Problem-based learning in pharmaceutical education: a systematic review and meta-analysis.

OBJECTIVE: To assess the effects of problem-based learning (PBL) on the learning achievements of pharmacy students. METHODS: We searched for controlled studies that compared PBL to traditional learning in pharmacy courses (graduate and undergraduate) in the major literature databases up to January 2014. Two independent researchers selected the studies, extracted the data, and assessed the quality of the studies. Meta-analyses of the outcomes were performed using a random effects model. RESULTS: From 1,988 retrieved records, five were included in present review. The studies assessed students' impressions about the PBL method and compared student grades on the midterm and final examinations. PBL students performed better on midterm examinations (odds ratio [OR] = 1.46; confidence interval [IC] 95%: 1.16, 1.89) and final examinations (OR = 1.60; IC 95%: 1.06, 2.43) compared with students in the traditional learning groups. No difference was found between the groups in the subjective evaluations. CONCLUSION: pharmacy students' knowledge was improved by the PBL method. Pharmaceutical education courses should consider implementing PBL.

A Study on a Cast Steel Reinforced with WC-Metal Matrix Composite.

This study seeks to investigate the local reinforcement of low carbon cast steel specimens with WC-metal matrix composites (WC-MMCs), to obtain a new material effective in competing with hard alloy steels. For this purpose, a powder compact of tungsten carbide (WC) and iron (Fe) was prepared and placed in the mold cavity before casting. The reactions that occurred with the molten steel led to the formation of the WC-MMC and, consequently, to the local reinforcement of the steel. The microstructure of the WC-MMC reinforcement was characterized by scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and electron backscatter diffraction (EBSD). The results showed a microstructural variation throughout the depth of the reinforcement. In the surface region, most of the original WC particles retain their polygonal morphology, but towards the base metal, the dissolution of the WC particles increased with the formation of (Fe,W)6C carbides. Closer to the base metal, dendritic eutectic carbides of (Fe,W)6C and fine (Fe,W)23C6 precipitates in a matrix of martensite were formed. The mechanical properties of the reinforcement were evaluated by hardness and ball-cratering abrasion tests. The results revealed a significant increase in hardness, being three times harder than the base metal, and a decrease of 39% in the wear rate.

Production of TiC-MMCs Reinforcements in Cast Ferrous Alloys Using In Situ Methods.

This literature review aims to summarize the research conducted on the production of locally reinforced ferrous castings based on metal matrix composites reinforced with TiC (TiC-MMCs). One way to improve the wear resistance of cast components is to reinforce critical regions locally with metal matrix composites (MMCs) without changing the toughness of the component core. The in situ method of self-propagating high-temperature synthesis is one of the main approaches for the production of this enhanced material. Using this approach, the reinforcement is formed from a powder compact inserted in the mold cavity. The temperature of the liquid metal then produces the combustion reactions of the powders, which promote the formation of the ceramic phase. This paper focuses on eight powder systems used to synthesize TiC: Ti-C, Ni-Ti-C, Ni-Ti-B4C, Fe-Ti-C/Fe-Cr-Ti-C, Cu-Ti-B4C, Al-Ti-C, and Al-Ti-B4C, and provides an overview of the methodologies used as well as the effect of processing variables on the microstructural and mechanical characteristics of the reinforcement zones.

Production and Characterization of Austenitic Stainless Steel Cast Parts Reinforced with WC Particles Fabricated by Ex Situ Technique.

In this work, austenitic stainless steel specimens were locally reinforced with WC particles. The reinforcements were fabricated via an ex situ technique based on powder technology. Mixtures of WC, Fe, and M0101 binder were cold-pressed to obtain powder compacts. After debinding and sintering, the porous WC-Fe inserts were fixed in a mold cavity, where they reacted with liquid metal. Microstructural analysis was conducted for characterization of the phases constituting the produced reinforcement zone and the bonding interface. The results revealed that the reinforcement is a graded material with compositional and microstructural gradients throughout its thickness. The zone nearest to the surface has a ferrous matrix with homogeneously distributed WC particles and (Fe,W,Cr)6C and (Fe,W,Cr)3C carbides, formed from the liquid metal reaction with the insert. This precipitation leads to austenite destabilization, which transforms into martensite during cooling. A vast dissolution of the WC particles occurred in the inner zones, resulting in more intense carbides formation. Cr-rich carbides ((Fe,Cr,W)7C3, and (Fe,Cr,W)23C6) formed in the interdendritic regions of austenite; this zone is characterized by coarse dendrites of austenite and a multi-phase interdendritic network composed of carbides. An interface free of discontinuities and porosities indicates good bonding of the reinforcement zone to stainless steel.

Microstructural Characterization of TiC-White Cast-Iron Composites Fabricated by In Situ Technique.

High-chromium white cast-iron specimens locally reinforced with TiC-metal matrix composites were successfully produced via an in situ technique based on combustion synthesis. Powder mixtures of Ti, Al, and graphite were prepared and compressed to fabricate green powder compacts that were inserted into the mold cavity before the casting. The heat of the molten iron causes the ignition of the combustion reaction of the reactant powders, resulting in the formation of the TiC by self-propagating high-temperature synthesis. The microstructure of the resultant composites and the bonding interfaces was characterized by scanning electron microscopy and energy dispersive spectroscopy (SEM/EDS), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The microstructural results showed a good adhesion of the composite, suggesting an effective infiltration of the metal into the inserted compact, yet a non-homogeneous distribution of the TiC in the martensite matrix was observed. Based on the results, the in situ synthesis appears to be a great potential technique for industrial applications.

Preparation and Microstructural Characterization of a High-Cr White Cast Iron Reinforced with WC Particles.

High-chromium white cast iron (WCI) specimens locally reinforced with WC-metal matrix composites were produced via an ex situ technique: powder mixtures of WC and Fe cold-pressed in a pre-form were inserted in the mold cavity before pouring the base metal. The microstructure of the resulting reinforcement is a matrix of martensite (α') and austenite (γ) with WC particles evenly distributed and (Fe,W,Cr)6C carbides that are formed from the reaction between the molten metal and the inserted pre-form. The (Fe,W,Cr)6C precipitation leads to the hypoeutectic solidification of the matrix and the final microstructure consists of martensite, formed from primary austenite during cooling and eutectic constituent with (Fe,Cr)7C3 and (Fe,W,Cr)6C carbides. The presence of a reaction zone with 200 µm of thickness, between the base metal and the composite should guarantee a strong bonding between these two zones.