A Mathematical Study of Metal Biosorption on Algal-Bacterial Granular Biofilms.

A multiscale mathematical model describing the metals biosorption on algal-bacterial photogranules within a sequencing batch reactor (SBR) is presented. The model is based on systems of partial differential equations (PDEs) derived from mass conservation principles on a spherical free boundary domain with radial symmetry. Hyperbolic PDEs account for the dynamics of sessile species and their free sorption sites, where metals are adsorbed. Parabolic PDEs govern the diffusion, conversion and adsorption of nutrients and metals. The dual effect of metals on photogranule ecology is also modelled: metal stimulates the production of EPS by sessile species and negatively affects the metabolic activities of microbial species. Accordingly, a stimulation term for EPS production and an inhibition term for metal are included in all microbial kinetics. The formation and evolution of the granule domain are governed by an ordinary differential equation with a vanishing initial value, accounting for microbial growth, attachment and detachment phenomena. The model is completed with systems of impulsive differential equations describing the evolution of dissolved substrates, metals, and planktonic and detached biomasses within the granular-based SBR. The model is integrated numerically to examine the role of the microbial species and EPS in the adsorption process, and the effect of metal concentration and adsorption properties of biofilm components on the metal removal. Numerical results show an accurate description of the photogranules evolution and ecology and confirm the applicability of algal-bacterial photogranule technology for metal-rich wastewater treatment.

Investigation of the effect of different linker chemotypes on the inhibition of histone deacetylases (HDACs).

Histone Deacetylases (HDACs) are among the most attractive and interesting targets in anticancer drug discovery. The clinical relevance of HDAC inhibitors (HDACIs) is testified by four FDA-approved drugs for cancer treatment. However, one of the main drawbacks of these drugs resides in the lack of selectivity against the different HDAC isoforms, resulting in severe side effects. Thus, the identification of selective HDACIs represents an exciting challenge for medicinal chemists. HDACIs are composed of a cap group, a linker region, and a metal-binding group interacting with the catalytic zinc ion. While the cap group has been extensively investigated, less information is available about the effect of the linker on isoform selectivity. To this aim, in this work, we explored novel linker chemotypes to direct isoform selectivity. A small library of 25 hydroxamic acids with hitherto unexplored linker chemotypes was prepared. In vitro tests demonstrated that, depending on the linker type, some candidates selectively inhibit HDAC1 over HDAC6 isoform or vice versa. Docking calculations were performed to rationalize the effect of the novel linker chemotypes on biologic activity. Moreover, four compounds were able to increase the levels of acetylation of histone H3 or tubulin. These compounds were also assayed in breast cancer MCF7 cells to test their antiproliferative effect. Three compounds showed a significant reduction of cancer proliferation, representing valuable starting points for further optimization.

Oxidative Stress and Multi-Organel Damage Induced by Two Novel Phytocannabinoids, CBDB and CBDP, in Breast Cancer Cells.

Over the last few years, much attention has been paid to phytocannabinoids derived from Cannabis for their therapeutic potential. Δ9-tetrahydrocannabinol (Δ9-THC) and cannabidiol (CBD) are the most abundant compounds of the Cannabis sativa L. plant. Recently, novel phytocannabinoids, such as cannabidibutol (CBDB) and cannabidiphorol (CBDP), have been discovered. These new molecules exhibit the same terpenophenolic core of CBD and differ only for the length of the alkyl side chain. Roles of CBD homologs in physiological and pathological processes are emerging but the exact molecular mechanisms remain to be fully elucidated. Here, we investigated the biological effects of the newly discovered CBDB or CBDP, compared to the well-known natural and synthetic CBD (nat CBD and syn CBD) in human breast carcinoma cells that express CB receptors. In detail, our data demonstrated that the treatment of cells with the novel phytocannabinoids affects cell viability, increases the production of reactive oxygen species (ROS) and activates cellular pathways related to ROS signaling, as already demonstrated for natural CBD. Moreover, we observed that the biological activity is significantly increased upon combining CBD homologs with drugs that inhibit the activity of enzymes involved in the metabolism of endocannabinoids, such as the monoacylglycerol lipase (MAGL) inhibitor, or with drugs that induces the activation of cellular stress pathways, such as the phorbol ester 12-myristate 13-acetate (PMA).

Pitfalls in the analysis of phytocannabinoids in cannabis inflorescence.

The chemical analysis of cannabis potency involves the qualitative and quantitative determination of the main phytocannabinoids: Δ9-tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD), cannabigerol (CBG), cannabichromene (CBC), etc. Although it might appear as a trivial analysis, it is rather a tricky task. Phytocannabinoids are present mostly as carboxylated species at the aromatic ring of the resorcinyl moiety. Their decarboxylation caused by heat leads to a greater analytical variability due to both reaction kinetics and possible decomposition. Moreover, the instability of cannabinoids and the variability in the sample preparation, extraction, and analysis, as well as the presence of isomeric forms of cannabinoids, complicates the scenario. A critical evaluation of the different analytical methods proposed in the literature points out that each of them has inherent limitations. The present review outlines all the possible pitfalls that can be encountered during the analysis of these compounds and aims to be a valuable help for the analytical chemist. Graphical abstract.

Bioremediation of Dichlorodiphenyltrichloroethane (DDT)-Contaminated Agricultural Soils: Potential of Two Autochthonous Saprotrophic Fungal Strains.

DDT (dichlorodiphenyltrichloroethane) was used worldwide as an organochlorine insecticide to control agricultural pests and vectors of several insect-borne human diseases. It was banned in most industrialized countries; however, due to its persistence in the environment, DDT residues remain in environmental compartments, becoming long-term sources of exposure. To identify and select fungal species suitable for bioremediation of DDT-contaminated sites, soil samples were collected from DDT-contaminated agricultural soils in Poland, and 38 fungal taxa among 18 genera were isolated. Two of them, Trichoderma hamatum FBL 587 and Rhizopus arrhizus FBL 578, were tested for tolerance in the presence of 1-mg liter-1 DDT concentration by using two indices based on fungal growth rate and biomass production (the tolerance indices Rt:Rc and TI), showing a clear tolerance to DDT. The two selected strains were studied to evaluate catabolic versatility on 95 carbon sources with or without DDT by using the Phenotype MicroArray system and to investigate the induced oxidative stress responses. The two strains were able to use most of the substrates provided, resulting in both high metabolic versatility and ecological functionality in the use of carbon sources, despite the presence of DDT. The activation of specific metabolic responses with species-dependent antioxidant enzymes to cope with the induced chemical stress has been hypothesized, since the presence of DDT promoted a higher formation of reactive oxygen species in fungal cells than the controls. The tested fungi represent attractive potential candidates for bioremediation of DDT-contaminated soil and are worthy of further investigations.IMPORTANCE The spread and environmental accumulation of DDT over the years represent not only a threat to human health and ecological security but also a major challenge because of the complex chemical processes and technologies required for remediation. Saprotrophic fungi, isolated from contaminated sites, hold promise for their bioremediation potential toward toxic organic compounds, since they might provide an environment-friendly solution to contamination. Once we verified the high tolerance of autochthonous fungal strains to high concentrations of DDT, we showed how fungi from different phyla demonstrate a high metabolic versatility in the presence of DDT. The isolates showed the singular ability to keep their functionality, despite the DDT-induced production of reactive oxygen species.

Roles of saprotrophic fungi in biodegradation or transformation of organic and inorganic pollutants in co-contaminated sites.

For decades, human activities, industrialization, and agriculture have contaminated soils and water with several compounds, including potentially toxic metals and organic persistent xenobiotics. The co-occurrence of those toxicants poses challenging environmental problems, as complicated chemical interactions and synergies can arise and lead to severe and toxic effects on organisms. The use of fungi, alone or with bacteria, for bioremediation purposes is a growing biotechnology with high potential in terms of cost-effectiveness, an environmental-friendly perspective and feasibility, and often representing a sustainable nature-based solution. This paper reviews different ecological, metabolic, and physiological aspects involved in fungal bioremediation of co-contaminated soils and water systems, not only addressing best methods and approaches to assess the simultaneous presence of metals and organic toxic compounds and their consequences on provided ecosystem services but also the interactions between fungi and bacteria, in order to suggest further study directions in this field.

Analysis of phytocannabinoids in hemp seeds, sprouts and microgreens.

Hemp-sprouts are emerging as a new class of attractive functional food due to their numerous health benefits when compared to other sprout species. Indeed, the high content of beneficial components including polyphenols and flavonoids makes this type of food a promising and successful market. However, the available literature on this topic is limited and often conflicting as regards to the content of phytocannabinoids. High-performance liquid chromatography coupled to high-resolution mass spectrometry (HPLC-HRMS) was applied in an untargeted metabolomics fashion to extracts of hemp seeds, sprouts and microgreens of nine different genotypes. Both unsupervised and supervised multivariate statistical analysis was performed to reveal variety-specific profiles of phytocannabinoids with surprisingly remarkable levels of phytocannabinoids even in chemotype V samples. Furthermore, a targeted HPLC-HRMS analysis was carried out for the quantitative determination of the major phytocannabinoids including CBDA, CBD, CBGA, CBG, CBCA, CBC, THCA, and trans-Δ9-THC. The last part of the study was focused on the evaluation of the enantiomeric composition of CBCA in hemp seeds, sprouts and microgreens in the different varieties by HPLC-CD (HPLC with online circular dichroism). Chiral analysis of CBCA showed a wide variability of its enantiomeric composition in the different varieties, thus contributing to the understanding of the intriguing stereochemical behavior of this compound in an early growth stage. However, further investigation is needed to determine the genetic factors responsible for the low enantiopurity of this compound.

Synthesis and pharmacological activity of the epimers of hexahydrocannabinol (HHC).

Cannabis is a multifaceted plant with numerous therapeutic properties on one hand, and controversial psychotropic activities on the other hand, which are modulated by CB1 endocannabinoid receptors. Δ9-Tetrahydrocannabinol (Δ9-THC) has been identified as the main component responsible for the psychotropic effects, while its constitutional isomer cannabidiol (CBD) has shown completely different pharmacological properties. Due to its reported beneficial effects, Cannabis has gained global popularity and is openly sold in shops and online. To circumvent legal restrictions, semi-synthetic derivatives of CBD are now frequently added to cannabis products, producing "high" effects similar to those induced by Δ9-THC. The first semi-synthetic cannabinoid to appear in the EU was obtained through cyclization and hydrogenation of CBD, and is known as hexahydrocannabinol (HHC). Currently, there is limited knowledge regarding HHC, its pharmacological properties, and its prevalence, as it is not commonly investigated in routine toxicological assays. In this study, synthetic strategies were explored to obtain an excess of the active epimer of HHC. Furthermore, the two epimers were purified and individually tested for their cannabinomimetic activity. Lastly, a simple and rapid chromatographic method employing a UV detector and a high-resolution mass spectrometer was applied to identify and quantify up to ten major phytocannabinoids, as well as the HHC epimers, in commercial cannabis samples.

Enantioseparation of chiral phytocannabinoids in medicinal cannabis.

The evaluation of the chiral composition of phytocannabinoids in the cannabis plant is particularly important as the pharmacological effects of the (+) and (-) enantiomers of these compounds are completely different. Chromatographic attempts to assess the presence of the minor (+) enantiomers of the main phytocannabinoids, cannabidiolic acid (CBDA) and trans-Δ9-tetrahydrocannabinolic acid (trans-Δ9-THCA), were carried out on heated plant extracts for the determination of the corresponding decarboxylated species, cannabidiol (CBD) and trans-Δ9-tetrahydrocannabinol (trans-Δ9-THC), respectively. This process produces an altered phytocannabinoid composition with several new and unknown decomposition products. The present work reports for the first time the stereoselective synthesis of the pure (+) enantiomers of the main phytocannabinoids, trans-CBDA, trans-Δ9-THCA, trans-CBD and trans-Δ9-THC, and the development and optimization of an achiral-chiral liquid chromatography method coupled to UV and high-resolution mass spectrometry detection in reversed phase conditions (RP-HPLC-UV-HRMS) for the isolation of the single compounds and evaluation of their actual enantiomeric composition in plant. The isolation of the peaks with the achiral stationary phase ensured the absence of interferences that could potentially co-elute with the analytes of interest in the chiral analysis. The method applied to the Italian medicinal cannabis variety FM2 revealed no trace of the (+) enantiomers for all phytocannabinoids under investigation before and after decarboxylation, thus suggesting that the extraction procedure does not lead to an inversion of configuration.

Multiscale modelling of the start-up process of anammox-based granular reactors.

This work proposes a mathematical model on partial nitritation/anammox (PN/A) granular bioreactors, with a particular interest in the start-up phase. The formation and growth of granular biofilms is modelled by a spherical free boundary problem with radial symmetry and vanishing initial value. Hyperbolic PDEs describe the advective transport and growth of sessile species inhabiting the granules. Parabolic PDEs describe the diffusive transport and conversion of soluble substrates, and the invasion process mediated by planktonic species. Attachment and detachment phenomena are modelled as continuous and deterministic fluxes at the biofilm-bulk liquid interface. The dynamics of planktonic species and substrates within the bulk liquid are modelled through ODEs. A simulation study is performed to describe the start-up process of PN/A granular systems and the development of anammox granules. The aim is to investigate the role that the invasion process of anaerobic ammonia-oxidizing (anammox) bacteria plays in the formation of anammox granules and explore how it affects the microbial species distribution of anaerobic ammonia-oxidizing, aerobic ammonia-oxidizing, nitrite-oxidizing and heterotrophic bacteria. Moreover, the model is used to study the role of two key parameters in the start-up process: the anammox inoculum size and the inoculum addition time. Numerical results confirm that the model can be used to simulate the start-up process of PN/A granular systems and to predict the evolution of anammox granular biofilms, including the ecology and the microbial composition. In conclusion, after being calibrated, the proposed model could provide quantitatively reliable results and support the start-up procedures of full-scale PN/A granular reactors.

Mathematical modeling of metal recovery from E-waste using a dark-fermentation-leaching process.

In this work, an original mathematical model for metals leaching from electronic waste in a dark fermentation process is proposed. The kinetic model consists of a system of non-linear ordinary differential equations, accounting for the main biological, chemical, and physical processes occurring in the fermentation of soluble biodegradable substrates and in the dissolution process of metals. Ad-hoc experimental activities were carried out for model calibration purposes, and all experimental data were derived from specific lab-scale tests. The calibration was achieved by varying kinetic and stoichiometric parameters to match the simulation results to experimental data. Cumulative hydrogen production, glucose, organic acids, and leached metal concentrations were obtained from analytical procedures and used for the calibration. The results confirmed the high accuracy of the model in describing biohydrogen production, organic acids accumulation, and metals leaching during the biological degradation process. Thus, the mathematical model represents a useful and reliable tool for the design of strategies for valuable metals recovery from waste or mineral materials. Moreover, further numerical simulations were carried out to analyze the interactions between the fermentation and the leaching processes and to maximize the efficiency of metals recovery due to the fermentation by-products.

Antiseizure Effects of Cannabidiol Leading to Increased Peroxisome Proliferator-Activated Receptor Gamma Levels in the Hippocampal CA3 Subfield of Epileptic Rats.

We evaluated the effects of cannabidiol (CBD) on seizures and peroxisome proliferator-activated receptor gamma (PPARγ) levels in an animal model of temporal lobe epilepsy (TLE). Adult male Sprague-Dawley rats were continuously monitored by video-electrocorticography up to 10 weeks after an intraperitoneal kainic acid (15 mg/kg) injection. Sixty-seven days after the induction of status epilepticus and the appearance of spontaneous recurrent seizures in all rats, CBD was dissolved in medium-chain triglyceride (MCT) oil and administered subcutaneously at 120 mg/kg (n = 10) or 12 mg/kg (n = 10), twice a day for three days. Similarly, the vehicle was administered to ten epileptic rats. Brain levels of PPARγ immunoreactivity were compared to those of six healthy controls. CBD at 120 mg/kg abolished the seizures in 50% of rats (p = 0.033 vs. pre-treatment, Fisher's exact test) and reduced total seizure duration (p < 0.05, Tukey Test) and occurrence (p < 0.05). PPARγ levels increased with CBD in the hippocampal CA1 subfield and subiculum (p < 0.05 vs. controls, Holm−Sidák test), but only the highest dose increased the immunoreactivity in the hippocampal CA3 subfield (p < 0.001), perirhinal cortex, and amygdala (p < 0.05). Overall, these results suggest that the antiseizure effects of CBD are associated with upregulation of PPARγ in the hippocampal CA3 region.

Kynurenine and kynurenic acid: Two human neuromodulators found in Cannabis sativa L.

L-Kynurenine (KYN) and kynurenic acid (KYNA) are products of the metabolism of L-tryptophan (TRP) in the central nervous system of animals, but they are not commonly found in plants. In particular, KYNA is known for its interesting pharmacological properties (anti-oxidative, anti-inflammatory, hypolipidemic, and neuroprotective), which suggest a potential functional food ingredient role. The three compounds were identified in samples of Cannabis sativa L. by means of high-performance liquid chromatography coupled to high-resolution mass spectrometry using an untargeted metabolomics approach. Their concentrations were evaluated using a targeted metabolomics method in three organs of the plant (roots, stem, and leaves) in soil at two different growth stages and in hydroponics conditions. The distribution of TRP, KYN and KYNA was found tendentially higher in leaves compared to stem and roots and changed over time. Moreover, the levels of KYNA found in this study are unprecedentedly high compared to those found so far in other plant species, suggesting that Cannabis sativa L. could be a promising alternative source of this metabolite.

Cis-Δ9-tetrahydrocannabinolic acid occurrence in Cannabis sativa L.

Cannabidiolic acid (CBDA) and trans-Δ9-tetrahydrocannabinolic acid (trans-Δ9-THCA) are known to be the major phytocannabinoids in Cannabis sativa L., along with their decarboxylated derivatives cannabidiol (CBD) and trans-Δ9-tetrahydrocannabinol (trans-Δ9-THC). The cis isomer of Δ9-THC has been recently identified, characterized and quantified in several Cannabis sativa varieties, which had been heated (decarboxylated) before the analysis. Since decarboxylation alters the original phytocannabinoids composition of the plant, this work reports the identification and characterization of the carboxylated precursor cis-Δ9-THCA. The compound was also synthesized and used as analytical standard for the development and validation of a liquid chromatography coupled to high resolution mass spectrometry-based method for its quantification in ten Cannabis sativa L. samples from different chemotypes. The highest concentrations of cis-Δ9-THCA were found in CBD-rich varieties, lower levels were observed in cannabigerol (CBG)-rich varieties (chemotype IV) and in those varieties with a balanced level of both CBD and THC (chemotype III), while its levels were not detectable in cannabichromene (CBC)-rich varieties (chemotype VI). The presence of the cis isomer of THC and THCA raises the question on whether to include or not this species in the calculation of the total amount of THC to classify a cannabis variety as a drug-type or a fiber-type (hemp).

Origin of Δ9-Tetrahydrocannabinol Impurity in Synthetic Cannabidiol.

Introduction: Cannabidiol (CBD), the nonintoxicating constituent of cannabis, is largely employed for pharmaceutical and cosmetic purposes. CBD can be extracted from the plant or chemically synthesized. Impurities of psychotropic cannabinoids Δ9-tetrahydrocannabinol (Δ9-THC) and Δ8-THC have been found in extracted CBD, thus hypothesizing a possible contamination from the plant. Materials and Methods: In this study, synthetic and extracted CBD samples were analyzed by ultrahigh-performance liquid chromatography coupled to high-resolution mass spectrometry and the parameters that can be responsible of the conversion of CBD into THC were evaluated by an accelerated stability test. Results: In synthetic and extracted CBD no trace of THC species was detected. In contrast, CBD samples stored in the dark at room temperature on the benchtop for 3 months showed the presence of such impurities. Experiments carried out under inert atmosphere in the absence of humidity or carbon dioxide led to no trace of THC over time even at high temperature. Conclusions: The results suggested that the copresence of carbon dioxide and water from the air could be the key for creating the acidic environment responsible for the cyclization of CBD. These findings suggest that it might be appropriate to review the storage conditions indicated on the label of commercially available CBD.

HPLC-UV-HRMS analysis of cannabigerovarin and cannabigerobutol, the two impurities of cannabigerol extracted from hemp.

A sensitive and straightforward HPLC-UV method was developed for the simultaneous quantification of the two main impurities in "pure" commercial cannabigerol (CBG) samples. The identification of such impurities, namely cannabigerovarin (CBGV) and cannabigerobutol (CBGB), the propyl and butyl homologs of CBG, respectively, was accomplished employing the high-resolution mass spectrometry (HRMS) technique, and subsequently confirmed by comparison with the same compounds obtained by chemical synthesis. Complete spectroscopic characterization (NMR, FT-IR, UV, and HRMS) of both impurities is reported in the present work. The method was validated in terms of linearity, which was assessed in the range 0.01-1.00 µg/mL, sensitivity, selectivity, intra- and inter-day accuracy and precision, and short-term stability, which all satisfied the acceptance criteria of the ICH guidelines. Application of the method to the analysis of four commercial CBG samples highlighted a certain variability in the impurity profile that might be ascribed to the hemp variety of the starting plant material. With these new analytical standards in hand, it would be interesting to investigate their concentrations in different hemp varieties and expand the scope of a phytocannabinomics approach for a comprehensive profiling of this remarkable class of natural compounds.

A Genomic and Transcriptomic Study on the DDT-Resistant Trichoderma hamatum FBL 587: First Genetic Data into Mycoremediation Strategies for DDT-Polluted Sites.

Trichoderma hamatum FBL 587 isolated from DDT-contaminated agricultural soils stands out as a remarkable strain with DDT-resistance and the ability to enhance DDT degradation process in soil. Here, whole genome sequencing and RNA-Seq studies for T. hamatum FBL 587 under exposure to DDT were performed. In the 38.9 Mb-genome of T. hamatum FBL 587, 10,944 protein-coding genes were predicted and annotated, including those of relevance to mycoremediation such as production of secondary metabolites and siderophores. The genome-scale transcriptional responses of T. hamatum FBL 587 to DDT exposure showed 1706 upregulated genes, some of which were putatively involved in the cellular translocation and degradation of DDT. With regards to DDT removal capacity, it was found upregulation of metabolizing enzymes such as P450s, and potentially of downstream DDT-transforming enzymes such as epoxide hydrolases, FAD-dependent monooxygenases, glycosyl- and glutathione-transferases. Based on transcriptional responses, the DDT degradation pathway could include transmembrane transporters of DDT, antioxidant enzymes for oxidative stress due to DDT exposure, as well as lipases and biosurfactants for the enhanced solubility of DDT. Our study provides the first genomic and transcriptomic data on T. hamatum FBL 587 under exposure to DDT, which are a base for a better understanding of mycoremediation strategies for DDT-polluted sites.

The novel heptyl phorolic acid cannabinoids content in different Cannabis sativa L. accessions.

The recent discovery of the novel heptyl phytocannabinoids cannabidiphorol (CBDP) and Δ9-tetrahydrocannabiphorol (Δ9-THCP) raised a series of questions relating to the presence and abundance of these new unorthodox compounds in cannabis inflorescence or derived products. As fresh inflorescence contains mainly their acid precursors, which are not commercially available, an ad hoc stereoselective synthesis was performed in order to obtain cannabidiphorolic acid (CBDPA) and Δ9-tetrahydrocannabiphorolic acid (THCPA) to be used as analytical standards for quantitative purposes. The present work reports an unprecedented targeted analysis of both pentyl (C5) and heptyl (C7) CBD- and THC-type compounds in forty-nine cannabis samples representing four different chemotypes. Moreover, the ultrahigh performance liquid chromatography coupled to high-resolution mass spectrometry-based method was applied for the putative identification of other heptyl homologs of the most common phytocannabinoid acids, including cannabigerophorolic acid (CBGPA), cannabichromephorolic acid (CBCPA), cannabinophorolic acid (CBNPA), cannabielsophorolic acid (CBEPA), cannabicyclophorolic acid (CBLPA), cannabitriophorolic acid (CBTPA), and cannabiripsophorolic acid (CBRPA).

Identification of a new cannabidiol n-hexyl homolog in a medicinal cannabis variety with an antinociceptive activity in mice: cannabidihexol.

The two most important and studied phytocannabinoids present in Cannabis sativa L. are undoubtedly cannabidiol (CBD), a non-psychotropic compound, but with other pharmacological properties, and Δ9-tetrahydrocannabinol (Δ9-THC), which instead possesses psychotropic activity and is responsible for the recreative use of hemp. Recently, the homolog series of both CBDs and THCs has been expanded by the isolation in a medicinal cannabis variety of four new phytocannabinoids possessing on the resorcinyl moiety a butyl-(in CBDB and Δ9-THCB) and a heptyl-(in CBDP and Δ9-THCP) aliphatic chain. In this work we report a new series of phytocannabinoids that fills the gap between the pentyl and heptyl homologs of CBD and Δ9-THC, bearing a n-hexyl side chain on the resorcinyl moiety that we named cannabidihexol (CBDH) and Δ9-tetrahydrocannabihexol (Δ9-THCH), respectively. However, some cannabinoids with the same molecular formula and molecular weight of CBDH and Δ9-THCH have been already identified and reported as monomethyl ether derivatives of the canonical phytocannabinoids, namely cannabigerol monomethyl ether (CBGM), cannabidiol monomethyl ether (CBDM) and Δ9-tetrahydrocannabinol monomethyl ether (Δ9-THCM). The unambiguously identification in cannabis extract of the n-hexyl homologues of CBD and Δ9-THC different from the corresponding methylated isomers (CBDM, CBGM and Δ9-THCM) was achieved by comparison of the retention time, molecular ion, and fragmentation spectra with those of the authentic standards obtained via stereoselective synthesis, and a semi-quantification of these cannabinoids in the FM2 medical cannabis variety was provided. Conversely, no trace of Δ9-THCM was detected. Moreover, CBDH was isolated by semipreparative HPLC and its identity was confirmed by comparison with the spectroscopic data of the corresponding synthetic standard. Thus, the proper recognition of CBDH, CBDM and Δ9-THCH closes the loop and might serve in the future for researchers to distinguish between these phytocannabinoids isomers that show a very similar analytical behaviour. Lastly, CBDH was assessed for biological tests in vivo showing interesting analgesic activity at low doses in mice.

Understanding fungal potential in the mitigation of contaminated areas in the Czech Republic: tolerance, biotransformation of hexachlorocyclohexane (HCH) and oxidative stress analysis.

The study of the soil microbial community represents an important step in better understanding the environmental context. Therefore, biological characterisation and physicochemical integration are keys when defining contaminated sites. Fungi play a fundamental role in the soil, by providing and supporting ecological services for ecosystems and human wellbeing. In this research, 52 soil fungal taxa were isolated from in situ pilot reactors installed to a contaminated site in Czech Republic with a high concentration of hexachlorocyclohexane (HCH). Among the identified isolates, 12 strains were selected to evaluate their tolerance to different isomers of HCH by using specific indices (Rt:Rc; T.I.) and to test their potential in xenobiotic biotransformation. Most of the selected taxa was not significantly affected by exposure to HCH, underlining the elevated tolerance of all the tested fungal taxa, and different metabolic intermediates of HCH dechlorination were observed. The oxidative stress responses to HCH for two selected species, Penicillium simplicissimum and Trichoderma harzianum, were investigated in order to explore their toxic responses and to evaluate their potential functioning in bioremediation of contaminated environments. This research suggests that the isolated fungal species may provide opportunities for new eco-friendly, integrated and cost-effective solutions for environmental management and remediation, considering their efficient adaptation to stressful conditions.