Structural and Thermodynamics Studies on Polyaminophosphonate Ligands for Uranyl Decorporation.

The development of actinide decorporation agents with high complexation affinity, high tissue specificity, and low biological toxicity is of vital importance for the sustained and healthy development of nuclear energy. After accidental actinide intake, sequestration by chelation therapy to reduce acute damage is considered as the most effective method. In this work, a series of bis- and tetra-phosphonated pyridine ligands have been designed, synthesized, and characterized for uranyl (UO22+) decorporation. Owing to the absorption of the ligand and the luminescence of the uranyl ion, UV-vis spectroscopy and time-resolved laser-induced fluorescence spectroscopy (TRLFS) were used to probe in situ complexation and structure variation of the complexes formed by the ligands with uranyl. Density functional theory (DFT) calculations and X-ray absorption fine structure (XAFS) spectroscopy on uranyl-ligand complexes revealed the coordination geometry around the uranyl center at pH 3 and 7.4. High affinity constants (log K ∼17) toward the uranyl ion were determined by displacement titration. A preliminary in vitro chelation study proves that bis-phosphonated pyridine ligands can remove uranium from calmodulin (CaM) at a low dose and in the short term, which supports further uranyl decorporation applications of these ligands.

Assignment of complex species by affinity capillary electrophoresis: The case of Th(IV)-desferrioxamine B.

The electrophoretic mobility change of desferrioxamine B (DFO) was monitored by UV absorption spectrophotometry upon increasing the thorium(IV) concentration in the background electrolyte at two acidities ([HClO4 ]Tot = 0.0316 and 0.0100 M). These data enabled to assess the speciation model and to determine the equilibrium constant of [Th(DFO)H2 ]3+ at fixed ionic strength (I = 0.1 M (H,Na)ClO4 ). Affinity capillary electrophoresis (ACE) turned out to be most helpful in identifying the complexed species by ascertaining its charge and protonation state. The assignment of the correct stoichiometry relied on the reliable estimation of the electrophoretic mobility by assuming similar hydrodynamic radii for (DFO)H4+ and the chelate. The value of the apparent equilibrium constant (log ß112 = 38.7 ± 0.4) obtained by ACE compares favorably well with those reported in the literature for thorium and a range of other metal ions, according to a linear free-energy relationship. This method is useful for studying metal-ligand binding equilibria and provides valuable information for further modelling the behavior of tetravalent actinides under environmental conditions. Structural information about the prevalent solution species in acidic conditions was gained by DFT calculations, confirming the bishydroxamato coordination mode of Th4+ by the diprotonated ligand.

Cyclic Phosphopeptides to Rationalize the Role of Phosphoamino Acids in Uranyl Binding to Biological Targets.

The specific molecular interactions responsible for uranium toxicity are not yet understood. The uranyl binding sites in high-affinity target proteins have not been identified yet and the involvement of phosphoamino acids is still an important question. Short cyclic peptide sequences, with three glutamic acids and one phosphoamino acid, are used as simple models to mimic metal binding sites in phosphoproteins and to help understand the mechanisms involved in uranium toxicity. A combination of peptide design and synthesis, analytical chemistry, extended X-ray absorption fine structure (EXAFS) spectroscopy, and DFT calculations demonstrates the involvement of the phosphate group in the uranyl coordination sphere together with the three carboxylates of the glutamate moieties. The affinity constants measured with a reliable analytical competitive approach at physiological pH are significantly enhanced owing to the presence of the phosphorous moiety. These findings corroborate the importance of phosphoamino acids in uranyl binding in proteins and the relevance of considering phosphoproteins as potential uranyl targets in vivo.

Structural Environment and Stability of the Complexes Formed Between Calmodulin and Actinyl Ions.

Because of their presence in the nuclear fuel cycle, neptunium and uranium are two actinides of main interest in case of internal contamination. Complexation of U(VI) and Np(V) by the target protein calmodulin (CaM(WT)) was therefore studied herein. Both actinides have two axial oxygen atoms, which, charge aside, makes them very similar structurally wise. This work combines spectroscopy and theoretical density functional theory (DFT) calculations. Structural characterization was performed by extended X-ray absorption fine structure (EXAFS) at the L(III)-edge for each studied actinide. Models for the binding site of the protein were developed and then refined by using DFT to fit the obtained experimental EXAFS data. The effect of hydrolysis was also considered for both actinides (the uranyl experiment was performed at pH 3 and 6, while the neptunyl experiment was conducted at pH 7 and 9). The effect of the pH variation was apparent on the coordination sphere of the uranyl complexes, while the neptunyl complex characteristics remained stable under both studied conditions. The DFT calculations showed that at near physiological pH the complex formed by CaM(WT) with the neptunium ion is more stable than the one formed with uranyl.

Actinide(IV) Deposits on Bone: Potential Role of the Osteopontin-Thorium Complex.

In case of a nuclear event, contamination (broad or limited) of the population or of specific workers might occur. In such a senario, the fate of actinide contaminants may be of first concern, in particular with regard to human target organs like the skeleton. To improve our understanding of the toxicological processes that might take place, a mechanistic approach is necessary. For instance, ∼50% of Pu(IV) is known from biokinetic data to accumulate in bone, but the underlining mechanisms are almost unknown. In this context, and to obtain a better description of the toxicological mechanisms associated with actinides(IV), we have undertaken the investigation, on a molecular scale, of the interaction of thorium(IV) with osteopontin (OPN) a hyperphosphorylated protein involved in bone turnover. Thorium is taken here as a simple model for actinide(IV) chemistry. In addition, we have selected a phosphorylated hexapeptide (His-pSer-Asp-Glu-pSer-Asp-Glu-Val) that is representative of the peptidic sequence involved in the bone interaction. For both the protein and the biomimetic peptide, we have determined the local environment of Th(IV) within the bioactinidic complex, combining isothermal titration calorimetry, attenuated total reflectance Fourier transform infrared spectroscopy, theoretical calculations with density functional theory, and extended X-ray absorption fine structure spectroscopy at the Th LIII edge. The results demonstrate a predominance of interaction of metal with the phosphate groups and confirmed the previous physiological studies that have highlighted a high affinity of Th(IV) for the bone matrix. Data are further compared with those of the uranyl case, representing the actinyl(V) and actinyl(VI) species. Last, our approach shows the importance of developing simplified systems [Th(IV)-peptide] that can serve as models for more biologically relevant systems.

Thermodynamic and Structural Investigation of Synthetic Actinide-Peptide Scaffolds.

The complexation of uranium and europium, in oxidation states +VI and +III, respectively, was investigated with pertinent bio-inorganic systems. Three aspartate-rich pentapeptides with different structural properties were selected for study to rationalize the structure-affinity relationships. Thermodynamic results, crosschecked by both isothermal titration calorimetry and time-resolved laser fluorescence spectroscopy, showed different affinity depending on the peptide for both Eu(III) and U(VI). The thermodynamic aspects were correlated to structural predictions, which were acquired by density functional theory quantum chemical calculations and from IR and extended X-ray absorption fine structure experiments. The combination of these microscopic properties revealed that carbonyl-metal interactions affected the entropy in the case of europium, while the larger uranyl cation was mostly affected by preorganization and steric effects, so that the affinity was enhanced through enthalpy. The approach described here revealed various microscopic aspects governing peptide actinide affinity. Highlighting these mechanisms should certainly contribute to the rational synthesis of higher affinity biomimetic aspartic ligands.

Osteopontin: a uranium phosphorylated binding-site characterization.

Herein, we describe the structural investigation of one possible uranyl binding site inside a nonstructured protein. This approach couples spectroscopy, thermodynamics, and theoretical calculations (DFT) and studies the interaction of uranyl ions with a phosphopeptide, thus mimicking a possible osteopontin (OPN) hydroxyapatite growth-inhibition site. Although thermodynamical aspects were investigated by using time-resolved laser fluorescence spectroscopy (TRLFS) and isothermal titration calorimetry (ITC), structural characterization was performed by extended X-ray absorption fine structure (EXAFS) at the U LIII -edge combined with attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. From the vibrational and fluorescence spectra, several structural models of a UO2 (2+) /peptide complex were developed and subsequently refined by using theoretical calculations to fit the experimental EXAFS obtained. The structural effect of the pH value was also considered under acidic to moderately acidic conditions (pH 1.5-5.5). Most importantly, the uranyl/peptide coordination environment was similar to that of the native protein.

Thermodynamic study of the complexation of protactinium(V) with diethylenetriaminepentaacetic acid.

The complex formation of protactinium(V) with DTPA was studied at different temperatures (25-50 °C) and ionic strengths (0.1-1 M) with the element at tracer scale. Irrespective of the temperature and ionic strength studied, only one neutral complex with (1:1) stoichiometry was identified from solvent extraction and capillary electrophoresis coupled to ICP-MS (CE-ICP-MS) experiments. Density Functional Theory (DFT) calculations revealed that two complexes can be considered: Pa(DTPA) and PaO(H2DTPA). The associated formation constants were determined from solvent extraction data at different ionic strengths and temperatures and then extrapolated to zero ionic strength by SIT methodology. These constants are valid, regardless of complex form, Pa(DTPA) or PaO(H2DTPA). The standard thermodynamic data determined with these extrapolated constants revealed a very stable complex formed energetically by an endothermic contribution which is counter balanced by a strong entropic contribution. Both, the positive enthalpy and entropy energy terms suggest the formation of an inner sphere complex.

Car-Parrinello molecular dynamics study of the uranyl behaviour at the gibbsite/water interface.

The uranyl cation UO(2)(2+) adsorption on the basal face of gibbsite is studied via Car-Parrinello molecular dynamics. In a first step, we study the water sorption on a gibbsite surface. Three different sorption modes are observed and their hydrogen bond patterns are, respectively, characterized. Then we investigate the sorption properties of an uranyl cation, in the presence of water. In order to take into account the protonation state of the (001) gibbsite face, both a neutral (001) face and a locally deprotonated (001) face are modeled. In the first case, three adsorbed uranyl complexes (1 outer sphere and 2 inner spheres) with similar stabilities are identified. In the second case, when the gibbsite face is locally deprotonated, two adsorbed complexes (1 inner sphere and 1 outer one) are characterized. The inner sphere complex appears to be the most strongly linked to the gibbsite face.

Uranyl ion interaction at the water/NiO(100) interface: a predictive investigation by first-principles molecular dynamic simulations.

The behavior of the UO(2)(2+) uranyl ion at the water/NiO(100) interface was investigated for the first time using Born-Oppenheimer molecular dynamic simulations with the spin polarized DFT + U extension. A water/NiO(100) interface model was first optimized on a defect-free five layers slab thickness, proposed as a reliable surface model, with an explicit treatment of the solvent. Water molecules are adsorbed with a well-defined structure in a thickness of about 4 Å above the surface. The first layer, adsorbed on nickel atoms, remains mainly in molecular form but can partly dissociate at 293 K. Considering low acidic conditions, a bidentate uranyl ion complex was characterized on two surface oxygen species (arising from water molecules adsorption on nickel atoms) with d(U-O(adsorption))=2.39 Å. This complex is stable at 293 K due to iono-covalent bonds with an estimated charge transfer of 0.58 electron from the surface to the uranyl ion.

Ions in solutions: Determining their polarizabilities from first-principles.

Dipole polarizabilities of a series of ions in aqueous solutions are computed from first-principles. The procedure is based on the study of the linear response of the maximally localized Wannier functions to an applied external field, within density functional theory. For most monoatomic cations (Li(+), Na(+), K(+), Rb(+), Mg(2+), Ca(2+) and Sr(2+)) the computed polarizabilities are the same as in the gas phase. For Cs(+) and a series of anions (F(-), Cl(-), Br(-) and I(-)), environmental effects are observed, which reduce the polarizabilities in aqueous solutions with respect to their gas phase values. The polarizabilities of H((aq)) (+), OH((aq)) (-) have also been determined along an ab initio molecular dynamics simulation. We observe that the polarizability of a molecule instantaneously switches upon proton transfer events. Finally, we also computed the polarizability tensor in the case of a strongly anisotropic molecular ion, UO(2) (2+). The results of these calculations will be useful in building interaction potentials that include polarization effects.

Thermodynamical and structural study of protactinium(V) oxalate complexes in solution.

The complexation of protactinium(V) by oxalate was studied by X-ray absorption spectroscopy (XAS), density functional theory (DFT) calculations, capillary electrophoresis coupled with inductively coupled plasma mass spectrometry (CE-ICP-MS) and solvent extraction. XAS measurements showed unambiguously the presence of a short single oxo-bond, and the deduced structure agrees with theoretical calculations. CE-ICP-MS results indicated the formation of a highly charged anionic complex. The formation constants of PaO(C(2)O(4))(+), PaO(C(2)O(4))(2)(-), and PaO(C(2)O(4))(3)(3-) were determined from solvent extraction data by using protactinium at tracer scale (C(Pa) < 10(-10) M). Complexation reactions of Pa(V) with oxalate were found to be exothermic with relatively high positive entropic variation.

Periodic density functional theory investigation of the uranyl ion sorption on three mineral surfaces: a comparative study.

Canister integrity and radionuclides retention is of prime importance for assessing the long term safety of nuclear waste stored in engineered geologic depositories. A comparative investigation of the interaction of uranyl ion with three different mineral surfaces has thus been undertaken in order to point out the influence of surface composition on the adsorption mechanism(s). Periodic DFT calculations using plane waves basis sets with the GGA formalism were performed on the TiO(2)(110), Al(OH)(3)(001) and Ni(111) surfaces. This study has clearly shown that three parameters play an important role in the uranyl adsorption mechanism: the solvent (H(2)O) distribution at the interface, the nature of the adsorption site and finally, the surface atoms' protonation state.

Is hydroxypyridonate 3,4,3-LI(1,2-HOPO) a good competitor of fetuin for uranyl metabolism?

Uranium is widespread in the environment, resulting both from natural occurrences and anthropogenic activities. Its toxicity is mainly chemical rather than radiological. In the blood it is transported as uranyl UO22+ cation and forms complexes with small ligands like carbonates and with some proteins. From there it reaches the skeleton, its main target organ for accumulation. Fetuin is a serum protein involved in biomineralization processes, and it was demonstrated to be the main UO22+-binder in vitro. Fetuin's life cycle ends in bone. It is thus suspected to be a key protagonist of U accumulation in this organ. Up to now, there has been no effective treatment for the removal of U from the body and studies devoted to the interactions involving chelating agents with both UO22+ and its protein targets are lacking. The present work aims at studying the potential role of 3,4,3-LI(1,2-HOPO) as a promising chelating agent in competition with fetuin. The apparent affinity constant of 3,4,3-LI(1,2-HOPO) was first determined, giving evidence for its very high affinity similar to that of fetuin. Chromatography experiments, aimed at identifying the complexes formed and quantifying their UO22+ content, and spectroscopic structural investigations (XAS) were carried out, demonstrating that 3,4,3-LI(1,2-HOPO) inhibits/limits the formation of fetuin-uranyl complexes under stoichiometric conditions. But surprisingly, possible ternary complexes stable enough to remain present after the chromatographic process were identified under sub-stoichiometric conditions of HOPO versus fetuin. These results contribute to the understanding of the mechanisms accounting for U residual accumulation despite chelation therapy after internal contamination.

Theoretical investigation of the uranyl ion sorption on the rutile TiO2(110) face.

Canister integrity and radionuclide retention is of first importance for assessing the long-term safety of nuclear waste stored in engineered geologic depositories. Uranyl ion sorption on the TiO(2) rutile (110) face is investigated using periodic density functional theory (DFT) calculations. From experimental observations, only two uranyl surface complexes are observed and characterized. When the pH increases (from 1.5 to 4.5), the relative ratios of these two surface complexes are modified. From a crystallographic point of view, three sorption sites can be considered and have been studied with different protonation states of the surface to account for very acidic and low acidic conditions. The two surface complexes experimentally observed were calculated as the most stable ones, while the evolution of their sorption energies agrees with experimental data.

Uranyl interaction with the hydrated (001) basal face of gibbsite: a combined theoretical and spectroscopic study.

The sorption of uranyl cations and water molecules on the basal (001) face of gibbsite was studied by combining vibrational and fluorescence spectroscopies together with density functional theory (DFT) computations. Both the calculated and experimental values of O-H bond lengths for the gibbsite bulk are in good agreement. In the second part, water sorption with this surface was studied to take into account the influence of hydration with respect to the uranyl adsorption. The computed water configurations agreed with previously published molecular dynamics studies. The uranyl adsorption in acidic media was followed by time-resolved laser-induced fluorescence spectroscopy and Raman spectrometry measurements. The existence of only one kind of adsorption site for the uranyl cation was then indicated in good agreement with the DFT calculations. The computation of the uranyl adsorption has been performed by means of a bidentate interaction with two surface oxygen atoms. The optimized structures displayed strong hydrogen bonds between the surface and the -yl oxygen of uranyl. The uranium-surface bond strength depends on the protonation state of the surface oxygen atoms. The calculated U-O(surface) bond lengths range between 2.1-2.2 and 2.6-2.7 A for the nonprotonated and protonated surface O atoms, respectively.

Towards the development of chitosan nanoparticles for plutonium pulmonary decorporation.

Since the 1940s, great amounts of Plutonium (Pu) have been produced for both military and civil purposes. Until now, the standard therapy for decorporation following inhalation has been the intravenous injection of diethylenetriaminepentaacetic acid ligand (Ca-DTPA form). This method offers a strong complexing constant for Pu(iv) but has poor chemical specificity, therefore its efficacy is limited to actinides present in the blood. Consequently, there is no decorporation treatment currently available which efficiently removes the intracellular Pu(iv) trapped in the pulmonary macrophages. Our research shows that a nanoparticle approach could be of particular interest due to large contact area and ability to target the retention compartments of the lungs. In this study, we have focused on the inhalation process involving forms of Pu(iv) with poor solubility. We explored the design of biocompatible nanoparticles able to target the macrophages in the lung alveoli and to chelate the forms of Pu(iv) with poor solubility. Nanoparticle formation was achieved through an ionic cross-linking concept using a polycationic polymer and an anionic chelate linker. We chose N-trimethyl chitosan, for its biocompatibility, as the polycationic polymer base of the nanoparticle and the phosphonic analogue of DTPA, diethylenetriamine-pentamethylenephosphonic acid (DTPMP) as the anionic chelating linker in forming NPs TMC-DTPMP. The synthesis and physico-chemical characterization of these NPs are presented. Secondly, the complexation mechanisms of TMC-DTPMP NPs with Thorium (Th(iv)) are discussed in terms of efficiency and structure. The Extended X-Ray Absorption Fine Structure (EXAFS) of the TMC-DTPMP complex with Th(iv) as well as Pu(iv) are defined and completed with DFT calculations to further delineate the plutonium coordination sphere after complexation. Finally, preliminary cytotoxicity tests onto macrophages were assayed.

Activation energies for oxygen reduction on platinum alloys: theory and experiment.

A combined theoretical and experimental analysis of the electrode potential dependencies of activation energies is presented for the first step in oxygen reduction over platinum and platinum alloy catalysts in both polycrystalline and carbon supported form. Tafel data for several of the catalysts are used to predict potential-dependent activation energies for oxygen reduction over the 0.6-0.9 V range in strong and weak acid. Comparisons with the theoretical curve show good agreement above 0.8 V, suggesting a fairly constant preexponential factor. Arrhenius determinations of activation energies over the 0.7-0.9 V range yield little trend for weak acid, possibly because of the larger uncertainties in the Arrhenius fits, but the strong acid results have smaller uncertainties and for them the measured activation energies trend up with potential.

Dissociative Adsorption of Hydrogen and Oxygen on Palladium Clusters: A Comparison with the (111) Infinite Surface.

We report a density-functional study of some properties of the dissociative interaction of hydrogen and oxygen molecules on small palladium clusters (n = 5, 7, and 10). The calculated physisorption and chemisorption energies are compared with those of the infinite (111) palladium surface. First, adsorption of atomic hydrogen and oxygen is investigated on the Pd5, Pd7, and Pd10 clusters. Second, the interaction between H2 (O2) and the small Pd5 cluster is examined and compared to the process occurring on an infinite (111) surface. Finally, the simultaneous adsorption of two hydrogen (oxygen) atoms is analyzed in detail. As shown in a previous work, the binding energy of the first hydrogen (oxygen) atom does not depend significantly on the cluster size, and small two-layer clusters (n ≤ 10) can be used to determine with accuracy the interaction of atomic adsorbates with an infinite (111) palladium surface. In this study, we show that the dissociative chemisorption of H2 and more especially of O2 on a small palladium cluster may lead to erroneous binding energy: the cluster's size may prevent an accurate description of the adsorbate-adsorbate interaction as a function of their distance. It is demonstrated that a good choice of both the size and the shape of the cluster is preponderant for a good description of the dissociative adsorption of H2 and O2 on an infinite (111) surface.

Periodic density functional theory investigation of the uranyl ion sorption on the TiO2 rutile (110) face.

Periodic density functional theory calculations have been performed in order to study the uranyl ion sorption on the TiO2 rutile (110) face. From experimental measurements, two uranyl surface complexes have been observed and the two corresponding sorption sites have been identified. However, from a crystallographic point of view, three different sorption sites can be considered on this face. The corresponding three surface bidentate complexes were modeled and optimized, and their relative energies were calculated. Only 5 kJ/mol separates the two most stable structures, which correspond to the experimental ones. The third surface complex is nearly 10 kJ/mol less stable, in agreement with the fact that it was not observed experimentally.