RESUMO
High pressure X-ray diffraction, Raman scattering, and electrical measurements, together with theoretical calculations, which include the analysis of the topological electron density and electronic localization function, evidence the presence of an isostructural phase transition around 2 GPa, a Fermi resonance around 3.5 GPa, and a pressure-induced decomposition of SnSb2Te4 into the high-pressure phases of its parent binary compounds (α-Sb2Te3 and SnTe) above 7 GPa. The internal polyhedral compressibility, the behavior of the Raman-active modes, the electrical behavior, and the nature of its different bonds under compression have been discussed and compared with their parent binary compounds and with related ternary materials. In this context, the Raman spectrum of SnSb2Te4 exhibits vibrational modes that are associated but forbidden in rocksalt-type SnTe; thus showing a novel way to experimentally observe the forbidden vibrational modes of some compounds. Here, some of the bonds are identified with metavalent bonding, which were already observed in their parent binary compounds. The behavior of SnSb2Te4 is framed within the extended orbital radii map of BA2Te4 compounds, so our results pave the way to understand the pressure behavior and stability ranges of other "natural van der Waals" compounds with similar stoichiometry.
RESUMO
α(R)-In2Se3 has been experimentally and theoretically studied under compression at room temperature by means of X-ray diffraction and Raman scattering measurements as well as by ab initio total-energy and lattice-dynamics calculations. Our study has confirmed the α ( R3 m) â ß' ( C2/ m) â ß ( R3Ì m) sequence of pressure-induced phase transitions and has allowed us to understand the mechanism of the monoclinic C2/ m to rhombohedral R3Ì m phase transition. The monoclinic C2/ m phase enhances its symmetry gradually until a complete transformation to the rhombohedral R3Ì m structure is attained above 10-12 GPa. The second-order character of this transition is the reason for the discordance in previous measurements. The comparison of Raman measurements and lattice-dynamics calculations has allowed us to tentatively assign most of the Raman-active modes of the three phases. The comparison of experimental results and simulations has helped to distinguish between the different phases of In2Se3 and resolve current controversies.
RESUMO
Manipulating properties of matter at the nanoscale is the essence of nanotechnology, which has enabled the realization of quantum dots, nanotubes, metamaterials, and two-dimensional materials with tailored electronic and optical properties. Two-dimensional semiconductors have revealed promising perspectives in nanotechnology. However, the tunability of their physical properties is challenging for semiconductors studied until now. Here we show the ability of morphological manipulation strategies, such as nanotexturing or, at the limit, important surface roughness, to enhance light absorption and the luminescent response of atomically thin indium selenide nanosheets. Besides, quantum-size confinement effects make this two-dimensional semiconductor to exhibit one of the largest band gap tunability ranges observed in a two-dimensional semiconductor: from infrared, in bulk material, to visible wavelengths, at the single layer. These results are relevant for the design of new optoelectronic devices, including heterostructures of two-dimensional materials with optimized band gap functionalities and in-plane heterojunctions with minimal junction defect density.
RESUMO
The high-pressure structural behavior of 30 nm nanoparticles of anatase TiO2 was studied under hydrostatic and quasi-hydrostatic conditions up to 25 GPa. We found that the structural sequence is not sensitive to the use of different pressure transmitting media. Anatase-type nanoparticles exhibit a phase transition beyond 12 GPa toward a baddeleyite-type structure. Under decompression this phase transition is irreversible, and a metastable columbite-type structure is recovered at ambient conditions. The bulk modulus of anatase-type nanoparticles was determined confirming that nanoparticles of TiO2 are more compressible than bulk TiO2. Similar conclusions were obtained after the determination of the bulk modulus of baddeleyite-type nanoparticles. Furthermore, axial compressibilities and the effect of pressure in atomic positions, bond distances, and bond angles are determined. Finally, a possible physical explanation for the destabilization of anatase under pressure is proposed based upon this information.
RESUMO
A study based on photoluminescence and absorption measurements as a function of temperature and pressure for PbSe nanocrystals with sizes in the range 3-13 nm reveals the influence of size quantum confinement on the observed variation. In the case of the temperature variation, the effective bandgap changes from showing a positive rate of change to showing a negative one (for a quantum dot 3 nm in diameter), which can be accounted for by incorporating a linear variation of the carrier effective masses into a simple calculation of the exciton ground state in the quantum dot. In the case of the pressure variation, we observe a clear inverse correlation between the absolute value of the pressure coefficient and the nanocrystal size, a signature of quantum size confinement, with values changing from -76 to -41 meV GPa⻹ for quantum dots ranging from 13 to 3 nm in diameter, respectively, clearly smaller in absolute value than the rate for bulk PbSe (-84 meV GPa⻹). We used again the hypothesis of a linear variation of the carrier effective masses with pressure in order to fit this experimental variation quantitatively.
RESUMO
The first pressure-induced solid-phase synthesis of a zeolite has been found through compression of a common zeolite, ITQ-29 (see scheme, Si yellow, O red). The new microporous structure, ITQ-50, has a unique structure and improved performance for propene/propane separation with respect the parent material ITQ-29.
RESUMO
We report diffuse reflectivity measurements in InNbO4, ScNbO4, YNbO4, and eight rare-earth niobates. A comparison with established values of the bandgap of InNbO4 and ScNbO4 shows that Tauc plot analysis gives erroneous estimates of the bandgap energy. Conversely, accurate results are obtained considering excitonic contributions using the Elliot-Toyozawa model. The bandgaps are 3.25 eV for CeNbO4, 4.35 eV for LaNbO4, 4.5 eV for YNbO4, and 4.73-4.93 eV for SmNbO4, EuNbO4, GdNbO4, DyNbO4, HoNbO4, and YbNbO4. The fact that the bandgap energy is affected little by the rare-earth substitution from SmNbO4 to YbNbO4 and the fact that they have the largest bandgap are a consequence of the fact that the band structure near the Fermi level originates mainly from Nb 4d and O 2p orbitals. YNbO4, CeVO4, and LaNbO4 have smaller bandgaps because of the contribution from rare-earth atom 4d, 5d, or 4f orbitals to the states near the Fermi level.
RESUMO
Optical measurements under externally applied stresses allow us to study the materials' electronic structure by comparing the pressure evolution of optical peaks obtained from experiments and theoretical calculations. We examine the stress-induced changes in electronic structure for the thermodynamically stable 1T polytype of selected MX2 compounds (M=Hf, Zr, Sn; X=S, Se), using the density functional theory. We demonstrate that considered 1T-MX2 materials are semiconducting with indirect character of the band gap, irrespective to the employed pressure as predicted using modified Becke-Johnson potential. We determine energies of direct interband transitions between bands extrema and in band-nesting regions close to Fermi level. Generally, the studied transitions are optically active, exhibiting in-plane polarization of light. Finally, we quantify their energy trends under external hydrostatic, uniaxial, and biaxial stresses by determining the linear pressure coefficients. Generally, negative pressure coefficients are obtained implying the narrowing of the band gap. The semiconducting-to-metal transition are predicted under hydrostatic pressure. We discuss these trends in terms of orbital composition of involved electronic bands. In addition, we demonstrate that the measured pressure coefficients of HfS2 and HfSe2 absorption edges are in perfect agreement with our predictions. Comprehensive and easy-to-interpret tables containing the optical features are provided to form the basis for assignation of optical peaks in future measurements.
RESUMO
The pressure dependence of the direct and indirect bandgap transitions of hexagonal boron nitride is investigated using optical reflectance under hydrostatic pressure in an anvil cell with sapphire windows up to 2.5 GPa. Features in the reflectance spectra associated with the absorption at the direct and indirect bandgap transitions are found to downshift with increasing pressure, with pressure coefficients of -26 ± 2 and -36 ± 2 meV GPa-1, respectively. The GW calculations yield a faster decrease of the direct bandgap with pressure compared to the indirect bandgap. Including the strong excitonic effects through the Bethe-Salpeter equation, the direct excitonic transition is found to have a much lower pressure coefficient than the indirect excitonic transition. This suggests a strong variation of the binding energy of the direct exciton with pressure. The experiments corroborate the theoretical predictions and indicate an enhancement of the indirect nature of the bulk hexagonal boron nitride crystal under hydrostatic pressure.
RESUMO
We explore the potential of Tb- and Yb-doped InVO4, InTaO4, and InNbO4 for applications as phosphors for light-emitting sources. Doping below 0.2% barely change the crystal structure and Raman spectrum but provide optical excitation and emission properties in the visible and near-infrared (NIR) spectral regions. From optical measurements, the energy of the first/second direct band gaps was determined to be 3.7/4.1 eV in InVO4, 4.7/5.3 in InNbO4, and 5.6/6.1 eV in InTaO4. In the last two cases, these band gaps are larger than the fundamental band gap (being indirect gap materials), while for InVO4, a direct band gap semiconductor, the fundamental band gap is at 3.7 eV. As a consequence, this material shows a strong self-activated photoluminescence centered at 2.2 eV. The other two materials have a weak self-activated signal at 2.2 and 2.9 eV. We provide an explanation for the origin of these signals taking into account the analysis of the polyhedral coordination around the pentavalent cations (V, Nb, and Ta). Finally, the characteristic green (5D4 â 7F J ) and NIR (2F5/2 â 2F7/2) emissions of Tb3+ and Yb3+ have been analyzed and explained.
RESUMO
The effect of applied pressure on the magnetic properties of the Prussian blue analogue K0.4Fe4[Cr(CN)6]2.8 x 16 H2O (1) has been analyzed by dc and ac magnetic susceptibility measurements. Under ambient conditions, 1 orders ferromagnetically at a critical temperature (T(C)) of 18.5 K. Under application of pressure in the 0-1200 MPa range, the magnetization of the material decreases and its critical temperature shifts to lower temperatures, reaching T(C) = 7.5 K at 1200 MPa. Pressure-dependent Raman and Mossbauer spectroscopy measurements show that this striking behavior is due to the isomerization of some Cr(III)-C[triple bond]N-Fe(II) linkages to the Cr(III)-N[triple bond]C-Fe(II) form. As a result, the ligand field around the iron(II) centers increases, and the diamagnetic low-spin state is populated. As the number of diamagnetic centers in the cubic lattice increases, the net magnetization and critical temperature of the material decrease considerably. The phenomenon is reversible: releasing the pressure restores the magnetic properties of the original material. However, we have found that under more severe pressure conditions, a metastable sample containing 22% Cr(III)-N[triple bond]C-Fe(II) linkages can be obtained. X-ray absorption spectroscopy and magnetic circular dichroism of this metastable sample confirm the linkage isomerization process.
Assuntos
Compostos de Cromo/química , Cianetos/química , Compostos de Ferro/química , Magnetismo , Pressão , Água/química , Raios X , Cristalização , Isomerismo , Análise Espectral , Temperatura , Difração de Raios XRESUMO
We investigate the structural response of a dense peptide metal-organic framework using in situ powder and single-crystal X-ray diffraction under high-pressures. Crystals of Zn(GlyTyr)2 show a reversible compression by 13% in volume at 4 GPa that is facilitated by the ability of the peptidic linker to act as a flexible string for a cooperative response of the structure to strain. This structural transformation is controlled by changes to the conformation of the peptide, which enables a bond rearrangement in the coordination sphere of the metal and changes to the strength and directionality of the supramolecular interactions specific to the side chain groups in the dipeptide sequence. Compared to other structural transformations in Zn(ii) peptide MOFs, this behaviour is not affected by host/guest interactions and relies exclusively on the conformational flexibility of the peptide and its side chain chemistry.
RESUMO
This paper reports the pressure-dependent photoluminescence and Raman spectral investigation of hydrothermally synthesized ZnO nanoflowers at room temperature. Intrinsic near-band-edge UV emission from ZnO nanoflowers is monotonously blue-shifted under pressures up to 13.8 GPa with a pressure coefficient of 26 meV GPa(-1), and this pressure value is nearly 5 GPa above the transition pressure from the wurtzite to the rock salt phase for bulk ZnO. The Raman band corresponds to the wurtzite phase, the [Formula: see text] and [Formula: see text] modes were observed up to about 11 GPa from the spectra. The apparent discrepancy in the transition pressures as determined from photoluminescence and Raman studies suggests that it is a consequence of the gradual phase transition, in which the smallest nanoparticles are expected to remain in the wurtzite phase up to 13-15 GPa.
RESUMO
Objetivo: Evaluar, desde el punto de vista clínico y económico, el uso de la anestesia local en la cirugía descompresiva del síndrome del túnel carpiano. Material y métodos: Se evaluaron 229 cirugías descompresivas, realizadas mediante la técnica quirúrgica clásica a cielo abierto. En 138 casos se empleó anestesia local pura en el lugar de la incisión, en 71 la técnica empleada fue la anestesia locorregional intravenosa, y 20 pacientes fueron intervenidos mediante anestesia del plexo braquial. Se evaluó la tolerancia del paciente a la técnica anestésica, mediante la escala analógica visual, referida al dolor durante la aplicación de la anestesia, al dolor del manguito de isquemia y al dolor del paciente durante la intervención. Se evaluaron los resultados finales de la intervención y los costes aproximados de la misma según la anestesia empleada. Resultados: Los resultados finales de la descompresión, así como la frecuencia de complicaciones posquirúrgicas, no estuvieron influidas por el tipo de técnica anestésica empleada. En ninguno de los pacientes en los que se planteó la intervención con anestesia local fue necesario cambiar de técnica. El bloqueo del plexo braquial se acompañó de una mayor duración de la intervención. En los pacientes intervenidos con anestesia local, la tolerancia del manguito de isquemia fue excelente, al igual que la percepción de dolor durante la intervención. Conclusiones: El uso de anestesia local en la cirugía del síndrome del túnel carpiano se tolera bien por parte del paciente y disminuye el coste de dicha intervención (AU)