. Then, silver nanoparticle (AgNP) modified BNNS (BNNS@Ag) was obtained by in situ reduction properties. The exfoliation yield of BNNS was approximately 50% via the ion-assisted liquid-phase exfoliation method. Subsequently, aramid nanofiber (ANF)/BNNS@Ag composites were prepared by vacuum filtration. Owing to the "brick-and-mortar" structure formed inside the composite and the adhesion of AgNP, the interfacial thermal resistance was effectively reduced. Therefore, the in-plane thermal conductivity of ANF/BNNS@Ag composites was as high as 11.51 W m-1 K-1, which was 233.27% higher than that of pure ANF (3.45 W m-1 K-1). The addition of BNNS@Ag maintained tensile properties (tensile strength of 129.14 MPa). Moreover, the ANF/BNNS@Ag films also had good dielectric properties and the dielectric constant was below 2.5 (103 Hz). Hence, the ANF/BNNS@Ag composite shows excellent thermal management performance, and the electrical insulation and mechanical properties of the matrix are retained, indicating its potential application prospects in high pressure and high temperature application environments.
RESUMO
Materials with excellent thermal stability, mechanical, and insulating properties are highly desirable for electrical equipment with high voltage and high power. However, simultaneously integrating these performance portfolios into a single material remains a great challenge. Here, we describe a new strategy to prepare composite film by combining one-dimensional (1D) rigid aramid nanofiber (ANF) with 2D alumina (Al2O3) nanoplates using the carboxylated chitosan acting as hydrogen bonding donors as well as soft interlocking agent. A biomimetic nacreous 'brick-and-mortar' structure with a 3D hydrogen bonding network is constructed in the obtained ANF/chitosan/Al2O3 composite films, which provides the composite films with exceptional mechanical and dielectric properties. The ANF/chitosan/Al2O3 composite film exhibits an ultrahigh electric breakdown strength of 320.1 kV/mm at 15 wt % Al2O3 loading, which is 50.6% higher than that of the neat ANF film. Meanwhile, a large elongation at break of 17.22% is achieved for the composite film, integrated with high tensile strength (~233 MPa), low dielectric loss (<0.02), and remarkable thermal stability. These findings shed new light on the fabrication of multifunctional insulating materials and broaden their practical applications in the field of advanced electrics and electrical devices.
RESUMO
The diversification of data types and the explosive increase of data size in the information era continuously required to miniaturize the memory devices with high data storage capability. Atomically thin two-dimensional (2D) transition metal dichalcogenides (TMDs) are promising candidates for flexible and transparent electronic and optoelectronic devices with high integration density. Multistate memory devices based on TMDs could possess high data storage capability with a large integration density and thus exhibit great potential applications in the field of data storage. Here, we report the multistate data storage based on multilayer tungsten diselenide (WSe2) transistors by interface engineering. The multiple resistance states of the WSe2 transistors are achieved by applying different gate voltage pulses, and the switching ratio of the memory can be as large as 105 with high cycling endurance. The water and oxygen molecules (H2O/O2) trapped at the interface between the SiO2 substrate and WSe2 introduce the trap states and thus the large hysteresis of the transfer curves, which leads to the multistate data storage. In addition, the laminated Au thin film electrodes make the contact interface between the electrodes and WSe2 free of dangling bond and Fermi level pinning, thus giving rise to the excellent performance of memory devices. Importantly, the interface trap states can be easily controlled by a simple oxygen plasma treatment of the SiO2 substrate, and subsequently, the performance of the multistate memory devices can be manipulated. Our findings provide a simple and efficient strategy to engineer the interface states for the multistate data storage applications and would motivate more investigations on the trap state-associated applications.
RESUMO
Strain engineering provides an efficient strategy to modulate the fundamental properties of semiconducting structures for use in functional electronic and optoelectronic devices. Here, we report on how the strain affects the bandgap, optical anisotropy and stability of two-dimensional (2D) perovskite (BA)2(MA)n-1PbnI3n+1 (n = 1-3) microplates, using photoluminescence spectroscopy. Upon applying external strain, the bandgap decreases at a rate of -5.60/-2.74/-1.38 meV per % for n = 1, 2, and 3 2D perovskites, respectively. This change of the bandgap can be ascribed to the distortion of the octahedra (Pb-I bond contraction) in 2D perovskites, supported by a study on emission anisotropy, which increases with the increase of strain. In addition, the external strain can significantly deteriorate the stability of 2D perovskites due to the strain induced distortion which would make the penetration of moisture and oxygen into the perovskite microplates easier, resulting in much faster degradation rates. Our findings not only provide insights into the design and optimization of functional devices, but also provide a new approach to improve the stability of 2D perovskite based devices.