RESUMO
The magnetic spectrometer AMS-100, which includes a superconducting coil, is designed to measure cosmic rays and detect cosmic antimatter in space. This extreme environment requires a suitable sensing solution to monitor critical changes in the structure such as the beginning of a quench in the superconducting coil. Rayleigh-scattering-based distributed optical fibre sensors (DOFS) fulfil the high requirements for these extreme conditions but require precise calibration of the temperature and strain coefficients of the optical fibre. Therefore, the fibre-dependent strain and temperature coefficients KT and Kϵ for the temperature range from 77 K to 353 K were investigated in this study. The fibre was integrated into an aluminium tensile test sample with well-calibrated strain gauges to determine the fibre's Kϵ independently of its Young's modulus. Simulations were used to validate that the strain caused by changes in temperature or mechanical conditions was the same in the optical fibre as in the aluminium test sample. The results indicated a linear temperature dependence of Kϵ and a non-linear temperature dependence of KT. With the parameters presented in this work, it was possible to accurately determine the strain or temperature of an aluminium structure over the entire temperature range from 77 K to 353 K using the DOFS.
RESUMO
Immune therapy for cancer patients is a new and promising area that in the future may complement traditional chemotherapy. The cell expansion phase is a critical part of the process chain to produce a large number of high-quality, genetically modified immune cells from an initial sample from the patient. Smart sensors augment the ability of the control and monitoring system of the process to react in real-time to key control parameter variations, adapt to different patient profiles, and optimize the process. The aim of the current work is to develop and calibrate smart sensors for their deployment in a real bioreactor platform, with adaptive control and monitoring for diverse patient/donor cell profiles. A set of contrasting smart sensors has been implemented and tested on automated cell expansion batch runs, which incorporate advanced data-driven machine learning and statistical techniques to detect variations and disturbances of the key system features. Furthermore, a 'consensus' approach is applied to the six smart sensor alerts as a confidence factor which helps the human operator identify significant events that require attention. Initial results show that the smart sensors can effectively model and track the data generated by the Aglaris FACER bioreactor, anticipate events within a 30 min time window, and mitigate perturbations in order to optimize the key performance indicators of cell quantity and quality. In quantitative terms for event detection, the consensus for sensors across batch runs demonstrated good stability: the AI-based smart sensors (Fuzzy and Weighted Aggregation) gave 88% and 86% consensus, respectively, whereas the statistically based (Stability Detector and Bollinger) gave 25% and 42% consensus, respectively, the average consensus for all six being 65%. The different results reflect the different theoretical approaches. Finally, the consensus of batch runs across sensors gave even higher stability, ranging from 57% to 98% with an average consensus of 80%.
Assuntos
Reatores Biológicos , Aprendizado de Máquina , Humanos , Proliferação de Células , ConsensoRESUMO
Phase contrast is one of the most important microscopic methods for making visible transparent, unstained cells. Cell cultures are often cultivated in microtiter plates, consisting of several cylindrical wells. The surface tension of the culture medium forms a liquid lens within the well, causing phase contrast conditions to fail in the more curved edge areas, preventing cell observation. Adaptive phase contrast microscopy is a method to strongly increase the observable area by optically compensating for the meniscus effect. The microscope's condenser annulus is replaced by a transmissive LCD to allow dynamic changes. A deformable, liquid-filled prism is placed in the illumination path. The prism's surface angle is adaptively inclined to refract transmitted light so that the tangential angle of the liquid lens can be compensated. Besides the observation of the phase contrast image, a beam splitter allows to simultaneously view condenser annulus and phase ring displacement. Algorithms analyze the displacement to dynamically adjust the LCD and prism to guarantee phase contrast conditions. Experiments show a significant increase in observable area, especially for small well sizes. For 96-well-plates, more than twelve times the area can be examined under phase contrast conditions instead of standard phase contrast microscopy.
RESUMO
BACKGROUND: The cultivation, analysis, and isolation of single cells or cell cultures are fundamental to modern biological and medical processes. The novel LIFTOSCOPE technology aims to integrate analysis and isolation into one versatile, fully automated device. METHODS: LIFTOSCOPE's three core technologies are high-speed microscopy for rapid full-surface imaging of cell culture vessels, AI-based semantic segmentation of microscope images for localization and evaluation of cells, and laser-induced forward transfer (LIFT) for contact-free isolation of cells and cell clusters. LIFT transfers cells from a standard microtiter plate (MTP) across an air gap to a receiver plate, from where they can be further cultivated. The LIFT laser is integrated into the optical path of an inverse microscope, allowing to switch quickly between microscopic observation and cell transfer. RESULTS: Tests of the individual process steps prove the feasibility of the concept. A prototype setup shows the compatibility of the microscope stage with the LIFT laser. A specifically designed MTP adapter to hold a receiver plate has been designed and successfully used for material transfers. A suitable AI algorithm has been found for cell selection. CONCLUSION: LIFTOSCOPE speeds up cell cultivation and analysis with a target process time of 10 minutes, which can be achieved if the cell transfer is sped up using a more efficient path-finding algorithm. Some challenges remain, like finding a suitable cell transfer medium. SIGNIFICANCE: The LIFTOSCOPE system can be used to extend existing cell cultivation systems and microscopes for fully automated biotechnological applications.
RESUMO
This paper discusses the challenges of producing CAR-T cells for cancer treatment and the potential for Artificial Intelligence (AI) for its improvement. CAR-T cell therapy was approved in 2018 as the first Advanced Therapy Medicinal Product (ATMP) for treating acute leukemia and lymphoma. ATMPs are cell- and gene-based therapies that show great promise for treating various cancers and hereditary diseases. While some new ATMPs have been approved, ongoing clinical trials are expected to lead to the approval of many more. However, the production of CAR-T cells presents a significant challenge due to the high costs associated with the manufacturing process, making the therapy very expensive (approx. $400,000). Furthermore, autologous CAR-T therapy is limited to a make-to-order approach, which makes scaling economical production difficult. First attempts are being made to automate this multi-step manufacturing process, which will not only directly reduce the high manufacturing costs but will also enable comprehensive data collection. AI technologies have the ability to analyze this data and convert it into knowledge and insights. In order to exploit these opportunities, this paper analyses the data potential in the automated CAR-T production process and creates a mapping to the capabilities of AI applications. The paper explores the possible use of AI in analyzing the data generated during the automated process and its capabilities to further improve the efficiency and cost-effectiveness of CAR-T cell production.
RESUMO
PURPOSE: Optical coherence tomography (OCT) is an imaging technology based on low-coherence interferometry, which provides non-invasive, high-resolution cross-sectional images of biological tissues. A potential clinical application is the intraoperative examination of resection margins, as a real-time adjunct to histological examination. In this ex vivo study, we investigated the ability of OCT to differentiate colorectal liver metastases (CRLM) from healthy liver parenchyma, when combined with convolutional neural networks (CNN). METHODS: Between June and August 2020, consecutive adult patients undergoing elective liver resections for CRLM were included in this study. Fresh resection specimens were scanned ex vivo, before fixation in formalin, using a table-top OCT device at 1310 nm wavelength. Scanned areas were marked and histologically examined. A pre-trained CNN (Xception) was used to match OCT scans to their corresponding histological diagnoses. To validate the results, a stratified k-fold cross-validation (CV) was carried out. RESULTS: A total of 26 scans (containing approx. 26,500 images in total) were obtained from 15 patients. Of these, 13 were of normal liver parenchyma and 13 of CRLM. The CNN distinguished CRLM from healthy liver parenchyma with an F1-score of 0.93 (0.03), and a sensitivity and specificity of 0.94 (0.04) and 0.93 (0.04), respectively. CONCLUSION: Optical coherence tomography combined with CNN can distinguish between healthy liver and CRLM with great accuracy ex vivo. Further studies are needed to improve upon these results and develop in vivo diagnostic technologies, such as intraoperative scanning of resection margins.
Assuntos
Neoplasias Colorretais , Neoplasias Hepáticas , Adulto , Humanos , Tomografia de Coerência Óptica/métodos , Margens de Excisão , Redes Neurais de Computação , Neoplasias Hepáticas/diagnóstico por imagem , Neoplasias Colorretais/diagnóstico por imagemRESUMO
PURPOSE: Surgical resection with complete tumor excision (R0) provides the best chance of long-term survival for patients with intrahepatic cholangiocarcinoma (iCCA). A non-invasive imaging technology, which could provide quick intraoperative assessment of resection margins, as an adjunct to histological examination, is optical coherence tomography (OCT). In this study, we investigated the ability of OCT combined with convolutional neural networks (CNN), to differentiate iCCA from normal liver parenchyma ex vivo. METHODS: Consecutive adult patients undergoing elective liver resections for iCCA between June 2020 and April 2021 (n = 11) were included in this study. Areas of interest from resection specimens were scanned ex vivo, before formalin fixation, using a table-top OCT device at 1310 nm wavelength. Scanned areas were marked and histologically examined, providing a diagnosis for each scan. An Xception CNN was trained, validated, and tested in matching OCT scans to their corresponding histological diagnoses, through a 5 × 5 stratified cross-validation process. RESULTS: Twenty-four three-dimensional scans (corresponding to approx. 85,603 individual) from ten patients were included in the analysis. In 5 × 5 cross-validation, the model achieved a mean F1-score, sensitivity, and specificity of 0.94, 0.94, and 0.93, respectively. CONCLUSION: Optical coherence tomography combined with CNN can differentiate iCCA from liver parenchyma ex vivo. Further studies are necessary to expand on these results and lead to innovative in vivo OCT applications, such as intraoperative or endoscopic scanning.
Assuntos
Neoplasias dos Ductos Biliares , Colangiocarcinoma , Adulto , Humanos , Tomografia de Coerência Óptica/métodos , Redes Neurais de Computação , Fígado/diagnóstico por imagem , Fígado/cirurgia , Colangiocarcinoma/diagnóstico por imagem , Colangiocarcinoma/cirurgia , Neoplasias dos Ductos Biliares/diagnóstico por imagem , Neoplasias dos Ductos Biliares/cirurgia , Ductos Biliares Intra-Hepáticos/diagnóstico por imagem , Ductos Biliares Intra-Hepáticos/cirurgiaRESUMO
Recreating human tissues and organs in the petri dish to establish models as tools in biomedical sciences has gained momentum. These models can provide insight into mechanisms of human physiology, disease onset, and progression, and improve drug target validation, as well as the development of new medical therapeutics. Transformative materials play an important role in this evolution, as they can be programmed to direct cell behavior and fate by controlling the activity of bioactive molecules and material properties. Using nature as an inspiration, scientists are creating materials that incorporate specific biological processes observed during human organogenesis and tissue regeneration. This article presents the reader with state-of-the-art developments in the field of in vitro tissue engineering and the challenges related to the design, production, and translation of these transformative materials. Advances regarding (stem) cell sources, expansion, and differentiation, and how novel responsive materials, automated and large-scale fabrication processes, culture conditions, in situ monitoring systems, and computer simulations are required to create functional human tissue models that are relevant and efficient for drug discovery, are described. This paper illustrates how these different technologies need to converge to generate in vitro life-like human tissue models that provide a platform to answer health-based scientific questions.
Assuntos
Células-Tronco , Engenharia Tecidual , Humanos , Descoberta de Drogas , Sistemas de Liberação de Medicamentos , Materiais Biocompatíveis/farmacologiaRESUMO
Induced pluripotent stem cells (iPS cells) represent a particularly versatile stem cell type for a large array of applications in biology and medicine. Taking full advantage of iPS cell technology requires high throughput and automated iPS cell culture and differentiation. We present an automated platform for efficient and robust iPS cell culture and differentiation into blood cells. We implemented cell cluster sorting for analysis and sorting of iPS cell clusters in order to establish clonal iPS cell lines with high reproducibility and efficacy. Patient-specific iPS cells were induced to differentiate towards hematopoietic cells via embryoid body (EB) formation. EB size impacts on iPS cell differentiation and we applied cell cluster sorting to obtain EB of defined size for efficient blood cell differentiation. In summary, implementing cell cluster sorting into the workflow of iPS cell cloning, growth and differentiation represent a valuable add-on for standard and automated iPS cell handling.
RESUMO
CAR-T cell therapy is a promising treatment for acute leukemia and lymphoma. CAR-T cell therapies take a pioneering role in autologous gene therapy with three EMA-approved products. However, the chance of clinical success remains relatively low as the applicability of CAR-T cell therapy suffers from long, labor-intensive manufacturing and a lack of comprehensive insight into the bioprocess. This leads to high manufacturing costs and limited clinical success, preventing the widespread use of CAR-T cell therapies. New manufacturing approaches are needed to lower costs to improve manufacturing capacity and shorten provision times. Semi-automated devices such as the Miltenyi Prodigy® were developed to reduce hands-on production time. However, these devices are not equipped with the process analytical technology necessary to fully characterize and control the process. An automated AI-driven CAR-T cell manufacturing platform in smart manufacturing hospitals (SMH) is being developed to address these challenges. Automation will increase the cost-effectiveness and robustness of manufacturing. Using Artificial Intelligence (AI) to interpret the data collected on the platform will provide valuable process insights and drive decisions for process optimization. The smart integration of automated CAR-T cell manufacturing platforms into hospitals enables the independent manufacture of autologous CAR-T cell products. In this perspective, we will be discussing current challenges and opportunities of the patient-specific but highly automated, AI-enabled CAR-T cell manufacturing. A first automation concept will be shown, including a system architecture based on current Industry 4.0 approaches for AI integration.
RESUMO
Although regenerative medicine products are at the forefront of scientific research, technological innovation, and clinical translation, their reproducibility and large-scale production are compromised by automation, monitoring, and standardization issues. To overcome these limitations, new technologies at software (e.g., algorithms and artificial intelligence models, combined with imaging software and machine learning techniques) and hardware (e.g., automated liquid handling, automated cell expansion bioreactor systems, automated colony-forming unit counting and characterization units, and scalable cell culture plates) level are under intense investigation. Automation, monitoring and standardization should be considered at the early stages of the developmental cycle of cell products to deliver more robust and effective therapies and treatment plans to the bedside, reducing healthcare expenditure and improving services and patient care.
RESUMO
While human induced pluripotent stem cells (hiPSCs) provide novel prospects for disease-modeling, the high phenotypic variability seen across different lines demands usage of large hiPSC cohorts to decipher the impact of individual genetic variants. Thus, a much higher grade of parallelization, and throughput in the production of hiPSCs is needed, which can only be achieved by implementing automated solutions for cell reprogramming, and hiPSC expansion. Here, we describe the StemCellFactory, an automated, modular platform covering the entire process of hiPSC production, ranging from adult human fibroblast expansion, Sendai virus-based reprogramming to automated isolation, and parallel expansion of hiPSC clones. We have developed a feeder-free, Sendai virus-mediated reprogramming protocol suitable for cell culture processing via a robotic liquid handling unit that delivers footprint-free hiPSCs within 3 weeks with state-of-the-art efficiencies. Evolving hiPSC colonies are automatically detected, harvested, and clonally propagated in 24-well plates. In order to ensure high fidelity performance, we have implemented a high-speed microscope for in-process quality control, and image-based confluence measurements for automated dilution ratio calculation. This confluence-based splitting approach enables parallel, and individual expansion of hiPSCs in 24-well plates or scale-up in 6-well plates across at least 10 passages. Automatically expanded hiPSCs exhibit normal growth characteristics, and show sustained expression of the pluripotency associated stem cell marker TRA-1-60 over at least 5 weeks (10 passages). Our set-up enables automated, user-independent expansion of hiPSCs under fully defined conditions, and could be exploited to generate a large number of hiPSC lines for disease modeling, and drug screening at industrial scale, and quality.