Factors associated with fatigued, injured, and dead pig frequency during transport and lairage at a commercial abattoir.

The objective of this study was to identify environmental and management factors that are associated with the frequency of fatigued, injured, and dead pigs on arrival and in resting pens during lairage at a commercial Midwest abattoir. The terms transport losses or total losses refer to pigs that die or become nonambulatory at any stage of the marketing process. In this study, fatigued, injured, and dead pigs were summed into a variable termed total losses. Relative humidity (%), temperature ( degrees C), wind speed (m/s), and dew point ( degrees C) data were collected on 12,333 trailer loads of pigs. Week, sort from barn (first or third pig removal from barn), farm, normal vs. split load type (from 1 or multiple barns), load crew, driver, trailer, and wind direction were used as fixed effects in the model for the analysis of losses per load using generalized mixed models for Poisson distributions. Seven temperature-humidity indices (THI) were calculated and compared as model covariates. Load time per pig, trailer density (pigs per trailer x average BW/trailer space; kg/m(2)), wait time before unloading at the abattoir, and wind speed were used as model covariates. The log of the number of hogs per trailer was used to standardize the response variable. The linear covariate density accounted for the greatest portion of variance (based on F-value) followed by the fixed effect sort from barn, the fixed effect load type (pigs from 1 or multiple barns within a farm), load time per pig linear covariate, and THI. Pigs transported to the abattoir from June through July experienced fewer losses (P < 0.001) when compared with pigs that were transported from November through December. Keeping other factors constant, the log of total losses (%) per load increased by 0.0102x + 0.000541x(2) per unit of THI and 0.0191 kg/m(2) of density. Similarly, of 9 farms, the poorest-performing farm in regards to total loss percentage experienced 0.93% more losses per load when compared with the farm with the least loss percentage. This study demonstrates that multiple environment and management factors influence the incidence of market hog transport losses.

Influence of harvest processes on pork loin and ham quality.

The purpose of this study was to determine the specific effects of extending the interval between dwell time and the duration of scalding on pork quality attributes. Sixty-four Duroc x Yorkshire pigs were randomly assigned to a 2 x 2 factorial treatment arrangement. Treatments included extending the dwell duration from 5 to 10 min and extending the scald duration from 5 to 8 min. All carcasses entered the cooler 50 min after exsanguination. At exsanguination, blood was collected for three 1-min intervals and then for a final 2-min period. Temperature and pH of the LM and semimembranosus muscle (SM) were measured at 45 min, and at 2, 4, 6, and 24 h postmortem (PM). Hunter L*, a*, and b* values were determined on the LM, SM, and biceps femoris (BF). Purge loss was measured on the SM, BF, and the sirloin end of the loin. Drip loss was measured in duplicate from LM chops after 1 and 5 d of storage. Warner-Bratzler shear force (WBS) measurements were determined on LM chops aged 1, 3, 5, and 7 d PM. Over 99% of the collected blood was obtained during the first 3 min after sticking. Carcasses scalded for 8 min had greater (P < 0.05) semi-membranosus 2 h temperature (28.8 degrees C) than carcasses scalded 5 min (27.3 degrees C). An 8-min scald process resulted in longissimus dorsi chops with lower hue angle and greater WBS values than the 5-min scald process. Increasing dwell time from 5 to 10 min resulted in biceps femoris chops with greater hue angle and loin chops with greater WBS values at 3 d PM. Harvest processes did not significantly affect subjective quality scores, Hunter L* values, purge or drip loss. Lengthening the duration of dwell and scalding may result in a more rapid PM pH decline. Reducing the duration of scalding may lead to increased time for manual removal of hair. Because of differences in facilities, it is recommended that individual facilities monitor dwell and scald durations to determine how to best minimize time of entry into the cooler.