Characterization of the interactions between Fulvic acid and Trypsin with Spectroscopic and Molecular Docking technology.

The interaction mechanism between trypsin and fulvic acid was analyzed by multispectral method and molecular docking simulation. The fluorescence spectra showed that fulvic acid induced static quenching of trypsin. The validity of this conclusion was further substantiated through the computation of the binding constants. The thermodynamic parameters show that the reaction is mainly controlled by van der Waals force and hydrogen bond force, and the reaction is spontaneous. In addition, based on the obtained binding distance, there may be a non-radiative energy transfer between the two. The ultraviolet spectrum showed that fulvic acid could shift the absorption peak of trypsin, indicating that fulvic acid had an effect on the secondary structure of trypsin. According to the synchronous fluorescence spectrum results, fulvic acid primarily interacts with tryptophan residues in trypsin and induces alterations in their microenvironment. Three-dimensional fluorescence spectrum and circular dichroism further proves this conclusion. The molecular docking simulation reveals that the interaction between the two groups primarily arises from hydrogen bonding and van der Waals forces. The findings suggest that FA has the ability to induce conformational changes in trypsin's secondary structure.

Effect of Chloramphenicol as Antibiotic on the Structure and Function of Pepsin and Its Mechanism of Action.

The interaction between chloramphenicol (CHL) and pepsin (PEP), as well as the impact of CHL on PEP conformation, were investigated using spectroscopic techniques and molecular docking simulations in this study. The experimental results demonstrate that CHL exhibits a static quenching effect on PEP. The thermodynamic parameters indicate that the reaction between CHL and PEP is spontaneous, primarily driven by hydrogen bonding and van der Waals forces. Moreover, the binding distance of r<7 nm suggests the occurrence of Förster's non-radiative energy transfer between these two molecules. In the synchronous fluorescence spectrum, the maximum fluorescence intensity of PEP produced a redshift phenomenon, indicating that CHL was bound to tryptophan residues of PEP. The addition of CHL induces changes in the secondary structure of PEP, as confirmed by the observed alterations in peak values in three-dimensional fluorescence spectra. The UV spectra reveal a redshift of 3 nm in the maximum absorption peak, indicating a conformational change in the secondary structure of PEP upon addition of CHL. Circular dichroism analysis demonstrates significant alterations in the α-helix, ß-sheet, ß-turn, and random coil contents of PEP before and after CHL incorporation, further confirming its ability to modulate the secondary structure of PEP.

Characterization of the Interactions between Minocycline Hydrochloride and Trypsin with Spectroscopic and Molecular Docking Technology.

In the current study, the interaction of minocycline hydrochloride (MC) and trypsin (TRP) was studied using fluorescence spectroscopy, synchronous fluorescence spectroscopy, three-dimensional fluorescence spectroscopy, UV-Vis spectroscopy, and molecular docking simulation techniques. The results show that the fluorescence quenching of trypsin at different degrees can be caused by minocycline hydrochloride at different temperatures. According to the Stern-Volmer equation, the fluorescence quenching type was static quenching. By calculating critical distance, we concluded that there is a possibility of non-radiative energy transfer between minocycline hydrochloride and trypsin. The effect of minocycline hydrochloride on the secondary structure of trypsin was demonstrated using ultraviolet spectroscopy. Synchronous fluorescence spectroscopy showed that minocycline hydrochloride could bind to tryptophan residues in trypsin, resulting in corresponding changes in the secondary structure of trypsin. Three-dimensional fluorescence spectroscopy showed that minocycline hydrochloride had a particular effect on the microenvironment of trypsin that led to changes in the secondary structure of trypsin. The molecular docking technique demonstrated that the binding of minocycline hydrochloride and trypsin was stable. Circular dichroism showed that the secondary structure of trypsin could be changed by minocycline hydrochloride.

Recycling Coal Fly Ash for Super-Thermal-Insulating Aerogel Fiber Preparation with Simultaneous Al2O3 Extraction.

A large quantity of coal fly ash is generated worldwide from thermal power plants, causing a serious environmental threat owing to disposal and storage problems. In this work, for the first time, coal fly ash is converted into advanced and novel aerogel fibers and high-purity α-Al2O3. Silica-bacterial cellulose composite aerogel fibers (CAFs) were synthesized using an in situ sol-gel process under ambient pressure drying. Due to the unique "nanoscale interpenetrating network" (IPN) structure, the CAFs showed wonderful mechanical properties with an optimum tensile strength of 5.0 MPa at an ultimate elongation of 5.8%. Furthermore, CAFs with a high porosity (91.8%) and high specific surface area (588.75 m2/g) can inherit advanced features, including excellent thermal insulation, stability over a wide temperature range, and hydrophobicity (contact angle of approximately 144°). Additionally, Al2O3 was simultaneously extracted from the coal fly ash to ensure that the coal fly ash was fully exploited. Overall, low-cost woven CAFs fabrics are suitable for wearable applications and offer a great approach to comprehensively use coal fly ash to address environmental threats.

Hydrophobic Silk Fibroin-Agarose Composite Aerogel Fibers with Elasticity for Thermal Insulation Applications.

Aerogel fibers, characterized by their ultra-low density and ultra-low thermal conductivity, are an ideal candidate for personal thermal management as they hold the potential to effectively reduce the energy consumption of room heating and significantly contribute to energy conservation. However, most aerogel fibers have weak mechanical properties or require complex manufacturing processes. In this study, simple continuous silk fibroin-agarose composite aerogel fibers (SCAFs) were prepared by mixing agarose with silk fibroin through wet spinning and rapid gelation, followed by solvent replacement and supercritical carbon dioxide treatment. Among them, the rapid gelation of the SCAFs was achieved using agarose physical methods with heat-reversible gel properties, simplifying the preparation process. Hydrophobic silk fibroin-agarose composite aerogel fibers (HSCAFs) were prepared using a simple chemical vapor deposition (CVD) method. After CVD, the HSCAFs' gel skeletons were uniformly coated with a silica layer containing methyl groups, endowing them with outstanding radial elasticity. Moreover, the HSCAFs exhibited low density (≤0.153 g/cm3), a large specific surface area (≥254.0 m2/g), high porosity (91.1-94.7%), and excellent hydrophobicity (a water contact angle of 136.8°). More importantly, they showed excellent thermal insulation performance in low-temperature (-60 °C) or high-temperature (140 °C) environments. The designed HSCAFs may provide a new approach for the preparation of high-performance aerogel fibers for personal thermal management.

Woven Agarose-Cellulose Composite Aerogel Fibers with Outstanding Radial Elasticity for Personal Thermal Management.

Aerogel fibers are good thermal insulators, suitable for weaving, and show potential as the next generation of intelligent textiles that can effectively reduce heat consumption for personal thermal management. However, the production of continuous aerogel fibers from biomass with sufficient strength and radial elasticity remains a significant challenge. Herein, continuous gel fibers were produced via wet spinning using agarose (AG) as the matrix, 2,2,2,6,6-tetramethylpiperidine-1-oxyl radical-oxidized cellulose nanofibers (TOCNs) as the reinforcing agent, and no other chemical additives by utilizing the gelling properties of AG. Supercritical drying and chemical vapor deposition (CVD) were then used to produce hydrophobic AG-TOCN aerogel fibers (HATAFs). During CVD, the HATAF gel skeleton was covered with an isostructural silica coating. Consequently, the HATAFs can recover from radial compression under 60% strain. Moreover, the HATAFs have low densities (≤0.14 g cm-3), high porosities (≥91.8%), high specific surface areas (≥188 m2 g-1), moderate tensile strengths (≤1.75 MPa), excellent hydrophobicity (water contact angles of >130°), and good thermal insulating properties at different temperatures. Thus, HATAFs are expected to become a new generation of materials for efficient personal thermal management.

Bioinspired hierarchical and dual-morphology humic-acid/pectin/chitosan composite aerogels for efficient removal of pollutants from wastewater.

How to solve the contradiction between the efficiency and adsorption rate of porous materials in adsorbing pollutants has always been one of the focus issues. In this study, the small landscape cypress trees structure like biomimetic of a hierarchical and dual morphology 3D porous HA-based aerogel was designed and synthesized to use humic acid (HA), pectin (PE) and chitosan (CTS) as raw materials, which it was formed by the disorderly overlapping of lamella composed of fiber networks in 3D space. Due to its special microstructure, it can be used like separation membrane, which allowing for rapid adsorption of pollutants in the water while the water flow passes through quick. In general, this work provides a new concept for owning fast adsorption rate and efficient adsorption of porous materials of preparation to use green method.

Robust SiO2-Al2O3/Agarose Composite Aerogel Beads with Outstanding Thermal Insulation Based on Coal Gangue.

Advanced SiO2-Al2O3 aerogel materials have outstanding potential in the field of thermal insulation. Nevertheless, the creation of a mechanically robust and low-cost SiO2-Al2O3 aerogel material remains a considerable challenge. In this study, SiO2-Al2O3 aerogel based on coal gangue, which is a type of zero-cost inorganic waste, was constructed in porous agarose aerogel beads, followed by simple chemical vapor deposition of trimethylchlorosilane to fabricate SiO2-Al2O3/agarose composite aerogel beads (SCABs). The resulting SCABs exhibited a unique nanoscale interpenetrating network structure, which is lightweight and has high specific surface area (538.3 m2/g), hydrophobicity (approximately 128°), and excellent thermal stability and thermal insulation performance. Moreover, the compressive strength of the SCABs was dramatically increased by approximately a factor of ten compared to that of native SiO2-Al2O3 aerogel beads. The prepared SCABs not only pave the way for the design of a novel aerogel material for use in thermal insulation without requiring expensive raw materials, but also provide an effective way to comprehensively use coal gangue.

Robust Silica-Agarose Composite Aerogels with Interpenetrating Network Structure by In Situ Sol-Gel Process.

Aerogels are three-dimensional nanoporous materials with outstanding properties, especially great thermal insulation. Nevertheless, their extremely high brittleness restricts their practical application. Recently, although the mechanical properties of silica aerogels have been improved by regulating the precursor or introducing a polymer reinforcer, these preparation processes are usually tedious and time-consuming. The purpose of this study was to simplify the preparation process of these composite aerogels. A silicic acid solution treated with cation exchange resin was mixed with agarose (AG) to gel in situ, and then composite aerogels (CAs) with an interpenetrating network (IPN) structure were obtained by aging and supercritical CO2 fluid (SCF) drying. Compared to previous works, the presented CAs preparation process is briefer and more environmentally friendly. Moreover, the CAs exhibit a high specific surface area (420.5 m2/g), low thermal conductivity (28.9 mW m-1 K-1), excellent thermal insulation properties, and thermal stability. These results show that these CAs can be better used in thermal insulation.

Silica-Bacterial Cellulose Composite Aerogel Fibers with Excellent Mechanical Properties from Sodium Silicate Precursor.

Forming fibers for fabric insulation is difficult using aerogels, which have excellent thermal insulation performance but poor mechanical properties. A previous study proposed a novel method that could effectively improve the mechanical properties of aerogels and make them into fibers for use in fabric insulation. In this study, composite aerogel fibers (CAFs) with excellent mechanical properties and thermal insulation performance were prepared using a streamlined method. The wet bacterial cellulose (BC) matrix without freeze-drying directly was immersed in an inorganic precursor (silicate) solution, followed by initiating in situ sol-gel reaction under the action of acidic catalyst after secondary shaping. Finally, after surface modification and ambient drying of the wet composite gel, CAFs were obtained. The CAFs prepared by the simplified method still had favorable mechanical properties (tensile strength of 4.5 MPa) and excellent thermal insulation properties under extreme conditions (220 °C and -60 °C). In particular, compared with previous work, the presented CAFs preparation process is simpler and more environmentally friendly. In addition, the experimental costs were reduced. Furthermore, the obtained CAFs had high specific surface area (671.3 m²/g), excellent hydrophobicity, and low density (≤0.154 g/cm3). This streamlined method was proposed to prepare aerogel fibers with excellent performance to meet the requirements of wearable applications.

Robust Silica-Bacterial Cellulose Composite Aerogel Fibers for Thermal Insulation Textile.

Aerogels are nanoporous materials with excellent properties, especially super thermal insulation. However, owing to their serious high brittleness, the macroscopic forms of aerogels are not sufficiently rich for the application in some fields, such as thermal insulation clothing fabric. Recently, freeze spinning and wet spinning have been attempted for the synthesis of aerogel fibers. In this study, robust fibrous silica-bacterial cellulose (BC) composite aerogels with high performance were synthesized in a novel way. Silica sol was diffused into a fiber-like matrix, which was obtained by cutting the BC hydrogel and followed by secondary shaping to form a composite wet gel fiber with a nanoscale interpenetrating network structure. The tensile strength of the resulting aerogel fibers reached up to 5.4 MPa because the quantity of BC nanofibers in the unit volume of the matrix was improved significantly by the secondary shaping process. In addition, the composite aerogel fibers had a high specific area (up to 606.9 m2/g), low density (less than 0.164 g/cm3), and outstanding hydrophobicity. Most notably, they exhibited excellent thermal insulation performance in high-temperature (210 °C) or low-temperature (-72 °C) environments. Moreover, the thermal stability of CAFs (decomposition temperature was about 330 °C) was higher than that of natural polymer fiber. A novel method was proposed herein to prepare aerogel fibers with excellent performance to meet the requirements of wearable applications.

Robust Silica-Cellulose Composite Aerogels with a Nanoscale Interpenetrating Network Structure Prepared Using a Streamlined Process.

Silica aerogels can be strengthened by forming a nanoscale interpenetrating network (IPN) comprising a silica gel skeleton and a cellulose nanofiber network. Previous studies have demonstrated the effectiveness of this method for improving the mechanical properties and drying of aerogels. However, the preparation process is generally tedious and time-consuming. This study aims to streamline the preparation process of these composite aerogels. Silica alcosols were directly diffused into cellulose wet gels with loose, web-like microstructures, and an IPN structure was gradually formed by regulating the gelation rate. Supercritical CO2 drying followed to obtain composite aerogels. The mechanical properties were further enhanced by a simple secondary regulation process that increased the quantity of bacterial cellulose (BC) nanofibers per unit volume of the matrix. This led to the production of aerogels with excellent bendability and a high tensile strength. A maximum breaking stress and tensile modulus of 3.06 MPa and 46.07 MPa, respectively, were achieved. This method can be implemented to produce robust and bendable silica-based composite aerogels (CAs).

Surface modification of bacterial cellulose aerogels' web-like skeleton for oil/water separation.

The cellulose nanofibers of bacterial cellulose aerogel (BCA) are modified only on their surfaces using a trimethylsilylation reaction with trimethyichlorosilane in liquid phase followed by freeze-drying. The obtained hydrophobic bacterial cellulose aerogels (HBCAs) exhibit low density (≤6.77 mg/cm(3)), high surface area (≥169.1 m(2)/g), and high porosity (≈ 99.6%), which are nearly the same as those of BCA owing to the low degrees of substitution (≤0.132). Because the surface energy of cellulose nanofibers decreased and the three-dimensional web-like microstructure, which was comprised of ultrathin (20-80 nm) cellulose nanofibers, is maintained during the trimethylsilylation process, the HBCAs have hydrophobic and oleophilic properties (water/air contact angle as high as 146.5°) that endow them with excellent selectivity for oil adsorption from water. The HBCAs are able to collect a wide range of organic solvents and oils with absorption capacities up to 185 g/g, which depends on the density of the liquids. Hence, the HBCAs are wonderful candidates for oil absorbents to clean oil spills in the marine environment. This work provides a different way to multifunctionalize cellulose aerogel blocks in addition to chemical vapor deposition method.