Automated intelligent design of modified uni-traveling carrier photodectors.

This paper introduces an automatic intelligent design method for the modified uni-traveling carrier photodetector (MUTC-PD). The conventional photodetector design process often relies on the numerical solution of complex nonlinear partial differential equations to simulate and optimize device performance, which is not only computationally intensive but also inefficient. To overcome this challenge, we apply the charge control principle to calculate the photodetector bandwidth, which improves the computational speed by a factor of approximately 1800 compared to the numerical solution of nonlinear partial differential equations. To further optimize the structure of the photodetector, we incorporate the Velocity Varying Climbing Particle Swarm Optimization (VVCPSO) algorithm. This is an improved algorithm based on the traditional particle swarm algorithm, which is able to quickly find the optimal solution in a complex parameter space. By applying the VVCPSO algorithm, we successfully fine-tuned the photodetector structure and obtained structural parameters with optimal performance. Our thorough verification process confirms that the proposed method is consistent with the results of ATLAS simulation software. Automated design has resulted in a high-performance MUTC-PD with a responsivity of 0.52A/W and a bandwidth of 60 GHz (@-3 V) at a mesa diameter of 16µm. Compared to the pre-optimized device, the bandwidth is increased to three times the original. By reducing the mesa diameter to 4µm, the bandwidth can be further increased to 82 GHz (@-3 V). The proposed method's calculation speed is fast enough, enabling extensive parameter studies to optimize device performance.

Dissolved organic matter accelerates microbial degradation of 17 alpha-ethinylestradiol in the presence of iron mineral.

Dissolved organic matter (DOM) and iron minerals widely existing in the natural aquatic environment can mediate the migration and transformation of organic pollutants. However, the mechanism of interaction between DOM and iron minerals in the microbial degradation of pollutants deserves further investigation. In this study, the mechanism of 17 alpha-ethinylestradiol (EE2) biodegradation mediated by humic acid (HA) and three kinds of iron minerals (goethite, magnetite, and pyrite) was investigated. The results found that HA and iron minerals significantly accelerated the biodegradation process of EE2, and the highest degradation efficiency of EE2 (48%) was observed in the HA-mediated microbial system with pyrite under aerobic conditions. Furthermore, it had been demonstrated that hydroxyl radicals (HO•) was the main active substance responsible for the microbial degradation of EE2. HO• is primarily generated through the reaction between hydrogen peroxide secreted by microorganisms and Fe(II), with aerobic conditions being more conducive. The presence of iron minerals and HA could change the microbial communities in the EE2 biodegradation system. These findings provide new information for exploring the migration and transformation of pollutants by microorganisms in iron-rich environments.

Inverse-designed polarization multiplexing non-uniformly distributed gratings for one-dimensional beam steering.

Non-uniformly distributed gratings on the silicon-on-insulator platform for one-dimensional beam steering are designed by direct binary search inverse-design method. The gratings exhibit good emission directionality and far-field characteristics. Within a relatively small wavelength tuning range of 1517-1577 nm, the longitudinal scanning angle for TE and TM light is 23.65° and 10.81°, respectively, both of which are much larger than their uniform counterparts. By polarization multiplexing and etching depth optimization, a remarkable longitudinal scanning angle of 32.10° and high beam steering efficiency of 0.55°/nm are obtained. This work may pave the way for the development of miniaturized optical phased arrays with excellent beam steering performance.

Topological photonic crystal nanowire array laser with edge states.

A topological photonic crystal InGaAsP/InP core-shell nanowire array laser operating in the 1550 nm wavelength band is proposed and simulated. The structure is composed of an inner topological nontrivial photonic crystal and outer topological trivial photonic crystal. For a nanowire with height of 8 µm, high quality factor of 4.7 × 104 and side-mode suppression ratio of 11 dB are obtained, approximately 32.9 and 5.5 times that of the uniform photonic crystal nanowire array, respectively. Under optical pumping, the topological nanowire array laser exhibits a threshold 27.3% lower than that of the uniform nanowire array laser, due to the smaller nanowire slit width and stronger optical confinement. Moreover, the topological NW laser exhibits high tolerence to manufacturing errors. This work may pave the way for the development of low-threshold single-mode high-robustness nanolasers.

Improved performance of InGaAs/AlGaAs quantum well lasers on silicon using InAlAs trapping layers.

InGaAs/AlGaAs multiple quantum well lasers grown on silicon (001) by molecular beam epitaxy have been demonstrated. By inserting InAlAs trapping layers into AlGaAs cladding layers, misfit dislocations easily located in the active region can be effectively transferred out of the active region. For comparison, the same laser structure without the InAlAs trapping layers was also grown. All these as-grown materials were fabricated into Fabry-Perot lasers with the same cavity size of 20 × 1000 µm2. The laser with trapping layers achieved a 2.7-fold reduction in threshold current density under pulsed operation (5 µs-pulsed width, 1%-duty cycle) compared to the counterpart, and further realized a room-temperature continuous-wave lasing with a threshold current of 537 mA which corresponds to a threshold current density of 2.7 kA/cm2. When the injection current reached 1000 mA, the single-facet maximum output power and slope efficiency were 45.3 mW and 0.143 W/A, respectively. This work demonstrates significantly improved performances of InGaAs/AlGaAs quantum well lasers monolithically grown on silicon, providing a feasible solution to optimize the InGaAs quantum well structure.

InAs/GaAs quantum-dot lasers grown on on-axis Si (001) without dislocation filter layers.

InAs/GaAs quantum dot (QD) laser monolithically grown on silicon is one of the potential approaches to realizing silicon-based light sources. However, the mismatch between GaAs and Si generates a high density of threading dislocations (TDs) and antiphase boundaries (APBs), which trap carriers and adversely affect device performance. In this paper, we present a simple method to reduce the threading dislocation density (TDD) merely through GaAs buffer, eliminating the intricate dislocation filter layers (DFLs) as well as any intermediate buffer layers whose compositions are different from the target GaAs. An APB-free epitaxial 2.5 µm GaAs film was grown on exact Si (001) by metalorganic chemical vapor deposition (MOCVD) with a TDD of 9.4 × 106 cm-2. InAs/GaAs QDs with a density of 5.2 × 1010 cm-2 were grown on this GaAs/Si (001) virtual substrate by molecular beam epitaxy (MBE) system. The fabricated QD laser has achieved a single facet room temperature continuous-wave output power of 138 mW with a threshold current density of 397 A/cm2 and a lasing wavelength of 1306 nm. In this work, we propose a simplified method to fabricate high-power QD lasers, which is expected to promote the application of photonic integrated circuits.

Simulation and design of a high-speed and high-power modified uni-traveling carrier photodiode based on the electric field distribution in the depletion region.

A modified uni-traveling carrier photodiode with an electric field control layer is proposed to achieve high-speed and high-power performance at a lower bias voltage. By inserting the 10 nm p-type InGaAs electric field control layer between the intrinsic absorption layer and space layer, the electric field distribution in the depleted absorption layer and depleted non-absorption layer can be changed. It is beneficial for reducing power consumption and heat generation, meanwhile suppressing the space-charge effect. Compared with the original structure without the electric field control layer, the 3 dB bandwidth of the 20 µm diameter novel structure, to the best of our knowledge, is improved by 27.1% to 37.5 GHz with a reverse bias of 2 V, and the RF output power reaches 23.9 dBm at 30 GHz. In addition, under 8 V bias voltage, the bandwidth reaches 47.3 GHz.

The complementary contribution of each order topology into the synchronization of multi-order networks.

Higher-order interactions improve our capability to model real-world complex systems ranging from physics and neuroscience to economics and social sciences. There is great interest nowadays in understanding the contribution of higher-order terms to the collective behavior of the network. In this work, we investigate the stability of complete synchronization of complex networks with higher-order structures. We demonstrate that the synchronization level of a network composed of nodes interacting simultaneously via multiple orders is maintained regardless of the intensity of coupling strength across different orders. We articulate that lower-order and higher-order topologies work together complementarily to provide the optimal stable configuration, challenging previous conclusions that higher-order interactions promote the stability of synchronization. Furthermore, we find that simply adding higher-order interactions based on existing connections, as in simple complexes, does not have a significant impact on synchronization. The universal applicability of our work lies in the comprehensive analysis of different network topologies, including hypergraphs and simplicial complexes, and the utilization of appropriate rescaling to assess the impact of higher-order interactions on synchronization stability.

Sunlight-induced degradation of COVID-19 antivirals arbidol in natural aquatic environments: Mechanisms, pathways and toxicity.

Insights into COVID-19 antivirals' environmental fate and ecological risk are urgently required due to their increasing concentrations in aquatic environments, which have rarely been studied. Herein, we first investigated the photochemical transformation and the resulting alterations in toxicity of arbidol, an antiviral drug with relatively higher toxicity. The photolysis of arbidol was rapid with a rate constant of 0.106 min-1 due to its superior ultraviolet light absorption, in which the direct photolysis was predominated with a contribution of 91.5%. Despite its substantial photolysis, only 14.45% of arbidol was mineralized after 100 min, implying that arbidol and its products might have a long-term impact on aquatic environment. It was inferred that arbidol was photolyzed mainly via the loss of thiophenol, bromine, and alkylamine, based on twelve photolytic products identified. Notably, the experimental results demonstrated that the photolysis process increased the acute toxicity of arbidol, and the toxicity prediction indicated that the ecotoxicity of two photolytic products was very high with LC50 values below 0.1 mg/L. Due to the co-effect of multiple constituents, the photolytic rate observed in wastewater treatment plant effluent and in river water was comparable to that in ultra-pure water, while it was slightly enhanced in lake water. The presence of dissolved organic matter suppressed arbidol photolysis, while NO3- exhibited a promotion effect. These results would be of great significance to assess the fate and risk of COVID-19 antivirals in natural aquatic environments.

[Analysis and Research on Comprehensive Evaluation Method of Operation Performance of Hospital Valuable Equipment].

OBJECTIVE: To study the effective method of comprehensive evaluation and analysis of hospital valuable medical equipment performance. METHODS: The operation performance of 6 valuable equipment was evaluated by cost-benefit method, comprehensive index method and public evaluation method. RESULTS: Utilize equipment information management methods for data collection and evaluation, and construct an assessment data model based on evaluation indicators from three aspects: equipment operation status, profitability status, and scientific research contribution. CONCLUSIONS: Through the performance analysis of different types of valuable medical equipment, a more real and comprehensive quantitative analysis is carried out, which plays a key role in the reasonable purchase, efficient operation and avoiding idling.

Analysis of controlling genes for tiller growth of Psathyrostachys juncea based on transcriptome sequencing technology.

BACKGROUND: Tillering is a complicated process in plant and is a significant trait that affects biomass and seed yield of bunch grass Psathyrostachys juncea, a typical perennial forage species. To clarify the regulatory mechanisms of tillering in P. juncea and to explore related candidate genes could be helpful to improve the seed and forage yield of perennial gramineous forages. We selected the tiller node tissues of P. juncea for transcriptome sequencing to determine the differentially expressed genes (DEG) between dense and sparse tillering genotypes. The metabolic pathway was studied, candidate genes were screened, and reference genes stability were evaluated. RESULTS: The results showed that approximately 5466 DEGs were identified between the two genotypes with dense and sparse tillers of P. juncea, which significantly differed in tiller number. Tillering regulation pathways analysis suggested that DEGs closely related to the biosynthesis of three plant hormones, namely auxin (IAA), cytokinin (CTK), and strigolactones (SLs), while "biosynthesis of lignin" and "nitrogen metabolism" have remarkable differences between the dense and sparse tillering genotypes. Meanwhile, the reference gene Actin1, having the best stability, was screened from twelve genes with highest expression level and was used in verification of ten tillering related candidate genes. CONCLUSIONS: The tillering mechanism of perennial grass P. juncea was expounded by transcriptome analysis of tiller node tissues. We demonstrated that dense-tillering genotypes may be distinguished by their low expression patterns of genes involved in SL, IAA, and high expression patterns of genes involved in CTK biosynthesis at the tillering stage, and nitrogen metabolism and lignin biosynthesis can also affect the number of tillers. Furthermore, the expression level of ten tillering related candidate genes were verified using Actin1 as reference gene. These candidate genes provide valuable breeding resources for marker assisted selection and yield traits improvement of P. juncea.

Sub-10†nm radial resolution achieved by cascading a graded structure outside a spherical hyperlens.

Due to the excellent ability to break the diffraction limit in the subwavelength range, metamaterial-based hyperlens has received extensive attention. Unfortunately, radial resolution of most current hyperlens is not high enough, which is a huge obstacle to the application in 3D super-resolution imaging. In this paper, we propose a theoretical solution to this issue by cascading a graded structure outside the conventional Ag-TiO2 spherical hyperlens. The product of the thickness and the refractive index (RI) of the dielectric layer in the graded structure is fixed to 19.8 while RI increases linearly from 1.38 to 3.54 along the radial direction. By reducing the asymptote slope of the dispersion curve, the coupling of the wave vectors to the hyperlens is enhanced and thus radial resolution is significantly improved to 5 nm while ensuring that the focus is still detectable in the far-field. This design paves the way to high-performance hyperlens for 3D imaging and biosensing in the future.

High slope-efficiency quantum-dot lasers grown on planar exact silicon (001) with asymmetric waveguide structures.

We report electrically pumped continuous-wave (CW) InAs/GaAs quantum dot lasers directly grown on planar exact silicon (001) with asymmetric waveguide structures. Surface hydrogen-annealing for the GaAs/ Si (001) templates and low-temperature growth for GaInP upper cladding layers were combined in the growth of the laser structure to achieve a high slope efficiency. For the broad-stripe edge-emitting lasers with 2-mm cavity length and 20-µm stripe width made from the above laser structure, a threshold current density of 203.5 A/cm2 and a single-facet slope efficiency of 0.158 W/A are achieved at ∼1.31 µm band under CW conditions. The extrapolated mean-time-to-failure reaches up to 21000 hours at room temperature, which is deduced from the data measured from C-mount packaged devices. Importantly, these results can provide a practical strategy to realize 1.3 µm wavelength band distributed feedback lasers directly on planar exact Si (001) templates with thin buffer layers.

Inverse design of sub-wavelength convergent grating based on the "stepped particle swarm algorithm".

In this Letter, a novel "stepped particle swarm optimization" (SPSO) based on field intensity adjustment is proposed. After that, we used this algorithm to design a sub-wavelength converging grating that could be integrated with the detector on the back. Firstly, the advantages of reverse design in the process of two-dimensional or multi-element grating pattern design were summarized by comparing the theory of forward and reverse design. Then, the common "particle swarm optimization" (PSO) and our proposal were compared in the reverse design process; we found that the field strength at the focal point obtained by the improved algorithm was approximately twice of the conventional PSO, and the SPSO had higher computational efficiency and better global convergence. The value of the SPSO had been steadily enlarged, which significantly improved the performance of the sub-wavelength convergent grating. Finally, the property of the sub-wavelength converging grating was simulated, and we found that the grating could achieve good convergence in the focal length range of 100-150 µm, and had a strong ability to compensate for the position deviation of the incident light. In actual optical communications, this sub-wavelength converging grating will play an important role in alleviating the bandwidth and quantum efficiency, improving the performance of the detectors.

Topological inverse design of fabrication-constrained nanophotonic devices via an adaptive projection method.

Topology optimization has been widely adopted in the inverse design of nanophotonic devices due to low computation cost, which unfortunately produces intermediate relative permittivity values that fail to meet fabrication constraints. Additionally, the postprocessing required inevitably increases the complexity of the inverse design. In this Letter, we propose an adaptive projection method for topology optimization, in which a two-level hierarchical hyperbolic tangent projection function with linear increment and differentiation is constructed and applied to eliminate inherent defects of conventional topology optimization. Two binarized nanophotonic devices have been designed by our adaptive projection method, among which one ultra-compact dual 90°-bend waveguide reduces the average insertion loss to 20.3% of its similar counterpart and shows an 8.1% reduction for the average crosstalk in the O band, the other ultralow-loss waveguide crossing features an average insertion loss as low as 0.09 dB. With the significant advantages of excellent performance guarantee and fabrication-friendly geometry control fully demonstrated, our inverse design solution shows potential to contribute to nanophotonic devices and integrated chips.

Assessment of Thyroid Endocrine Disruption Effects of Parabens Using In Vivo, In Vitro, and In Silico Approaches.

The extensive applications of parabens in foods, drugs, and cosmetics cause inevitable exposure to humans. Revealing the developmental toxicity of parabens is of utmost importance regarding their safety evaluation. In this study, the effects of four commonly used parabens, including methyl paraben (20 ∼ 200 µM), ethyl paraben (20 ∼ 100 µM), propyl paraben (5 ∼ 20 µM), and butyl paraben (BuP, 2 ∼ 10 µM), were investigated on the early development of zebrafish embryos and larvae. The underlying mechanisms were explored from the aspect of their disturbance in the thyroid endocrine system using in vivo, in vitro, and in silico assays. Paraben exposure caused deleterious effects on the early development of zebrafish, with BuP displaying the highest toxicity among all, resulting in the exposure concentration-related mortality, decreased hatching rate, reduced body length, lowered heart rate, and the incidence of malformation. Further investigation showed that paraben exposure reduced thyroid hormone levels and disturbed the transcriptional expressions of the target genes in the hypothalamic-pituitary-thyroid axis. Molecular docking analysis combined with in vitro GH3 cell proliferation assay testified that all test parabens exhibited thyroid receptor agonistic activities. The findings confirmed the developmental toxicity of the test parabens and their thyroid endocrine disruption effects, providing substantial evidence on the safety control of paraben-based preservatives.

Benzotriazole Ultraviolet Stabilizers Promote Breast Cancer Cell Proliferation via Activating Estrogen-Related Receptors α and γ at Human-Relevant Levels.

Benzotriazole ultraviolet stabilizers (BUVSs) are ubiquitous emerging pollutants that have been reported to show estrogenic disruption effects through interaction with the classic estrogen receptors (ERs) in the fashion of low activity. The present study aims at revealing the potential disruption mechanism via estrogen-related receptors α and γ (ERRα and ERRγ) pathways. By the competitive binding assay, we first found that BUVSs bond to ERRγ ligand binding domain (ERRγ-LBD) with Kd ranging from 0.66 to 19.27 µM. According to the results of reporter gene assays, the transcriptional activities of ERRα and ERRγ were promoted by most tested BUVSs with the lowest observed effective concentrations (LOEC) from 10 to 100 nM, which are in the range of human exposure levels. At 1 µM, most tested BUVSs showed higher agonistic activity toward ERRγ than ERRα. The most effective two BUVSs promoted the MCF-7 proliferation dependent on ERRα and ERRγ with a LOEC of 100 nM. The molecular dynamics simulation showed that most studied BUVSs had lower binding free energy with ERRγ than with ERRα. The structure-activity relationship analysis revealed that molecular polarizability, electron-donating ability, ionization potential, and softness were the main structural factors impacting the binding of BUVSs with ERRγ. Overall, our results provide novel insights into the estrogenic disruption effects of BUVSs.

Exposure to perfluorooctane sulfonate reduced cell viability and insulin release capacity of ß cells.

Per- and polyfluoroalkyl substances (PFAS) are found to have multiple adverse outcomes on human health. Recently, epidemiological and toxicological studies showed that exposure to PFAS had adverse impacts on pancreas and showed association with insulin abnormalities. To explore how PFAS may contribute to diabetes, we studied impacts of perfluorooctane sulfonate (PFOS) on cell viability and insulin release capacity of pancreatic ß cells by using in vivo and in vitro methods. We found that 28-day administration with PFOS (10 mg/(kg body weight•day)) caused reductions of pancreas weight and islet size in male mice. PFOS administration also led to lower serum insulin level both in fasting state and after glucose infusion among male mice. For cell-based in vitro bioassay, we used mouse ß-TC-6 cancer cells and found 48-hr exposure to PFOS decreased the cell viability at 50 µmol/L. By measuring insulin content in supernatant, 48-hr pretreatment of PFOS (100 µmol/L) decreased the insulin release capacity of ß-TC-6 cells after glucose stimulation. Although these concentrations were higher than the environmental concentration of PFOS, it might be reasonable for high concentration of PFOS to exert observable toxic effects in mice considering mice had a faster removal efficiency of PFOS than human. PFOS exposure (50 µmol/L) to ß-TC-6 cells induced intracellular accumulation of reactive oxidative specie (ROS). Excessive ROS induced the reactive toxicity of cells, which eventually invoke apoptosis and necrosis. Results in this study provide evidence for the possible causal link of exposure to PFOS and diabetes risk.

[Research on the Construction of Hospital Equipment Management Information Platform].

With the deepening of China's medical reform, the scale of hospital equipment assets at all levels is also expanding. In the face of large-scale and various equipment assets, the traditional single machine statistical management method not only has a single interface, poor data accuracy and is not compatible with other systems, but also is difficult to achieve "full life cycle" management. In order to solve above problems, the Ninth People's Hospital Affiliated to Shanghai Jiao Tong University of Medicine aims to use the Internet of Things to build a medical equipment management information platform, realize the whole hospital area, whole subject and whole process management of medical materials, and achieve the objectives of business linkage, information connectivity and data sharing between management departments and clinical departments.

Monolithic integration of laser onto multilayer silicon nitride photonic integrated circuits with high efficiency at telecom wavelength.

We propose a multilayer silicon nitride (SiN) -on-silicon photonic integrated circuit (PIC) platform with a monolithic laser at the C-band. A tapered edge coupler and a meta-structure-based interlayer directional coupler in the platform were designed to realize low-loss broadband laser-to-chip 3D coupling with small footprint. The coupling length of the interlayer directional coupler and the gap between different SiN layers were optimized as 12.7 µm and 1.4 µm. We measured the 1-dB-drop optical operation bandwidth of greater than 76 nm and the coupling loss of 6.1 ± 0.1 dB at 1550 nm for the interlayer directional coupler. The hybrid integration was demonstrated as a proof of concept for monolithic integration of light sources. The butt-coupling loss of 3.7 ± 0.1 dB between an on-chip DFB laser and a SiN edge coupler at 1549.48 nm was achieved. This approach opens the possibility of employing monolithic laser in the silicon photonics platform.