Temperature dependence of photoluminescence spectrum of single lead halide perovskite nanocrystals: Effect of size on the phase transition temperature.

Photoluminescence (PL) spectroscopy of individual semiconductor nanocrystals (NCs) is a powerful method for understanding the intrinsic optical properties of these materials. Here, we report the temperature dependence of the PL spectra of single perovskite FAPbBr3 and CsPbBr3 NCs [FA = HC(NH2)2]. The temperature dependences of the PL linewidths were mainly determined by the Fröhlich interaction between excitons and longitudinal optical phonons. For FAPbBr3 NCs, a redshift in the PL peak energy appeared between 100 and 150 K, which was because of the orthorhombic-to-tetragonal phase transition. We found that the phase transition temperature of FAPbBr3 NCs decreases with decreasing NC size.

Exciton-Phonon and Trion-Phonon Couplings Revealed by Photoluminescence Spectroscopy of Single CsPbBr3 Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (NCs) have outstanding photoluminescence (PL) properties and excellent potential for light-emitting diodes and single-photon sources. Here, we report the multiple-peak structures originating from excitons, trions, and biexcitons in low-temperature PL spectra of single CsPbBr3 NCs. We found fine-structure splitting in the PL peaks of bright excitons and biexcitons and also in the longitudinal-optical (LO)-phonon replicas of excitons. LO-phonon replicas of trions are clearly observed under strong photoexcitation, which do not show fine-structure splitting. From size-dependent analyses of these replicas, we clarified that both exciton-phonon and trion-phonon couplings become larger for smaller NCs and the coupling strengths of trions are larger than those of excitons in large NCs. These behaviors can be explained by the spatial distributions of the electron and hole wave functions in the NCs. Our findings provide essential information on electron-phonon couplings in perovskites and for the design of high-purity single-photon sources.

In Situ Control of Crystallinity of 3D Colloidal Crystals by Tuning the Growth Kinetics of Nanoparticle Building Blocks.

Colloidal crystals (CCs) constructed from inorganic nanoparticle (NP) building blocks exhibit properties that cannot be realized from isolated NPs or corresponding bulk counterparts. Because the arrangement of NPs in CCs is crucial in the CC's collective properties, development of a procedure to modulate the assembly of NP constituents is important. We demonstrate rapid formation of nickel (phosphide) CCs with tunable crystallinity through van der Waals force-driven spontaneous self-assembly of NPs in a facile one-pot colloidal synthesis. The quantity of size-regulating reagent (tri-n-octylphosphine) modulates the assembly of NPs from ordered close-packed to a disordered configuration in CCs. Synchrotron-based in situ small-angle X-ray scattering revealed that the size uniformity of the NPs determines the crystallinity of CCs, indicating the importance of regulating the growth kinetics of NPs during the synthesis. Our work will be useful for universal scalable preparation of CCs from a variety of materials and structures, with tunable concerted properties.

Transformations of Ionic Nanocrystals via Full and Partial Ion Exchange Reactions.

ConspectusElaborate chemical synthesis methods allow the production of various types of inorganic nanocrystals (NCs) with uniform shape and size distributions. Many single-step synthesis approaches, such as the reduction of metal ions, the decomposition of metal complexes, double replacement reactions, and hydrolysis, have been adapted to promote the generation of monodisperse metal and ionic NCs. However, the question has become, how can we synthesize NCs with thermodynamically metastable phases or very complex structures? The transformation of already-synthesized NCs via elemental substitutions, such as ion exchange reactions for ionic NCs and galvanic replacement reactions for metal NCs, can overcome the difficulties facing conventional one-step syntheses. In particular, NC ion exchange reactions have been studied with numerous combinations of foreign ions and ionic NCs with various shapes. They have been investigated extensively because the reactions proceed under relatively mild conditions thanks to the large surface-to-volume ratio of the NCs relative to their bulk form. The functionality of the resulting ionic NCs, including semiconducting and plasmonic properties, can be easily tuned in a wide range, from the visible to near-infrared. Because anions generally have much larger ionic radii than cations within the frameworks of NCs, the cation exchange reactions proceed much faster than the anion exchange reactions. For ionic NCs above a critical size, the anion framework remains intact, and the original shape of the parent NCs is retained throughout the cation exchange reaction. In contrast, the anion exchange reaction often provides the new NCs with unique structures, such as hollow or anisotropically phase-segregated assemblies.This Account focuses on the full and partial ion exchange reactions involving ionic NCs, which have been thoroughly investigated by our group and others while highlighting important aspects such as the preservation of appearance and dimensions. First, we discuss how each type of ion exchange reaction progresses to understand the morphologies and crystal structures of their final products. This discussion is supported by emphasizing important examples, which help to explore the formation of NCs with thermodynamically metastable phases and complex structures, and other significant features of the ion exchange reactions leading to structure-specific functions. As a special case, we examine how the shape-dependent anionic framework (surface anion sublattice and stacking pattern) of polyhedral Cu2O NCs determines the crystalline structure of the anion-exchanged products of hollow CuxS NCs. In addition, we review the characteristic anion exchange behavior of metal halide perovskite NCs observed in our laboratory and other laboratories. Finally, a general outline of the transformation of NCs via ion exchange reactions and future prospects in this field are provided.

Luminescence Fine Structures in Single Lead Halide Perovskite Nanocrystals: Size Dependence of the Exciton-Phonon Coupling.

Lead halide perovskite nanocrystals (NCs) have superior photoluminescence (PL) properties, such as high PL quantum yields and wide PL wavelength tunability, for optoelectronic applications. Here, we report the PL spectra of single formamidinium lead halide perovskite FAPbX3 (X = Br, I) NCs examined by single-dot spectroscopy at low temperature. We found four PL peaks in the low-energy region below the strong exciton PL peak that originate from two longitudinal-optical (LO) phonon replicas of the exciton PL, biexcitons, and charged excitons (trions). The binding energies of the biexcitons and trions become larger as the NCs decrease in size. The LO phonon energies show no size dependence, but the Huang-Rhys factors, which reflect the strength of the exciton-phonon coupling, become larger for smaller NCs. Our findings provide important insights into the exciton properties of perovskite NCs.

Reduction of Optical Gain Threshold in CsPbI3 Nanocrystals Achieved by Generation of Asymmetric Hot-Biexcitons.

Lead halide perovskite nanocrystals (NCs) are a class of promising light-emitting materials and have been considered as gain media in lasers. Strong exciton-exciton interactions in NCs cause an energy shift of the lowest optical transition and affect the optical gain threshold. Here, we clarify the dynamics of exciton-exciton interactions in highly photoexcited CsPbI3 NCs by double-pump transient absorption spectroscopy. This method provides control over the population of each excited state by varying the time interval between the two pump pulses. We find that the band-edge energy shift induced by the formation of asymmetric hot-biexcitons (comprising one ground-state exciton and one hot exciton) is smaller than that induced by hot excitons and hot biexcitons in the ensemble. We demonstrate that the generation of asymmetric hot-biexcitons reduces the optical gain threshold in the CsPbI3 NC ensemble.

Effect of A-Site Cation on Photoluminescence Spectra of Single Lead Bromide Perovskite Nanocrystals.

Lead halide perovskite (APbX3) nanocrystals exhibit photoluminescence (PL) with both wide wavelength tunability and high quantum efficiency. While the Pb-X6 octahedra mainly determines the near-band-edge optical properties and the A-site cation affects the structural stability, the role of the A-site cation in determining the optical properties is still unclear. Here, we report the PL properties of three types of lead bromide perovskite APbBr3 nanocrystals with different cations [A = HC(NH2)2+, CH3NH3+, and Cs+], as revealed by single-dot spectroscopy, and discuss the influence of the A-site cation on the PL spectrum. The nanocrystal size dependences of the PL energy and lifetime show no large variation with the species of the A-site cation. We find that the size of the A-site cation determines the coupling strength between electrons and longitudinal-optical phonons in the nanocrystal and thus affects the PL spectral shape, especially the low-energy tail.

Waning-and-waxing shape changes in ionic nanoplates upon cation exchange.

Flexible control of the composition and morphology of nanocrystals (NCs) over a wide range is an essential technology for the creation of functional nanomaterials. Cation exchange (CE) is a facile method by which to finely tune the compositions of ionic NCs, providing an opportunity to obtain complex nanostructures that are difficult to form using conventional chemical synthesis procedures. However, due to their robust anion frameworks, CE cannot typically be used to modify the original morphology of the host NCs. In this study, we report an anisotropic morphological transformation of Cu1.8S NCs during CE. Upon partial CE of Cu1.8S nanoplates (NPLs) with Mn2+, the hexagonal NPLs are transformed into crescent-shaped Cu1.8S-MnS NPLs. Upon further CE, these crescent-shaped NPLs evolve back into completely hexagonal MnS NPLs. Comprehensive characterization of the intermediates reveals that this waxing-and-waning shape-evolution process is due to dissolution, redeposition, and intraparticle migration of Cu+ and S2-. Furthermore, in addition to Mn2+, this CE-induced transformation process occurs with Zn2+, Cd2+ and Fe3+. This finding presents a strategy by which to create heterostructured NCs with various morphologies and compositions under mild conditions.

Resonant tunneling in a colloidal CdS semiconductor quantum-dot single-electron transistor based on heteroepitaxial-spherical Au/Pt nanogap electrodes.

Semiconductor quantum dots (QDs) have unique discrete energy levels determined by the particle size and material. Therefore, they have potential applications as novel optical and electronic devices. Among those, colloidal group II-VI semiconductor quantum dots stand out for their facile synthesis and band gaps aligned with the visible light spectrum. However, the electrical characterization studies of an individual quantum dot necessitate the size of nanogap electrodes being equal to the size of the quantum dot, which has conventionally been evaluated using techniques such as scanning tunneling microscopy (STM) and nanogaps fabricated by electromigration. The complexity of device fabrication has restricted research in this area. Here, we present a pioneering approach for the electrical characterization of single-QD: heteroepitaxial-spherical (HS) Au/Pt nanogap electrodes. We fabricated transistors through chemisorption, an anchoring colloidal CdS QD (3.8 nm) between the HS-Au/Pt nanogap electrodes (gap separation: 4.5 nm). The resulting device functions as a quantum-dot single-electron transistor (QD-SET), showing resonant tunneling-an inherent characteristic of the QD. A steep current increase was observed at a negative voltage, apart from the theoretical single-electron tunneling current by Coulomb blockade phenomena, which agreed with the theoretical resonant tunneling current through a discrete energy level of the QD. This underscores the promise of HS-Au/Pt nanogap electrodes in realizing single-QD devices, offering a pathway toward unlocking their full potential.

Size Dependence of Trion and Biexciton Binding Energies in Lead Halide Perovskite Nanocrystals.

Lead halide perovskite nanocrystals (NCs) have attracted much attention as light-source materials for light-emitting diodes, lasers, and quantum light emitters. The luminescence properties of perovskite NCs and the performance of NC-based light-source devices depend on trion and biexciton dynamics. Here, we examined the size dependence of trion and biexciton binding energies by conducting low-temperature single-dot spectroscopy on three different perovskite NCs: CsPbBr3, CsPbI3, and FAPbBr3. While the photoluminescence spectral widths of the all-inorganic CsPbBr3 and CsPbI3 NCs were narrow, compared with those of the organic-inorganic hybrid FAPbBr3 NCs, the binding energies of trions and biexcitons of all three samples showed similar size dependences, independent of the A-site cation and halogen. The effective-mass approximation calculations implied the importance of dynamical dielectric screening on the formation of trions and biexcitons.

Pseudomorphic amorphization of three-dimensional superlattices through morphological transformation of nanocrystal building blocks.

Nanocrystal (NC) superlattices (SLs) have been widely studied as a new class of functional mesoscopic materials with collective physical properties. The arrangement of NCs in SLs governs the collective properties of SLs, and thus investigations of phenomena that can change the assembly of NC constituents are important. In this study, we investigated the dynamic evolution of NC arrangements in three-dimensional (3D) SLs, specifically the morphological transformation of NC constituents during the direct liquid-phase synthesis of 3D NC SLs. Electron microscopy and synchrotron-based in situ small angle X-ray scattering experiments revealed that the transformation of spherical Cu2S NCs in face-centred-cubic 3D NC SLs into anisotropic disk-shaped NCs collapsed the original ordered close-packed structure. The random crystallographic orientation of spherical Cu2S NCs in starting SLs also contributed to the complete disordering of the NC array via random-direction anisotropic growth of NCs. This work demonstrates that an understanding of the anisotropic growth kinetics of NCs in the post-synthesis modulation of NC SLs is important for tuning NC array structures.

Ultrafast dynamics and single particle spectroscopy of Au-CdSe nanorods.

Time-resolved photoluminescence (PL) and transient absorption (TA) spectroscopy are conducted in order to get knowledge on the excited state of CdSe nanorods (NR), and to assess the impact of Au nanoparticles (NP) on the carrier dynamics of hybrid Au-CdSe NRs. The decay dynamics measured in solution show an increase of non-radiative decay channels in the presence of Au NPs, whose characteristic lifetimes vary from a few ps to tens of ps. The ultrafast electron transfer from CdSe NRs to Au NPs efficiently competes with intraband relaxation dynamics, allowing observation of the hot-electron transfer process. Furthermore, the time-averaged PL decay of CdSe NRs shows a strongly multiexponential feature that was analyzed by single-particle spectroscopy. The PL decay of individual NRs fluctuates in time and is correlated with the PL intensity. We show that the time-averaged decay of bare CdSe NRs is composed of (i) a long lifetime component corresponding to bright CdSe NRs (ON state) and (ii) a short lifetime component corresponding to charged NRs that open additional fast non-radiative channels (OFF state). When Au NPs are attached to CdSe NRs, the ON state PL decays still show a long lifetime component, suggesting that the length of the NRs may hinder electron transfer if the exciton is formed far from the Au NPs. Finally, quantitative analysis of the OFF state decays shows that electron transfer occurs even in the presence of fast non-radiative pathways in charged systems.

Location-selective immobilisation of single-atom catalysts on the surface or within the interior of ionic nanocrystals using coordination chemistry.

Single-atom catalysts dispersed on support materials show excellent heterogeneous catalytic properties that can be tuned using the interactions between the single atoms and the support. Such interactions depend on whether the single atoms are located on the surface or within the interior of the support. However, little is known about immobilising single atoms on the surface or within the interior of supports deliberately and selectively. Herein, such location-selective placement of single atoms is achieved through the choice of metal complex precursor, solvent, and workup procedure. Using CdSe nanoplatelets as a support, a cis-[PtCl2(SO(CH3)2)2] precursor in an aprotic solvent exclusively attaches single Pt atoms on the surface of the support. In contrast, a [PtCl4]2- precursor in a protic solvent followed by amine treatment places 60% of the single Pt atoms inside the support by cation substitution. The surface-adsorbed single Pt atoms show higher stability in photocatalytic hydrogen evolution than the substituted ones, and the preclusion of substitution as internal Pt maximises the activity. Thus, this study provides a viable strategy for the structurally precise synthesis and design of single-atom catalysts.

Large-scale synthesis of high-quality metal sulfide semiconductor quantum dots with tunable surface-plasmon resonance frequencies.

High-quality CdS and Cu(7)S(4) quantum dots (QDs) were synthesized with N,N-dibutylthiourea (DBTU) as an organic sulfur source. In this method, nucleation and growth reactions were controlled simply by the heating rate of the reaction. The mild oxidation conditions gave monodisperse CdS QDs exhibiting pure band-edge emission with relatively high photoluminescence quantum yield. During the synthesis of Cu(7)S(4) QDs, the addition of dodecanethiol to the reaction system controlled the reaction rate to give monodisperse spherical or disk-shaped QDs. A hundred-gram scale of copper precursor could be used to generate the high-quality Cu(7)S(4) QDs, indicating that an industrial-scale reaction is achievable with our method. As observed in anisotropic noble-metal nanocrystals, larger disk-shaped Cu(7)S(4) QDs showed lower localized-surface-plasmon resonance energy in the near-infrared region. The disk-shaped Cu(7)S(4) QDs could be used effectively as templates to form cation-exchanged monodisperse disk-shaped CdS QDs.

Bridging electrocatalyst and cocatalyst studies for solar hydrogen production via water splitting.

Solar-driven water-splitting has been considered as a promising technology for large-scale generation of sustainable energy for succeeding generations. Recent intensive efforts have led to the discovery of advanced multi-element-compound water-splitting electrocatalysts with very small overpotentials in anticipation of their application to solar cell-assisted water electrolysis. Although photocatalytic and photoelectrochemical water-splitting systems are more attractive approaches for scaling up without much technical complexity and high investment costs, improving their efficiencies remains a huge challenge. Hybridizing photocatalysts or photoelectrodes with cocatalysts has been an effective scheme to enhance their overall solar energy conversion efficiencies. However, direct integration of highly-active electrocatalysts as cocatalysts introduces critical factors that require careful consideration. These additional requirements limit the design principle for cocatalysts compared with electrocatalysts, decelerating development of cocatalyst materials. This perspective first summarizes the recent advances in electrocatalyst materials and the effective strategies to assemble cocatalyst/photoactive semiconductor composites, and further discusses the core principles and tools that hold the key in designing advanced cocatalysts and generating a deeper understanding on how to further push the limits of water-splitting efficiency.

Spontaneous formation of wurzite-CdS/zinc blende-CdTe heterodimers through a partial anion exchange reaction.

Ion exchange of ionic semiconductor nanoparticles (NPs) is a facile method for the synthesis of type-II semiconductor heterostructured NPs with staggered alignment of band edges for photoelectric applications. Through consideration of the crystallographic orientation and strain at the heterointerface, well-designed heterostructures can be constructed through ion exchange reactions. Here we report the selective synthesis of anisotropically phase-segregated cadmium sulfide (CdS)/ cadmium telluride (CdTe) heterodimers via a novel anion exchange reaction of CdS NPs with an organic telluride precursor. The wurtzite-CdS/zinc blende-CdTe heterodimers in this study resulted from spontaneous phase segregation induced by the differences in the crystal structures of the two phases, accompanying a centrosymmetry breaking of the spherical CdS NPs. The CdS/CdTe heterodimers exhibited photoinduced spatial charge separation because of their staggered band-edge alignment.

Determinants of crystal structure transformation of ionic nanocrystals in cation exchange reactions.

Changes in the crystal system of an ionic nanocrystal during a cation exchange reaction are unusual yet remain to be systematically investigated. In this study, chemical synthesis and computational modeling demonstrated that the height of hexagonal-prism roxbyite (Cu1.8S) nanocrystals with a distorted hexagonal close-packed sulfide anion (S2-) sublattice determines the final crystal phase of the cation-exchanged products with Co2+ [wurtzite cobalt sulfide (CoS) with hexagonal close-packed S2- and/or cobalt pentlandite (Co9S8) with cubic close-packed S2-]. Thermodynamic instability of exposed planes drives reconstruction of anion frameworks under mild reaction conditions. Other incoming cations (Mn2+, Zn2+, and Ni2+) modulate crystal structure transformation during cation exchange reactions by various means, such as volume, thermodynamic stability, and coordination environment.

Strong spin-orbit coupling inducing Autler-Townes effect in lead halide perovskite nanocrystals.

Manipulation of excitons via coherent light-matter interaction is a promising approach for quantum state engineering and ultrafast optical modulation. Various excitation pathways in the excitonic multilevel systems provide controllability more efficient than that in the two-level system. However, these control schemes have been restricted to limited control-light wavelengths and cryogenic temperatures. Here, we report that lead halide perovskites can lift these restrictions owing to their multiband structure induced by strong spin-orbit coupling. Using CsPbBr3 perovskite nanocrystals, we observe an anomalous enhancement of the exciton energy shift at room temperature with increasing control-light wavelength from the visible to near-infrared region. The enhancement occurs because the interconduction band transitions between spin-orbit split states have large dipole moments and induce a crossover from the two-level optical Stark effect to the three-level Autler-Townes effect. Our finding establishes a basis for efficient coherent optical manipulation of excitons utilizing energy states with large spin-orbit splitting.

Drastic structural transformation of cadmium chalcogenide nanoparticles using chloride ions and surfactants.

In the present work, we studied a unique and facile method for the drastic structural transformation of hydrophobic small CdE (E = S, Se, Te) nanoparticles into large, high-quality pencil-shaped nanoparticles through an Ostwald ripening process induced by Cl(-) and surfactants (oleic acid and oleylamine). This study revealed that Cl(-) is the effective anion for the controlled structural transformation of CdE nanoparticles. This transformation reaction can be readily extended to the formation of various functional materials.

Self-activated Rh-Zr mixed oxide as a nonhazardous cocatalyst for photocatalytic hydrogen evolution.

Efficient, robust and environmentally friendly cocatalysts for photocatalysts are important for large-scale solar hydrogen production. Herein, we demonstrate that a Rh-Zr mixed oxide is an efficient cocatalyst for hydrogen evolution. Impregnation of Zr and Rh precursors (Zr/Rh = 5 wt/wt%) formed RhZrO x cocatalyst particles on Al-doped SrTiO3, which exhibited 31× higher photocatalytic water-splitting activity than a RhO x cocatalyst. X-ray photoelectron spectroscopy proved that the dissociation of Cl- ions from preformed Rh-Cl-Zr-O solid led to formation of the active phase of RhZrO x , in which the Zr/Rh ratio was critical to high catalytic activity. Additional CoO x loading as an oxygen evolution cocatalyst further improved the activity by 120%, resulting in an apparent quantum yield of 33 (±4)% at 365 nm and a long durability of 60 h. Our discovery could help scale up photocatalytic hydrogen production.