Flexural Properties of Lattices Fabricated with Planar and Curved Layered Fused Filament Fabrication.

The use of curved layers in fused filament fabrication could lead to various advantages in surface finishing and mechanical properties. Here, the influence of three different structural and manufacturing parameters (volume fraction, raster arrangement, and the use of curved or planar layers) on the mechanical properties of lattice structures under three-point bending is studied. Two different raster arrangements were considered, i.e., those with rasters at planes parallel to the principal axes of the samples and those diagonally arranged, all at four different volume fractions. All different samples were additively manufactured using planar and curved layers. Samples were further dimensionally inspected to refine the computational models before their analysis via finite element simulations. The linear elastic region of the load-displacement curves was further analyzed numerically via finite element models. Predictions with finite element models resulted in good agreement with errors below 10%. Samples with diagonal rasters were 70% softer than those parallel to the principal axes.

Evaluation of a Fast Test Based on Biometric Signals to Assess Mental Fatigue at the Workplace-A Pilot Study.

Non-pathological mental fatigue is a recurring, but undesirable condition among people in the fields of office work, industry, and education. This type of mental fatigue can often lead to negative outcomes, such as performance reduction and cognitive impairment in education; loss of focus and burnout syndrome in office work; and accidents leading to injuries or death in the transportation and manufacturing industries. Reliable mental fatigue assessment tools are promising in the improvement of performance, mental health and safety of students and workers, and at the same time, in the reduction of risks, accidents and the associated economic loss (e.g., medical fees and equipment reparations). The analysis of biometric (brain, cardiac, skin conductance) signals has proven to be effective in discerning different stages of mental fatigue; however, many of the reported studies in the literature involve the use of long fatigue-inducing tests and subject-specific models in their methodologies. Recent trends in the modeling of mental fatigue suggest the usage of non subject-specific (general) classifiers and a time reduction of calibration procedures and experimental setups. In this study, the evaluation of a fast and short-calibration mental fatigue assessment tool based on biometric signals and inter-subject modeling, using multiple linear regression, is presented. The proposed tool does not require fatigue-inducing tests, which allows fast setup and implementation. Electroencephalography, photopletismography, electrodermal activity, and skin temperature from 17 subjects were recorded, using an OpenBCI helmet and an Empatica E4 wristband. Correlations to self-reported mental fatigue levels (using the fatigue assessment scale) were calculated to find the best mental fatigue predictors. Three-class mental fatigue models were evaluated, and the best model obtained an accuracy of 88% using three features, ß/θ (C3), and the α/θ (O2 and C3) ratios, from one minute of electroencephalography measurements. The results from this pilot study show the feasibility and potential of short-calibration procedures and inter-subject classifiers in mental fatigue modeling, and will contribute to the use of wearable devices for the development of tools oriented to the well-being of workers and students, and also in daily living activities.

Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches.

The increase in accessibility of fused filament fabrication (FFF) machines has inspired the scientific community to work towards the understanding of the structural performance of components fabricated with this technology. Numerous attempts to characterize and to estimate the mechanical properties of structures fabricated with FFF have been reported in the literature. Experimental characterization of printed components has been reported extensively. However, few attempts have been made to predict properties of printed structures with computational models, and a lot less work with analytical approximations. As a result, a thorough review of reported experimental characterization and predictive models is presented with the aim of summarizing applicability and limitations of those approaches. Finally, recommendations on practices for characterizing printed materials are given and areas that deserve further research are proposed.