Rapid Identification Method for CH4/CO/CH4-CO Gas Mixtures Based on Electronic Nose.

The inherent cross-sensitivity of semiconductor gas sensors makes them extremely challenging to accurately detect mixed gases. In order to solve this problem, this paper designed an electronic nose (E-nose) with seven gas sensors and proposed a rapid method for identifying CH4, CO, and their mixtures. Most reported methods for E-nose were based on analyzing the entire response process and employing complex algorithms, such as neural network, which result in long time-consuming processes for gas detection and identification. To overcome these shortcomings, this paper firstly proposes a way to shorten the gas detection time by analyzing only the start stage of the E-nose response instead of the entire response process. Subsequently, two polynomial fitting methods for extracting gas features are designed according to the characteristics of the E-nose response curves. Finally, in order to shorten the time consumption of calculation and reduce the complexity of the identification model, linear discriminant analysis (LDA) is introduced to reduce the dimensionality of the extracted feature datasets, and an XGBoost-based gas identification model is trained using the LDA optimized feature datasets. The experimental results show that the proposed method can shorten the gas detection time, obtain sufficient gas features, and achieve nearly 100% identification accuracy for CH4, CO, and their mixed gases.

Application of the Modified Basic Life Support Training Model in Improving Community Residents' Rescue Willingness in Nantong City in China.

Objective: This study explores the application and effect of the modified basic life support training in improving the first-aid level and rescue willingness of community residents in China. Methods: A total of 94 residents of a community in Nantong city were selected as the subjects by cluster sampling to receive the modified basic life support (BLS) training. The BLS knowledge, attitudes, and behaviors of all recruited subjects were evaluated by a questionnaire before and after training. A skill operation assessment was used to evaluate the effectiveness of the modified BLS training. Results: There were statistically significant differences in the BLS rescue willingness, theory, and skill scores before and after the training (P < 0.01). A total of 93.62% of the residents considered the modified BLS training model easier to learn and acceptable than the traditional model, and 92.55% of them thought the training content and teaching arrangement were reasonable. Conclusion: The modified BLS training model could improve the community residents' rescue willingness and skill mastery rates, enhance their first-aid skills and awareness, reduce the risk of disease transmission to a certain extent, and improve the success rate of prehospital first aid to ensure the safety of rescuers and patients.

Magnetic-assisted laparoscopic liver transplantation in swine.

BACKGROUND: Although laparoscopic technology has achieved rapid development in the surgical field, it has not been applied to liver transplantation, primarily because of difficulties associated with laparoscopic vascular anastomosis. In this study, we introduced a new magnetic-assisted vascular anastomosis technique and explored its application in laparoscopic liver transplantation in pigs. METHODS: Two sets of magnetic vascular anastomosis rings (MVARs) with different diameters were developed. One set was used for anastomosis of the suprahepatic vena cava (SHVC) and the other set was used for anastomosis of the infrahepatic vena cava (IHVC) and portal vein (PV). Six laparoscopic orthotopic liver transplantations were performed in pigs. Donor liver was obtained via open surgery. Hepatectomy was performed in the recipients through laparoscopic surgery. Anastomosis of the SHVC was performed using hand-assisted magnetic anastomosis, and the anastomosis of the IHVC and PV was performed by magnetic anastomosis with or without hand assistance. RESULTS: Liver transplants were successfully performed in five of the six cases. Postoperative ultrasonographic examination showed that the portal inflow was smooth. However, PV bending and blood flow obstruction occurred in one case because the MVARs were attached to each other. The durations of loading of MVAR in the laparoscope group and manual assistance group for IHVC and PV were 13 ± 5 vs. 5 ± 1 min (P < 0.01) and 10 ± 2 vs. 4 ± 1 min (P < 0.05), respectively. The durations of MVAR anastomosis in the laparoscope group and manual assistance group for IHVC and PV were 5 ± 1 vs. 1 ± 1 min (P < 0.01), and 5 ± 1 vs. 1 ± 1 min (P < 0.01), respectively. The anhepatic phase was 43 ± 4 min in the laparoscope group and 23 ± 2 min in the manual assistance group (P < 0.01). CONCLUSIONS: Our study showed that magnetic-assisted laparoscopic liver transplantation can be successfully carried out in pigs.

A Bidirectional Nanomodification Approach for Synthesizing Hierarchically Architected Mixed Oxide Electrodes for Oxygen Evolution.

Several transition-metal oxides and hydroxides based on earth-abundant elements, such as Fe, Ni, and Co, have emerged as a new generation of oxygen evolution reaction (OER) catalysts due to their low cost, favorable activity, and multifunctional behavior. However, the relatively complicated surface structuring methods, high Tafel slope, and low stability hinder their practical applications to replace the conventional Ir- and Ru-based catalysts. Herein, a strategy to construct hierarchically architected mixed oxides on conductive substrates (e.g., ITO and Ni foam) via a nanosheet (NS) deposition and subsequent bidirectional nanomodification approach, with metal salts in an aprotic polar solvent (e.g., acetone) as the primary modifying reactants is reported. This strategy is used to prepare NiO-based NSs with nanopores, nanobranches, or a combination of both, containing up to four transition metal elements. Record-low Tafel slope (22.3 mV·dec-1 , ≈lowest possible by computational predictions) and week-long continuous operation durability are achieved by FeMnNi-O NSs supported on Ni foams. Taken together, properly designed hierarchical mixed oxide electrodes may provide a cost-effective route to generating high, reliable, and stable OER catalytic activities, paving the way for both new electrocatalyst design and practical water-splitting devices.

Ultrasensitive ppb-level trimethylamine gas sensor based on p-n heterojunction of Co3O4/WO3.

Trace poisonous and harmful gases in the air have been harming and affecting people's health for a long time. At present, effective and accurate detection of ppb-level harmful gas is still a bottleneck to be overcome. Herein, we report a ppb-level triethylamine (TEA) gas sensor based on p-n heterojunction of Co3O4/WO3, which is prepared with ZIF-67 as the precursor and provides Co3O4deposited tungsten oxide flower-like structure. Due to the introduction of Co3O4and the 3D flower-like structure of WO3, the Co3O4/WO3-2 gas sensor shows excellent gas sensing performance (1101 for 10 ppm at 240 °C), superb selectivity, good long-term stability and linear response for TEA concentration. Moreover, the experimental results indicate that the Co3O4/WO3-2 gas sensor also possesses a good response to 50 ppb TEA, in fact, the theoretical limit of detection is 0.6 ppb. Co3O4not only improves the efficiency of electron separation/transport, but also accelerates the oxidation rate of TEA. This method of synthesizing p-n heterojunction with ZIF as the precursor provides a new idea and method for the preparation of low detection limit gas sensors.

Enhanced performance of an acetone gas sensor based on Ag-LaFeO3 molecular imprinted polymers and carbon nanotubes composite.

High performance acetone gas sensors were fabricated with molecular imprinted polymers of Ag-LaFeO3 (ALFOMMIPs) and multi walled carbon nanotubes (CNTs) composite using the microwave assisted sol-gel method. The crystalline structure, functional groups, grain size and surface appearance of the synthesized materials were analyzed via different characterization techniques and the gas responses of the samples were examined. The detailed acetone gas sensing tests and analysis revealed that the CNTs and ALFOMIPs nanocomposite (CNT/ALFOMIP) sample possessed a higher response than that of the ALFOMIPs sample. Where 0.75 wt% CNTs were added into the ALFOMIPs (0.75% CNT/ALFOMIP nanocomposite) sensor, an excellent gas sensing performance was exhibited. The response of this sensor was up to 59 for 5 ppm acetone vapors and the response and recovery times were 58 and 33 s at low working temperature of 86 °C, respectively. In addition, it had the best selectivity only to acetone vapors due to the use of the molecular imprinting technique.

Ultrasensitive xylene gas sensor based on flower-like SnO2/Co3O4 nanorods composites prepared by facile two-step synthesis method.

Xylene is a volatile organic compound which is harmful to the human health and requires precise detection. The detection of xylene by an oxide semiconductor gas sensor is an important research direction. In this work, Co3O4 decorated flower-like SnO2 nanorods (SnO2/Co3O4 NRs) were synthesized by a simple and effective two-step method. The SnO2/Co3O4 NRs show high xylene response (R g/R a = 47.8 for 100 ppm) and selectivity at the operating temperature of 280 °C, and exhibit high stability in continuous testing. The resulting SnO2/Co3O4 NRs nanocomposites show superior sensing performance towards xylene in comparison with pure SnO2 nanorods. The remarkable enhancement in the gas-sensing properties of SnO2/Co3O4 NRs are attributed to larger specific surface area and the formation of p-n heterojunction between Co3O4 and SnO2. These results demonstrate that particular nanostructures and synergistic effect of SnO2 and Co3O4 enable gas sensors to selectively detect xylene.

Effects of Different 980-nm Diode Laser Parameters in Hepatectomy.

BACKGROUND AND OBJECTIVE: Despite the successful application of laser in animal experiments and clinics, the adjustment of laser parameters during surgery is still unclear. This study aimed to investigate the effect of different 980-nm diode laser parameters in hepatectomy. This could provide a clear protocol for using 980-nm diode laser in hepatectomy. STUDY DESIGN/MATERIALS AND METHODS: In total, 48 Sprague-Dawley rats were used to explore the effects of different 980-nm diode laser parameters in hepatectomy, by setting different parameter combinations. The rats were randomly divided into eight groups, including the continuous wave group and quasi-continuous wave group. The effects were assessed in terms of liver resection speed, extent of intraoperative bleeding, and thermal damage. RESULTS: In the quasi-continuous wave group, there was a significant difference in resection speed at the different laser parameters (P < 0.001); however, there was no significant difference in intraoperative bleeding and thermal damage. In the continuous wave group, there was a significant difference in resection speed, intraoperative bleeding, and thermal damage at different parameters. CONCLUSION: The study showed that the average power determined hemostasis efficiency and thermal damage, and peak power determined the liver resection speed, whereas the pulse width and repetition frequency are not independent factors. When using 980-nm diode laser in hepatectomy, the average power should be decreased to prove hemostasis efficiency in delicate operations, and the peak power should be decreased to accelerate the procedure without worsening thermal damage. Lasers Surg. Med. © 2019 Wiley Periodicals, Inc.

Highly selective and sensitive methanol gas sensor based on molecular imprinted silver-doped LaFeO3 core-shell and cage structures.

Silver-doped LaFeO3 molecularly imprinted polymers (SLMIPs) were synthesized by a sol-gel method combined with molecularly imprinted technology as precursors. The precursors were then used to prepare SLMIPs cage (SLM-cage) and SLMIPs core-shell (SLM-core-shell) structures by using a carbon sphere as the template and hydrothermal synthesis, respectively. The structures, morphologies, and surface areas of these materials were determined, as well as their gas-sensing properties and related mechanisms. The SLM-cage and SLM-core-shell samples exhibited good responses to methanol gas, with excellent selectivity. The response and optimum working temperature were 16.98 °C and 215 °C, 33.7 °C and 195 °C, respectively, with corresponding response and recovery times of 45 and 50 s (SLM-cage) and 42 and 57 s (SLM-core-shell) for 5 ppm methanol gas. Notably, the SLM-cage and SLM-core-shell samples exhibited lower responses (≤5 and ≤7, respectively) to other gases, including ethanol, ammonia, benzene, acetone, and toluene. Thus, these materials show potential as practical methanol detectors.

Current Technologies of Synthetic Biosensors for Disease Detection: Design, Classification and Future Perspectives.

Synthetic biology aims to endow living cells with new functions by incorporating functional gene networks into them. By overexpressing, blocking and rewiring native gene pathways, synthetic biologists have harnessed this promising technology to reprogram cells to perform diverse tasks such as drug discovery, biopharmaceutical manufacturing, gene therapy and tissue engineering, etc. In this review, we focus on current technologies of synthetic biosensors for disease detection. We start with the design principle of synthetic biosensors. Then we move towards the characteristics of simple synthetic biosensors, which can respond to a single input signal, and complex synthetic biosensors including Boolean gate biosensors, cascade biosensors, time-delay biosensors, oscillator biosensors and hysteretic biosensors, which can respond to more than two input signals and perform complex tasks. Synthetic biosensor has showed great potential in disease detection, but it is still in its infancy stage. More efforts should be made in identifying and constructing clinically relevant regulation systems. Computational tools are also needed in the design process in order to guarantee the precision of the synthetic biosensor. The ultimate goal of a synthetic biosensor is to act as a therapeutic sensor-effector device that connects diagnostic input with therapeutic output and therefore provides all-in-one diagnostic and therapeutic solutions for future gene- and cell-based therapies.

Safety pharmacology and subchronic toxicity of jinqing granules in rats.

BACKGROUND: Jinqing granules which are made of a mixture extract that contains Radix Tinosporae and Canarii fructus in proportions according to a longstanding formula have a good effect on the prevention and treatment of gastric ulcer disease. It has not been through safety through systematic toxicological studies, however. To provide basis for clinical application, we performed safety pharmacology and subchronic toxicity experiments in specific pathogen-free Sprague-Dawley rats. RESULTS: In safety pharmacology experiments, Jinqing granules had no evident adverse effects on the central nervous, cardiovascular, or respiratory systems. In subchronic toxicity study, 2-8 g/kg of Jinqing granules induced no evident adverse effects on Clinical signs, body weight changes, food and water intake, death daily, indicators of urine, hematological assay, serum biochemistry, organ coefficient and histopathological examination. However, the 16 g/kg dose was associated with slightly slowed weight growth, decreased number of sperm in seminiferous tubules and increased values of serum aspartate aminotransferase and bilirubin. During the 30-day feeding test, 3 rats that received the 16 g/kg dose died, but the deaths were most likely due to trauma of oral gavage, not to drug toxicity. CONCLUSION: Jinqing granules given to Sprague-Dawley rats orally for 30 days at a dose of 8 g/kg or less appears safe, but higher doses were not proven safe. The significance of these observations with respect to animal usage of Jinqing granules deserves thorough investigation.

In vitro and in vivo bactericidal activity of Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo and its main effective component, palmatine, against porcine Helicobacter pylori.

BACKGROUND: Tinospora sagittata (Oliv.) Gagnep. var. craveniana (S.Y.Hu) Lo (TSG) is a traditional Chinese herb that has been used for the treatment of upper respiratory tract infection and has anti-bacterial and anti-ulcer activity. Our study investigated the bactericidal effects of TSG and its major component, palmatine, against a Helicobacter pylori (H. pylori) strain isolated from pig and the standard strain H. pylori SS1 in vitro and in vivo. METHODS: H. pylori was isolated from pig and named H. pylori SCYA201401. For in vitro experiments, the inhibitory activity of TSG and palmatine against H. pylori SCYA201401 and H. pylori SS1 were tested by use of the agar cup diffusion technique. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) were determined from the absence of H. pylori colonies on agar plates. Time-kill curves were used to evaluate bactericidal activity; the average number of colonies was calculated at 0 to 48 h after liquid incubation, with concentrations of drugs at 0.5, 1, and 2 × MIC. For in vivo experiments, H. pylori SCYA201401-infected mice were randomly divided into TSG, palmatine, triple therapy (omeprazole, clarithromycin, and amoxicillin), blank control, and model groups. The eradication ratios were determined by use of rapid urease tests and bacterial culture. RESULTS: In vitro, the MIC and MBC of TSG against H. pylori SCYA201401 and SS1 were both 6250 µg/mL, whereas palmatine against H. pylori SCYA201401 was 6.25 µg/mL and against H. pylori SS1 was 3.12 µg/mL. The time-kill curves showed a dose-dependent, progressive decline in the numbers of viable bacteria up to 40 h. In vivo, the eradication ratios in the TSG and palmatine groups of mice were 80 and 50 % compared with 70 % in the triple-therapy group. CONCLUSION: TSG and its major component, palmatine, have bactericidal activity against H. pylori in vitro and in vivo. The possibility that TSG or palmatine can be effective in the treatment of human and animals H. pylori infection deserves investigation.

Milk fat globule epidermal growth factor 8 alleviates liver injury in severe acute pancreatitis by restoring autophagy flux and inhibiting ferroptosis in hepatocytes.

BACKGROUND: Liver injury is common in severe acute pancreatitis (SAP). Excessive autophagy often leads to an imbalance of homeostasis in hepatocytes, which induces lipid peroxidation and mitochondrial iron deposition and ultimately leads to ferroptosis. Our previous study found that milk fat globule epidermal growth factor 8 (MFG-E8) alleviates acinar cell damage during SAP via binding to αvß3/5 integrins. MFG-E8 also seems to mitigate pancreatic fibrosis via inhibiting chaperone-mediated autophagy. AIM: To speculate whether MFG-E8 could also alleviate SAP induced liver injury by restoring the abnormal autophagy flux. METHODS: SAP was induced in mice by 2 hly intraperitoneal injections of 4.0 g/kg L-arginine or 7 hly injections of 50 µg/kg cerulein plus lipopolysaccharide. mfge8-knockout mice were used to study the effect of MFG-E8 deficiency on SAP-induced liver injury. Cilengitide, a specific αvß3/5 integrin inhibitor, was used to investigate the possible mechanism of MFG-E8. RESULTS: The results showed that MFG-E8 deficiency aggravated SAP-induced liver injury in mice, enhanced autophagy flux in hepatocyte, and worsened the degree of ferroptosis. Exogenous MFG-E8 reduced SAP-induced liver injury in a dose-dependent manner. Mechanistically, MFG-E8 mitigated excessive autophagy and inhibited ferroptosis in liver cells. Cilengitide abolished MFG-E8's beneficial effects in SAP-induced liver injury. CONCLUSION: MFG-E8 acts as an endogenous protective mediator in SAP-induced liver injury. MFG-E8 alleviates the excessive autophagy and inhibits ferroptosis in hepatocytes by binding to integrin αVß3/5.

Mechanism of microwave-assisted iron-based catalyst pyrolysis of discarded COVID-19 masks.

Inexpensive iron-based catalysts are the most promising catalysts for microwave pyrolysis of waste plastics, especially a large number of disposable medical masks (DMMs) with biological hazards produced by spread of COVID-19. However, most synthesized iron-based catalysts have very low microwave heating efficiency due to the enrichment state of iron. Here, we prepared FeAlOx catalysts using the microwave heating method and found that the microwave heating efficiency of amorphous iron and hematite is very low, indeed, these materials can hardly initiate pyrolysis at room temperature, which limits the application of iron-based catalysts in microwave pyrolysis. By contrast, a mixture of DMMs and low-valent iron oxides produced by hydrogen reduction at 500 °C can be heated by microwaves to temperatures above 900 °C under the same conditions. When the hydrogen reduction temperature was incerased to 800 °C, the content of metallic iron in the catalyst gradually increased from 0.34 to 21.43%, which enhanced the microwave response ability of the catalyst, and decreased the gas content in the pyrolysis product from 78.91 to 70.93 wt%; corresponding hydrogen yield also decreased from 29.03 to 25.02 mmolH2·g-1DMMs. Moreover, the morphology of the deposited solid carbon gradually changed from multi-walled CNTs to bamboo-like CNTs. This study clarifies the pyrolysis mechanism of microwave-assisted iron catalysts and lays a theoretical foundation for their application in microwave pyrolysis.

Current status of post-traumatic stress disorder among emergency nurses and the influencing factors.

Objective: To gain a better understanding of the current state of traumatic stress experienced by emergency nurses of Grade III Level A hospitals in Jiangsu Province, as well as their coping styles after experiencing such traumatic events. Additionally, this study aims to identify the primary factors that influence the responses of these nurses to traumatic events. Methods: Using a cluster random sampling method, we enrolled 265 nurses working in the emergency departments of five Grade III Level A hospitals in Jiangsu Province. These nurses participated in a questionnaire survey that included inquiries regarding general information, previous traumatic experiences, and a post-traumatic stress disorder self-assessment scale (PCL-C) for emergency department nurses. Results: A total of 290 questionnaires were distributed, resulting in 265 valid questionnaires and an effective rate of 91.38%. These findings indicated that emergency nurses who participated in public health emergencies such as the COVID-19 pandemic (45.66%) and sudden health deterioration and death of patients (43.77%) encountered the most traumatic events. The top two traumatic events that had a moderate or greater impact on emergency nurses were verbal abuse from patients or their family members (39.24%) and verbal or physical threats by patients or their family members (35.09%). The mean PCL-C score of nurses who experienced traumatic events was 33.62 ± 11.37, with a positive rate of 26.04%. Results from the one-way analysis of variance and multiple linear regression analysis demonstrated that the working years, monthly income, and personal health status of emergency nurses were the main factors contributing to post-traumatic stress disorder. Conclusion: Emergency nurses are susceptible to severe traumatic stress following traumatic events, and effective interventions are necessary to address the diverse factors that contribute to their psychological well-being.

Liver transplantation using magnetic anastomosis in pigs.

Magnetic anastomosis substantially shortens the duration of vascular anastomosis. We aimed to apply magnetic anastomosis technology (MAT) to donor liver implantations in pig orthotopic liver transplantation (OLT). Twenty healthy adult pigs were randomly divided into donors and recipients, and major vascular anastomosis was performed using MAT during OLT. Recipient liver and kidney function was measured pre-surgery and 12, 24 and 72 h post-surgery. Vascular anastomoses examinations were performed using ultrasound or angiography weekly post-surgery, and pathological examinations of vascular anastomoses were performed during autopsy after animal euthanasia. All recipients survived 24 h after surgery, which is considered as successful transplantation. Anhepatic duration was only 13 min, and no anastomotic obstruction or stenosis, magnetic displacement and anastomotic angulation, or distortion was found upon postoperative examinations of major liver vasculature. Aspartate aminotransferase, alanine aminotransferase, and total bilirubin serum levels increased considerably postoperatively. The follow-up period for this study was 1 year, and the median survival time of all recipients was 115 d (interquartile range = 11-180 d). The main causes of death were liver failure, immune rejection, infection, and arterial anastomotic bleeding. Moreover, vascular anastomoses healed well with a survival time of more than two weeks. We developed a novel magnetic device to create a fast and safe technique to perform major vascular anastomoses in pig liver transplantations. Additionally, the liver graft implantation using MAT considerably shortened the recipient warm ischemia time, which will reduce the extent of ischemia-reperfusion injury. We conclude that MAT is an effective method for donor liver fast implantation in OLT in pigs.

The m6A reader YTHDF1 attenuates fulminant hepatitis via MFG-E8 translation in an m6A dependent manner.

Background and Aims: N6-methyladenosine (m6A) is the most common post-transcriptional modification of RNA in eukaryotes, which has been demonstrated to play important roles in various biological processes. However, its roles in fulminant hepatitis remain largely unknown. In the current study, YTHDF1 expression was found to be significantly downregulated in the livers among patients, as well as murine models with fulminant hepatitis versus normal controls. Thus, we hypothesized that YTHDF1 protects against fulminant hepatitis and investigated the underlying molecular mechanisms. Methods: Fulminant hepatitis was induced by D-GalN/LPS in conventional YTHDF1 knockout (YTHDF1-/-) mice, hepatocyte-specific YTHDF1 overexpression (AAV8- YTHDF1) mice, and corresponding control mice. Primary hepatocytes were cultured and subjected to LPS insult in vitro. Hepatic histology, cell death, oxidative stress and mitochondrial function were examined to assess liver damage. The molecular mechanisms of YTHDF1 function were explored using multi-omics analysis. Results: Ablation of YTHDF1 exacerbated hepatic apoptosis and reactive oxygen species (ROS) production and increased the number of aberrant mitochondria, while YTHDF1 overexpression resulted in the opposite effects. Multiomics analysis identified MFG-E8 as the direct target of YTHDF1. YTHDF1 augmented the translation of MFG-E8 in an m6A-dependent manner without effect on its mRNA expression, thereby restoring mitochondrial function. Additionally, administration of MFG-E8 almost completely reversed the YTHDF1 deficiency-mediated exacerbation of liver injury. Conclusions: The current study suggested that the m6A reader YTHDF1 alleviates cell death, enhances antioxidant capacity and restores mitochondrial function in fulminant hepatitis by promoting MFG-E8 protein translation in an m6A-dependent manner.

Discarded COVID-19 masks-derived-doped porous carbon for lithium-sulfur batteries.

Despite the high theoretical capacity and energy density of lithium-sulfur (Li-S) batteries, the development of Li-S batteries has been slow due to the poor electrical conductivity and the shuttle effect of the electrode materials, resulting in low sulfur utilization and fast long-term cycling capacity decay. The modified carbon materials are often used as sulfur hosts to significantly improve the cycling performance of the materials, but also bring high-cost issues. Here, the porous carbon materials are synthesized quickly and conveniently by the microwave cross-linking method using discarded medical masks as carbon sources and concentrated sulfuric acid as solvent. However, poor surface and structural properties limit the application of materials. The porous carbon material is modified with p-toluene disulfide and urea as the sulfur and nitrogen sources by the microwave cross-linking method, which not only improves the porosity and specific surface area of the porous carbon material, but also improved the electrical conductivity and interlayer spacing of the material. As synthesized SN-doped porous carbon is employed as the sulfur host, which exhibits a high discharge capacity (1349.3 mAh g-1) at 0.1°C, the S-porous C/S, N-porous C/S, and SN-porous C/S can maintain 78.1, 43.9, and 59.5% of the initial capacity after 500 cycles. The results indicate that the doping of S and N atoms provides sufficient active sites for the chemisorbed lithium polysulfides (LiPSs) to improve the reaction kinetics of the materials.

Porous carbon materials derived from discarded COVID-19 masks via microwave solvothermal method for lithium­sulfur batteries.

With the spread of COVID-19, disposable medical masks (DMMs) have become a significant source of new hazardous solid waste. Their proper disposal is not only beneficial to the safety of biological systems but also useful to achieve considerable economic value. The first step of this study was to investigate the chemical composition of DMMs. It is primarily composed of polypropylene, polyethylene terephthalate and iron, with fibrous polypropylene accounting for approximately 80% of the total weight. Then, DMMs were sulfonated and oxidised by the microwave-driven concentrated sulfuric acid within 8 min based on the fact that the concentrated sulfuric acid exhibits a good microwave absorption capacity. The co-doping of sulfur and oxygen was achieved while improving the thermal stability of DMMs. Subsequently, the self-activation pyrolysis of sulfonated and oxidised DMMs (P-SO@DMMs) was further realized in low-flow-rate argon. The specific surface area of P-SO@DMMs increased from 2.0 to 830.9 m2·g-1. P-SO@DMMs sulfur cathodes have promising electrochemical properties because of their porous structures and the synergistic effect of sulfur and oxygen co-doping. The capacity of the samples irradiated by microwave for 10 min at 0.1, 0.2, 0.5, 1, 2 and 5 C were 1313.6, 1010.9, 816.5, 634.4, 513.4 and 453.1 mAh·g-1, respectively, and after returning to 0.2 C and continuing the cycle for 50 revolutions, maintained 50.5% of the initial capacity. After 400 cycles, its capacity is 38.1% of the initial capacity at 0.5 C. It is slightly higher than the electrochemical performance of the sample treated by microwave for 8 min and significantly higher than the sample treated by 6 min. This work converts structurally complex, biohazardous DMMs into porous carbon with high specific surface area by clean and efficient microwave solvothermal and self-activating pyrolysis, which facilitates the development of carbon based materials at low cost and large scale.

Non-Contact Negative Mood State Detection Using Reliability-Focused Multi-Modal Fusion Model.

Negative mood states include tension, depression, anger, fatigue, and confusion, which represent the weak internal emotions of a human. Negative mood states exert adverse impact on individuals' ability to make rational decisions, which entails the practicable method of negative mood state detection. The most commonly used negative mood state detection methods are based on the psychological scale, which requires additional work and brings inconvenience to the subject in the application scenarios. To overcome this challenge, this paper proposes a novel non-contact negative mood state detection method according to the knowledge of affective computing. The POMS-net model is used to extract temporal-spatial features from visible and infrared thermal videos, and the negative mood state detection is realized using data reliability-focused multi-modal fusion. The proposed method is verified using the HDT-BR dataset collected in the aerospace medicine experiment "Earth-Star II" and the VIRI public dataset. The experimental results on the datasets verify that our method outperforms the comparison methods.