RESUMO
Field emission of electrons from individually mounted carbon nanotubes has been found to be dramatically enhanced when the nanotube tips are opened by laser evaporation or oxidative etching. Emission currents of 0.1 to 1 microampere were readily obtained at room temperature with bias voltages of less than 80 volts. The emitting structures are concluded to be linear chains of carbon atoms, Cn, (n = 10 to 100), pulled out from the open edges of the graphene wall layers of the nanotube by the force of the electric field, in a process that resembles unraveling the sleeve of a sweater.
RESUMO
Carbon nanotubes produced in arcs have been found to have the form of multiwalled fullerenes, at least over short lengths. Sintering of the tubes to each other is the predominant source of defects that limit the utility of these otherwise perfect fullerene structures. The use of a water-cooled copper cathode minimized such defects, permitting nanotubes longer than 40 micrometers to be attached to macroscopic electrodes and extracted from the bulk deposit. A detailed mechanism that features the high electric field at (and field-emission from) open nanotube tips exposed to the arc plasma, and consequent positive feedback effects from the neutral gas and plasma, is proposed for tube growth in such arcs.
RESUMO
We investigate the electronic transport properties across the pentacene/graphene interface. Current transport across the pentacene/graphene interface is found to be strikingly different from transport across pentacene/HOPG and pentacene/Cu interfaces. At low voltages, diodes using graphene as a bottom electrode display PooleFrenkel emission, while diodes with HOPG and Cu electrodes are dominated by thermionic emission. At high voltages conduction is dominated by PooleFrenkel emission for all three junctions. We propose that current across these interfaces can be accurately modeled by a combination of thermionic and PooleFrenkel emission. Results presented not only suggest that graphene provides low resistive contacts to pentacene where a flat-laying orientation of pentacene and transparent metal electrodes are desired but also provides further understanding of the physics at the organic semiconductor/graphene interface.
RESUMO
Intrinsic nonuniformity in the polycrystalline-silicon backplane transistors of active matrix organic light-emitting diode displays severely limits display size. Organic semiconductors might provide an alternative, but their mobility remains too low to be useful in the conventional thin-film transistor design. Here we demonstrate an organic channel light-emitting transistor operating at low voltage, with low power dissipation, and high aperture ratio, in the three primary colors. The high level of performance is enabled by a single-wall carbon nanotube network source electrode that permits integration of the drive transistor and the light emitter into an efficient single stacked device. The performance demonstrated is comparable to that of polycrystalline-silicon backplane transistor-driven display pixels.