A Crystalline Dimeric Steroidal Diboronate with Electronically Impeded Rotation.

The dimeric steroid SMR-3, featuring a 1,4-phenyldiboronic ester flanked by two pregnan-triol frameworks, was synthesized to explore the intramolecular dynamics of its central component. The structural data from single-crystal X-ray diffraction studies and the Hirshfeld analyses indicate small steric effects around the aromatic ring that should favor the intended motion. However, solid-state NMR data obtained through VT 13C{1H} CPMAS and 2H spin-echo experiments, using the deuterated analogue SMR-3D4, revealed that this component is rigid even at temperatures where other reported steroidal molecular rotors experience fast rotation (85 °C). A combination of classical molecular dynamics, molecular mechanics, and correlated ab initio calculations allowed us to distinguish the steric and electronic factors that restrict the potential motion in this compound. The experimental and computational data reveal that electronic components dominate the behavior and are responsible for the high rotational barrier in the SMR-3 crystal.

Self-Assembly of an Amphiphilic Bile Acid Dimer: A Combined Experimental and Theoretical Study of Its Medium-Responsive Fluorescence.

This work describes the synthesis and aggregation behavior of a dimeric bile acid derivative in which two steroid cores are bridged by a p-di(phenylethynyl)phenylene fluorophore. The studied compound contains three key characteristics: (a) restricted conformational equilibrium in solution, (b) efficient fluorescence conferred by the bridge, and (c) medium responsiveness encoded in the steroid fragments. The incorporation of the three components afforded a compound that generates nano- and micrometric spherical particles with aggregation-responsive fluorescence emission. The observed self-assembly process of the featured molecule was induced by the gradual addition of water to the tetrahydrofuran (THF) solution. This aggregation led to significant changes in fluorescence that went from two bands at λem values of 370 and 390 nm in pure THF to a new spectrum with two maxima at λem values of 395 and 418 nm at high water contents, without a decrease in emission. The observed changes can be ascribed to weakly coupled aggregation, a hypothesis supported by multiscale molecular modeling, which sheds light on the mechanism of the self-assembly of this unconventional amphiphile.

Molecular Cage Assembly by Sn-O-Sn Bridging of Di-, Tri- and Tetranuclear Organotin Tectons: Extending the Spacing in Double Ladder Structures.

Hydrolysis reactions of di- and trinuclear organotin halides yielded large novel cage compounds containing Sn-O-Sn bridges. The molecular structures of two octanuclear tetraorganodistannoxanes showing double-ladder motifs, viz., [{Me3 SiCH2 (Cl)SnCH2 YCH2 Sn(OH)CH2 SiMe3 }2 (µ-O)2 ]2 [1, Y=p-(Me)2 SiC6 H4 -C6 H4 Si(Me)2 ] and [{Me3 SiCH2 (I)SnCH2 YCH2 Sn(OH)CH2 SiMe3 }2 (µ-O)2 ]2 ⋅0.48 I2 [2⋅0.48 I2 , Y=p-(Me)2 SiC6 H4 -C6 H4 Si(Me)2 ], and the hexanuclear cage-compound 1,3,6-C6 H3 (p-C6 H4 Si(Me)2 CH2 Sn(R)2 OSn(R)2 CH2 Si(Me)2 C6 H4 -p)3 C6 H3 -1,3,6 (3, R=CH2 SiMe3 ) are reported. Of these, the co-crystal 2⋅0.48 I2 exhibits the largest spacing of 16.7 Šreported to date for distannoxane-based double ladders. DFT calculations for the hexanuclear cage and a related octanuclear congener accompany the experimental work.

Palladium-Catalyzed Generation of ortho-Quinone Methides. A Three-Component Synthesis of L-Shaped Dimeric Steroidal Scaffolds.

A series of hybrid dimers having orthogonal steroidal cores bridged by a chroman ketal moiety were obtained by Pd-catalyzed three-component reactions of steroid alkynols, 2-formylestradiol 17-monoacetate, and methyl orthoformate, via ortho-quinone methide intermediates. One of the obtained L-shaped scaffolds showed an inefficient crystal packing featuring large channels within the crystal array. Monte Carlo simulations indicate that these voids preferentially allocate n-hexane, opening the way to explore further applications of similar organic crystalline materials as selective hosts for small molecules.

Pairing multicomponent stators with aromatic rotators for new emissive molecular rotors.

We demonstrate here that the Ugi-Sonogashira protocol can be successfully used to obtain five new molecular rotors 10a-e with strong emission. They have been synthesized by combining multicomponent Ugi stators and several aromatic rotary components: phenylene, p-xylene, naphthalene and anthracene. The synthesized conjugated rotors are highly fluorescent (Φf = 0.39 to Φf = 0.10), and changes in their emission were observed upon variations of the surrounding media. Particularly, we found that they are sensitive to aggregation (THF/water) or high viscosity (methanol/glycerol) conditions. This work paves the way to develop new emissive rotors with exciting photophysical properties.

Hydrogen-Bonded Crystalline Molecular Machines with Ultrafast Rotation and Displacive Phase Transitions.

Two new crystalline rotors 1 and 2 assembled through N-H⋅⋅⋅N hydrogen bonds by using halogenated carbazole as stators and 1,4-diaza[2.2.2]bicyclooctane (DABCO) as the rotator, are described. The dynamic characterization through 1 H T1 relaxometry experiments indicate very low rotational activation barriers (Ea ) of 0.67 kcal mol-1 for 1 and 0.26 kcal mol-1 for 2, indicating that DABCO can reach a THz frequency at room temperature in the latter. These Ea values are supported by solid-state density functional theory computations. Interestingly, both supramolecular rotors show a phase transition between 298 and 250 K, revealed by differential scanning calorimetry and single-crystal X-ray diffraction. The subtle changes in the crystalline environment of these rotors that can alter the motion of an almost barrierless DABCO are discussed here.

Diversity-Oriented Synthesis of Highly Fluorescent Fused Isoquinolines for Specific Subcellular Localization.

A multicomponent diversity-oriented synthesis of new highly emissive tetracyclic isoquinolines that target specific organelles is described. The title compounds were prepared via a three-step protocol starting with an Ugi four-component reaction, followed by either an intramolecular alkyne hydroarylation and subsequent alkene isomerization or through a Pomeranz-Fritsch-type cyclization with a final intramolecular Heck reaction. Subcellular localization studies of these compounds using green channel confocal microscopy revealed remarkable and distinctive distribution patterns in live cells, showing an unprecedented high selectivity and imaging contrast. The differentiated organelle visualization-including localizers for mitochondria, lysosomes, Golgi apparatus, endoplasmic reticulum, and plasma membrane-was achieved by varying the nature of the tetracyclic system and substituent pattern, changing the original four-component set in the starting Ugi reaction.

Synthesis and Solid-State Dynamics of a Crystalline Steroid Molecular Rotor without the Alkyne Axle: Steroid Dimers Based on a 1,4-Di(1,3-dioxan-2-yl)benzene Moiety.

Two diastereomeric crystalline steroid dimers were obtained by acid-catalyzed double acetalization of (20S)-5α-pregnan-3ß,16ß,20-triol 3-monoacetate with terephtalaldehyde. These compounds were characterized by NMR in solution, MS, single-crystal X-ray diffraction, and variable-temperature solid-state NMR by 13C cross-polarization magic angle spinning (CPMAS). While the phenylene rotator in the SR diastereomer remains static even at 373 K, the RR isomer shows a slow rotational process of the phenylene ring at temperatures above room temperature and thus may be considered the first crystalline steroid molecular rotor without the alkyne axle.

Throwing in a Monkey Wrench to Test and Determine Geared Motion in the Dynamics of a Crystalline One-Dimensional (1D) Columnar Rotor Array.

Crystals of molecular rotor 1 with a central 1,4-phenylene rotator linked to two molecules of the steroid mestranol were prepared with 1%, 5%, 20%, and up to 40% of the analogous 2, which contains a larger 2,3-difluorophenylene rotator and effectively acts as a monkey wrench that affects the rotation of the host. The packing motif of the desired P32 crystal form consists of 1D columns of nested rotors arranged in helical arrays with the central aromatic rotators disordered over two sites related by 85° rotation about their 1,4-axes. Rotational dynamics measured by quadrupolar echo 2H NMR line shape analysis were analyzed in terms of a process model that involves degenerate 180° jumps in the fast exchange regime combined with a highly correlated and entropically demanding jump of 85° between the two dynamically disordered sites. While the enthalpic and entropic barriers for the 180° jump estimated from 2H T1 measurements were Δ H⧧ = 2.7 ± 0.1 kcal mol-1 and Δ S⧧ = -5.0 ± 0.5 cal mol-1 K-1, respectively, the corresponding parameters for the slower 85° jumps, determined by line shape analysis, were Δ H⧧ = 2.2 kcal mol-1 and Δ S⧧ = -23 cal mol-1 K-1. Increasing amounts of the larger molecular rotor 2 in the solid solution results in significant dynamic perturbations as the guest, acting as a monkey wrench, reaches values of one out of every five molecular rotors in the chain.

Synthesis, Characterization, and Solid State Dynamic Studies of a Hydrogen Bond-Hindered Steroidal Molecular Rotor with a Flexible Axis.

A novel steroid molecular rotor was obtained in four steps from the naturally occurring spirostane sapogenin diosgenin. The structural and dynamic characterization was carried out by solution NMR, VT X-ray diffraction, solid state 13C CPMAS, and solid state 2H NMR experiments. They allowed the identification of a fast dynamic process with a frequency of 14 MHz at room temperature, featuring a barrier to rotation Ea = 7.87 kcal mol-1. The gathered experimental evidence indicated the presence of a hydrogen bond that becomes stronger as the temperature lowers. This interaction was characterized using theoretical calculations, based on topological analyses of the electronic density and energies. In addition, combining theoretical calculations with experimental measurements, it was possible to propose a partition to Ea (∼8 kcal/mol) into three contributions, that are the cost of the intrinsic rotation (∼2 kcal/mol), the hydrogen bond interaction (∼2 kcal/mol), and the packing effects (∼2-3 kcal/mol). The findings from the present work highlight the relevance of the individual components in the function of molecular machines in the solid state.

Synthesis of Structurally Diverse Emissive Molecular Rotors with Four-Component Ugi Stators.

The use of the multicomponent Ugi reaction to rapidly prepare a library of dumbbell-like molecular rotors is highlighted here. The synthetic strategy consisted of the atom-economic access to 15 bulky and structurally diverse iodinated stators, which were cross-coupled to the 1,4-diethynylphenylene rotator. From those experiments, up to six rotors 1a-c and 1l-n were obtained, with yields ranging from 35 to 69% per coupled C-C bond. In addition to the framework diversity, five of these compounds showed aggregate-enhanced emission properties thanks to their conjugated 1,4-bis(phenylethynyl)benzene cores, a property that rises by increasing the water fraction (fw) in their THF solutions. The results highlight the significance of the diversity-oriented synthesis of rapid access to new molecular fluorescent rotors.

Transient Porosity in Densely Packed Crystalline Carbazole-(p-Diethynylphenylene)-Carbazole Rotors: CO2 and Acetone Sorption Properties.

We report for the first time the high sorption properties of a molecular rotor with no permanent voids or channels in its crystal structure. Such crystalline phase originates from THF, DCM, or the irreversible desolvation of entrapped benzene molecules. From these, the benzene in its solvate form acts as rotation stopper, as supported by dynamic characterization using solid-state 2H NMR experiments. In the solvent-free form, the diffusion of small quantities of iodine vapors caused a significant change in the intramolecular rotation, increasing the known activation energy to rotation from 8.5 to 10.6 kcal mol-1. Notably, those results paved the way for the discovery of the high CO2 uptake (201.6 cm3 g-1 at 196 K, under 1 atm) and acetone (5 wt %), a sorption property that was attributed to both, the restriction of the molecular rotation at low temperatures and the flexibility of the molecular axle made of conjugated p-(ethynylphenylene), surrounded by carbazole.

Thermodynamic evaluation of aromatic CH/π interactions and rotational entropy in a molecular rotor.

A molecular rotor built with a stator formed by two rigid 9ß-mestranol units having a 90° bent angle linked to a central phenylene rotator has an ideal structure to examine aromatic CH/π interactions. Energies and populations of the multiple solution conformations from quantum-mechanical calculations and molecular dynamics simulations were combined with variable-temperature (VT) (1)H NMR data to establish the enthalpy of this interaction and the entropy associated with rotation about a single bond. Rotational dynamics in the solid state were determined via VT cross-polarization magic-angle spinning (13)C NMR spectroscopy.

Rotation of a bulky triptycene in the solid state: toward engineered nanoscale artificial molecular machines.

We report the design and dynamics of a solid-state molecular rotor with a large triptycene rotator. With a cross-section and surface area that are 2 and 3 times larger than those of the phenylene rotators previously studied in the solid state, it is expected that van der Waals forces and steric hindrance will render the motion of the larger triptycene more difficult. To address this challenge, we used a rigid and shape-persistent stator in a dendritic structure that reaches ca. 3.6 nm in length. Using variable-temperature solid-state (2)H NMR spectroscopy, we determined a symmetric three-fold rotational potential with a barrier of 10.2 kcal/mol and a pre-exponential factor of 1.1 × 10(10) s(-1), which correspond to ca. 4600 Brownian jumps per second in the solid state at 300 K.

Aggregation-Induced Emission Enhancement and Solid-State Photoswitching of Crystalline Carbazole N-Salicylidene Anilines.

The development of fluorescent stimuli-responsive organic materials has attracted substantial interest due to their increasing optoelectronic applications. This study systematically introduces fluorine atoms on one end of carbazole-based N-salicylidene anilines 5a-5f to elucidate the impact in their solution and solid-state photophysics. The addition of fluorine atoms at one end of the molecule induced significant changes, for example, a reduction in the quantum yield (QY) fluorescence emission in solution, going from QY near unity in compound 5a (QY ∼ 100%) to a negligible emission in 5f (QY < 1%). Similarly, compound 5a showed a very strong aggregation-induced enhancement emission behavior, whereas compounds with a higher fluorine content were almost quenched. Furthermore, the crystalline solid-state photoisomerization in N-salicylidene anilines is not trivial, and only compounds with three (5e) and five fluorine atoms (5f) exhibited reversible solid-state photoisomerization under 405 nm light source irradiation. We propose that the presence of the arene-perfluoroarene interaction in the crystalline array facilitates the latter behavior. Our findings present a comprehensive study of crystal engineering for the obtention of photoswitchable crystalline materials and adjustable photophysics response, paving the way for its implementation in other systems.

Amphidynamic crystals of a steroidal bicyclo[2.2.2]octane rotor: a high symmetry group that rotates faster than smaller methyl and methoxy groups.

The synthesis, crystallization, single crystal X-ray structure, and solid state dynamics of molecular rotor 3 provided with a high symmetry order and relatively cylindrical bicyclo[2.2.2]octane (BCO) rotator linked to mestranol fragments were investigated in this work. By use of solid state (13)C NMR, three rotating fragments were identified within the molecule: the BCO, the C19 methoxy and the C18 methyl groups. To determine the dynamics of the BCO group in crystals of 3 by variable temperature (1)H spin-lattice relaxation (VT (1)H T1), we determined the (1)H T1 contributions from the methoxy group C19 by carrying out measurements with the methoxy-deuterated isotopologue rotor 3-d6. The contributions from the quaternary methyl group C18 were estimated by considering the differences between the VT (1)H T1 of mestranol 8 and methoxy-deuterated mestranol 8-d3. From these studies it was determined that the BCO rotator in 3 has an activation energy of only 1.15 kcal mol(-1), with a barrier for site exchange that is smaller than those of methyl (E(a) = 1.35 kcal mol(-1)) and methoxy groups (E(a) = 1.92 kcal mol(-1)), despite their smaller moments of inertia and surface areas.

Toward crystalline molecular rotors with linearly conjugated diethynyl-phenylene rotators and pentiptycene stators.

A strategy for the construction of crystalline molecular rotors involves the assemblage of chemical structures that emulate the elements of macroscopic rotary devices, such as those found in macroscopic gyroscopes and compasses. In this report, we describe an efficient and short synthetic route for preparation of molecular rotors with two pentiptycene-units linked at their central benzene ring by triple bonds to a linearly conjugated phenylene rotator. Five analogous compounds with phenol, alkoxy, or alkoxycarbonyl substituents were synthesized and fully characterized in solution and in the solid-state through various methods, such as cross-polarization magic angle spinning (CPMAS) (13)C NMR and single crystal X-ray diffraction. Molecular and packing structures obtained from single crystal X-ray diffraction and crystallization properties were analyzed with the goal of identifying the key parameters that may hinder or facilitate the formation of dynamically functional, crystalline molecular rotors.

Macrocyclic molecular rotors with bridged steroidal frameworks.

In this work, we describe the synthesis and solid-state dynamics of isomeric molecular rotors 7E and 7Z, consisting of two androstane steroidal frameworks linked by the D rings by triple bonds at their C17 positions to a 1,4-phenylene rotator. They are also linked by the A rings by an alkenyl diester bridge to restrict the conformational flexibility of the molecules and reduce the number of potential crystalline arrays. The analysis of the resulting molecular structures and packing motifs offered insights of the internal dynamics that were later elucidated by means of line shape analyses of the spectral features obtained through variable-temperature solid-state (13)C NMR; such analysis revealed rotations in the solid state occurring at kilohertz frequency at room temperature.

Synthesis and evaluation of molecular rotors with large and bulky tert-butyldiphenylsilyloxy-substituted trityl stators.

The search for voluminous stators that may accommodate large rotator units and speed rotational dynamics in the solid state led us to investigate a simple and efficient method for the synthesis of molecular rotors with tert-butyldiphenylsilyl-protected (TBDPS) triphenylmethyl stators. Additionally, solid state characterization of these systems with two-, four-, and six-TBDPS groups provided us with a description of their crystallinity and thermal stability. Among them, molecular rotor 7c with the largest and most symmetric stator resulting from six peripheral silyl groups showed the best tendency to crystallize, and the study of its isotopologue 7c-d(4) by solid state (2)H NMR revealed a 2-fold motion of the 1,4-diethynylphenylene-d(4) rotator in the kHz regime.

9-Trifluoromethylxanthenediols: Synthesis and Supramolecular Motifs.

The synthesis of four derivatives and the single-crystal X-ray structures of six 9-trifluoromethylxanthenediols (TFXdiols) I-VI are analyzed in this work. These compounds were obtained through superacid-catalyzed condensation of dihydroxybenzenes with 1,1,1-trifluoroacetone or 2,2,2-trifluoroacetophenone. The title molecules have a convex molecular structure due to their three fused rings of the xanthene moiety. We have found that, similar to resorcinol, the configuration of the hydroxyl groups is of great relevance for the crystal packing favoring either interactions above and below their molecular plane or lateral interactions that create layers. Considering that reports of TFXdiols are very scarce, our findings contribute to a better understanding of the molecular conformation and intermolecular interactions in their crystal structures. A similar analysis was extended to a fortuitous cocrystal obtained between 9-trifluoromethyl-9-(4'-fluorophenyl)-xanthenediol and 1,4-dihydroxybenzene, showing that these structures might be used to obtain cocrystals in the future.