Construction and commissioning of mid-infrared self-amplified spontaneous emission free-electron laser at compact energy recovery linac.

The mid-infrared range is an important spectrum range where materials exhibit a characteristic response corresponding to their molecular structure. A free-electron laser (FEL) is a promising candidate for a high-power light source with wavelength tunability to investigate the nonlinear response of materials. Although the self-amplification spontaneous emission (SASE) scheme is not usually adopted in the mid-infrared wavelength range, it may have advantages such as layout simplicity, the possibility of producing a single pulse, and scalability to a short-wavelength facility. To demonstrate the operation of a mid-infrared SASE FEL system in an energy recovery linac (ERL) layout, we constructed an SASE FEL setup in cERL, a test facility of the superconducting linac with the ERL configuration. Despite the adverse circumstance of space charge effects due to the given boundary condition of the facility, we successfully established the beam condition at the undulators and observed FEL emission at a wavelength of 20 µm. The results show that the layout of cERL has the potential for serving as a mid-infrared light source.

Formation of Highly Pure and Patterned Carbon Nanotube Films on a Variety of Substrates by a Wet Process Based on Light-Induced Dispersibility Switching.

A simple fabrication method for patterned carbon nanotube (CNT) films is presented, using the concept of light-induced dispersibility switching with a photoresponsive dispersant. A comparison with other dispersants highlights the important role played by an azobenzene-derived cationic molecule as a photoisomerizable dispersant in the successful manufacture of patterned CNT films. Upon UV irradiation for a short time (∼0.5 min), a dispersion composed of CNTs and photoresponsive dispersant exhibited a dispersibility change due to the photoisomerization of the photoresponsive dispersant, and then the dispersant detached-CNT deposited onto the substrate. Our method enables patterned CNT films to be obtained directly from CNT dispersions onto various substrates such as glass, polyethylene terephthalate, and silicone rubber, expanding the possible applications of CNT films. Furthermore, the process minimizes the amount of the residual dispersant in the fabricated CNT film, reducing the amount of impurities, and improving the quality of the patterned CNT film.

Lithium ion effect on electron injection from a photoexcited coumarin derivative into a TiO2 nanocrystalline film investigated by visible-to-IR ultrafast spectroscopy.

The dynamics of ultrafast electron injection from a coumarin derivative (NKX-2311), which is an efficient photosensitizer for dye-sensitized solar cells, into the conduction band of TiO(2) nanocrystalline films have been investigated by means of femtosecond transient absorption spectroscopy in a wide wavelength range from 600 nm to 10 mum. In the absence of Li(+) ions, electron injection into the TiO(2) conduction band occurred in about 300 fs. In the presence of Li(+) ions, however, electron injection occurred within approximately 100 fs, and the oxidized dye generated was found to interact with nearby Li(+) ions. Possible positions of Li(+) ion attachment to the dye molecule were examined by means of semiempirical molecular orbital calculations. The electron injection efficiency was found to increase by a factor of 1.37 in the presence of Li(+) ions. The effects of Li(+) ions on the energy of the TiO(2) conduction band and the electronic interaction between the dye molecule and Li(+) ions are discussed, and the major cause for the acceleration of electron injection was suggested to be a conduction-band shift of TiO(2).

Oligothiophene-containing coumarin dyes for efficient dye-sensitized solar cells.

We have developed oligothiophene-containing coumarin dyes fully functionalized for dye-sensitized nanocrystalline TiO(2) solar cells (DSSCs). DSSCs based on the dyes gave good performance in terms of incident photon-to-current conversion efficiency (IPCE) in the range of 400-800 nm. A solar energy-to-electricity conversion efficiency (eta) of 7.4% was obtained with a DSSC based on 2-cyano-3-[5'-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)-[2,2']bithiophenyl-5-yl]acrylic acid (NKX-2677) under simulated AM 1.5G irradiation (100 mW cm(-2)) with a mask: short-circuit current density (J(sc)) = 13.5 mA cm(-2); open-circuit voltage (V(oc)) = 0.71 V; fill factor (FF) = 0.77. Transient absorption spectroscopy measurements indicated that electron injection from NKX-2677 to the conduction band of TiO(2) is very rapid (<100 fs), which is much faster than the emission lifetime of the dye (1.0 ns), giving a highly efficient electron injection yield of near unity.

Site-selective dye deposition on microstructures of fused silica fabricated using the LIBWE method.

Using laser-induced backside wet etching (LIBWE) technique, microstructures were fabricated onto the surface of fused silica plates, which were pre-coated with self-assembled monolayers (SAMs). Dye molecules and proteins were alternately deposited onto the laser-irradiated or non-irradiated areas by either chemical bonding or physical adsorption.

Generation and characterization of highly strained dibenzotetrakisdehydro[12]- and dibenzopentakisdehydro[14]annulenes.

To generate dibenzotetrakisdehydro[12]- and dibenzopentakisdehydro[14]annulenes ([12]- and [14]DBAs) having a highly deformed triyne moiety, [4.3.2]propellatriene-anneleted dehydro[12]- and dehydro[14]annulenes were prepared as their precursors. UV irradiation of the precursors resulted in the photochemical [2 + 2] cycloreversion to generate the strained [12]- and [14]DBAs, respectively. The [12]DBA was not detected by 1H NMR spectroscopy, but it was intercepted as Diels-Alder adducts in solution, suggesting its intermediacy. Its spectroscopic characterization was successfully carried out by UV-vis spectroscopy in a 2-methyltetrahydrofuran (MTHF) glass matrix at 77 K and by FT-IR spectroscopy in an argon matrix at 20 K. On the other hand, the [14]DBA was stable enough for observation by 1H and 13C NMR spectra in solution, though it was not isolated because of the low efficiency of the cycloreversion. The [14]DBA was also characterized by interception as Diels-Alder adducts in solution and by UV-vis spectroscopy in a MTHF glass matrix at 77 K. The kinetic stabilities of the DBAs are compared with the related dehydrobenzoannulenes with respect to the topology of the pi-systems. In addition, the tropicity of the [14]DBA is discussed based on its experimental and theoretical 1H NMR chemical shifts.

Ketene formation in benzdiyne chemistry: ring cleavage versus Wolff rearrangement.

In the chemistry toward generating benzdiyne from five benzenetetracarboxylic dianhydride derivatives, ketene formation was exclusively observed in the photolysis of difluorobenzenetetracarboxylic dianhydride in a nitrogen matrix at 13 K. Two ketenes were formed concomitantly with difluorobenzdiyne. These ketenes were identified on the basis of good agreement between the observed and calculated (B3LYP/6-31G level) IR spectra. Neither ketene contained the five-membered-ring moiety as cyclopentadienylideneketene, which is formed by Wolff rearrangement in the benzyne chemistry. The first generated ketene was assigned to a ketene with a cyclopropene moiety, and the second, to a ketene with a butadiyne moiety. The first generated ketene was a major product in the photolysis and was formed by cleavage of the bond connecting the ketene group and the C-F carbon and not the bond connecting the ketene group and the carbene moiety. Thus the structures of these ketenes indicated that a unprecedented ring cleavage, rather than Wolff rearrangement, is the dominant process in the benzdiyne chemistry.

Substituent effects on benzdiyne: a density functional theory study.

Density functional theory (DFT) studies were performed to investigate the effect of substituents on the properties of benzdiyne derivatives. Twelve substituted benzdiynes-C(6)X(2), where X = F, Cl, Br, Me, CF(3), CN, OH, NO(2), NH(2), OMe, NMe(2), and Ph-were considered along with the unsubstituted 1,4-benzdiyne. The structures, vibrational frequencies, and IR intensities of these benzdiynes were studied with a popular three-parameter hybrid density functional (B3LYP) combined with the split-valence 6-31G(d) basis set and Dunning's correlation-consistent polarized triple-zeta (cc-pVTZ) basis set. The relative stabilities of the substituted benzdiynes were studied with the help of reaction energies of isodesmic reactions, which showed that the electron-withdrawing groups destabilized the benzdiynes more than they did the corresponding benzenes, whereas the electron-donating groups stabilized the benzdiynes more than they did their benzene counterparts. Correlation analyses revealed that field/inductive effects played a more important role than did resonance effects. The changes in atomic charges and spin populations due to the substituents were also studied. The asymmetric nu(Ctbd1;C) stretching modes obtained were close to the 1500-cm(-)(1) mark. Reinvestigation of the experimental results supported these results; a weak IR band at 1486 cm(-)(1) was assigned to this asymmetric stretching mode in C(6)(CF(3))(2) F. Some other benzdiynes also had large IR intensity values for their asymmetric nu(Ctbd1;C) vibrational modes due to the coupling with other vibrational modes. Heats of formation for the substituted benzdiynes were obtained from the reaction energies calculated at the B3LYP/cc-pVTZ level of theory.

Benzdiynes (1,2,4,5-tetradehydrobenzenes): direct observation by wavelength-selective photolyses of benzenetetracarboxylic dianhydrides in low-temperature nitrogen matrixes.

Toward direct observation of benzdiynes, we investigated the wavelength-selective photolyses of five kinds of benzenetetracarboxylic dianhydride derivatives in nitrogen matrixes at 13 K. In the first step of the photolyses, all dianhydrides were converted into benzynedicarboxylic anhydrides with loss of CO and CO2 upon irradiation at 308 nm. In the second step, the benzyne intermediates were photolyzed at 266 nm. In these photolyses, the generation of two kinds of benzdiynes, 3,6-difluoro-1,4-benzdiyne and 3,6-bis(trifluoromethyl)-1,4-benzdiyne, was confirmed by good correspondence between observed and calculated IR spectra. These benzdiynes were converted into the corresponding hexatriynes upon further irradiation at 266 nm. Benzdiynes were not observed in the photolyses of the other three dianhydrides: only hexatriynes were observed as major photoproducts. These results suggested that benzdiynes were generated first and then converted into hexatriynes and that the efficiency of the decomposition of benzdiynes depended on the substituents. The dynamics of the generation and decomposition of benzdiynes in the matrixes was analyzed by using a successive reaction scheme.

Pi-extended o-quinoidal tropone derivatives: experimental and theoretical studies of naphtho[2,3-c]tropone and anthro[2,3-c]tropone.

pi-Extended o-quinoidal tropone derivatives, naphtho[2,3-c]tropone (3) and anthro[2,3-c]tropone (4), have been investigated theoretically as well as experimentally. The geometrical optimization of 3,4 and related compounds at the B3LYP level employing 6-31G* basis set as well as the GIAO calculations at the RHF level employing the 6-31+G* basis set have been performed to evaluate the contributions of the polarized resonance forms to these molecules. The GIAO calculated NICS(1) values indicate that the aromaticities of the tropone rings of o-quinoidal 3 and 4 are significantly increased as compared with that of parent tropone (1) at the expense of the fused benzenoid rings, consistent with the significant electronic polarization of these molecules in the ground state. On the other hand, the fusion of a benzene or naphthalene ring to the 2,3- or 4,5-position of tropone leads to diminution of aromaticity in the resulting tropone moiety. Experimentally, irradiation of 6,7-(2',3'-naphtho)bicyclo[3.2.0]hepta-3,6-dien-2-one (10) in a rigid glass at -196 degrees C leads to the formation of, which exhibits a characteristic UV-Vis absorption extending to 700 nm and undergoes rapid [pi 12 + pi 14] dimerization upon thawing the glass. In contrast, 6,7-(2',3'-anthro)bicyclo[3.2.0]hepta-3,6-dien-2-one (11) showed no sign of isomerization to 4 under the same reaction conditions.

Fabrication of microarrays on fused silica plates using the laser-induced backside wet etching method.

A novel approach in the fabrication of microarrays of dye and protein on fused silica plates using the laser-induced backside wet etching (LIBWE) technique is described. The surface of fused silica plates was initially precoated using trimethoxysilane self-assembled monolayers (SAMs) and then etched using the LIBWE method to obtain the desired microstructures on the plate surface. Using this technique, the SAMs on the nonirradiated areas were able to survive the LIBWE process and were used as templates for the subsequent deposition of dye molecules or proteins via chemical bonding or physical adsorption. In the case of fused silica plates precoated with fluorinated SAMs, the LIBWE method is used to remove the SAMs to expose the etched silica surfaces, on which a thin layer of pyranine molecules can be site-selectively deposited using an aqueous solution of pyranine. In another application, an ethanol solution of rhodamine 6G was preferentially deposited onto the nonirradiated areas. In yet another application, bovine serum albumin was preferentially deposited onto the laser-irradiated areas; in this case, the fused silica plates were precoated with poly(ethylene oxide) SAMs. Interestingly, when an aqueous suspension of polystyrene (PS) microbeads was cast onto the fused silica precoated with the fluorinated SAMs, hexagonally close-packed PS microbeads were deposited into the etched cavities. Depositions of the dye, protein, and microbeads were confirmed by visualization using a fluorescence microscope and scanning electron microscope.

Generation and characterization of highly strained dibenzotetrakisdehydro[12]annulene.

We report here the generation of tetrakisdehydro[12]annulene possessing a highly deformed triyne component from the [4.3.2]propellatriene-annelated precursor by its photolysis extruding indan and the characterization of the highly reactive annulene by chemical and spectroscopic methods. In addition to the chemical evidence for the formation of the title compound in solution such as interception as a Diels-Alder adduct, we succeeded in its characterization by UV-vis and FTIR spectra in an argon matrix at 20 K. The experimental IR spectrum agreed well with the theoretical one calculated by the DFT method.

Generation and photoreactions of 2,4,6-trinitreno-1,3,5-triazine, a septet trinitrene.

We have studied the matrix photolysis of 2,4,6-triazido-1,3,5-triazine (cyanuric triazide, 1). Stepwise generation of the corresponding mononitrene, dinitrene, and trinitrene was observed by matrix IR and electron paramagnetic resonance (EPR) spectroscopy. The generated species were identified by comparison of their matrix IR spectra with density functional theory (DFT) computational results. The generation of 2,4,6-trinitreno-1,3,5-triazine with a septet ground state was confirmed for the first time by matrix EPR spectroscopy. The trinitrene readily decomposed into three NCN molecules upon further photoirradiation. This process was also confirmed by matrix EPR spectroscopy.