Mediating effect of psychological distress and mindful eating behaviors between orthorexia nervosa and academic self-efficacy among Lebanese university female students.

OBJECTIVES: This study examined the mediating effect of psychological distress and mindful eating behaviors between orthorexia nervosa and academic self-efficacy among Lebanese university female students. METHODS: A total of 769 female participants enrolled in this cross-sectional study (mean age 21.58 ± 3.20 years). A self-administered questionnaire was distributed among university female students. The questionnaire consisted of Mindful Eating Behaviors Scale, ORTO-R, Depression Anxiety Stress Scale, and Arabic version of Academic Self-Efficacy Scale. RESULTS: The results showed that psychological distress fully mediated the association between orthorexia nervosa and academic self-efficacy; higher orthorexia nervosa was significantly associated with less psychological distress (ß= -0.31, p =.05), with more psychological distress significantly associated with lower academic self-efficacy (ß= -0.32, p =.09). Focused eating fully mediated the association between orthorexia nervosa and academic self-efficacy; higher orthorexia nervosa was significantly associated with less focused eating (ß=-0.09, p =.04), with more focused eating significantly associated with better academic self-efficacy (ß = 1.40, p =.10). Orthorexia nervosa was not directly associated with academic self-efficacy in both models. CONCLUSION: This study shed light on important connections between orthorexia nervosa, psychological distress, mindful eating behaviors, and academic self-efficacy within the Lebanese context. The findings will have practical implications for both educational institutions and healthcare providers striving to support young female adults' overall well-being and academic success.

Complete denture palatal rugae design impact on satisfaction and quality of life.

OBJECTIVES: To compare the impact of three complete denture palatal rugae designs on participants' satisfaction and oral-health-related quality of life. BACKGROUND: Complete dentures palatal rugea are usually polished to a smooth finish, which can affect the patient's adaptation. Roughening or keeping an opening in the rugae area to replicate the natural sensation of the palatal rugae has been suggested but lacks clinical evidence. METHODS: This randomised crossover trial included participants with complete dentures randomly allocated to six sequences. Each sequence alternated between polished, roughened, and open rugae designs. Participants evaluated general and domain-specific satisfaction (eating, taste, speaking, phonetics, and ease of cleaning) on a 100-mm visual analogue scale. They also completed the Oral Health Impact Profile for Edentulous Patients (OHIP-EDENT) and indicated their preferred design at the end. Repeated-measure ANOVA compared satisfaction, and one-way ANOVA with Tukey's test compared OHIP-EDENT scores. RESULTS: Forty-two participants were randomised. Seven dropped out. General satisfaction ratings were comparable for the polished (Mean = 80.2, SD = 19.7) and roughened designs (Mean = 79.5, SD = 20.2). However, the open design had a significantly lower satisfaction rating (Mean = 41.1, SD = 32.2). OHIP-EDENT scores for the open design (Mean = 44.9, SD = 17.5) were significantly worse than those for the polished (Mean = 36.1, SD = 12.7) and roughened designs (Mean = 36.2, SD = 13.3). Two-thirds of the participants chose the polished design. One-third chose the roughened design; of those, 83% were first-time denture wearers. CONCLUSIONS: Complete dentures with polished and roughened rugae designs were perceived similarly. Both designs could be recommended based on the patient's preference. However, the open design should be avoided due to negative perception.

Exam evaluation in prosthodontics across preclinical and clinical years from students' perspective: A cross-sectional study.

INTRODUCTION: The purpose of this study was to explore the students' perceptions and performance in prosthodontics theory exam. METHODS: A cross-sectional descriptive study was conducted on 560 (80.82%) students of different levels (third, fourth and fifth years) to explore their opinions and performance with regard to a number of issues on a prosthodontics theory exam (exam evaluation, exam preparation, exam material, exam timing). Demographic data were also collected. Descriptive statistics were generated and Chi-square test, independent sample t-test, ANOVA test and Pearson's correlation coefficient were used to examine the associations between different variables. The significance level was set at p < .05. RESULTS: Students' responses regarding exam evaluation was influenced by their gender, study level, high-school Grade Point Average (GPA) and undergraduate cumulative GPA. Perceived exam difficulty was significantly affected by gender (p = .03) and study level (p < .001), and negatively correlated to both high-school GPA (p < .001) and university GPA (p = .03). The vast majority (88.2%) depended on lecture hand-outs and lecture notes for study. Exam material and preparation were not significantly affected by any of the demographic variables with most respondents (76.8%) thinking that the lectures blended with prosthodontics laboratories/clinics would improve their understanding of the exam material. The suggested best time to conduct the exam was early afternoon (31.6%). Student performance was significantly affected by the study level (p < .001) and cumulative GPA (p < .001) with significant positive correlation between the high-school GPA and the mark in the exam (r = .29, p < .001) and by the amount of time students spent for exam preparation (p < .001). Those students who reported using textbooks to prepare for the exam got significantly higher marks (66.1 ± 8.7) compared to the students who did not (62.8 ± 9.7) (p = .03). CONCLUSIONS: Course level, GPA and gender were identified as the most influential factors in different aspects of exam evaluation and students' performance. Regular study and use of textbooks were demonstrated to improve academic performance. Additional orientation and guidance relating to the exam (especially for third year students) would be welcomed, as would alternate teaching methods such as small group discussions or study groups.

Effect of bioceramic powder abrasion on different implant surfaces.

PURPOSE: Bioceramic coatings have been shown to promote bone repair, which aids in the early integration of implants. This study aimed to evaluate the influence of air abrasion with a bioceramic abrasive on the surface characteristics of different implant materials and surfaces. The dissolution of the applied treatment from the surfaces over 3 weeks was also assessed. MATERIALS AND METHODS: Discs of three alloys used for dental implants were studied and compared: two types of commercially pure titanium (CpTi)/ (CpTi SLActive) and titanium-zirconia (TiZr). The tested surfaces were: CpTi control (CpC), sandblasted (SB), sandblasted and acid-etched (SBE), and CpTi SLActive®, (TiZr) Roxolid®. Three discs from each group underwent air abrasion with apatite bioceramic powders, 95% hydroxyapatite (HA)/5% calcium oxide (CaO), and 90% hydroxyapatite (HA)/10% calcium oxide (CaO). The treated discs were surface characterized by optical profilometry to obtain surface roughness, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS) to compare element weight percentages of titanium, calcium, and phosphate. Dissolution was assessed using inductively coupled plasma optic emission spectrometry (ICP-OES). RESULTS: Bioceramic powders were deposited on all tested surfaces leading to changes in surface characteristics. The only statistically significant differences between the material groups for surface roughness were found with 95% HA/5% CaO powder in the Sp and Rp parameters (p = 0.03 and 0.04, respectively). There were no significant differences in the Ca and P wt% between all groups and powders 95% HA/5% CaO and 90% HA/10% CaO (p = 0.14, 0.18, and p = 0.15, 0.12, respectively). A non-uniform dispersion of the treatment on the surface layer was visible on all treated surfaces. The bioceramic powder continued to dissolute from the tested surfaces for 3 weeks. CONCLUSION: Bioceramic abrasion modifies implant surface characteristics, although the change in surface characteristics resulting from such treatment was not influenced by the implant material or surface treatment. Air abrasion with hydroxyapatite and calcium oxide bioceramics leaves powder deposits on the treated implant surfaces that could potentially influence the healing of implants affected by peri-implantitis.

Rating communication skills in dental practice: the impact of different sociodemographic factors.

BACKGROUND: Communication abilities are essential for the successful operation of a dental business and significantly influence outcomes, compliance, and patient satisfaction. AIMS AND METHODS: The aim of our study was to evaluate the knowledge and practice of doctor-patient communication among Jordanian dentists. This evaluation was conducted through a survey based on the key components of the Calgary Cambridge Observation Guides. Additionally, the impact of several sociodemographic characteristics on communication abilities was investigated. This cross-sectional study was conducted from January to June 2022. The data collection tool was an online questionnaire developed by the researchers, consisting of three sections: self-reported demographic and professional data, the practice of doctor-patient communication, and knowledge of doctor-patient communication. RESULTS: The study included 305 dentists, comprising 106 males and 199 females, with a mean age of 32.9 ± 9.0 years. The mean score for communication skills knowledge was 41.5, indicating a moderate level of communication skills knowledge. Female dentists demonstrated significantly higher communication scores compared to their male counterparts, and those working in the private sector scored significantly higher than those in the governmental sector or in both sectors (P ≤ 0.05). In general, older and more experienced dentists exhibited better communication skills. Educational level had a positive impact on certain communication skills items. 58.4% believed that communication skills can always be developed and improved through training sessions, while 48.9% reported never having attended such courses. 95.1% believed that training courses on communication skills are always necessary as part of the educational curriculum. The main obstacles that may deter dentists from considering communication skills courses were limited time (62.3%), course availability (37.7%), cost (28.2%), and perceived lack of importance (8.2%). CONCLUSION: Among a sample of Jordanian dentists, there appears to be a discrepancy between knowledge and self-reported practices regarding communication abilities. In certain crucial, evidence-based areas of doctor-patient communication, there are fundamental deficiencies. Considering the significant role dentists play in oral health and prevention, communication skills should be a top educational priority for them.

Three-dimensional microscopic comparison of wear behavior between immature and mature enamel: an in vitro study.

BACKGROUND: Dental enamel, the hardest outermost layer of a human tooth, is subjected to occlusal forces throughout life during different oral function as talking, mastication etc. Due to this continuous stress, wear causes the loss of this protective shell. This study aimed to detect microscopic differences in enamel's wear behavior among different age groups of adolescents and adults. AIMS AND METHODS: Enamel specimens from immature open-apex and mature closed-apex premolars were subjected to simulated occlusal wear of impact and sliding wear test ISWT. Upper and lower enamel specimens were made to come in contact under controlled conditions. The enamel specimens' surfaces were examined using different microscopes. The upper and lower specimens were subjected to the following tests; pre-test light microscopy examination, enamel specimens' preparation for ISWT, scanning laser confocal microscopy of upper specimens, three-dimensional (3D) colored laser microscope and a Profilometer imaging of the lower specimens. RESULTS: Wear characteristics, including wear areas, crater depths, and relation to enamel microstructures, differed among different age groups. Immature enamel from the upper specimens was more resistant to chipping than mature enamel with no statistically significant wear area difference. The immature enamel craters from the lower specimens were wider and deeper than those in the mature enamel; the wear areas in the mature enamel in the lower specimens were almost flat and smooth. The wear areas in the immature enamel in the lower specimens were significantly larger than those in the mature enamel. CONCLUSIONS: Wear characteristics of the immature enamel are different from those of the mature enamel. Hence, it should be repaired using restorative materials with compatible wear properties.

The effect of water storage on nanoindentation creep of various CAD-CAM composite blocks.

BACKGROUND: To study the effect of water storage (3 months) on the creep deformation of various CAD-CAM composite structures at the nanoscale and compare it to that at the macroscale. METHODS: Seven CAD-CAM blocks were investigated: five resin-composite blocks (RCB), one polymer-infiltrated ceramic network (PICN) block, and one ceramic-filled polyetheretherketone (PEEK) block. Specimens of each material (n = 6) were separated into two groups (n = 3) according to their storage conditions (24 h dry storage at 23˚C and 3 months storage in 37˚C distilled water). Nano-indentation creep measurements were undertaken (creep depth measured in µm) using a nanoindenter (Nanovea) equipped with Berkovich three-sided pyramidal diamond tip. The machine was set for the chosen parameters: a load of 20 gf, a pause of 20 s, and the material type. Thirty indentations on 3 samples were made for each material for each test. Data were analysed using two-way ANOVA followed by one-way ANOVA and Bonferroni post hoc tests and independent t-test (< 0.05) for comparisons between the materials. RESULTS: The nanoindentation creep depth after 24 h storage ranged from 0.09 to 0.33 µm and increased after 3 months storage in distilled water to between 0.28 and 3.46 µm. There was a statistically significant difference in nanoindentation creep behaviour between the two storage conditions for each investigated material (independent t-test) and between all materials (Bonferroni post hoc). There was a non-significant negative correlation between nanoindentation creep (µm) and filler weight% at 24 h dry storage but a significant correlation at 3 months of water storage. A further non-significant positive correlation between nanoindentation creep (µm) and bulk compressive creep (%) was found. CONCLUSION: The PICN material showed superior dimensional stability in terms of nanoindentation creep depth in both storage conditions. Other composite blocks showed comparable performance at 24 h dry condition, but an increased nanoindentation creep upon water storage.

The impact of surgical guide design and bone quality on heat generation during pilot implant site preparation: an in vitro study.

BACKGROUND: Surgical guides restrict the flow of cooling agent to osteotomy site, which will lead to a temperature rise that provokes tissue injury. Few studies compared differences in the temperature changes between non-limiting 'conventional' and limiting 'guided' surgical guides during implant site preparation. The objective of this study was to investigate the difference in temperature changes during bone drilling for implant placement using non-limiting and limiting surgical guides at cortical and cancellous bone levels. METHODS: Forty-four bovine rib samples were used for implant bed preparation in this study with a minimum thickness of 11 mm was chosen for the ribs. The bone was stored in a freezer at 10 °C until it was used. On the day of the study, the bone was defrosted and soaked in water at 21 °C for three hours before embarking on drilling to make sure each sample was at the same temperature when tested. Forty-four bone specimens were prepared and randomly allocated to receive either a limiting or a non-limiting surgical guides (22 for each group). The osteotomy site was prepared by one operator following the manufacturer's instructions, using limiting and non-limiting surgical guides. Temperature changes were recorded during implant bed preparation using thermocouples that fit into 7 mm-horizontal channels at two different depths (Coronally) and (Apically) at 1 mm distance from the osteotomy site. The data were tested for homogeneity of variances using Levene's test, then data were analyzed using an Independent sample t-test and the significance level was set at P ≤ 0.05. RESULTS: The mean temperature rise for all samples was 0.55 °C. The mean temperature rises for the limiting and non-limiting surgical guides were 0.80 °C and 0.33 °C respectively. There was a statistically significant difference in temperature rise between the limiting and non-limiting surgical guides (P = 0.008). In relation to position of temperature recording (coronal vs. apical), there was no significant difference (P > 0.05). No significant difference was noted between the two groups at cancellous bone level (P = 0.68), but the difference was significant at cortical bone level (P = 0.036). CONCLUSION: Limiting surgical guides showed higher readings than non-limiting. However, for both techniques, temperature rise was not significant clinically and within a safe range.

Long-term hydrolytic stability of CAD/CAM composite blocks.

This study aimed to assess water sorption and solubility of CAD/CAM composite blocks compared to CAD/CAM ceramic after 8 months storage in water and artificial saliva. Eight CAD/CAM blocks were investigated: Five resin-composite blocks (RCBs), one polymer-infiltrated ceramic network (PICN) block, one ceramic-filled polyetheretherketone (PEEK) block, and one feldspathic ceramic block. One hundred and twelve specimens were prepared comprising 14 specimens of each of the eight materials. From each group of specimens, seven randomly selected specimens were immersed in 10 mL of water, while the other seven specimens were immersed in artificial saliva. All specimens were stored at 37°C and weighed at various time intervals. The data were analysed via repeat measures ANOVA, one-way ANOVA and Tukey's post hoc test (α = 0.05 for all tests). Sorption values (mean [SD]) in water were within the range -1.21 (0.4) to 39.3 (2.1) µg/mm3 and in artificial saliva between -0.7 (0.2) and 41.6 (1.3) µg/mm3 . Solubility values in water were between -0.43 (0.08) and 0.34 (0.18) µg/mm3 and in artificial saliva between -0.53 (0.07) µg/mm3 and 0.33 (0.2) µg/mm3 . CAD/CAM composite blocks were hydrolytically stable under long-term storage (according to ISO 4949:2009), although not as stable as ceramic. Water sorption of CAD/CAM composite blocks was dependent on the resin-matrix and was influenced by the filler weight %.

Pattern, frequency and causes of dental extraction among children/adolescents Syrian refugees: an observational study.

BACKGROUND: The Syrian conflict has had a massive impact on the dental health of refugees. Dental extraction is a good indicator of socioeconomic position and degree of oral hygiene, however there is a scarcity of evidence in the scientific literature that characterizes the reasons for extraction in refugees. AIMS AND METHODS: The current study looked at the extraction causes and related sociodemographic variables of 322 Syrian refugees (46.3% females, 53.7% males) who were treated in a dental clinic in Zaatari camp (Jordan), from September to December 2019. All child Syrian refugees (aged 4-16) visiting the facility were eligible to participate. A validated semi-structured survey was used to collect clinical and sociodemographic data from the research sample. Chi-square test, Independent sample t-test, and ANOVA test were used to examine associations between the different variables. The significance level was set at P < 0.05. RESULTS: The total number of teeth extracted was 397: 25 (6.3%) permanent teeth, 371 (93.5%) primary teeth, and one mesiodens (0.2%). Overall, lower teeth were most commonly extracted (56.9%). The most common teeth that required extraction were the lower primary molars, with lower left primary second molars being the most commonly extracted (15.9%). As the level of parental education increased, the mean number of extracted teeth decreased (P = 0.035), additionally, as the frequency of toothbrushing increased extractions due to caries decreased significantly (P = 0.027). CONCLUSIONS: Dental caries and pulpal diseases were discovered to be the most prevalent causes for primary and permanent tooth extraction, with no difference between males and females. The lower left primary molar was the most commonly afflicted tooth.

Satisfaction with healthcare services among refugees in Zaatari camp in Jordan.

BACKGROUND: Feedback on satisfaction regarding healthcare services is vital for continuous improvement of the service delivery process and outcome. AIMS AND METHODS: The objective of this study was to assess the satisfaction of refugees with the medical and dental services in Zaatari camp, under 3 domains with 20 key indicators (human and physical health resources, interaction and reactivity, and administration) using a self-administered questionnaire. RESULTS: Of the 500 participants, the satisfaction rate was 72.5%. Young participants and participants with a shorter stay in the camp showed higher overall satisfaction rates (P ≤ 0.01). Within the domains, 'interaction and reactivity' achieved the highest satisfaction score, whereas 'administration efficiency' was ranked the lowest. As for elements within the domains, the most acceptable were the sufficient number of staff and the working hours, availability of radiological services and proper care for children, reasonable waiting time and asking for medical history in every visit. Whereas difficulty to access healthcare services, difficulty to be referred to hospitals, lack of follow up and lack of dental services were the least acceptable. CONCLUSION: In conclusion, whereas refugees were generally satisfied with the provided services, this study indicates that there are areas for further service improvement. This study highlights a significant gaps in healthcare services which if not addressed have the potential to amplify oral/medical health problems.

Prevalence of malocclusion and assessment of orthodontic treatment needs among Syrian refugee children and adolescents: a cross-sectional study.

BACKGROUND: There is a scarcity of data concerning the prevalence and pattern of malocclusion and orthodontic treatment needs in Syrian refugee. In this study, extra and intra-oral features of malocclusion and the dental health component of the Index of Orthodontic Treatment Need (IOTN) were reported. METHODS: Examination of 606 Syrian children/adolescents refugees attending Zaatari clinic was carried out (males = 280, females = 326, mean age = 11.84 ± 2.1 years). Subjects not within the age limit, with a history of orthodontic treatment, or with craniofacial anomalies were excluded. Both extra and intra-oral features of malocclusion were assessed. Intra-oral features included inter- and intra-arch occlusal characteristics: crowding, spacing, crossbite, overjet, overbite, molar and canine relationship, incisor relationship, and centerline shift. In addition, the dental health component (DHC) of the Index of Orthodontic Treatment Need (IOTN) was recorded. Gender and age variations in malocclusion characteristics and IOTN grading were tested using chi-square and nonparametric tests respectively (P < 0.05). RESULTS: The prevalence of malocclusion was 83.8% (52.6% class I, 24.2% class II, 7% class III). The most common features of malocclusion were crowding (71.1%) followed by centerline shift (52.1%), increased overjet (36.1%), high vertical proportions (34%) and deep overbite (31.2%); there were significant gender and age differences for a number of occlusal traits. The prevalence of moderate to severe need for orthodontic treatment was 67.7%. CONCLUSIONS: This study provides baseline data on the prevalence of malocclusion in Syrian refugee children/adolescents in Zaatari camp where data concerning oral health of this population are lacking. The prevalence of orthodontic treatment need was high warranting the need for a comprehensive interceptive orthodontic program to prevent increasing oral health problems in the future. This high burden of oral diseases has a negative financial impact on the hosting country which can be reduced through public health interventions and implementing community-based dental healthcare for this underprivileged population.

Knowledge and awareness of dental implants among Syrian refugees: a cross sectional study in Zaatari camp.

BACKGROUND: The popularity of implant dentistry is increasing dramatically, but the success of implant treatment depends on a patient's knowledge and expectations. METHODS: This study aimed to assess dental implant knowledge among refugees as a treatment option (n = 565), using face-to-face interviews. The frequency distribution of the responses in general and according to age, gender and education was calculated. RESULTS: 81.8% of the interviewees had missing teeth, however, only 26.2% replaced them. 16.6% of participants had never/hardly heard about implants. Females who never heard of implants were more than males (P < 0.001). 51.3% of participants described dental implants as a screw, and only 35.4% knew implants were placed in jawbones. 6.2% of respondents reported that implants required more care than a natural teeth, with 47.6% believing that diseases affect implant success. Friends were the main source of information (61.4%). Highly educated participants showed higher knowledge about implants. CONCLUSIONS: The surveyed sample revealed limited knowledge about dental implants with high cost being a major obstacle, warranting more strategies to increase awareness and to make implants more affordable for this population.

Relationship between dental caries, oral hygiene and malocclusion among Syrian refugee children and adolescents: a cross-sectional study.

BACKGROUND: Little is known about the oral disease burden in refugee children and associated risk factors. This cross-sectional study aimed to explore the oral hygiene status and prevalence of caries, and to investigate their association with malocclusion characteristics in a child refugee population. METHODS: 606 Syrian refugee children and adolescents aged 7-19 years, registered as refugees in Jordan and residing in Zaatari camp, were recruited to the study. Oral hygiene and caries status were recorded using DMFT (mean of decayed, missing, and filled permanent teeth) and OHI-S (Simplified Oral Hygiene Index) according to WHO criteria. Oral health results were then cross tabulated with previously reported malocclusion traits for the same study sample (crowding, spacing, contact point deflection and IOTN) to detect any associations. Statistical analysis was conducted using chi-square test, independent sample t-test, one-way ANOVA, Welch test and Post Hoc testing (Gabriel and Games-Howell). RESULTS: Overall DMFT and OHI-S were 4.32 and 1.33 respectively with no difference between males and females. Around 40% of the sample showed ≥ 5 DMFT score. 96.1% of the sample either do not brush or brush occasionally: females showed better oral hygiene practices (P = 0.002). No significant differences in DMFT scores were noted for gender or age, other than the 7-9.9 year old group having significantly higher mean DMFT scores than all other age groups (P < 0.01);the mean of OHI-S was not significantly different between different age groups (P = 0.927). Subjects with malocclusion, specifically crowding, contact point deflection and IOTN grades 3, 4 and 5 had higher scores in both arches for OHI-S and DMFT than subjects without malocclusion traits, although this was not statistically significant for DMFT scores. Overall, patients with generalized spacing had a significantly lower OHI-S score than those without spacing (P = 0.021). Significant correlations were found between parameters of intra-arch and inter-arch relationships and oral health indices (DMFT and OHI-S). CONCLUSION: Malocclusion may increase the risk of caries and periodontal disease; the magnitude of this risk is amplified in populations with poor oral health and limited access to oral healthcare services, highlighting the need for preventive and curative oral health programs.

A multinational study on the factors influencing university students' attitudes and usage of ChatGPT.

Artificial intelligence models, like ChatGPT, have the potential to revolutionize higher education when implemented properly. This study aimed to investigate the factors influencing university students' attitudes and usage of ChatGPT in Arab countries. The survey instrument "TAME-ChatGPT" was administered to 2240 participants from Iraq, Kuwait, Egypt, Lebanon, and Jordan. Of those, 46.8% heard of ChatGPT, and 52.6% used it before the study. The results indicated that a positive attitude and usage of ChatGPT were determined by factors like ease of use, positive attitude towards technology, social influence, perceived usefulness, behavioral/cognitive influences, low perceived risks, and low anxiety. Confirmatory factor analysis indicated the adequacy of the "TAME-ChatGPT" constructs. Multivariate analysis demonstrated that the attitude towards ChatGPT usage was significantly influenced by country of residence, age, university type, and recent academic performance. This study validated "TAME-ChatGPT" as a useful tool for assessing ChatGPT adoption among university students. The successful integration of ChatGPT in higher education relies on the perceived ease of use, perceived usefulness, positive attitude towards technology, social influence, behavioral/cognitive elements, low anxiety, and minimal perceived risks. Policies for ChatGPT adoption in higher education should be tailored to individual contexts, considering the variations in student attitudes observed in this study.

Willingness to get HPV vaccination among female university students in Kuwait and its relation to vaccine conspiracy beliefs.

A substantial burden of high-risk human papillomavirus (HPV) infections and HPV-related cancers can be mitigated by vaccination. The current study aimed to investigate the willingness of female students at the University of Kuwait to get HPV vaccination and its possible association with general vaccine conspiracy beliefs (VCBs). This cross-sectional survey study was conducted during September-November 2022 using a validated VCB scale as the survey instrument. The final sample comprised 611 respondents with a median age of 22 y and a majority of Arab ethnicity (n = 600, 98.2%). Only 360 respondents (56.9%) heard of HPV before participation and these students showed an above-average level of HPV knowledge (mean knowledge score of 12.7 ± 2.6 out of 16 as the maximum score), of whom only 33 self-reported HPV vaccine uptake (9.2%). The willingness to accept free-of-charge HPV vaccination was seen among 69.8% of the participants, with 20.1% who were hesitant and 10.1% who were resistant. The acceptance of HPV vaccination if payment is required was 23.1%. Reasons for HPV vaccine hesitancy/resistance included complacency to the HPV disease risks, lack of confidence in HPV vaccination, and inconvenience. The embrace of VCBs was associated with significantly higher odds of HPV vaccine hesitancy/resistance. The current study showed the detrimental impact of endorsing vaccine conspiracy beliefs manifested in lower intention to get HPV vaccination among female university students in Kuwait. This should be considered in vaccine promotion efforts aiming to reduce the burden of HPV cancers.

ChatGPT applications in medical, dental, pharmacy, and public health education: A descriptive study highlighting the advantages and limitations.

Since its public release in November 2022, ChatGPT has gained a widespread attention and received mixed responses in the academia. Promising applications of ChatGPT in university education has been suggested; however, several concerns were raised. The aim of this descriptive study was to investigate the pros and cons of ChatGPT use in medical, dental, pharmacy, and public health education. Based on expert panel discussion and review of the existing literature, specific and concise ChatGPT prompts were constructed and the responses were generated on 25 February 2023. Out data suggested that in medical education, ChatGPT benefits included the possibility of improving personalized learning, clinical reasoning and understanding of complex medical concepts. The benefits listed in the context of dental education included improved skills through step- by-step instructions and interactive content, with instant feedback on student techniques. In pharmacy education, the advantages included possible explanations of complex subjects and the deployment of interactive tools aiding to develop skills for patient counselling. In public health education, the listed benefits included providing explanations and case scenarios, besides improved skills in data analysis and literature review. The limitations listed based on ChatGPT-generated content were common across all of the investigated healthcare disciplines and included data privacy issues, risk of generating biased and inaccurate content, and the risk of deterioration of critical thinking and communication skills among healthcare students. The ChatGPT-generated content in the context of healthcare education was deemed partially helpful by the expert panel. However, several important points regarding the pros and cons of ChatGPT use in medical, dental, pharmacy and public health education were missed by ChatGPT- generated content including: the risk of plagiarism, copyright issues, the risk of academic dishonesty, and the lack of personal and emotional interactions necessary for developing proper communication skills in healthcare education. In conclusion, despite the promising prospects of ChatGPT in healthcare education, several drawbacks should be addressed with implementation of guidelines for proper use to ensure exploiting the benefits of this innovative technology.

Palatal Rugae Patterns in Fars, Turkmen, and Sistani Ethnicities in the Eastern Part of the Caspian Littoral of Iran.

In forensic medicine, it is important to identify whole or fragmented bodies. This aim can be particularly challenging in mass disasters. Palatal rugae patterns can be used as a surrogate parameter in forensic medicine. This stems from the difficulty in falsifying these patterns, their resistance to trauma, to decomposition for several days postmortem, and to combustion under high-temperatures, as well as being distinguishable among different races. The present study aimed to analyze the differences in the palatal rugae patterns among three Iranian ethnicities (Fars, Turkmen, and Sistani). This retrospective study involved the use of archived materials. The study casts were selected from the database of patients who visited a private orthodontics clinic. A total of 309 dental casts (103 Fars, 103 Turkmen, and 103 Sistani) were assessed, which belonged to 181 females and 128 males aged between 12 and 30 years (mean: 16.86 ± 3.18 years). The difference in the mean number of palatal rugae in women between the three ethnicities was statistically significant. Also, the differences in the total number of straight rugae were significant between the three ethnic groups. The most common rugae shapes in the three ethnic groups were the straight and wavy shapes. The length of the palatal rugae in the primary and secondary rugae among the study subjects younger than 18-years-old was significantly different between the three ethnic groups. Thus, the present research highlighted the differences in palatal rugae patterns among three Iranian ethnicities. Therefore, palatal rugae can be used in forensic medicine as a complementary approach to human identification.

Pattern, frequency and causes of tooth extraction among adult Syrian refugees.

AIMS OR OBJECTIVES: The Syrian crisis has resulted in a significant impact on refugee oral health status, but the scientific literature lacks information characterizing the pattern of tooth extraction in refugees. MATERIALS AND METHODS: The current study analyzed the pattern of tooth extraction and the associated sociodemographic factors among 626 (53.4% females, 46.6% males) Syrian refugees who were treated in dental clinics in the Zaatari camp. All adult Syrian refugees attending the dental unit at Zaatari camp were eligible to participate. Clinical and sociodemographic data were collected from the study sample using a validated semi-structured survey over a period of 4 months. Descriptive statistics were generated and Chi-square test, independent sample t-test, ANOVA test and Bonferroni Post Hoc test were used to examine associations between the different variables. RESULTS: More than one third of the attendees (33.9%) were young adults (18-29 years), and nearly two thirds (69.8%) had no or very basic education. The mean number of teeth that needed extraction was (1.46 ± 0.84) and was significantly higher in males, smokers, older patients, and those with no or basic education. The most common cause for tooth extraction was dental caries (54.8%), followed by tooth fracture/un-restorability (38.5%), and periodontitis (3.4%); while the least common reason was tooth extraction for orthodontic treatment (0.20%). CONCLUSIONS: Dental caries and its sequelae were the leading cause of tooth extraction in this refugee population. Molar teeth were found to be the most frequently extracted and lower anteriors were the least. Older age, smoking, patients with lower educational level, poor oral hygiene and male gender all predispose to a higher incidence of tooth extractions.

Assessing Health Students' Attitudes and Usage of ChatGPT in Jordan: Validation Study.

BACKGROUND: ChatGPT is a conversational large language model that has the potential to revolutionize knowledge acquisition. However, the impact of this technology on the quality of education is still unknown considering the risks and concerns surrounding ChatGPT use. Therefore, it is necessary to assess the usability and acceptability of this promising tool. As an innovative technology, the intention to use ChatGPT can be studied in the context of the technology acceptance model (TAM). OBJECTIVE: This study aimed to develop and validate a TAM-based survey instrument called TAME-ChatGPT (Technology Acceptance Model Edited to Assess ChatGPT Adoption) that could be employed to examine the successful integration and use of ChatGPT in health care education. METHODS: The survey tool was created based on the TAM framework. It comprised 13 items for participants who heard of ChatGPT but did not use it and 23 items for participants who used ChatGPT. Using a convenient sampling approach, the survey link was circulated electronically among university students between February and March 2023. Exploratory factor analysis (EFA) was used to assess the construct validity of the survey instrument. RESULTS: The final sample comprised 458 respondents, the majority among them undergraduate students (n=442, 96.5%). Only 109 (23.8%) respondents had heard of ChatGPT prior to participation and only 55 (11.3%) self-reported ChatGPT use before the study. EFA analysis on the attitude and usage scales showed significant Bartlett tests of sphericity scores (P<.001) and adequate Kaiser-Meyer-Olkin measures (0.823 for the attitude scale and 0.702 for the usage scale), confirming the factorability of the correlation matrices. The EFA showed that 3 constructs explained a cumulative total of 69.3% variance in the attitude scale, and these subscales represented perceived risks, attitude to technology/social influence, and anxiety. For the ChatGPT usage scale, EFA showed that 4 constructs explained a cumulative total of 72% variance in the data and comprised the perceived usefulness, perceived risks, perceived ease of use, and behavior/cognitive factors. All the ChatGPT attitude and usage subscales showed good reliability with Cronbach α values >.78 for all the deduced subscales. CONCLUSIONS: The TAME-ChatGPT demonstrated good reliability, validity, and usefulness in assessing health care students' attitudes toward ChatGPT. The findings highlighted the importance of considering risk perceptions, usefulness, ease of use, attitudes toward technology, and behavioral factors when adopting ChatGPT as a tool in health care education. This information can aid the stakeholders in creating strategies to support the optimal and ethical use of ChatGPT and to identify the potential challenges hindering its successful implementation. Future research is recommended to guide the effective adoption of ChatGPT in health care education.