Strong Substrate Mediation of Attractive Lateral Interactions of CO on Cu(110).

The mechanism of chemical reactions between adsorbed species is defined by the combined effects of the adsorbate-substrate potential landscape and lateral interactions. Such lateral interactions are therefore integral to catalytic processes, but their study is often complicated by "substrate mediation", the regulation of a two-body potential between adsorbed particles by the surface itself. Substrate mediation can influence the sign and magnitude of lateral interactions. There are notable exceptions of ordered structures forming at low coverage, indicative of short-range attractive forces where repulsive forces are expected to dominate, suggesting a strong substrate-mediated contribution. To explore further the origins of such interactions, we have investigated the adsorption of CO on Cu(110) using a combination of low-temperature microscopy and first-principles calculations. Our studies reveal that lateral adsorbate interactions, which are constrained by the metal surface, regulate the bonding between the adsorbate and substrate. Anisotropic CO-CO coupling is seen to arise from a perfect balance between the intermolecular accumulation of charge that acts as a glue (chemical coupling) at sufficiently large distances to avoid repulsive effects (dipole-dipole coupling and Pauli's repulsion between electron clouds).

On-Demand Final State Control of a Surface-Bound Bistable Single Molecule Switch.

Modern electronic devices perform their defined action because of the complete reliability of their individual active components (transistors, switches, diodes, and so forth). For instance, to encode basic computer units (bits) an electrical switch can be used. The reliability of the switch ensures that the desired outcome (the component's final state, 0 or 1) can be selected with certainty. No practical data storage device would otherwise exist. This reliability criterion will necessarily need to hold true for future molecular electronics to have the opportunity to emerge as a viable miniaturization alternative to our current silicon-based technology. Molecular electronics target the use of single-molecules to perform the actions of individual electronic components. On-demand final state control over a bistable unimolecular component has therefore been one of the main challenges in the past decade (1-5) but has yet to be achieved. In this Letter, we demonstrate how control of the final state of a surface-supported bistable single molecule switch can be realized. On the basis of the observations and deductions presented here, we further suggest an alternative strategy to achieve final state control in unimolecular bistable switches.

Formation of bioinorganic complexes by the corrosive adsorption of (S)-proline on Ni/Au(111).

Nickel nanoparticles modified by the adsorption of chiral amino acids are known to be effective enantioselective heterogeneous catalysts. The leaching of nickel by amino acids has a number of potential effects including the induction of chirality in the nickel atoms left behind in the nanoparticle and the creation of catalytically active nickel complexes. The adsorption of (S)-proline onto Au(111) precovered by two-dimensional nickel nanoclusters was investigated by scanning tunneling microscopy, X-ray photoelectron spectroscopy, and high-resolution electron energy loss spectroscopy. Adsorption of (S)-proline at 300 K resulted in the corrosion of the nickel clusters, the oxidation of the leached nickel, and the on-surface formation of bioinorganic complexes, which are concluded to contain three prolinate species in an octahedral arrangement around the central Ni ion. Two distinguishable forms of nickel prolinate complexes were identified. One form self-assembles into 1-D chains, and the other form gives rise to porous 2-D islands. Octahedral complexes of the type M(AB)3 are intrinsically chiral, resulting in two pairs of enantiomers. The mirror symmetry of each pair of enantiomers is broken when, as in this study, the bidentate ligand itself possesses a chiral center. DFT calculations are used to examine the relative energies of each Ni(prolinate)3 complex as isolated gas phase species and isolated adsorbed species.

New class of metal bound molecular switches involving H-tautomerism.

A potential end-point in the miniaturization of electronic devices lies in the field of molecular electronics, where molecules perform the function of single components. To date, hydrogen tautomerism in unimolecular switches has been restricted to the central macrocycle of porphyrin-type molecules. The present work reveals how H-tautomerism is the mechanism for switching in substituted quinone derivatives, a novel class of molecules with a different chemical structure. We hence reveal that the previous restrictions applying to tautomeric molecular switches bound to a surface are not valid in general. The activation energy of switching in a prototypical quinone derivative is determined using inelastic electron tunneling. Through computational modeling, we show that the mechanism underlying this process is tautomerization of protons belonging to two amino groups. This switching property is retained upon functionalization by the addition of side groups, meaning that the switch can be chemically modified to fit specific applications.

Construction of an Internally B3 N3 -Doped Nanographene Molecule.

The synthesis of a hexa-peri-hexabenzocoronene (HBC) with a central borazine core is described. The solid-state structure of this BN-doped HBC (BN-HBC) is isotypic with that of the parent HBC. Scanning tunneling microscopy shows that BN-HBC lies flat on Au(111) in a two-dimensional pattern.

Assembly of a chiral amino acid on an unreactive surface: (S)-proline on Au(111).

The adsorption of (S)-proline on Au(111) at 300 K was studied by low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and high resolution electron energy loss spectroscopy. (S)-proline adsorbs to produce a 2-D gas phase at 300 K, which can be condensed to form ordered molecular assemblies on cooling to 77 K. The chemical nature of the self-assembled structures is discussed in light of the information provided by photoelectron and vibrational spectroscopies.

Size-selective carbon nanoclusters as precursors to the growth of epitaxial graphene.

The nucleation and growth mechanisms of graphene on Rh(111) via temperature-programmed growth of C(2)H(4) are studied by scanning tunneling microscopy and spectroscopy, and by density functional theory calculations. By combining our experimental and first-principles approaches, we show that carbon nanoislands form in the initial stages of graphene growth, possessing an exclusive size of seven honeycomb carbon units (hereafter labeled as 7C(6)). These clusters adopt a domelike hexagonal shape indicating that bonding to the substrate is localized on the peripheral C atoms. Smoluchowski ripening is identified as the dominant mechanism leading to the formation of graphene, with the size-selective carbon islands as precursors. Control experiments and calculations, whereby coronene molecules, the hydrogenated analogues of 7C(6), are deposited on Rh(111), provide an unambiguous structural and chemical identification of the 7C(6) building blocks.

Surface Confined Hydrogenation of Graphene Nanoribbons.

On-surface synthesis with designer precursor molecules is considered an effective method for preparing graphene nanoribbons (GNRs) of well-defined widths and with tunable electronic properties. Recent reports have shown that the band gap of ribbons doped with heteroatoms (such as boron, nitrogen, and sulfur) remains unchanged in magnitude in most cases. Nevertheless, theory predicts that a tunable band gap may be engineered by hydrogenation, but experimental evidence for this is so far lacking. Herein, surface-confined hydrogenation studies of 7-armchair graphene nanoribbons (7-AGNRs) grown on Au(111) surfaces, in an ultrahigh vacuum environment, are reported. GNRs are first prepared, then hydrogenated by exposure to activated hydrogen atoms. High resolution electron energy loss spectroscopy (HREELS) and scanning tunneling microscopy (STM) images reveal a self-limited hydrogenation process. By means of a combination of bond-resolved scanning tunneling microscopy (BRSTM) imaging and tip-induced site-specific dehydrogenation, the hydrogenation mechanism is studied in detail, and density-functional theory (DFT) calculation methods are used to complement the experimental findings. In all cases, the results demonstrate the successful modification of the electronic properties of the GNR/Au(111) system by edge and basal-plane hydrogenation, and a mechanism for the hydrogenation process is proposed.

Electrodeposition of palladium onto a pyridine-terminated self-assembled monolayer.

The electrodeposition of Pd onto self-assembled monolayers (SAMs) of 3-(4-pyridine-4-ylphenyl)propane-1-thiol on Au(111) has been investigated by scanning tunneling microscopy. Two schemes are compared: One involves an established two-step procedure where Pd(2+) ions are first coordinated to the pyridine moieties and subsequently reduced in Pd(2+)-free electrolyte. The second deposition routine involves electroreduction in an electrolyte containing low concentration of Pd(2+) which merges both steps and, thus, significantly simplifies metal deposition onto pyridine-terminated SAMs. Both strategies produce identical Pd nanoparticles (NPs) which exhibit a narrow size distribution and an apparent STM height of ∼2.4 nm. The observation of a Coulomb blockade and easy displacement of the nanoparticles in STM experiments evidence deposition on top of the SAM. The NPs are concluded to be essentially spherical. Growth of the NPs is found to be self-limiting since repeating the complexation-deposition cycle increases the density of the nanoparticles rather than their size but only close to full coverage. At high concentration of the Pd(2+) electrolyte, deposition on top of the SAM is impeded by a competitive mushroom-type growth.

Li@C60 as a multi-state molecular switch.

The field of molecular electronics aims at advancing the miniaturization of electronic devices, by exploiting single molecules to perform the function of individual components. A molecular switch is defined as a molecule that displays stability in two or more states (e.g. "on" and "off" involving conductance, conformation etc.) and upon application of a controlled external perturbation, electric or otherwise, undergoes a reversible change such that the molecule is altered. Previous work has shown multi-state molecular switches with up to four and six distinct states. Using low temperature scanning tunnelling microscopy and spectroscopy, we report on a multi-state single molecule switch using the endohedral fullerene Li@C60 that displays 14 molecular states which can be statistically accessed. We suggest a switching mechanism that relies on resonant tunnelling via the superatom molecular orbitals (SAMOs) of the fullerene cage as a means of Li activation, thereby bypassing the typical vibronic excitation of the carbon cage that is known to cause molecular decomposition.

Adsorption of a dihydro-TTF derivative on Au(111) via a thiolate complex bonding to gold adatoms.

A dihydro-TTF derivative with four acetyl-protected thiol ligands was synthesised and adsorbed on Au(111) under UHV conditions. Scanning Tunnelling Microscopy (STM) and Infrared (IR) spectroscopy show that self-organised structures are formed following annealing to 333 K, with each pair of bidentate thiolate ligands bonding to a single gold adatom in a S-Auad-S complex. Due to the lack of a direct orbital overlap between the dihydro-TTF moieties and the surface, relatively little charge transfer between TAT-TTF and the gold surface occurs.

Coupling epitaxy, chemical bonding, and work function at the local scale in transition metal-supported graphene.

Resonance tunneling spectroscopy and density functional theory calculations are employed to explore local variations in the electronic surface potential of a single graphene layer grown on Rh(111). A work function modulation of 220 meV is experimentally measured, indicating that the chemical bonding strength varies significantly across the supercell of the Moiré pattern formed when graphene is bonded to Rh(111). In combination with high-resolution images, which provide precise knowledge of the local atomic registry at the carbon-metal interface, we identify experimentally, and confirm theoretically, the atomic configuration of maximum chemical bonding to the substrate. Our observations are at odds with reported trends for other transition metal substrates. We explain why this is the case by considering the various factors that contribute to the bonding at the graphene/metal interface.

Observation of all the intermediate steps of a chemical reaction on an oxide surface by scanning tunneling microscopy.

By means of high-resolution scanning tunneling microscopy (STM), we have revealed unprecedented details about the intermediate steps for a surface-catalyzed reaction. Specifically, we studied the oxidation of H adatoms by O(2) molecules on the rutile TiO(2)(110) surface. O(2) adsorbs and successively reacts with the H adatoms, resulting in the formation of water species. Using time-lapsed STM imaging, we have unraveled the individual reaction intermediates of HO(2), H(2)O(2), and H(3)O(2) stoichiometry and the final reaction product-pairs of water molecules, [H(2)O](2). Because of their different appearance and mobility, these four species are discernible in the time-lapsed STM images. The interpretation of the STM results is corroborated by density functional theory calculations. The presented experimental and theoretical results are discussed with respect to previous reports where other reaction mechanisms have been put forward.

Oxygen-mediated diffusion of oxygen vacancies on the TiO2(110) surface.

Defects such as oxygen vacancies play a crucial role in the surface properties of transition metal oxides. By means of time-resolved, high-resolution scanning tunneling microscopy, we unraveled an adsorbate-mediated diffusion mechanism of oxygen vacancies on rutile TiO2(110). Adsorbed oxygen molecules mediate vacancy diffusion through the loss of an oxygen atom to a vacancy and the sequential capture of an oxygen atom from a neighboring bridging oxygen row, leading to an anisotropic oxygen vacancy diffusion pathway perpendicular to the bridging oxygen rows.

Electron transfer-induced dynamics of oxygen molecules on the TiO2(110) surface.

Diffusion of oxygen molecules on transition metal oxide surfaces plays a vital role for the understanding of catalysis and photocatalysis on these materials. By means of time-resolved scanning tunneling microscopy, we provide evidence for a charge transfer-induced diffusion mechanism for O2 molecules adsorbed on a rutile TiO2(110) surface. The O2 hopping rate depended on the number of surface donors (oxygen vacancies), which determines the density of conduction band electrons. These results may have implications for the understanding of oxidation processes on metal oxides in general.