Macroporous Biodegradable Cryogels of Synthetic Poly(α-amino acids).

We present an investigation of the preparation of highly porous hydrogels based on biodegradable synthetic poly(α-amino acid) as potential tissue engineering scaffolds. Covalently cross-linked gels with permanent pores were formed under cryogenic conditions by free-radical copolymerization of poly[N(5)-(2-hydroxyethyl)-L-glutamine-stat-N(5)-(2-methacryloyl-oxy-ethyl)-L-glutamine] (PHEG-MA) with 2-hydrohyethyl methacrylate (HEMA) and, optionally, N-propargyl acrylamide (PrAAm) as minor comonomers. The morphology of the cryogels showed interconnected polyhedral or laminar pores. The volume content of communicating water-filled pores was >90%. The storage moduli of the swollen cryogels were in the range of 1-6 kPa, even when the water content was >95%. The enzymatic degradation of a cryogel corresponded to the decrease in its storage modulus during incubation with papain, a model enzyme with specificity analogous to wound-healing enzymes. It was shown that cryogels with incorporated alkyne groups can easily be modified with short synthetic peptides using azide-alkyne cycloaddition "click" chemistry, thus providing porous hydrogel scaffolds with biomimetic features.

Toward structured macroporous hydrogel composites: electron beam-initiated polymerization of layered cryogels.

The ability to tailor mechanical properties and architecture is crucial in creating macroporous hydrogel scaffolds for tissue engineering. In the present work, a technique for the modification of the pore size and stiffness of acrylamide-based cryogels is demonstrated via the regulation of an electron beam irradiation dose. The samples were characterized by equilibrium swelling measurements, light and scanning electron microscopy, mercury porosimetry, Brunauer-Emmett-Teller surface area analysis, and stiffness measurements. Their properties were compared to cryogels prepared by a standard redox-initiated radical polymerization. A (125)I radiolabeled azidopentanoyl-GGGRGDSGGGY-NH2 peptide was bound to the surface to determine the concentration of the adhesive sites available for biomimetic modification. The functionality of the prepared substrates was evaluated by in vitro cultivation of adipose-derived stem cells. Moreover, the feasibility of preparing layered cryogels was demonstrated. This may be the key to the future preparation of complex hydrogel-based scaffolds to mimic the extracellular microenvironment in a wide range of applications.

Poly(N-allyl acrylamide) as a Reactive Platform toward Functional Hydrogels.

The synthesis of poly(N-allyl acrylamide) (PNAllAm) as a platform for the preparation of functional hydrogels is described. The PNAllAm was synthesized via organocatalyzed amidation of poly(methyl acrylate) (PMA) with allylamine and characterized by 1H NMR spectroscopy, size exclusion chromatography (SEC), and turbidimetry, which allowed an estimation of the lower critical solution temperature of ∼26 °C in water. The PNAllAm was then used to make functional hydrogels via photoinitiated thiol-ene chemistry, where dithiothreitol (DTT) was used to cross-link the polymer chains. In addition, mercaptoethanol (ME) was added as a functional thiol to modulate the hydrogel properties. A decrease of the volume-phase transition temperature of the resulting hydrogels was observed with increasing ME content. Altogether this work introduces a straightforward way for the preparation of PNAllAm from PMA and demonstrates its value as a reactive polymer platform for the generation of functional hydrogels.

Nanoscale TEM Imaging of Hydrogel Network Architecture.

In this work, the authors succeed in direct visualization of the network structure of synthetic hydrogels with transmission electron microscopy (TEM) by developing a novel staining and network fixation method. Such a direct visualization is not carried out because sample preparation and obtaining sufficient contrast are challenging for these soft materials. TEM images reveal robust heterogeneous network architectures at mesh size scale and defects at micro-scale. TEM images also reveal the presence of abundant dangling chains on the surface of the hydrogel network. The real space structural information provides a comprehensive perspective that links bulk properties with a nanoscale network structure, including fracture, adhesion, sliding friction, and lubrication. The presented method has the potential to advance the field.

Engineering of an electrically charged hydrogel implanted into a traumatic brain injury model for stepwise neuronal tissue reconstruction.

Neural regeneration is extremely difficult to achieve. In traumatic brain injuries, the loss of brain parenchyma volume hinders neural regeneration. In this study, neuronal tissue engineering was performed by using electrically charged hydrogels composed of cationic and anionic monomers in a 1:1 ratio (C1A1 hydrogel), which served as an effective scaffold for the attachment of neural stem cells (NSCs). In the 3D environment of porous C1A1 hydrogels engineered by the cryogelation technique, NSCs differentiated into neuroglial cells. The C1A1 porous hydrogel was implanted into brain defects in a mouse traumatic damage model. The VEGF-immersed C1A1 porous hydrogel promoted host-derived vascular network formation together with the infiltration of macrophages/microglia and astrocytes into the gel. Furthermore, the stepwise transplantation of GFP-labeled NSCs supported differentiation towards glial and neuronal cells. Therefore, this two-step method for neural regeneration may become a new approach for therapeutic brain tissue reconstruction after brain damage in the future.

Enzymatic degradation of the hydrogels based on synthetic poly(α-amino acid)s.

Biodegradable hydrogels are studied as potential scaffolds for soft tissue regeneration. In this work biodegradable hydrogels were prepared from synthetic poly(α-amino acid)s, poly(AA)s. The covalently crosslinked gels were formed by radical copolymerization of methacryloylated poly(AA)s, e.g. poly[N (5)-(2-hydroxy-ethyl)-L-glutamine-ran-L-alanine-ran-N (6)-methacryloyl-L-lysine], as a multifunctional macro-monomer with a low-molecular-weight methacrylic monofunctional monomer, e.g. 2-hydroxyethyl methacrylate (HEMA). Methacryloylated copolypeptides were synthesized by polymerization of N-carboxyanhydrides of respective amino acids and subsequent side-chain modification. Due to their polypeptide backbone, synthetic poly(AA)s are cleavable in biological environment by enzyme-catalyzed hydrolysis. The feasibility of enzymatic degradation of poly(AA)s alone and the hydrogels made from them was studied using elastase, a matrix proteinase involved in tissue healing processes, as a model enzyme. Specificity of elastase for cleavage of polypeptide chains behind the L-alanine residues was reflected in faster degradation of L-alanine-containing copolymers as well as of hydrogels composed of them.

Correction: Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules.

Correction for 'Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules' by Naresh Kasoju et al., Biomater. Sci., 2020, DOI: 10.1039/c9bm01280j.

Bioengineering a pre-vascularized pouch for subsequent islet transplantation using VEGF-loaded polylactide capsules.

The effectiveness of cell transplantation can be improved by optimization of the transplantation site. For some types of cells that form highly oxygen-demanding tissue, e.g., pancreatic islets, a successful engraftment depends on immediate and sufficient blood supply. This critical point can be avoided when cells are transplanted into a bioengineered pre-vascularized cavity which can be formed using a polymer scaffold. In our study, we tested surface-modified poly(lactide-co-caprolactone) (PLCL) capsular scaffolds containing the pro-angiogenic factor VEGF. After each modification step (i.e., amination and heparinization), the surface properties and morphology of scaffolds were characterized by ATR-FTIR and XPS spectroscopy, and by SEM and AFM. All modifications preserved the gross capsule morphology and maintained the open pore structure. Optimized aminolysis conditions decreased the Mw of PLCL only up to 10% while generating a sufficient number of NH2 groups required for the covalent immobilization of heparin. The heparin layer served as a VEGF reservoir with an in vitro VEGF release for at least four weeks. In vivo studies revealed that to obtain highly vascularized PLCL capsules (a) the optimal VEGF dose for the capsule was 50 µg and (b) the implantation time was four weeks when implanted into the greater omentum of Lewis rats; dense fibrous tissue accompanied by vessels completely infiltrated the scaffold and created sparse granulation tissue within the internal cavity of the capsule. The prepared pre-vascularized pouch enabled the islet graft survival and functioning for at least 50 days after islet transplantation. The proposed construct can be used to create a reliable pre-vascularized pouch for cell transplantation.

Polymer scaffolds with no skin-effect for tissue engineering applications fabricated by thermally induced phase separation.

Thermally induced phase separation (TIPS) based methods are widely used for the fabrication of porous scaffolds for tissue engineering and related applications. However, formation of a less-/non-porous layer at the scaffold's outer surface at the air-liquid interface, often known as the skin-effect, restricts the cell infiltration inside the scaffold and therefore limits its efficacy. To this end, we demonstrate a TIPS-based process involving the exposure of the just quenched poly(lactide-co-caprolactone):dioxane phases to the pure dioxane for a short time while still being under the quenching strength, herein after termed as the second quenching (2Q). Scanning electron microscopy, mercury intrusion porosimetry and contact angle analysis revealed a direct correlation between the time of 2Q and the gradual disappearance of the skin, followed by the widening of the outer pores and the formation of the fibrous filaments over the surface, with no effect on the internal pore architecture and the overall porosity of scaffolds. The experiments at various quenching temperatures and polymer concentrations revealed the versatility of 2Q in removing the skin. In addition, the in vitro cell culture studies with the human primary fibroblasts showed that the scaffolds prepared by the TIPS based 2Q process, with the optimal exposure time, resulted in a higher cell seeding and viability in contrast to the scaffolds prepared by the regular TIPS. Thus, TIPS including the 2Q step is a facile, versatile and innovative approach to fabricate the polymer scaffolds with a skin-free and fully open porous surface morphology for achieving a better cell response in tissue engineering and related applications.

Direct laser writing of synthetic poly(amino acid) hydrogels and poly(ethylene glycol) diacrylates by two-photon polymerization.

The additive manufacturing technique of direct laser writing by two-photon polymerization (2PP-DLW) enables the fabrication of three-dimensional microstructures with superior accuracy and flexibility. When combined with biomimetic hydrogel materials, 2PP-DLW can be used to recreate the microarchitectures of the extracellular matrix. However, there are currently only a limited number of hydrogels applicable for 2PP-DLW. In order to widen the selection of synthetic biodegradable hydrogels, in this work we studied the 2PP-DLW of methacryloylated and acryloylated poly(α-amino acid)s (poly(AA)s). The performance of these materials was compared to widely used poly(ethylene glycol) diacrylates (PEGdas) in terms of polymerization and damage thresholds, voxel size, line width, post-polymerization swelling and deformation. We found that both methacryloylated and acryloylated poly(AA) hydrogels are suitable to 2PP-DLW with a wider processing window than PEGdas. The poly(AA) with the highest degree of acryloylation showed the greatest potential for 3D microfabrication.