Charge-Transfer Complexes: Halogen-Doped Anthracene as a Case of Study.

Charge transfer (CT) crystals exhibit unique electronic and magnetic properties with interesting applications. We present a rational and easy guide which allows to foresee the effective charge transfer co-crystal production and that is based on the comparison of the frontier molecular orbital (MO) energies of a donor and acceptor couple. For the sake of comparison, theoretical calculations have been carried out by using the cheap and fast PM6 semiempirical Hamiltonian and pure HF/cc-pVTZ level of the theory. The results are then compared with experimental results obtained both by chemical (bromine and iodine were used as the acceptor) and electrochemical doping (exploiting an original experimental set-up by this laboratory: the electrochemical transistor). Infra-red vibrational experimental results and theoretically calculated spectra are compared to assess both the effective donor-acceptor (D/A) charge-transfer and transport mechanism (giant IRAV polaron signature). XPS spectra have been collected (carbon (1 s) and iodine (3d5/2)) signals, yielding further evidence of the effective formation of the CT anthracene:iodine complex.

Light on the sustainable preparation of aryl-cored dibromides.

Both aryl and benzyl polybromides have gained significant importance as reactive building blocks in polymer and materials chemistry. Their preparation primarily relies on established synthetic methods using molecular bromine or N-bromosuccinimide, known for their reliability and effectiveness. However, from a sustainability perspective, these methods suffer from the generation of stoichiometric amounts of byproducts and often encounter selectivity troubles. To mitigate these issues, we extended the greener peroxide-bromide halogenation method, initially developed for monobromides, to afford aryl-cored polybromides in high yields. The same method can be employed in two variants modulated by light irradiation. This external switch can be used to selectively trigger side-chain or core halogenation.

Filling the Gap in Extended Metal Atom Chains: Ferromagnetic Interactions in a Tetrairon(II) String Supported by Oligo-α-pyridylamido Ligands.

The stringlike complex [Fe4(tpda)3Cl2] (2; H2tpda = N2, N6-bis(pyridin-2-yl)pyridine-2,6-diamine) was obtained as the first homometallic extended metal atom chain based on iron(II) and oligo-α-pyridylamido ligands. The synthesis was performed under strictly anaerobic and anhydrous conditions using dimesityliron, [Fe2(Mes)4] (1; HMes = mesitylene), as both an iron source and a deprotonating agent for H2tpda. The four lined-up iron(II) ions in the structure of 2 (Fe···Fe = 2.94-2.99 Å, Fe···Fe···Fe = 171.7-168.8°) are wrapped by three doubly deprotonated twisted ligands, and the chain is capped at its termini by two chloride ions. The spectroscopic and electronic properties of 2 were investigated in dichloromethane by UV-vis-NIR absorption spectroscopy, 1H NMR spectroscopy, and cyclic voltammetry. The electrochemical measurements showed four fully resolved, quasi-reversible one-electron-redox processes, implying that 2 can adopt five oxidation states in a potential window of only 0.8 V. Direct current (dc) magnetic measurements indicate dominant ferromagnetic coupling at room temperature, although the ground state is only weakly magnetic. On the basis of density functional theory and angular overlap model calculations, this magnetic behavior was explained as being due to two pairs of ferromagnetically coupled iron(II) ions ( J = -21 cm-1 using JS i·S j convention) weakly antiferromagnetically coupled with each other. Alternating-current susceptibility data in the presence of a 2 kOe dc field and at frequencies up to 1.5 kHz revealed the onset of slow magnetic relaxation below 2.8 K, with the estimated energy barrier Ueff/ kB = 10.1(1.3) K.

Axially Chiral Enamides: Substituent Effects, Rotation Barriers, and Implications for their Cyclization Reactions.

The barrier to rotation around the N-alkenyl bond of 38 N-alkenyl-N-alkylacetamide derivatives was measured (ΔG(⧧) rotation varied between <8.0 and 31.0 kcal mol(-1)). The most important factor in controlling the rate of rotation was the level of alkene substitution, followed by the size of the nitrogen substituent and, finally, the size of the acyl substituent. Tertiary enamides with four alkenyl substituents exhibited half-lives for rotation between 5.5 days and 99 years at 298 K, sufficient to isolate enantiomerically enriched atropisomers. The radical cyclizations of a subset of N-alkenyl-N-benzyl-α-haloacetamides exhibiting relatively high barriers to rotation round the N-alkenyl bond (ΔG(⧧) rotation >20 kcal mol(-1)) were studied to determine the regiochemistry of cyclization. Those with high barriers (>27 kcal mol(-1)) did not lead to cyclization, but those with lower values produced highly functionalized γ-lactams via a 5-endo-trig radical-polar crossover process that was terminated by reduction, an unusual cyclopropanation sequence, or trapping with H2O, depending upon the reaction conditions. Because elevated temperatures were necessary for cyclization, this precluded study of the asymmetric transfer in the reaction of individual atropisomers. However, enantiomerically enriched atropsiomeric enamides should be regarded as potential asymmetric building blocks for reactions that can be accomplished at room temperature.

Novel route to chaetomellic acid A and analogues: serendipitous discovery of a more competent FTase inhibitor.

A new practical route to chaetomellic acid A (ACA), based on the copper catalysed radical cyclization (RC) of (Z)-3-(2,2-dichloropropanoyl)-2-pentadecylidene-1,3-thiazinane, is described. Remarkably, the process entailed: (i) a one-pot preparation of the intermediate N-α-perchloroacyl-2-(Z)-alkyliden-1,3-thiazinanes starting from N-(3-hydroxypropyl)palmitamide, (ii) a two step smooth transformation of the RC products into ACA and (iii) only one intermediate chromatographic purification step. The method offers a versatile approach to the preparation of ACA analogues, through the synthesis of an intermediate maleic anhydride with a vinylic group at the end of the aliphatic tail, a function that can be transformed through a thiol-ene coupling. Serendipitously, the disodium salt of 2-(9-(butylthio)nonyl)-3-methylmaleic acid, that we prepared as a representative sulfurated ACA analogue, was a more competent FTase inhibitor than ACA. This behaviour was analysed by a molecular docking study.

Waste By-Product of Grape Seed Oil Production: Chemical Characterization for Use as a Food and Feed Supplement.

Among the waste materials of wine production, grape seeds constitute an important fraction of the pomace, from which the precious edible oil is extracted. The residual mass from oil extraction, the defatted grape seeds (DGS), can be destined for composting or valorized according to the circular economy rules to produce pyrolytic biochar by gasification or pellets for integral energy recovery. Only a small quantity is used for subsequent extraction of polyphenols and tannins. In this study, we performed a chemical characterization of the DGS, by applying spectroscopic techniques (ICP-OES) to determine the metal content, separation techniques (HS-SPME-GC-MS) to evaluate the volatile fraction, and thermal methods of analysis (TGA-MS-EGA) to identify different matrix constituents. Our main goal is to obtain information about the composition of DGS and identify some bioactive compounds constituting the matrix in view of possible future applications. The results suggest that DGS can be further exploited as a dietary supplement, or as an enriching ingredient in foods, for example, in baked goods. Defatted grape seed flour can be used for both human and animal consumption, as it is a source of functional macro- and micronutrients that help in maintaining optimal health and well-being conditions.

A Continuous Extraction Protocol for the Characterisation of a Sustainably Produced Natural Indigo Pigment.

The sustainable industrial production of indigo necessitates a unique extraction process to separate the plant-derived compounds. Calcium compounds are added to encourage hydrolysis of these precursors and to facilitate the isolation of the final form, resulting in an organic-inorganic composite pigment with unspecified characteristics. In this study, we devised a continuous solvent extraction procedure to fractionate the organic indigoid phase within the composite pigment. Overcoming challenges posed by limited solubility in the common organic solvents, this method allows for the analysis of individual fractions, significantly enhancing resolution. Comprehensive characterisation using spectroscopic analysis, thermogravimetry, and UHPLC-MS/MS revealed the potential for quantifying primary components of the natural pigment and distinct differentiation from the synthetic dye. This approach also holds promise for establishing robust manufacturing practices in the industrial production of natural indigo.

Upgrading of Biobased Glycerol to Glycerol Carbonate as a Tool to Reduce the CO2 Emissions of the Biodiesel Fuel Life Cycle.

With regards to oil-based diesel fuel, the adoption of bio-derived diesel fuel was estimated to reduce CO2 emissions by approximately 75%, considering the whole life cycle. In this paper, we present a novel continuous-flow process able to transfer an equimolar amount of CO2 (through urea) to glycerol, producing glycerol carbonate. This represents a convenient tool, able to both improve the efficiency of the biodiesel production through the conversion of waste streams into added-value chemicals and to beneficially contribute to the whole carbon cycle. By means of a Design of Experiments approach, the influence of key operating variables on the product yield was studied and statistically modeled.

Solution structure of a pentachromium(ii) single molecule magnet from DFT calculations, isotopic labelling and multinuclear NMR spectroscopy.

The structure of pentachromium(ii) extended metal atom chain [Cr5(tpda)4Cl2] (2), which behaves as a single molecule magnet at low temperature, was investigated by Density Functional Theory (DFT) calculations and spectroscopic studies without the constraints of a crystal lattice (H2tpda = N2,N6-bis(pyridin-2-yl)pyridine-2,6-diamine). DFT studies both in the gas phase and including CH2Cl2 solvent effects indicate that an unsymmetric structure (C4 point group), with pairs of formally quadruply-bonded metal ions and one terminal metal center, is slightly more stable (2.9 and 3.9 kcal mol-1) than a symmetric structure (D4 point group). Isotopically-labelled samples (2-d8 and 2-d16) have then been prepared to aid in molecular symmetry determination by combined 1H and 2H NMR studies in dichloromethane solution. The spectra are strongly suggestive of a symmetric (D4) framework, indicating fast shuttling between the two unsymmetric forms over the timescale of NMR experiments. Procedures for a high-yield Pd-free synthesis of H2tpda and for site-selective post-synthetic H/D exchange of aromatic H2tpda hydrogens are also reported.