RESUMO
Colorectal cancer is still a major global health concern, and early detection and accurate biomarker analyses are critical to its successful management. This paper describes the design and testing of a new biosensor based on a graphene oxide (GO) nanocomposite for the exact measurement of carcinoembryonic antigen (CEA), a well-known biomarker for colorectal cancer. The current study attempted to create a highly sensitive immunosensor for sensitive measurement of CEA based on a polypropylene-imine-dendrimer (PPI) and GO nanocomposite on GCE (PPI/GO/GCE). The PPI/GO nanocomposite served as an appropriate biocompatible nanostructure with a large surface area for immobilizing carcinoembryonic antigen (anti-CEA) and bovine serum albumin (BSA) molecules (BSA/anti-CEA/PPI/GO/GCE), thereby promoting the selectivity of electrochemical immunosensors, according to structural and electrochemical studies. Results showed that the BSA/anti-CEA/PPI/GO/GCE as a selective, sensitive, and stable immunosensor revealed a wide linear response from 0.001 to 2000 ng/mL, and a limit of detection of 0.3 pg/mL, which indicated comparable or better performance towards the CEA immunosensors in recent reports in the literature. This was due to the synergetic effect of the GO nanosheets and PPI with porous structure and more conductivity. Analytical results showed values of RSD (4.49%-5.04%) and recovery (90.00%-99.98%) are suitable for effective and accurate practical assessments in CEA in clinical samples. The capacity of the BSA/anti-CEA/PPI/GO/GCE to determine CEA in human blood was studied.
Assuntos
Técnicas Biossensoriais , Neoplasias Colorretais , Nanopartículas Metálicas , Nanocompostos , Humanos , Biomarcadores Tumorais , Antígeno Carcinoembrionário/análise , Técnicas Biossensoriais/métodos , Ouro/química , Imunoensaio/métodos , Nanocompostos/química , Limite de Detecção , Nanopartículas Metálicas/químicaRESUMO
p_Aminophenol, namely 4-aminophenol (4-AP), is an aromatic compound including hydroxyl and amino groups contiguous together on the benzene ring, which are suitable chemically reactive, amphoteric, and alleviating agents in nature. Amino phenols are appropriate precursors for synthesizing oxazoles and oxazines. However, since the toxicity of aniline and phenol can harm human and herbal organs, it is essential to improve a reliable technique for the determination of even a trace amount of amino phenols, as well as elimination or (bio)degradation/photodegradation of it to protect both the environment and people's health. For this purpose, various analytical methods have been suggested up till now, including spectrophotometry, liquid chromatography, spectrofluorometric and capillary electrophoresis, etc. However, some drawbacks such as the requirement of complex instruments, high costs, not being portable, slow response time, low sensitivity, etc. prevent them to be employed in a wide range and swift in-situ applications. In this regard, besides the efforts such as (bio)degradation/photodegradation or removal of 4-AP pollutants from real samples, electroanalytical techniques have become a promising alternative for monitoring them with high sensitivity. In this review, it was aimed to emphasize and summarize the recent advances, challenges, and opportunities for removal, degradation, and electrochemical sensing 4-AP in real samples. Electroanalytical monitoring of amino phenols was reviewed in detail and explored the various types of electrochemical sensors applied for detecting and monitoring in real samples. Furthermore, the various technique of removal and degradation of 4-AP in industrial and urban wastes were also deliberated. Moreover, deep criticism of multifunctional nanomaterials to be utilized as a catalyst, adsorbent/biosorbent, and electroactive material for the fabrication of electrochemical sensors was covered along with their unique properties. Future perspectives and conclusions were also criticized to pave the way for further studies in the field of application of up-and-coming nanostructures in environmental applications.
Assuntos
Poluentes Ambientais , Nanoestruturas , Humanos , Aminofenóis/análise , Poluentes Ambientais/análise , Fenóis/análise , Nanoestruturas/químicaRESUMO
Cancer monitoring plays a critical role in improving patient outcomes by providing early detection, personalized treatment options, and treatment response tracking. Carbon-based electrochemical biosensors have emerged in recent years as a revolutionary technology with the potential to revolutionize cancer monitoring. These sensors are useful for clinical applications because of their high sensitivity, selectivity, rapid response, and compatibility with miniaturized equipment. This review paper gives an in-depth look at the latest developments and the possibilities of carbon-based electrochemical sensors in cancer surveillance. The essential principles of carbon-based electrochemical sensors are discussed, including their structure, operating mechanisms, and critical qualities that make them suited for cancer surveillance. Furthermore, we investigate their applicability in detecting specific cancer biomarkers, evaluating therapy responses, and detecting cancer recurrence early. Additionally, a comparison of carbon-based electrochemical sensor performance measures, including sensitivity, selectivity, accuracy, and limit of detection, is presented in contrast to existing monitoring methods and upcoming technologies. Finally, we discuss prospective tactics, future initiatives, and commercialization opportunities for improving the capabilities of these sensors and integrating them into normal clinical practice. The review highlights the potential impact of carbon-based electrochemical sensors on cancer diagnosis, treatment, and patient outcomes, as well as the importance of ongoing research, collaboration, and validation studies to fully realize their potential in revolutionizing cancer monitoring.
Assuntos
Técnicas Biossensoriais , Neoplasias , Humanos , Carbono , Estudos Prospectivos , Técnicas Eletroquímicas/métodos , Técnicas Biossensoriais/métodos , Neoplasias/diagnósticoRESUMO
In the present study, a novel 1-butyl-3-methylimidazolium bromide (BmImBr) impregnated chitosan beads were prepared and characterized using different methods, including XRD, FT-IR, EDX, SEM and BET. The FTIR analysis revealed that the BmImBr was successfully conjugated with the chitosan in the beads structure. The prepared beads were used as an efficient sorbent for the fast removal of methylene blue, as cationic dye model, from aqueous solution, whereas just 25 min was required to reach 86% removal efficiency. The increasing of BmImBr amount improved the adsorption performance of prepared beads. Also, it was found that the dye can be higher adsorbed on the beads surface by increasing the sorbent dosage and pH of solution, while the optimum dosage and pH were obtained 3 mg/L and 11, respectively. The kinetic study showed that the MB adsorption onto the CS-BmImBr beads follows the pseudo-fist order model and the intrinsic penetration controls the adsorption process. The properties of prepared chitosan- BmImBr IL conjugation confirmed that it can be exploited as an efficient adsorbent in the wastewater treatment.
Assuntos
Quitosana , Nanoestruturas , Poluentes Químicos da Água , Adsorção , Hidrogéis , Concentração de Íons de Hidrogênio , Imidazóis , Cinética , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Pendimethalin (PND) is a herbicide that is regarded to be possibly carcinogenic to humans and toxic to the environment. Herein, we fabricated a highly sensitive DNA biosensor based on ZIF-8/Co/rGO/C3N4 nanohybrid modification of a screen-printed carbon electrode (SPCE) to monitor PND in real samples. The layer-by-layer fabrication pathway was conducted to construct ZIF-8/Co/rGO/C3N4/ds-DNA/SPCE biosensor. The physicochemical characterization techniques confirmed the successful synthesis of ZIF-8/Co/rGO/C3N4 hybrid nanocomposite, as well as the appropriate modification of the SPCE surface. The utilization of ZIF-8/Co/rGO/C3N4 nanohybrid as a modifier was analyzed using. The electrochemical impedance spectroscopy results showed that the modified SPCE exhibited significantly lowered charge transfer resistance due to the enhancement of its electrical conductivity and facilitation of the transfer of charged particles. The proposed biosensor successfully quantified PND in a wide concentration range of 0.01-35 µM, with a limit of detection (LOD) value of 8.0 nM. The PND monitoring capability of the fabricated biosensor in real samples including rice, wheat, tap, and river water samples was verified with a recovery range of 98.2-105.6%. Moreover, to predict the interaction sites of PND herbicide with DNA, the molecular docking study was performed between the PND molecule and two sequence DNA fragments and confirmed the experimental findings. This research sets the stage for developing highly sensitive DNA biosensors that will be used to monitor and quantify toxic herbicides in real samples by fusing the advantages of nanohybrid structures with crucial knowledge from a molecular docking investigation.
Assuntos
Técnicas Biossensoriais , Grafite , Herbicidas , Humanos , Carbono , Simulação de Acoplamento Molecular , Técnicas Eletroquímicas/métodos , DNA/química , Grafite/química , EletrodosRESUMO
Drug efficiency can be considerably boosted while adverse effects can be reduced by precisely monitoring the concentration of anti-cancer drugs. Thus, one of the most important parameters for human health is the monitoring and detection of anticancer drugs during chemotherapy treatment. Herein, a glassy carbon electrode (GCE) was modified by Pt- and Pd-incorporated ZnO nanoparticles-decorated single-wall carbon nanotubes (Pt-Pd-ZnO/SWCNTs) nanocomposites, and ds-DNA (Calf Thymus) that was a biological recognition element, and it was aimed to be utilized as an ultrasensitive and effective electroanalytical biosensor for idarubicin (IDR) monitoring. Various physicochemical characterization techniques including transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) with energy-dispersive X-ray spectroscopy (EDS) were used to investigate the morphology and structure of the Pt-Pd-ZnO/SWCNTs nanocomposite, which was produced via straightforward chemical precipitation combined with the one-pot method. The layer-by-layer modification technique was implemented to fabricate the ds-DNA/Pt-Pd-ZnO/SWCNTs/GCE to be further utilized as a voltammetric sensor for sensitive monitoring of idarubicin in biological fluids and pharmaceutical substances. The electroanalytical method implemented to detect idarubicin was based to detect the ds-DNA's guanine base signal on the surface of the modified electrode in the absence and presence of the anticancer drug. The results explicated that the developed biosensor performed well in determining idarubicin in concentrations ranging from 1.0 nM to 65 µM, with a detection limit of 0.8 nM. The idarubicin detection ability of the modified electrode in real samples was evaluated, and the recovery data was acquired in the range of 98.0% and 104.75%. In the final step, the preferential intercalative binding mode of idarubicin drug with ds-DNA was approved by molecular docking study. This study paves the way for engineering highly sensitive DNA biosensors to be employed in the monitoring of anticancer drugs by combining the benefits of nanocomposites and valuable information of a molecular docking study.
Assuntos
Técnicas Biossensoriais , Nanocompostos , Nanotubos de Carbono , DNA , Técnicas Eletroquímicas , Eletrodos , Guanina , Humanos , Idarubicina , Limite de Detecção , Simulação de Acoplamento MolecularRESUMO
Synthetic azo dyes are widely used in a variety of industries, but many of them pose a risk to human health, particularly when consumed in large quantities. As a result, their existence in products should be closely monitored. D&C red 33 and Patent Blue V are mostly used in cosmetics, especially in toothpaste and mouthwashes. A novel carbon paste electrode modified with ZIF-8/g-C3N4/Co nanocomposite and 1-methyl-3-butylimidazolium bromide as an ionic liquid was employed as a highly sensitive reproducible electrochemical sensor for the simultaneous determination of these common dyes. ZIF structure has unique properties such as high surface area, suitable conductivity, and excellent porosity. The electrochemical behavior of the suggested electrode was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV), and electrochemical impedance spectroscopy (EIS). To characterize the synthesized nanocomposites, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were applied to investigate the structure of nanocomposites. Under the optimized conditions, the modified sensor offered a wide linear concentration range 0.08-10 µM (R2 = 0.9906) and 10-900 µM (R2 = 0.9932) with a low limit of detection of 0.034 µM. The value of diffusion coefficient (D), and the electron transfer coefficient (α) was calculated to be 310 × 10-5, and 0.9 respectively. This technique offered a successful performance for the determination of target analyte in the real samples with acceptable results between 96% and 107%.
RESUMO
Azo dyes as widely applied food colorants are popular for their stability and affordability. On the other hand, many of these dyes can have harmful impacts on living organs, which underscores the need to control the content of this group of dyes in food. Among the various analytical approaches for detecting the azo dyes, special attention has been paid to electro-analytical techniques for reasons such as admirable sensitivity, excellent selectivity, reproducibility, miniaturization, green nature, low cost, less time to prepare and detect of specimens and the ability to modify the electrode. Satisfactory results have been obtained so far for carbon-based nanomaterials in the fabrication of electrochemical sensing systems in detecting the levels of these materials in various specimens. The purpose of this review article is to investigate carbon nanomaterial-supported techniques for electrochemical sensing systems on the analysis of azo dyes in food samples in terms of carbon nanomaterials used, like carbon nanotubes (CNT) and graphene (Gr).
Assuntos
Grafite , Nanoestruturas , Nanotubos de Carbono , Compostos Azo , Corantes , Técnicas Eletroquímicas/métodos , Grafite/química , Nanoestruturas/química , Nanotubos de Carbono/química , Reprodutibilidade dos TestesRESUMO
The effectual utilization of heterogeneous catalysts from nano sources through chemical moderation for the α-aminomethylcarboxylation of alkenes with carbon dioxide and amines is an attractive area to study. Dendritic fibrous nanosilica (DFNS) is a cost-effective, resistant, plenteous, and reproducible source with dandelion-like fibrous anatomy. The present paper is a report on an easy method to provide a family of new DFNS-supported dendritic imidazolium IL/Ru(ii) heterogeneous catalysts DFNS/IL/Ru (1-3) with high ionic density from DFNS. A positive dendritic effect was perceived in the chemical stabilization performance of CO2. DFNS/IL/Ru(ii) was appropriately identified by UV-vis spectroscopy, XPS, SEM, TEM, FT-IR spectroscopy, and TGA. It was discovered that DFNS/IL/Ru(ii) has high catalytic activity for the synthesis of quinoline-2-one through the annulation of ortho-heteroaryl anilines and CO2. DFNS/IL/Ru (3) could be reutilized ten continuous times with no notable reduction in the catalytic activity. Notably, the coveted quinoline-2-one was prepared on a multi-gram scale by deploying DFNS/IL/Ru (3) as a green heterogeneous catalyst. Owing to the attendance of the zwitterionic liquid functional groups on the exterior layer of the bio-based DFNS/IL/Ru (3) catalyst, DFNS/IL/Ru (3) expressed the highest catalytic activity. This approach provides highly functional γ-amino acids in proper yields with great selective power. This paper announces the first nanocatalyst for this transformation, comprising the DFNS-supported Ru N-heterocyclic carbine complex.
RESUMO
[This corrects the article DOI: 10.1039/D0RA10729H.].
RESUMO
Organophosphorus insecticide fenamiphos (FEN) is utilized to control the detrimental nematode pests. In this report, a novel molecular imprinted electrochemical sensor for insecticide FEN detection was prepared. The molecular imprinted sensor was prepared based on Co3O4 nanowire and core-shell Co3O4@MOF-74 nanocomposite. Firstly, hydrothermal method followed by thermal annealing was applied for the preparation of Co3O4 nanowire. Then, solvothermal technique was used in no presence of metal salts to prepare core-shell Co3O4@MOF-74 nanocomposite. In addition, several solvothermal cycles were tried to optimally adjust the reaction efficiency. After the modification of the clean carbon electrode surfaces with Co3O4@MOF-74 nanocomposites, the molecular imprinted electrodes based on Co3O4@MOF-74 nanocomposites were prepared in presence of 100.0 mM pyrrole as monomer and 25.0 mM FEN as analyte molecule between +0.30 V and +1.50 V by cyclic voltammetry (CV). The prepared molecularly imprinted sensor based on Co3O4 nanowire and core-shell Co3O4@MOF-74 nanocomposite was characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), x-ray diffraction (XRD) method, x-ray photoelectron spectroscopy (XPS), fourier transform infrared spectroscopy (FTIR), electrochemical impedance spectroscopy (EIS) and CV. The quantification limit (LOQ) and the detection limit (LOD) were obtained as 1.0 × 10-11 M and 3.0 × 10-12 M, respectively, by using the developed sensor. Hence, the developed molecularly imprinting electrochemical sensor having high selectivity, stability and reproducibility was presented in this study for insecticide FEN detection.
RESUMO
In the present study, gold nanoparticles were locally well-decorated on the surface of TiO2 using the tungstophosphoric acid (HPW), as UV-switchable reducing intermediate linkers. The prepared Au NPs/HPW/TiO2 nanostructure was characterized using FTIR, XRD, EDS, SEM and TEM, which confirmed the successful attachment of quasi-spherical Au NPs in the range of 20-30 nm on the surface of HPW modified TiO2. Also, the FTIR results show that the Au NPs were binded to TiO2 through the terminal the oxygen atoms HPW. The photocatalytic performance of prepared nanostructures was assessed in degradation of nitrobenzene. The nitrobenzene photodegradation kinetic study revealed that it well followed the Langmuir-Hinshelwood kinetic model with the apparent rate constant of 0.001 min-1 using anatase TiO2, 0.0004 min-1 using HPW, 0.0014 using HPW/TiO2, while it was obtained 0.0065 min-1 using Au NPs@HPW/TiO2 nanostructure. It shows that the photocatalytic rate of the prepared nanocomposites increased by 6.5- and 4.6-fold compared to photoactivity of anatase TiO2 and HPW/TiO2 respectively. Also, the photocatalytic mechanism of process was proposed. Moreover, the reusability study confirmed that its photocatalytic activity still remained high after three cycles.
Assuntos
Ouro , Nanopartículas Metálicas , Catálise , TitânioRESUMO
Potentiometric-based biosensors have the potential to advance the detection of several biological compounds and help in early diagnosis of various diseases. They belong to the portable analytical class of biosensors for monitoring biomarkers in the human body. They contain ion-sensitive membranes sensors can be used to determine potassium, sodium, and chloride ions activity while being used as a biomarker to gauge human health. The potentiometric based ion-sensitive membrane systems can be coupled with various techniques to create a sensitive tool for the fast and early detection of cancer biomarkers and other critical biological compounds. This paper discusses the application of potentiometric-based biosensors and classifies them into four major categories: photoelectrochemical potentiometric biomarkers, potentiometric biosensors amplified with molecular imprinted polymer systems, wearable potentiometric biomarkers and light-addressable potentiometric biosensors. This review demonstrated the development of several innovative biosensor-based techniques that could potentially provide reliable tools to test biomarkers. Some challenges however remain, but these can be removed by coupling techniques to maximize the testing sensitivity.
Assuntos
Técnicas Biossensoriais , Biomarcadores , Humanos , Polímeros , PotenciometriaRESUMO
In this study, a novel carbon nanotube (CNT) based nanocatalyst (Ni@Pd/CNT) was synthesized by modifying CNTs using Ni@Pd core-shell nanoparticles (NPs). Ni@Pd/CNT was used in catalytic carbonylative cross-coupling between 4-iodoanisole and phenylboronic acid. The Ni@Pd NPs possessed a magnetic nickel (Ni) core with a palladium (Pd) structural composite shell. Thus, the use of Ni had led to a reduced consumption of Pd without sacrificing the overall catalytic performance, simultaneously making it reusable as it could be conveniently recovered from the reaction mixture by using an external magnetic field. Immobilization of the Ni@Pd NPs on carbon nanotubes not only prevented their aggregation, but also significantly enhanced the accessibility of the catalytically active sites. The abovementioned approach based on carbon nanotubes and Ni@Pd NPs provided a useful platform for the fabrication of noble-metal-based nanocatalysts with easy accessibility and low cost, which may allow for an efficient green alternative for various catalytic reductions.
RESUMO
High-density and well-aligned ZnO-ZnS core-shell nanocone arrays were synthesized on fluorine-doped tin oxide glass substrate using a facile and cost-effective two-step approach. In this synthetic process, the ZnO nanocones act as the template and provide Zn2+ ions for the ZnS shell formation. The photoluminescence spectrum indicates remarkably enhanced luminescence intensity and a small redshift in the UV region, which can be associated with the strain caused by the lattice mismatch between ZnO and ZnS. The obtained diffuse reflectance spectra show that the nanocone-based heterostructure reduces the light reflection in a broad spectral range and is much more effective than the bare ZnO nanocone and nanorod structures. Dye-sensitized solar cells based on the heterostructure ZnO-ZnS nanocones are assembled, and high conversion efficiency (η) of approximately 4.07% is obtained. The η improvement can be attributed primarily to the morphology effect of ZnO nanocones on light-trapping and effectively passivating the interface surface recombination sites of ZnO nanocones by coating with a ZnS shell layer.
Assuntos
Eletrodos , Nanotubos/química , Energia Solar , Sulfetos/química , Compostos de Zinco/química , Óxido de Zinco/química , Nanoestruturas/química , Nanoestruturas/ultraestrutura , Nanotecnologia , Nanotubos/ultraestruturaRESUMO
Among the wide range of renewable energy sources, the ever-increasing demand for electricity storage represents an emerging challenge. Utilizing carbon nanotubes (CNTs) for energy storage is closely being scrutinized due to the promising performance on top of their extraordinary features. In this work, well-aligned multilayer carbon nanotubes were successfully synthesized on a porous silicon (PSi) substrate in a fast process using renewable natural essential oil via chemical vapor deposition (CVD). Considering the influx of vaporized multilayer vertical carbon nanotubes (MVCNTs) to the PSi, the diameter distribution increased as the flow rate decreased in the reactor. Raman spectroscopy results indicated that the crystalline quality of the carbon nanotubes structure exhibits no major variation despite changes in the flow rate. Fourier transform infrared (FT-IR) spectra confirmed the hexagonal structure of the carbon nanotubes because of the presence of a peak corresponding to the carbon double bond. Field emission scanning electron microscopy (FESEM) images showed multilayer nanotubes, each with different diameters with long and straight multiwall tubes. Moreover, the temperature programmed desorption (TPD) method has been used to analyze the hydrogen storage properties of MVCNTs, which indicates that hydrogen adsorption sites exist on the synthesized multilayer CNTs.
Assuntos
Cânfora/química , Fontes Geradoras de Energia , Nanotecnologia/métodos , Nanotubos de Carbono/química , Óleos de Plantas/química , Hidrogênio , Nanotubos de Carbono/ultraestrutura , Espectroscopia de Infravermelho com Transformada de Fourier , Análise Espectral Raman , TemperaturaRESUMO
Well-dispersed fish gelatin-based nanocomposites were prepared by adding ZnO nanorods (NRs) as fillers to aqueous gelatin. The effects of ZnO NR fillers on the mechanical, optical, and electrical properties of fish gelatin bio-nanocomposite films were investigated. Results showed an increase in Young's modulus and tensile strength of 42% and 25% for nanocomposites incorporated with 5% ZnO NRs, respectively, compared with unfilled gelatin-based films. UV transmission decreased to zero with the addition of a small amount of ZnO NRs in the biopolymer matrix. X-ray diffraction showed an increase in the intensity of the crystal facets of (10i1) and (0002) with the addition of ZnO NRs in the biocomposite matrix. The surface topography of the fish gelatin films indicated an increase in surface roughness with increasing ZnO NR concentrations. The conductivity of the films also significantly increased with the addition of ZnO NRs. These results indicated that bio-nanocomposites based on ZnO NRs had great potentials for applications in packaging technology, food preservation, and UV-shielding systems.