Repair of adjacent single-strand breaks is often accompanied by the formation of tandem sequence duplications in plant genomes.

Duplication of existing sequences is a major mechanism of genome evolution. It has been previously shown that duplications can occur by replication slippage, unequal sister chromatid exchange, homologous recombination, and aberrant double-strand break-induced synthesis-dependent strand annealing reactions. In a recent study, the abundant presence of short direct repeats was documented by comparative bioinformatics analysis of different rice genomes, and the hypothesis was put forward that such duplications might arise due to the concerted repair of adjacent single-strand breaks (SSBs). Applying the CRISPR/Cas9 technology, we were able to test this hypothesis experimentally in the model plant Arabidopsis thaliana Using a Cas9 nickase to induce adjacent genomic SSBs in different regions of the genome (genic, intergenic, and heterochromatic) and at different distances (∼20, 50, and 100 bps), we analyzed the repair outcomes by deep sequencing. In addition to deletions, we regularly detected the formation of direct repeats close to the break sites, independent of the genomic context. The formation of these duplications as well as deletions may be associated with the presence of microhomologies. Most interestingly, we found that even the induction of two SSBs on the same DNA strand can cause genome alterations, albeit at a much lower level. Because such a scenario reflects a natural step during nucleotide excision repair, and given that the germline is set aside only late during development in plants, the repair of adjacent SSBs indeed seems to have an important influence on the shaping of plant genomes during evolution.

Live-cell CRISPR imaging in plants reveals dynamic telomere movements.

Elucidating the spatiotemporal organization of the genome inside the nucleus is imperative to our understanding of the regulation of genes and non-coding sequences during development and environmental changes. Emerging techniques of chromatin imaging promise to bridge the long-standing gap between sequencing studies, which reveal genomic information, and imaging studies that provide spatial and temporal information of defined genomic regions. Here, we demonstrate such an imaging technique based on two orthologues of the bacterial clustered regularly interspaced short palindromic repeats (CRISPR)-CRISPR associated protein 9 (Cas9). By fusing eGFP/mRuby2 to catalytically inactive versions of Streptococcus pyogenes and Staphylococcus aureus Cas9, we show robust visualization of telomere repeats in live leaf cells of Nicotiana benthamiana. By tracking the dynamics of telomeres visualized by CRISPR-dCas9, we reveal dynamic telomere movements of up to 2 µm over 30 min during interphase. Furthermore, we show that CRISPR-dCas9 can be combined with fluorescence-labelled proteins to visualize DNA-protein interactions in vivo. By simultaneously using two dCas9 orthologues, we pave the way for the imaging of multiple genomic loci in live plants cells. CRISPR imaging bears the potential to significantly improve our understanding of the dynamics of chromosomes in live plant cells.

Highly efficient heritable plant genome engineering using Cas9 orthologues from Streptococcus thermophilus and Staphylococcus aureus.

The application of the clustered regularly interspaced short palindromic repeats (CRISPR)/Cas system of Streptococcus pyogenes (SpCas9) is currently revolutionizing genome engineering in plants. However, synthetic plant biology will require more complex manipulations of genomes and transcriptomes. The simultaneous addressing of different specific genomic sites with independent enzyme activities within the same cell is a key to this issue. Such approaches can be achieved by the adaptation of additional bacterial orthologues of the CRISPR/Cas system for use in plant cells. Here, we show that codon-optimised Cas9 orthologues from Streptococcus thermophilus (St1Cas9) and Staphylococcus aureus (SaCas9) can both be used to induce error-prone non-homologous end-joining-mediated targeted mutagenesis in the model plant Arabidopsis thaliana at frequencies at least comparable to those that have previously been reported for the S. pyogenes CRISPR/Cas system. Stable inheritance of the induced targeted mutations of the ADH1 gene was demonstrated for both St1Cas9- and SaCas9-based systems at high frequencies. We were also able to demonstrate that the SaCas9 and SpCas9 proteins enhance homologous recombination via the induction of double-strand breaks only in the presence of their species-specific single guide (sg) RNAs. These proteins are not prone to inter-species interference with heterologous sgRNA expression constructs. Thus, the CRISPR/Cas systems of S. pyogenes and S. aureus should be appropriate for simultaneously addressing different sequence motifs with different enzyme activities in the same plant cell.

Homology-based double-strand break-induced genome engineering in plants.

KEY MESSAGE: This review summarises the recent progress in DSB-induced gene targeting by homologous recombination in plants. We are getting closer to efficiently inserting genes or precisely exchanging single amino acids. Although the basic features of double-strand break (DSB)-induced genome engineering were established more than 20 years ago, only in recent years has the technique come into the focus of plant biologists. Today, most scientists apply the recently discovered CRISPR/Cas system for inducing site-specific DSBs in genes of interest to obtain mutations by non-homologous end joining (NHEJ), which is the prevailing and often imprecise mechanism of DSB repair in somatic plant cells. However, predefined changes like the site-specific insertion of foreign genes or an exchange of single amino acids can be achieved by DSB-induced homologous recombination (HR). Although DSB induction drastically enhances the efficiency of HR, the efficiency is still about two orders of magnitude lower than that of NHEJ. Therefore, significant effort have been put forth to improve DSB-induced HR based technologies. This review summarises the previous studies as well as discusses the most recent developments in using the CRISPR/Cas system to improve these processes for plants.

The CRISPR/Cas system can be used as nuclease for in planta gene targeting and as paired nickases for directed mutagenesis in Arabidopsis resulting in heritable progeny.

The CRISPR/Cas nuclease is becoming a major tool for targeted mutagenesis in eukaryotes by inducing double-strand breaks (DSBs) at pre-selected genomic sites that are repaired by non-homologous end joining (NHEJ) in an error-prone way. In plants, it could be demonstrated that the Cas9 nuclease is able to induce heritable mutations in Arabidopsis thaliana and rice. Gene targeting (GT) by homologous recombination (HR) can also be induced by DSBs. Using a natural nuclease and marker genes, we previously developed an in planta GT strategy in which both a targeting vector and targeting locus are activated simultaneously via DSB induction during plant development. Here, we demonstrate that this strategy can be used for natural genes by CRISPR/Cas-mediated DSB induction. We were able to integrate a resistance cassette into the ADH1 locus of A. thaliana via HR. Heritable events were identified using a PCR-based genotyping approach, characterised by Southern blotting and confirmed on the sequence level. A major concern is the specificity of the CRISPR/Cas nucleases. Off-target effects might be avoided using two adjacent sgRNA target sequences to guide the Cas9 nickase to each of the two DNA strands, resulting in the formation of a DSB. By amplicon deep sequencing, we demonstrate that this Cas9 paired nickase strategy has a mutagenic potential comparable with that of the nuclease, while the resulting mutations are mostly deletions. We also demonstrate the stable inheritance of such mutations in A. thaliana.

Both CRISPR/Cas-based nucleases and nickases can be used efficiently for genome engineering in Arabidopsis thaliana.

Engineered nucleases can be used to induce site-specific double-strand breaks (DSBs) in plant genomes. Thus, homologous recombination (HR) can be enhanced and targeted mutagenesis can be achieved by error-prone non-homologous end-joining (NHEJ). Recently, the bacterial CRISPR/Cas9 system was used for DSB induction in plants to promote HR and NHEJ. Cas9 can also be engineered to work as a nickase inducing single-strand breaks (SSBs). Here we show that only the nuclease but not the nickase is an efficient tool for NHEJ-mediated mutagenesis in plants. We demonstrate the stable inheritance of nuclease-induced targeted mutagenesis events in the ADH1 and TT4 genes of Arabidopsis thaliana at frequencies from 2.5 up to 70.0%. Deep sequencing analysis revealed NHEJ-mediated DSB repair in about a third of all reads in T1 plants. In contrast, applying the nickase resulted in the reduction of mutation frequency by at least 740-fold. Nevertheless, the nickase is able to induce HR at similar efficiencies as the nuclease or the homing endonuclease I-SceI. Two different types of somatic HR mechanisms, recombination between tandemly arranged direct repeats as well as gene conversion using the information on an inverted repeat could be enhanced by the nickase to a similar extent as by DSB-inducing enzymes. Thus, the Cas9 nickase has the potential to become an important tool for genome engineering in plants. It should not only be applicable for HR-mediated gene targeting systems but also by the combined action of two nickases as DSB-inducing agents excluding off-target effects in homologous genomic regions.

CRISPR/Cas-Mediated In Planta Gene Targeting.

The recent emergence of the CRISPR/Cas system has boosted the possibilities for precise genome engineering approaches throughout all kingdoms of life. The most common application for plants is targeted mutagenesis, whereby a Cas9-mediated DNA double-strand break (DSB) is repaired by mutagenic nonhomologous end joining (NHEJ). However, the site-specific alteration of a genomic sequence or integration of a transgene relies on the precise repair by homologous recombination (HR) using a suitable donor sequence: this poses a particular challenge in plants, as NHEJ is the preferred repair mechanism for DSBs in somatic tissue. Here, we describe our recently developed in planta gene targeting (ipGT) system, which works via the induction of DSBs by Cas9 to activate the target and the targeting vector at the same time, making it independent of high transformation efficiencies.

Revolutionizing plant biology: multiple ways of genome engineering by CRISPR/Cas.

The precise manipulation of plant genomes relies on the induction of DNA double-strand breaks by site-specific nucleases to initiate DNA repair reactions that are either based on non-homologous end joining (NHEJ) or homologous recombination (HR). Recently, the CRISPR/Cas system emerged as the most important tool for genome engineering due to its simple structure and its applicability to a wide range of organisms. Here, we review the current status of its various applications in plants, where it is used for the successful generation of stable mutations in a steadily growing number of species through NHEJ. Furthermore, tremendous progress in plant genome engineering by HR was obtained by the setup of replicon mediated and in planta gene targeting techniques. Finally, other complex approaches that rely on the induction of more than one DNA lesion at a time such as paired nickases to avoid off-site effects or controlled genomic deletions are beginning to be applied routinely.

CRISPR/Cas-Mediated Site-Specific Mutagenesis in Arabidopsis thaliana Using Cas9 Nucleases and Paired Nickases.

The CRISPR/Cas system has recently become the most important tool for genome engineering due to its simple architecture that allows for rapidly changing the target sequence and its applicability to organisms throughout all kingdoms of life. The need for an easy-to-use and reliable nuclease is especially high in plant research, as precise genome modifications are almost impossible to achieve by Agrobacterium-mediated transformation and the regeneration of plants from protoplast cultures is very labor intensive. Here, we describe the application of the Cas9 nuclease to Arabidopsis thaliana for the induction of heritable targeted mutations, which may also be used for other plant species. To cover the concern for off-target activity, we also describe the generation of stable mutants using paired Cas9 nickases.