Elaboration and rheological characterization of nanocomposite hydrogels containing C60 fullerene nanoplatelets.

Nanocomposite hydrogels were elaborated that consisted of a physical network formed by an amphiphilic polymer in which C60 fullerene nanoplatelets were embedded. Characterization showed that the nanoplatelets within the polymer network were aggregated. The presence of these nanoplatelets led to an increase of the shear modulus of the hydrogels, that cannot be explained by a filler effect alone. The nanocomposite gels displayed similar rheological behavior, both in linear and non-linear domains, as neat hydrogels at higher polymer concentrations. We suggest that the particles reinforced the gels by forming additional connections between the polymer chains.

Tuning the water intrinsic permeability of PEGDA hydrogel membranes by adding free PEG chains of varying molar masses.

We explore the effect of poly(ethylene glycol) (PEG) molar mass on the intrinsic permeability and structural characteristics of poly(ethylene glycol) diacrylate PEGDA/PEG composite hydrogel membranes. We observe that by varying the PEG content and molar mass, we can finely adjust the water intrinsic permeability by several orders of magnitude. Notably, we show the existence of maximum water intrinsic permeability, already identified in a previous study to be located at the critical overlap concentration C* of PEG chains, for the highest PEG molar mass studied. Furthermore, we note that the maximum intrinsic permeability follows a non-monotonic evolution with respect to the PEG molar mass and reaches its peak at 35 000 g mol-1. Besides, our results show that a significant fraction of PEG chains is irreversibly trapped within the PEGDA matrix even for the lowest molar masses down to 600 g mol-1. This observation suggests the possibility of covalent grafting of the PEG chains onto the PEGDA matrix. CryoSEM and AFM measurements demonstrate the presence of large micron-sized cavities separated by PEGDA-rich walls whose nanometric structures strongly depend on the PEG content. By combining our permeability and structural measurements, we suggest that the PEG chains trapped inside the PEGDA-rich walls induce nanoscale defects in the crosslinking density, resulting in increased permeability below C*. Conversely, above C*, we speculate that partially trapped PEG chains may form a brush-like arrangement on the surface of the PEGDA-rich walls, leading to a reduction in permeability. These two opposing effects are anticipated to exhibit molar-mass-dependent trends, contributing to the non-monotonic variation of the maximum intrinsic permeability at C*. Overall, our results demonstrate the potential to fine-tune the properties of hydrogel membranes, offering new opportunities for separation applications.

The conformation of glutenin polymers in wheat grain: some genetic and environmental factors associated with this important characteristic.

In a previous study we used asymmetric-flow field-flow fractionation to determine the polymer mass (Mw), gyration radius (Rw) and the polydispersity index of glutenin polymers (GPs) in wheat (Triticum aestivum). Here, using the same multi-location trials (4 years, 11 locations, and 192 cultivars), we report the factors that are associated with the conformation (Conf) of the polymers, which is the slope of Log(Rw) versus a function of Log(Mw). We found that Conf varied between 0.285 and 0.740, it had low broad-sense heritability (H2=16.8), and it was significantly influenced by the temperature occurring over the last month of grain filling. Higher temperatures were found to increase Rw and the compactness and sphericity of GPs. Alleles for both high- and low-molecular-weight glutenin subunits had a significant influence on the Conf value. Assuming a Gaussian distribution for Mw, the number of polymers present in wheat grains was computed for different kernel weights and protein concentrations, and it was found to exceed 1012 GPs per grain. Using atomic force microscopy and cryo-TEM, images of GPs were obtained for the first time. Under higher average temperature, GPs became larger and more spherical and consequently less prone to rapid hydrolysis. We propose some orientations that could be aimed at potentially reducing the impact of numerous GPs on people suffering from non-celiac gluten sensitivity.

Sieving and Clogging in PEG-PEGDA Hydrogel Membranes.

Hydrogels are promising systems for separation applications due to their structural characteristics (i.e., hydrophilicity and porosity). In our study, we investigate the permeation of suspensions of rigid latex particles of different sizes through free-standing hydrogel membranes prepared by photopolymerization of a mixture of poly(ethylene glycol) diacrylate (PEGDA) and large poly(ethylene glycol) (PEG) chains of 300,000 g·mol-1 in the presence of a photoinitiator. Atomic force microscopy and cryoscanning electron microscopy (cryoSEM) were employed to characterize the structures of the hydrogel membranes. We find that the 20 nm particle permeation depends on both the PEGDA/PEG composition and the pressure applied during filtration. In contrast, we do not measure a significant permeation of the 100 nm and 1 µm particles, despite the presence of large cavities of 1 µm evidenced by the cryoSEM images. We suggest that the PEG chains induce local nanoscale defects in the cross-linking of PEGDA-rich walls separating the micrometer-sized cavities, which control the permeation of particles and water. Moreover, we discuss the decline of the permeation flux observed in the presence of latex particles compared to that of pure water. We suggest that a thin layer of particles forms on the surface of the hydrogels.

Mechanistic Insights into Hyaluronic Acid Induced Peptide Nanofiber Organization in Supramolecular Hydrogels.

Composite hydrogels composed of low-molecular-weight peptide self-assemblies and polysaccharides are gaining great interest as new types of biomaterials. Interactions between polysaccharides and peptide self-assemblies are well reported, but a molecular picture of their impact on the resulting material is still missing. Using the phosphorylated tripeptide precursor Fmoc-FFpY (Fmoc, fluorenylmethyloxycarbonyl; F, phenylalanine; Y, tyrosine; p, phosphate group), we investigated how hyaluronic acid (HA) influences the enzyme-assisted self-assembly of Fmoc-FFY generated in situ in the presence of alkaline phosphatase (AP). In the absence of HA, Fmoc-FFY peptides are known to self-assemble in nanometer thick and micrometer long fibers. The presence of HA leads to the spontaneous formation of bundles of several micrometers thickness. Using fluorescence recovery after photobleaching (FRAP), we find that in the bundles both (i) HA colocalizes with the peptide self-assemblies and (ii) its presence in the bundles is highly dynamic. The attractive interaction between negatively charged peptide fibers and negatively charged HA chains is explained through molecular dynamic simulations that show the existence of hydrogen bonds. Whereas the Fmoc-FFY peptide self-assembly itself is not affected by the presence of HA, this polysaccharide organizes the peptide nanofibers in a nematic phase visible by small-angle X-ray scattering (SAXS). The mean distance d between the nanofibers decreases by increasing the HA concentration c, but remains always larger than the diameter of the peptide nanofibers, indicating that they do not interact directly with each other. At a high enough HA concentration, the nematic organization transforms into an ordered 2D hexagonal columnar phase with a nanofiber distance d of 117 Å. Depletion interaction generated by the polysaccharides can explain the experimental power law variation d∼c-1/4 and is responsible for the bundle formation and organization. Such behavior is thus suggested for the first time on nano-objects using polymers partially adsorbing on self-assembled peptide nanofibers.

Tear of lipid membranes by nanoparticles.

Health concerns associated with the advent of nanotechnologies have risen sharply when it was found that particles of nanoscopic dimensions reach the cell lumina. Plasma and organelle lipid membranes, which are exposed to both the incoming and the engulfed nanoparticles, are the primary targets of possible disruptions. However, reported adhesion, invagination and embedment of nanoparticles (NPs) do not compromise the membrane integrity, precluding direct bilayer damage as a mechanism for toxicity. Here it is shown that a lipid membrane can be torn by small enough nanoparticles, thus unveiling mechanisms for how lipid membrane can be compromised by tearing from nanoparticles. Surprisingly, visualization by cryo transmission electron microscopy (cryo-TEM) of liposomes exposed to nanoparticles revealed also that liposomal laceration is prevented by particle abundance. Membrane destruction results thus from a subtle particle-membrane interplay that is here elucidated. This brings into a firmer molecular basis the theorized mechanisms of nanoparticle effects on lipid bilayers and paves the way for a better assessment of nanoparticle toxicity.

Structure of Nanotubes Self-Assembled from a Monoamide Organogelator.

Some organic compounds are known to self-assemble into nanotubes in solutions, but the packing of the molecules into the walls of the tubes is known only in a very few cases. Herein, we study two compounds forming nanotubes in alkanes. They bear a secondary alkanamide chain linked to a benzoic acid propyl ester (HUB-3) or to a butyl ester (HUB-4). They gel alkanes for concentrations above 0.2 wt.%. The structures of these gels, studied by freeze fracture electron microscopy, exhibit nanotubes: for HUB-3 their external diameters are polydisperse with a mean value of 33.3 nm; for HUB-4, they are less disperse with a mean value of 25.6 nm. The structure of the gel was investigated by small- and wide-angle X-ray scattering. The evolution of the intensities show that the tubes are metastable and transit slowly toward crystals. The intensities of the tubes of HUB-4 feature up to six oscillations. The shape of the intensities proves the tubular structure of the aggregates, and gives a measurement of 20.6 nm for the outer diameters and 11.0 nm for the inner diameters. It also shows that the electron density in the wall of the tubes is heterogeneous and is well described by a model with three layers.

Autonomous Growth of a Spatially Localized Supramolecular Hydrogel with Autocatalytic Ability.

Autocatalysis and self-assembly are key processes in developmental biology and are involved in the emergence of life. In the last decade both of these features were extensively investigated by chemists with the final goal to design synthetic living systems. Herein, we describe the autonomous growth of a self-assembled soft material, that is, a supramolecular hydrogel, able to sustain its own formation through an autocatalytic mechanism that is not based on any template effect and emerges from a peptide (hydrogelator) self-assembly. A domino sequence of events starts from an enzymatically triggered peptide generation followed by self-assembly into catalytic nanofibers that induce and amplify their production over time, resulting in a 3D hydrogel network. A cascade is initiated by traces (10-18 m) of a trigger enzyme, which can be localized allowing for a spatial resolution of this autocatalytic buildup of hydrogel growth, an essential condition on the route towards further cell-mimic designs.

Phase Separation in Supramolecular Hydrogels Based on Peptide Self-Assembly from Enzyme-Coated Nanoparticles.

Spatial localization of biocatalysts, such as enzymes, has recently proven to be an effective process to direct supramolecular self-assemblies in a spatiotemporal way. In this work, silica nanoparticles (NPs) functionalized covalently by alkaline phosphatase (NPs@AP) induce the localized growth of self-assembled peptide nanofibers from NPs by dephosphorylation of Fmoc-FFpY peptides (Fmoc: fluorenylmethyloxycarbonyl; F: phenylalanine; Y: tyrosine; p: phosphate group). The fibrillary nanoarchitecture around NPs@AP underpins a homogeneous hydrogel, which unexpectedly undergoes a macroscopic shape change over time. This macroscopic change is due to a phase separation leading to a dense phase (in NPs and nanofibers) in the center of the vial and surrounded by a dilute one, which still contains NPs and peptide self-assemblies. We thus hypothesize that the phase separation is not a syneresis process. Such a change is only observed when the enzymes are localized on the NPs. The dense phase contracts with time until reaching a constant volume after several days. For a given phosphorylated peptide concentration, the dense phase contracts faster when the NPs@AP concentration is increased. For a given NPs@AP concentration, it condenses faster when the peptide concentration increases. We hypothesize that the appearance of a dense phase is not only due to attractive interactions between NPs@AP but also to the strong interactions of self-assembled peptide nanofibers with the enzymes, covalently fixed on the NPs.

Supported Catalytically Active Supramolecular Hydrogels for Continuous Flow Chemistry.

Inspired by biology, one current goal in supramolecular chemistry is to control the emergence of new functionalities arising from the self-assembly of molecules. In particular, some peptides can self-assemble and generate exceptionally catalytically active fibrous networks able to underpin hydrogels. Unfortunately, the mechanical fragility of these materials is incompatible with process developments, relaying this exciting field to academic curiosity. Here, we show that this drawback can be circumvented by enzyme-assisted self-assembly of peptides initiated at the walls of a supporting porous material. We applied this strategy to grow an esterase-like catalytically active supramolecular hydrogel (CASH) in an open-cell polymer foam, filling the whole interior space. Our supported CASH material is highly efficient towards inactivated esters and enables the kinetic resolution of racemates. This hybrid material is robust enough to be used in continuous flow reactors, and is reusable and stable over months.

Two-Dimensional Radial or Ring-Banded Nonbirefringent Spherulites of Semifluorinated Alkanes Coexistent with Close-Packed Self-Assembled Surface Nanodomains.

A series of semifluorinated alkanes (C nF2 n+1C mH2 m+1 diblocks, F n H m, n = 6, 8, 10; m = 16, 18, 20), when cast as films onto solid substrates, were found to form ring-banded or radial spherulites when heated above their isotropic temperature and subsequently cooled down to room temperature, demonstrating that the formation of two-dimensional (2D) spherulites is a general feature of molecular fluorocarbon-hydrocarbon diblocks. These spherulites are not birefringent, a seldom encountered feature for such structures (never, so far, for spherulites made of small molecules). They also provide examples of fluorinated 2D spherulites. Film morphology was analyzed by optical microscopy, interferometric profilometry, atomic force microscopy (AFM), and scanning electron microscopy. Increasing the length of the Fn segment favors the formation of ring-banded spherulites, whereas short Fn segments tend to favor extended radial stripes. Variation of the cooling rate provides control over the size and morphology of the spherulites: slow cooling promotes fibers and radial spherulites, whereas fast cooling fosters ring-banded spherulites. The AFM studies of F10 H16 films revealed that the latter consist of stacks of regularly spaced lamellae. We also observed that, remarkably, stacked lamellae (repeating distance ∼6 nm) can coexist with a layer of close-packed monodisperse circular self-assembled surface nanodomains of Fn Hm diblocks (∼30 nm in diameter); the latter are known to form from such diblocks at interfaces at room temperature. Substrates partially covered with F10 H16 contain incomplete ring-banded spherulites and smaller objects in which the lamellae and circular nanodomains coexist.

Microfluidic-Assisted Production of Size-Controlled Superparamagnetic Iron Oxide Nanoparticles-Loaded Poly(methyl methacrylate) Nanohybrids.

In this paper, superparamagnetic iron oxide nanoparticles (SPIONs, around 6 nm) encapsulated in poly(methyl methacrylate) nanoparticles (PMMA NPs) with controlled sizes ranging from 100 to 200 nm have been successfully produced. The hybrid polymeric NPs were prepared following two different methods: (1) nanoprecipitation and (2) nanoemulsification-evaporation. These two methods were implemented in two different microprocesses based on the use of an impact jet micromixer and an elongational-flow microemulsifier. SPIONs-loaded PMMA NPs synthesized by the two methods presented completely different physicochemical properties. The polymeric NPs prepared with the micromixer-assisted nanoprecipitation method showed a heterogeneous dispersion of SPIONs inside the polymer matrix, an encapsulation efficiency close to 100 wt %, and an irregular shape. In contrast, the polymeric NPs prepared with the microfluidic-assisted nanoemulsification-evaporation method showed a homogeneous dispersion, an almost complete encapsulation, and a spherical shape. The properties of the polymeric NPs have been characterized by dynamic light scattering, thermogravimetric analysis, and transmission electron microscope. In vitro cytotoxicity assays were also performed on the nanohybrids and pure PMMA NPs.

Kinetic evolution of DOPC lipid bilayers exposed to α-cyclodextrins.

Cyclodextrins are cyclic oligosaccharides capable of forming inclusion complexes with a variety of molecules, and as such have been recognized as a pharmaceutical and biotechnological asset. Cyclodextrins are known to interact with the components of cell membranes, and this correlates with a significant degree of cytotoxicity. In this work, we report on the mechanism of degradation of a model dioleoyl-phosphatidylcholine (DOPC) bilayer exposed to a solution with increasing concentrations of α-cyclodextrins. By combining optical fluorescence microscopy and quartz-crystal microbalance experiments, we study the evolution of supported lipid bilayers (SLBs) and giant unilamellar vesicles (GUVs). The rate of lipid removal is found to display a strong nonlinear dependence on the cyclodextrin concentration. A mechanism involving lipid aggregates is proposed.

Supramolecularly Engineered π-Amphiphile.

This article describes self-assembly of supramolecularly engineered naphthalene-diimide (NDI)-derived amphiphiles NDI-1 and NDI-2. They have the same hydrophobic/hydrophilic balance but merely differ by a single functional group, amide or ester. They exhibit distinct self-assembly in water; NDI-1 forms hydrogel, which upon aging forms crystals, whereas NDI-2 forms micelles as revealed by in-depth structural analysis using cryo-TEM, dynamic light scattering, and small-angle X-ray scattering studies. These results suggest that the H-bonding among the amide groups fully regulates the self-assembly by overruling the packing parameters. Further, the present study elucidates sharp lower critical solution temperature exhibited by these π-amphiphiles, which has been extensively studied for many important applications of water-soluble polymers but hardly known in the literature of small-molecule surfactants. Control experiments with the same water-soluble hydrophilic wedge did not show such a property, confirming this to be a consequence of the supramolecular polymerization by extended amide-amide H-bonding and not inherent to the structure of the hydrophilic wedge containing oligo-oxyethylene chains.

How High Concentrations of Proteins Stabilize the Amorphous State of Calcium Orthophosphate: A Solid-State Nuclear Magnetic Resonance (NMR) Study of the Casein Case.

Understanding how proteins stabilize amorphous calcium ortho-phosphate (ACP) phases is of great importance in biology and for pharmaceutical or food applications. Until now, most of the former investigations about ACP-protein stability and equilibrium were performed under conditions where ACP colloidal nanoclusters are surrounded by low to moderate concentrations of peptides or proteins (15-30 g L-1). As a result, the question of ACP-protein interactions in highly concentrated protein systems has clearly been overlooked, whereas it corresponds to actual industrial conditions such as drying or membrane filtration in the dairy industry for instance. In this study, the structure of an ACP phase is monitored in association with one model phosphorylated protein (casein) using solid-state nuclear magnetic resonance (ssNMR) under two conditions of high protein concentration (300 and 400 g L-1). At both concentrations and at 25 °C, it is found that the caseins maintain the mineral phase in an amorphous form with no detectable influence on its structure or size. Interestingly, and in both cases, a significant amount of the nonphosphorylated side chains interacts with ACP through hydrogen bonds. The number of these interacting side chains is found to be higher at the highest casein concentration. At 45 °C, which is a destabilizing temperature of ACP under protein-free conditions, the amorphous structure of the mineral phase is partially transformed at a casein concentration of 300 g L-1, while it remains almost intact at a casein concentration of 400 g L-1. Therefore, these results clearly indicate that increasing the concentration of proteins favors ACP-protein interactions and stabilizes the ACP clusters more efficiently.

Control of Surface-Localized, Enzyme-Assisted Self-Assembly of Peptides through Catalyzed Oligomerization.

Localized self-assembly allowing both spatial and temporal control over the assembly process is essential in many biological systems. This can be achieved through localized enzyme-assisted self-assembly (LEASA), also called enzyme-instructed self-assembly, where enzymes present on a substrate catalyze a reaction that transforms noninteracting species into self-assembling ones. Very few LEASA systems have been reported so far, and the control of the self-assembly process through the surface properties represents one essential step toward their use, for example, in artificial cell mimicry. Here, we describe a new type of LEASA system based on α-chymotrypsin adsorbed on a surface, which catalyzes the production of (KL)nOEt oligopeptides from a KLOEt (K: lysine; L: leucine; OEt ethyl ester) solution. When a critical concentration of the formed oligopeptides is reached near the surface, they self-assemble into ß-sheets resulting in a fibrillar network localized at the interface that can extend over several micrometers. One significant feature of this process is the existence of a lag time before the self-assembly process starts. We investigate, in particular, the effect of the α-chymotrypsin surface density and KLOEt concentration on the self-assembly kinetics. We find that the lag time can be finely tuned through the surface density in α-chymotrypsin and KLOEt concentration. For a given surface enzyme concentration, a critical KLOEt concentration exists below which no self-assembly takes place. This concentration increases when the surface density in enzyme decreases.

Influence of a pH-sensitive polymer on the structure of monoolein cubosomes.

Cubosomes consist in submicron size particles of lipid bicontinuous cubic phases stabilized by surfactant polymers. They provide an appealing road towards the practical use of lipid cubic phases for pharmaceutical and cosmetic applications, and efforts are currently being made to control the encapsulation and release properties of these colloidal objects. We overcome in this work the lack of sensitivity of monoolein cubosomes to pH conditions by using a pH sensitive polymer designed to strongly interact with the lipid structure at low pH. Our cryo-transmission electron microscope (cryo-TEM) and small-angle X-ray scattering (SAXS) results show that in the presence of the polymer the cubic phase structure is preserved at neutral pH, albeit with a larger cell size. At pH 5.5, in the presence of the polymer, the nanostructure of the cubosome particles is significantly altered, providing a pathway to design pH-responsive cubosomes for applications in drug delivery.

Localized Supramolecular Peptide Self-Assembly Directed by Enzyme-Induced Proton Gradients.

Electrodes are ideal substrates for surface localized self-assembly processes. Spatiotemporal control over such processes is generally directed through the release of ions generated by redox reactions occurring specifically at the electrode. The so-used gradients of ions proved their effectiveness over the last decade but are in essence limited to material-based electrodes, considerably reducing the scope of applications. Herein is described a strategy to enzymatically generate proton gradients from non-conductive surfaces. In the presence of oxygen, immobilization of glucose oxidase (GOx) on a multilayer film provides a flow of protons through enzymatic oxidation of glucose by GOx. The confined acidic environment located at the solid-liquid interface allows the self-assembly of Fmoc-AA-OH (Fmoc=fluorenylmethyloxycarbonyl and A=alanine) dipeptides into ß-sheet nanofibers exclusively from and near the surface. In the absence of oxygen, a multilayer nanoreactor containing GOx and horseradish peroxidase (HRP) similarly induces Fmoc-AA-OH self-assembly.

Design of Highly Stable Echogenic Microbubbles through Controlled Assembly of Their Hydrophobin Shell.

Dispersing hydrophobin HFBII under air saturated with perfluorohexane gas limits HFBII aggregation to nanometer-sizes. Critical basic findings include an unusual co-adsorption effect caused by the fluorocarbon gas, a strong acceleration of HFBII adsorption at the air/water interface, the incorporation of perfluorohexane into the interfacial film, the suppression of the fluid-to-solid 2D phase transition exhibited by HFBII monolayers under air, and a drastic change in film elasticity of both Gibbs and Langmuir films. As a result, perfluorohexane allows the formation of homogenous populations of spherical, narrowly dispersed, exceptionally stable, and echogenic microbubbles.

Design of Nanohybrid Systems from a Partially Fluorinated Organogelator and Syndiotactic Polystyrene Thermoreversible Gel.

Nanohybrid systems are prepared from organogels of a partially fluorinated molecule and from thermoreversible gels of syndiotactic polystyrene. The thermodynamic behavior, morphology, and structure are investigated by using differential scanning calorimetry, atomic force microscopy, small-angle X-ray scattering (SAXS), and small-angle neutron scattering (SANS). The outcomes of these investigations suggest that the fibrils of the organogel coil around the sPS fibrils, probably through a heterogeneous nucleation process. These systems therefore differ from previously investigated sPS/OPV systems (oligo vinylene phenylene) where OPV fibrils pervade the sPS network.