RESUMO
BACKGROUND: Transgender men (TM) seeking gender-affirming phalloplasty and transgender women (TW) seeking vaginoplasty and desiring insertive intercourse must consider penis size. Evidence has shown that, at least among cisgender men (CM), penile dimensions tend to be poorly estimated. In transgender patients desiring gender-affirming surgery, inaccuracy in estimation of penis dimensions may lead to unnecessary morbidity: for TW, trauma to the neovagina; for TM with excess girth, an inability to insert. Studies on the accuracy with which transgender and cisgender patients estimate penis size are limited. AIM: To assess the degree of accuracy with which CM and CW, as well as TM and TW, visually estimate the size of the human penis, including length, width, and girth. METHODS: There were 142 participants included (25 TM, 47 TW, 30 CM, and 40 CW; net mean ± SD age, 36.6 ± 11.2 years). Participants were shown these models and asked to estimate length, width, and midshaft girth by visual inspection of 6 realistic models of a penis and scrotum of varying lengths and widths. We evaluated the accuracy of the visual measurements by comparing mean perceived dimensions with the actual dimensions of each model. OUTCOMES: We used a multivariate model of all 3 bias dimensions to test for differences in average bias among gender groups (CM, CW, TM, and TW). RESULTS: TM significantly overestimated length across the longest models. TW significantly overestimated length in the longer 3 models. All groups except for TM significantly underestimated girth in at least 1 model. No groups significantly underestimated width. CM, CW, and TM significantly overestimated width in all 6 models. CLINICAL IMPLICATIONS: When transgender patients use numbers to express penis size (either in neophallus or vaginal depth based on perceived partner size), the result is likely to be larger than expected. Use of realistic penis models as a decision-making tool may help manage patient expectations and surgery decision making preoperatively and improve postoperative patient satisfaction and safety. STRENGTHS AND LIMITATIONS: To our knowledge, this is the first study to assess visual estimation in penis size in TM and CM, as well as TW and CW. The penile models in our study were shown side by side and in the flaccid state despite having dimensions more consistent with an erect penis, which may have influenced estimations across all dimensions. CONCLUSION: Men and women (cisgender and transgender) tend to significantly overestimate penis length and width.
Assuntos
Cirurgia de Readequação Sexual , Pessoas Transgênero , Transexualidade , Masculino , Humanos , Feminino , Adulto , Pessoa de Meia-Idade , Cirurgia de Readequação Sexual/métodos , Transexualidade/cirurgia , Pênis/cirurgia , Satisfação do PacienteRESUMO
AIM: To determine whether post-injury depressive symptoms, and pre-injury major life stressors and genetic factors (HTR1A C(-1019)G alleles; rs6295) are more common in children with mild traumatic brain injury (mTBI) who develop postconcussion syndrome (PCS) symptoms compared with children with asymptomatic mTBI. METHOD: This was a cross-sectional study of 47 symptomatic children (32 males, 15 females; mean age 14y [SD 3y 3mo]) who experienced post-concussive symptoms for 7 or more days and 42 asymptomatic children (26 males 16 females; mean age 13y 6mo [SD 3y 1mo]) after mTBI. Outcome measures were the Postconcussion Symptoms Inventory (PCSI), the Children's Depression Inventory (CDI), standard questionnaire of previous life events, and buccal DNA analysis to determine genotype and allele frequencies for the HTR1A C(-1019)G polymorphism. RESULTS: Depressive symptoms were uncommon. CDI scores did not differ between groups. Allelic and genotypic frequencies for HTR1A C(-1019)G were similar in both groups. Symptomatic children continued to have elevated PCS scores compared with asymptomatic children 1.72 (SD 0.69) years later and had experienced significantly more life stressors (Wald (1)=8.51, p=0.004). INTERPRETATION: HTR1A polymorphisms do not differ in children with PCS. Children who have experienced more significant life stresses are more likely to develop PCS symptoms after mTBI.
Assuntos
Lesões Encefálicas/complicações , Frequência do Gene , Polimorfismo de Nucleotídeo Único , Síndrome Pós-Concussão/etiologia , Receptor 5-HT1A de Serotonina/genética , Estresse Psicológico/complicações , Adolescente , Criança , Estudos Transversais , Cisteína , Feminino , Genótipo , Glicina , Humanos , Acontecimentos que Mudam a Vida , Masculino , Síndrome Pós-Concussão/genética , Fatores de Risco , Inquéritos e QuestionáriosRESUMO
BACKGROUND: The accurate estimation of gestational age by ultrasound is crucial in prenatal care for the monitoring of fetal growth and development. As changes in maternal childbearing age, body habitus, and ultrasound technology occur, previously published formulas may not be accurate for today's population. OBJECTIVE: This study aimed to develop new formulas for calculating the gestational age based on a first-trimester ultrasound scan and to compare the new formulas with preexisting formulas. STUDY DESIGN: This study was a single-center, retrospective observational study that included pregnancies conceived using in vitro fertilization. The pregnancies had known dates of embryo transfer and multiple standard ultrasound examinations in the first trimester of pregnancy. Pregnancies ending with a miscarriage or termination in the first trimester of pregnancy were excluded. A polynomial regression analysis was performed to determine the optimal model that represented the relationship between gestational age and crown-rump length. The models were evaluated using systematic error, random error, absolute difference of the calculated gestational age and actual gestational age, and proportion of estimation within 0 and 2 days of the known gestational age. The optimal model was chosen and compared with preexisting formulas. RESULTS: Overall, 1436 ultrasound results were included in the analysis. The analysis produced 3 models: linear, cubic, and quadratic models with correlation coefficients of 0.968, 0.989, and 0.991, respectively. The cubic formula was superior to the linear and quadratic formulas concerning systematic error, random error, absolute difference, and proportion of estimation within 0 and 2 days. The new formula had a lower systematic error, random error, and mean absolute difference (0.06%, 2.43%, and 0.97 days, respectively) and the highest proportion of estimation within 0 and 2 days (37.4% and 93.5%, respectively) than previously published formulas. CONCLUSION: The formula proposed in this study followed a cubic model and seemed to be able to more accurately estimate gestational age in the first trimester of pregnancy based on crown-rump length compared with previously published formulas.
Assuntos
Ultrassonografia Pré-Natal , Gravidez , Feminino , Humanos , Idade Gestacional , Estatura Cabeça-Cóccix , Ultrassonografia Pré-Natal/métodos , Primeiro Trimestre da Gravidez , Estudos RetrospectivosRESUMO
Rice yields are largely influenced by variability in weather. Here, we demonstrate the effect of weather variables viz., maximum and minimum temperatures, rainfall, morning and evening relative humidity, bright sunshine hours on the yield of rice cv. Swarna, grown across five rice ecologies of India through field experiments during kharif (wet) season (Jun-Sept.). Critical thresholds of weather elements were identified for achieving above average, average and below average yield for each ecology. The investigation could determine how different weather elements individually and collectively affect rice yield in different rice ecosystems of India. While a sudden increase in minimum temperature by 8-10 °C (> 30 °C) during reproductive period resulted in 40-50 per cent yield reduction at Mohanpur, a sudden decrease (< 20 °C) caused yield decline at Dapoli. The higher yields may be attributed to a significant difference in bright sunshine hours between reproductive phases of above-average and below-average yield years (ranging from 2.8 to 7.8 hours during P5 stages and 1.7 to 5.1 during P4 stages). Rice cultivar Swarna performed differently at various sowing dates in a location as well as across locations (6650 kg ha-1 at Dapoli to 1101 kg ha-1 at Samastipur). It was also found that across all locations, the above average yield could be associated with higher range of maximum temperature compared to that of below average yield. Principal component analysis explained 77 per cent of cumulative variance among the variables at first growth stage, whereas 70 per cent at second growth stage followed by 74 per cent and 66 per cent at subsequent growth stages. We found that coastal locations, in contrast to inland ones, could maximize the yield potential of the cultivar Swarna, due to the longer duration of days between panicle initiation to physiological maturity. We anticipate that the location-specific thresholds of weather factors will encourage rice production techniques that are climate resilient.
RESUMO
Introduction Our purpose is to highlight the articulating surfaces between the hamate and fourth and fifth metacarpal (MC) bases of the hand using three- dimensional (3D) laser scanning. This joint surface is used for osteochondral grafting of small joints such as the proximal interphalangeal joint using the hamate articular surface. It is an important joint for hand function and can develop osteoarthritis. Methods NextEngine (NextEngine, Santa Monica, CA) 3D laser scanner (accurate to ±100 µm) was used to capture the articular surfaces of the hamate with the fourth and fifth MC bases of 10 embalmed cadaver right hands. Articular surfaces were defined and modeled using Amira (Visage Imaging, Andover, MA) and MatLab7 (MathWorks, Natick, MA). Articular surfaces were evaluated in terms of size, shape, the radius of curvature (ROC) by three points and sphere-fit (SF) and inter-facet angles. Results In the fourth carpometacarpal (CMC) joint, the hamate articular surface with the 4th MC was single, concave, and well approximated by SF ROC (mean: 11.18 mm). The fourth MC base was convex; SF ROC mean was 9.94 mm. Six of the 10 articulations flattened from volar to dorsal. In the fifth CMC joint, we noted a bicondylar construct. The two hamate surfaces were concave while MC bases were convex. The joint surface was best approximated with two overlapping spheres. Ulnar sphere averaged 30.21% of the surface of the hamate and 29% of the MC base. Ulnar hamate SF ROC mean was 11.63 mm, and ulnar fifth MC SF ROC mean was 8.07 mm. Radial SF hamate mean was 7.92 mm, and the radial fifth MC SF mean was 7.47 mm. The mean of the angle of divergence between the condylar spheres represented on the hamate surface was 21.4°, while that of the fifth MC base angle of divergence was 10.99°. The mean of the angle formed between the fourth and fifth CMC joints at the hamate was 31.69°. A single articular facet between the fourth and fifth MC bases was concave on fourth and convex on the fifth MC base. Conclusions and clinical relevance Laser scanning of cadaver fourth and fifth CMC joints clarified the normal anatomy of the osteochondral joint surface. The topography of the joints was well-approximated by SF with curved surfaces in both the anteroposterior and radial-ulnar planes with the fifth CMC having two unique surfaces for articulation. We noted the distinct radial and ulnar articulating surfaces of the fifth CMC joint, which would permit flexion and limited supination.