Objective Vision-related Indications for Clear and Tinted Football Helmet Visors.

SIGNIFICANCE: Football helmet visors are popular among players and may increase safety. However, they may also be costly or impractical, or impair the evaluation of head and neck injury. Determining an objective list of vision-related clinical conditions may help meet risk-benefit ratios while increasing access to care to athletes with special needs. PURPOSE: The purpose of this study was to determine an objective list of vision-related conditions that may benefit from clear and tinted football helmet visor use in athletes. METHODS: After comprehensive dilated eye examinations on 58 Division I collegiate football players at the University of Alabama at Birmingham between February 2017 and June 2018, an expert panel in vision care, sports medicine, and football equipment convened to determine vision-related conditions most important for clear or tinted football helmet visor use. RESULTS: In August 2018, the list drafted by the expert vision and sports medical panel in which a clear football helmet visor might be justified included conditions associated with retinal detachment and unilateral or binocular vision loss as well as high refractive error, refractive surgery, corneal compromise, and other conditions, which would necessitate additional eye protection. Of the 58 players examined, 3 (5%) were determined to have eye conditions that would require a clear visor as deemed by the expert panel, and 3 (5%) were determined to have eye conditions for which a clear visor was recommended. No players met indications for a tinted visor including congenital eye conditions that limit useful vision in daylight or bright-light environments, acquired conditions that may increase light sensitivity, and light-induced systemic conditions. CONCLUSIONS: This objective list of eye and vision-related systemic conditions is intended to mitigate the risk of long-term eye damage and/or vision deprivation. Clear and especially tinted football helmet visors require the sports medicine team to evaluate factors that will maximize the vision, head, and neck health of the athlete while increasing accessibility to sports for individuals with unique abilities.

Cardiac-Autonomic Responses to In-Season Training Among Division-1 College Football Players.

Flatt, AA, Esco, MR, Allen, JR, Robinson, JB, Bragg, A, Keith, CM, Fedewa, MV, and Earley, RL. Cardiac-autonomic responses to in-season training among Division-1 college football players. J Strength Cond Res 34(6): 1649-1656, 2020-Despite having to endure a rigorous in-season training schedule, research evaluating daily physiological recovery status markers among American football players is limited. The purpose of this study was to determine whether recovery of cardiac-autonomic activity to resting values occurs between consecutive-day, in-season training sessions among college football players. Subjects (n = 29) were divided into groups based on position: receivers and defensive backs (SKILL, n = 10); running backs, linebackers, and tight-ends (MID-SKILL, n = 11) and linemen (LINEMEN, n = 8). Resting heart rate (RHR) and the natural logarithm of the root mean square of successive differences multiplied by 20 (LnRMSSD) were acquired at rest in the seated position before Tuesday and Wednesday training sessions and repeated over 3 weeks during the first month of the competitive season. A position × time interaction was observed for LnRMSSD (p = 0.04), but not for the RHR (p = 0.33). No differences in LnRMSSD between days was observed for SKILL (Tuesday = 82.8 ± 9.3, Wednesday = 81.9 ± 8.7, p > 0.05). Small reductions in LnRMSSD were observed for MID-SKILL (Tuesday = 79.2 ± 9.4, Wednesday = 76.2 ± 9.5, p ≤ 0.05) and LINEMEN (Tuesday = 79.4 ± 10.5, Wednesday = 74.5 ± 11.5, p ≤ 0.05). The individually averaged changes in LnRMSSD from Tuesday to Wednesday were related to PlayerLoad (r = 0.46, p = 0.02) and body mass (r = -0.39, p = 0.04). Cardiac-parasympathetic activity did not return to resting values for LINEMEN or MID-SKILL before the next training session. Larger reductions in LnRMSSD tended to occur in players with greater body mass despite having performed lower workloads, although some individual variability was observed. These findings may have implications for how coaches and support staff address training and recovery interventions for players demonstrating inadequate cardiovascular recovery between sessions.

Spatially resolved ultrasound diagnostics of Li-ion battery electrodes.

The importance of reliable battery diagnostic systems has grown substantially in recent years as a result of the use of high power Li-ion battery packs in an increasingly diverse range of applications. Here, spatially resolved ultrasound acoustic measurements are used to analyse the condition of Li-ion electrodes. Ultrasonic measurements are performed on a commercial mobile phone battery over the full operating voltage window with the lithiation and delithiation of electrodes observed at 36 locations on the surface of the cell. X-ray computed tomography was performed on the cell to ascertain the internal architecture and features that enabled the architecture of the battery to be correlated with the acoustic signature. Analyses of the acoustic signals obtained suggest that the anode and cathode layers can be identified by examining the change in attenuation associated with the charging process. It is also seen that expansions of the electrode layers are inhibited by the presence of the anode current collecting tab in the battery which leads to spatial inhomogeneities in the expansion of the electrode layer examined within the cell.

Heart Rate Variability and Training Load Among National Collegiate Athletic Association Division 1 College Football Players Throughout Spring Camp.

Flatt, AA, Esco, MR, Allen, JR, Robinson, JB, Earley, RL, Fedewa, MV, Bragg, A, Keith, CM, and Wingo, JE. Heart rate variability and training load among National Collegiate Athletic Association Division 1 college football players throughout spring camp. J Strength Cond Res 32(11): 3127-3134, 2018-The purpose of this study was to determine whether recovery of cardiac-autonomic activity to baseline occurs between consecutive-day training sessions among positional groups of a collegiate football team during Spring camp. A secondary aim was to evaluate relationships between chronic (i.e., 4-week) heart rate variability (HRV) and training load parameters. Baseline HRV (lnRMSSD_BL) was compared with HRV after ∼20 hours of recovery before next-day training (lnRMSSDpost20) among positional groups composed of SKILL (n = 11), MID-SKILL (n = 9), and LINEMEN (n = 5) with a linear mixed model and effect sizes (ES). Pearson and partial correlations were used to quantify relationships between chronic mean and coefficient of variation (CV) of lnRMSSD (lnRMSSD_chronic and lnRMSSDcv, respectively) with the mean and CV of PlayerLoad (PL_chronic and PL_cv, respectively). A position × time interaction was observed for lnRMSSD (p = 0.01). lnRMSSD_BL was higher than lnRMSSDpost20 for LINEMEN (p < 0.01; ES = large), whereas differences for SKILL and MID-SKILL were not statistically different (p > 0.05). Players with greater body mass experienced larger reductions in lnRMSSD (r = -0.62, p < 0.01). Longitudinally, lnRMSSDcv was significantly related to body mass (r = 0.48) and PL_chronic (r = -0.60). After adjusting for body mass, lnRMSSDcv and PL_chronic remained significantly related (r = -0.43). The ∼20-hour recovery time between training sessions on consecutive days may not be adequate for restoration of cardiac-parasympathetic activity to baseline among LINEMEN. Players with a lower chronic training load throughout camp experienced greater fluctuation in lnRMSSD (i.e., lnRMSSDcv) and vice versa. Thus, a capacity for greater chronic workloads may be protective against perturbations in cardiac-autonomic homeostasis among American college football players.

An Interdisciplinary Intervention for Fear of Falling: Lessons Learned from Two Case Studies.

This article describes two case studies using an interdisciplinary intervention for homebound older adults who experience fear of falling, resulting in debility and isolation. The patients discussed received separate home visits from a physical therapist (two and four visits) and psychologist (six and eight visits) and intervention components included an initial assessment of physical ability, prescription of home exercise program, exposure therapy, and cognitive restructuring. Both patients reported satisfaction with the fear of falling intervention and showed improved ability to walk, both in distance and in requiring less assistance. These findings suggest significant positive treatment effects can be achieved through interdisciplinary exposure-based interventions aimed at reducing unrealistic fear of falling and associated avoidance behaviors. Similar interventions should be considered for more systematic evaluation of effects and mechanisms of change as well as inclusion in interdisciplinary treatment planning.

Investigating lithium-ion battery materials during overcharge-induced thermal runaway: an operando and multi-scale X-ray CT study.

Catastrophic failure of lithium-ion batteries occurs across multiple length scales and over very short time periods. A combination of high-speed operando tomography, thermal imaging and electrochemical measurements is used to probe the degradation mechanisms leading up to overcharge-induced thermal runaway of a LiCoO2 pouch cell, through its interrelated dynamic structural, thermal and electrical responses. Failure mechanisms across multiple length scales are explored using a post-mortem multi-scale tomography approach, revealing significant morphological and phase changes in the LiCoO2 electrode microstructure and location dependent degradation. This combined operando and multi-scale X-ray computed tomography (CT) technique is demonstrated as a comprehensive approach to understanding battery degradation and failure.

A novel high-temperature furnace for combined in situ synchrotron X-ray diffraction and infrared thermal imaging to investigate the effects of thermal gradients upon the structure of ceramic materials.

A new technique combining in situ X-ray diffraction using synchrotron radiation and infrared thermal imaging is reported. The technique enables the application, generation and measurement of significant thermal gradients, and furthermore allows the direct spatial correlation of thermal and crystallographic measurements. The design and implementation of a novel furnace enabling the simultaneous thermal and X-ray measurements is described. The technique is expected to have wide applicability in material science and engineering; here it has been applied to the study of solid oxide fuel cells at high temperature.

Illuminating Polysulfide Distribution in Lithium Sulfur Batteries; Tracking Polysulfide Shuttle Using Operando Optical Fluorescence Microscopy.

High-energy-density lithium sulfur (Li-S) batteries suffer heavily from the polysulfide shuttle effect, a result of the dissolution and transport of intermediate polysulfides from the cathode, into the electrolyte, and onto the anode, leading to rapid cell degradation. If this primary mechanism of cell failure is to be overcome, the distribution, dynamics, and degree of polysulfide transport must first be understood in depth. In this work, operando optical fluorescence microscope imaging of optically accessible Li-S cells is shown to enable real-time qualitative visualization of the spatial distribution of lithium polysulfides, both within the electrolyte and porous cathode. Quantitative determinations of spatial concentration are also possible at a low enough concentration. The distribution throughout cycling is monitored, including direct observation of polysulfide shuttling to the anode and consequent dendrite formation. This was enabled through the optimization of a selective fluorescent dye, verified to fluoresce proportionally with concentration of polysulfides within Li-S cells. This ability to directly and conveniently track the spatial distribution of soluble polysulfide intermediates in Li-S battery electrolytes, while the cell operates, has the potential to have a widespread impact across the field, for example, by enabling the influence of a variety of polysulfide mitigation strategies to be assessed and optimized, including in this work the LiNO3 additive.

Rigorously extensive orbital-invariant renormalized perturbative triples corrections from quasi-variational coupled cluster theory.

We show that, by making use of the linked tensor objects inherent to the approach, Orbital-optimised Quasi-Variational Coupled Cluster Theory (OQVCCD) leads naturally to a computationally-trivial, rigorously extensive, and orbital-invariant renormalization of the standard (T) correction for the perturbative inclusion of the effects of connected triple excitations. The resulting prototype method, renormalized perturbative triple OQVCCD (R-OQVCCD(T)), is demonstrated to predict potential energy curves for single bond-breaking processes of significantly higher accuracy than OQVCCD with the standard perturbative triple-excitation correction (OQVCCD(T)) itself, and to be in good numerical correspondence with the existing renormalized (R-CCSD(T)) and completely renormalized (CR-CCSD(T)) coupled-cluster singles doubles triples methods, while continuing to provide descriptions of multiple bond-breaking processes of OQVCCD(T) quality.

Physical demands and physiological strain of American football referees while officiating.

OBJECTIVES: Certain occupations are associated with greater risk of triggering a sudden cardiac event because of high levels of physical exertion and extreme thermal environments in which they occur. The extent to which sports officials--particularly high school (HS) American football referees--experience these conditions is unknown. Forty-six male HS officials (72% White/Caucasian; age = 48 ± 12 years, body mass index = 31.7 ± 6.6 kg·m-2) were studied to quantify the physiological strain and physical demands of officiating. METHODS: Referee demographics (e.g., experience, habitual exercise), pre-game urine specific gravity (USG), thermal (peak core temperature [Tcore]) and cardiovascular (average heart rate [HR]) strain, kinematic activity (e.g., total distance, speed, mechanical intensity), and environmental conditions were measured during 10 regular season varsity HS football games (≈2.5 h each) in the Southeastern United States (average wet bulb globe temperature and relative humidity: 18.9 ± 6.0 °C and 78.2% ± 12.1%). Analyses included descriptive statistics, bivariate correlations, and linear regression. RESULTS: Referees covered 5.2 ± 1.2 km per game, eliciting average HR and peak Tcore of 71.5% ± 8.0% HRmax and 38.3 ± 0.5 °C, respectively; 38% began games dehydrated (USG = 1.026 ± 0.004). Multiple regression analyses revealed that obesity (ß = 0.34), not participating in regular exercise (ß = -0.36), and officiating at lower mechanical intensity (ß = -0.33) predicted greater cardiovascular strain (all p ≤ 0.03). White/Caucasian race/ethnicity (ß = 0.59), younger age (ß = -0.46), and obesity (ß = 0.28) predicted greater thermal strain (all p ≤ 0.01). CONCLUSION: HS football referees experienced elevated levels of physiological strain while officiating, with individual factors modulating the magnitude of strain. Strategies aimed at reducing obesity, increasing exercise participation, and improving cardiovascular health should be emphasized to mitigate strain and prevent cardiac events.

Deploying Proteins as Electrolyte Additives in Li-S Batteries: The Multifunctional Role of Fibroin in Improving Cell Performance.

It is widely accepted that the commercial application of lithium-sulfur batteries is inhibited by their short cycle life, which is primarily caused by a combination of Li dendrite formation and active material loss due to polysulfide shuttling. Unfortunately, while numerous approaches to overcome these problems have been reported, most are unscalable and hence further hinder Li-S battery commercialization. Most approaches suggested also only tackle one of the primary mechanisms of cell degradation and failure. Here, we demonstrate that the use of a simple protein, fibroin, as an electrolyte additive can both prevent Li dendrite formation and minimize active material loss to enable high capacity and long cycle life (up to 500 cycles) in Li-S batteries, without inhibiting the rate performance of the cell. Through a combination of experiments and molecular dynamics (MD) simulations, it is demonstrated that the fibroin plays a dual role, both binding to polysulfides to hinder their transport from the cathode and passivating the Li anode to minimize dendrite nucleation and growth. Most importantly, as fibroin is inexpensive and can be simply introduced to the cell via the electrolyte, this work offers a route toward practical industrial applications of a viable Li-S battery system.

Breaking multiple covalent bonds with Hartree-Fock-based quantum chemistry: Quasi-Variational Coupled Cluster theory with perturbative treatment of triple excitations.

We enhance the recently proposed Optimized-orbital Quasi-Variational Coupled Cluster Doubles (OQVCCD) method for the calculation of ground-state molecular electronic structure by augmenting it with the standard perturbative (T) correction for the effects of connected triple excitations. We demonstrate the OQVCCD(T) ansatz to be outstandingly robust and accurate in the description of the breaking of the triple bond in diatomic nitrogen, N2, where traditional CCSD and CCSD(T) completely fail, yet with a computational cost that is nearly the same as that of CCSD(T). This result provides insight into the failure of CCSD(T) and related methods and how it may be overcome.

Application of the quasi-variational coupled cluster method to the nonlinear optical properties of model hydrogen systems.

We present a pilot application of the recently proposed quasi-variational coupled cluster method to the energies, polarizabilities, and second hyperpolarizabilities of model hydrogen chains. Relative to other single-reference methods of equivalent computational complexity, we demonstrate this method to be highly robust and especially useful when traditional coupled cluster theory fails to perform adequately. In particular, our results indicate it to be a suitable method for the black-box treatment of multiradicals, making it of widespread general interest and applicability.

Quasi-variational coupled cluster theory.

We extend our previous work on the construction of new approximations of the variational coupled cluster method. By combining several linked pair functional transformations in such a way as to give appropriately balanced infinite-order contributions, in order to approximate (L) well at all orders, we formulate a new quantum chemical method, which we name quasi-variational coupled cluster. We demonstrate this method to be particularly robust in the regime of strong static electron correlation, improving significantly on our earlier approximate variational coupled cluster approach.

Effective Ultrasound Acoustic Measurement to Monitor the Lithium-Ion Battery Electrode Drying Process with Various Coating Thicknesses.

The electrode drying process (DP) is a crucial step in the lithium-ion battery manufacturing chain and plays a fundamental role in governing the performance of the cells. The DP is extremely complex, with the dynamics and their implication in the production of electrodes generally being poorly understood. To date, there is limited discussion of these processes in the literature due to the limitation of the existing in situ metrology. Here, ultrasound acoustic measurements are demonstrated as a promising tool to monitor the physical evolution of the electrode coating in situ. These observations are validated by gravimetric analysis to show the feasibility of the technique to monitor the DP and identify the three different drying stages. A possible application of this technique is to adjust the drying rates based upon the ultrasound readings at different drying stages and to speed up the drying time. These findings prove that this measurement can be used as a cost-effective and simple tool to provide characteristic diagnostics of the electrode, which can be applied in large-scale coating manufacturing.

Approximate variational coupled cluster theory.

We show that it is possible to construct an accurate approximation to the variational coupled cluster method, limited to double substitutions, from the minimization of a functional that is rigorously extensive, exact for isolated two-electron subsystems and invariant to transformations of the underlying orbital basis. This approximate variational coupled cluster theory is a modification and enhancement of our earlier linked pair functional theory. It is first motivated by the constraint that the inverse square root of the matrix that transforms the cluster amplitudes must exist. Low-order corrections are then included to enhance the accuracy of the approximation of variational coupled cluster, while ensuring that the computational complexity of the method never exceeds that of the standard traditional coupled cluster method. The effects of single excitations are included by energy minimization with respect to the orbitals defining the reference wavefunction. The resulting quantum chemical method is demonstrated to be a robust approach to the calculation of molecular electronic structure and performs well when static correlation effects are strong.

In Situ Ultrasound Acoustic Measurement of the Lithium-Ion Battery Electrode Drying Process.

The electrode drying process is a crucial step in the manufacturing of lithium-ion batteries and can significantly affect the performance of an electrode once stacked in a cell. High drying rates may induce binder migration, which is largely governed by the temperature. Additionally, elevated drying rates will result in a heterogeneous distribution of the soluble and dispersed binder throughout the electrode, potentially accumulating at the surface. The optimized drying rate during the electrode manufacturing process will promote balanced homogeneous binder distribution throughout the electrode film; however, there is a need to develop more informative in situ metrologies to better understand the dynamics of the drying process. Here, ultrasound acoustic-based techniques were developed as an in situ tool to study the electrode drying process using NMC622-based cathodes and graphite-based anodes. The drying dynamic evolution for cathodes dried at 40 and 60 °C and anodes dried at 60 °C were investigated, with the attenuation of the reflective acoustic signals used to indicate the evolution of the physical properties of the electrode-coating film. The drying-induced acoustic signal shifts were discussed critically and correlated to the reported three-stage drying mechanism, offering a new mode for investigating the dynamic drying process. Ultrasound acoustic-based measurements have been successfully shown to be a novel in situ metrology to acquire dynamic drying profiles of lithium-ion battery electrodes. The findings would potentially fulfil the research gaps between acquiring dynamic data continuously for a drying mechanism study and the existing research metrology, as most of the published drying mechanism research studies are based on simulated drying processes. It shows great potential for further development and understanding of the drying process to achieve a more controllable electrode manufacturing process.

Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation.

Tracking the dynamic morphology of active materials during operation of lithium batteries is essential for identifying causes of performance loss. Digital volume correlation (DVC) is applied to high-speed operando synchrotron X-ray computed tomography of a commercial Li/MnO2 primary battery during discharge. Real-time electrode material displacement is captured in 3D allowing degradation mechanisms such as delamination of the electrode from the current collector and electrode crack formation to be identified. Continuum DVC of consecutive images during discharge is used to quantify local displacements and strains in 3D throughout discharge, facilitating tracking of the progression of swelling due to lithiation within the electrode material in a commercial, spiral-wound battery during normal operation. Displacement of the rigid current collector and cell materials contribute to severe electrode detachment and crack formation during discharge, which is monitored by a separate DVC approach. Use of time-lapse X-ray computed tomography coupled with DVC is thus demonstrated as an effective diagnostic technique to identify causes of performance loss within commercial lithium batteries; this novel approach is expected to guide the development of more effective commercial cell designs.

In-operando high-speed tomography of lithium-ion batteries during thermal runaway.

Prevention and mitigation of thermal runaway presents one of the greatest challenges for the safe operation of lithium-ion batteries. Here, we demonstrate for the first time the application of high-speed synchrotron X-ray computed tomography and radiography, in conjunction with thermal imaging, to track the evolution of internal structural damage and thermal behaviour during initiation and propagation of thermal runaway in lithium-ion batteries. This diagnostic approach is applied to commercial lithium-ion batteries (LG 18650 NMC cells), yielding insights into key degradation modes including gas-induced delamination, electrode layer collapse and propagation of structural degradation. It is envisaged that the use of these techniques will lead to major improvements in the design of Li-ion batteries and their safety features.

Benchmark Quasi-Variational Coupled Cluster Calculations of Multiple Bond Breaking.

We present further evidence that closed-shell single-reference coupled cluster theory can be used as a reliable predictive tool even when multiple chemical bonds are broken, provided that a near-variational, rather than a projective, ansatz is used. Building on the Optimized-orbital Quasi-Variational Coupled Cluster Doubles (OQVCCD) method by adding the standard perturbative treatment of triple excitations, the OQVCCD(T) method provides outstanding accuracy for the dissociation of multiply bonded molecules and other problems involving strong nondynamic correlation of the electrons. We find that in the case of singly bonded molecules, OQVCCD and OQVCCD(T) perform similarly to the equivalent Brueckner Coupled Cluster Doubles approaches, BCCD and BCCD(T). However, when multiple bonds are broken, such as in acetylene and dicarbon, OQVCCD(T) is capable of predicting both qualitatively and quantitatively accurate potential energy curves, unlike the standard methods based on traditional coupled cluster theory, and for approximately the same computational cost.