Pyrrolidium- and Imidazolium-Based Ionic Liquids and Electrolytes with Flexible Oligoether Anions.

A new class of fluorine-free ionic liquids (ILs) and electrolytes based on aliphatic flexible oligoether anions, 2-(2-methoxyethoxy)acetate (MEA) and 2-[2-(2-methoxyethoxy)ethoxy]acetate (MEEA), coupled with pyrrolidinium and imidazolium cations is introduced. For the ILs with MEEA anions, Li+ conducting electrolytes are created by doping the ILs with 30 mol % of LiMEEA. The structural flexibility of the oligoether functionality in the anion results in glass transition temperatures (Tg) as low as -60 °C for the neat ILs and the electrolytes. The imidazolium-based ILs and electrolytes reveal better thermal stabilities but higher Tg and lower electrochemical stabilities than the corresponding pyrrolidinium-based analogues. All neat ILs show comparable transport properties for the cations and these decrease by the addition of lithium salt - the pyrrolidinium-based electrolyte being affected the most.

Quantifying and Decoupling Molecular Interactions of Ionic Liquids with Gold Electrodes.

This work combined gold colloid probe atomic force microscopy (AFM) with a quartz crystal microbalance (QCM) to accurately quantify the molecular interactions of fluorine-free phosphonium-based ionic liquids (ILs) with gold electrode surfaces. First, the interactions of ILs with the gold electrode per unit area (FA', N/m2) were obtained via the force-distance curves measured by gold probe AFM. Second, a QCM was employed to detect the IL amount to acquire the equilibrium number of IL molecules adsorbed onto the gold electrode per unit area (NIL, Num/m2). Finally, the quantified molecular interactions of ILs with the gold electrode (F0, nN/Num) were estimated. F0 is closely related to the IL composition, in which the IL with the same anion but a longer phosphonium cation exhibits a stronger molecular interaction. The changes in the quantified interactions of gold with different ILs are consistent with the interactions predicted by the extended Derjaguin-Landau-Verwey-Overbeek theory, and the van der Waals interaction was identified as the major contribution of the overall interaction. The quantified molecular interaction is expected to enable the direct experimental-derived interaction parameters for molecular simulations and provide the virtual design of novel ILs for energy storage applications.

Cation Chain Length of Nonhalogenated Ionic Liquids Matters in Enhancing SERS of Cytochrome c on Zr-Al-Co-O Nanotube Arrays.

Surface-enhanced Raman scattering (SERS) is a remarkably powerful analytical technique enabling trace-level detection of biological molecules. The interaction of a probe molecule with the SERS substrate shows important distinctions in the SERS spectra, providing inherent fingerprint information on the probe molecule. Herein, nonhalogenated phosphonium-based ionic liquids (ILs) containing cations with varying chain lengths were used as trace additives to amplify the interaction between the cytochrome c (Cyt c) and Zr-Al-Co-O (ZACO) nanotube arrays, strengthening the SERS signals. An increased enhancement factor (EF) by 2.5-41.2 times compared with the system without ILs was achieved. The improvement of the SERS sensitivity with the introduction of these ILs is strongly dependent on the cation chain length, in which the increasing magnitude of EF is more pronounced in the system with a longer alkyl chain length on the cation. Comparing the interaction forces measured by Cyt c-grafted atomic force microscopy (AFM) probes on ZACO substrates with those predicted by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, the van der Waals forces became increasingly dominant as the chain length of the cations increased, associated with stronger Cyt c-ZACO XDLVO interaction forces. The major contributing component, van der Waals force, stems from the longer cation chains of the IL, which act as a bridge to connect Cyt c and the ZACO substrate, promoting the anchoring of the Cyt c molecules onto the substrate, thereby benefiting SERS enhancement.

Nanoconfinement effects on the dynamics of an ionic liquid-based electrolyte probed by multinuclear NMR.

The measurement of ion diffusivity inside nanoporous materials by Pulsed-Field Gradient (PFG) NMR is not an easy task due to enhanced NMR relaxation. Here, we employed multinuclear (1H, 31P, and 7Li) NMR spectrometry and diffusometry to probe ion dynamics of a fluorine-free battery electrolyte comprising the [P4,4,4,4][MEEA] ionic liquid (IL) and LiMEEA salt in a 7 : 3 molar ratio, confined in three different nanoporous SiO2 glasses with pore diameters of 3.7, 7 and 98 nm. Confinement of the electrolyte leads to NMR resonance line broadening and variation in the 31P and 7Li NMR chemical shifts. The complicated diffusion decays are explained taking into consideration the complex porous structure of the porous glasses, the presence of pore "necks" and the "partially isolated volumes" containing the liquid, which is in a "slow exchange" regime with the rest of the liquid. The mean apparent diffusivity is controlled by the exchange of ions between the "narrow" and the "large" pores and the boundary separating these pores to measure diffusion coefficients by PFG NMR is in the range of pore sizes of Vycor and Varapor. The temperature-dependent ion diffusivities in the "large" pores deviate from the Arrhenius law and the exchange of diffusing units between the "narrow" and the "large" pores leads to abnormal temperature-dependent diffusion coefficients. Like the bulk, diffusivity of the small Li+ is slower than that of the larger organic ions in the confinement, demonstrating the solvation of Li+ inside the pores.

Ionic Liquids and Electrolytes with Flexible Aromatic Anions.

Five new n-tetrabutylphosphonium (P4444 )+ cation-based ionic liquids (ILs) with oligoether substituted aromatic carboxylate anions have been synthesized. The nature and position of the oligoether chain affect thermal stability (up to 330 °C), phase behaviour (Tg <-55 °C) and ion transport. Furthermore, with the aim of application in lithium batteries, electrolytes were created for two of the ILs by 10 mol% doping using the corresponding Li-salts. This affects the ion diffusion negatively, from being higher and equal for cations and anions to lower for all ions and unequal. This is due to the stronger ionic interactions and formation of aggregates, primarily between the Li+ ions and the carboxylate group of the anions. Electrochemically, the electrolytes have electrochemical stability windows up to 3.5 V, giving some promise for battery application.

Effect of Electrode Surface Chemistry on Ion Structuring of Imidazolium Ionic Liquids.

Surface chemistry plays a critical role in the ion structuring of ionic liquids (ILs) at the interfaces of electrodes and controls the overall energy storage performance of the system. Herein, we functionalized the gold (Au) colloid probe of an atomic force microscope with -COOH and -NH2 groups to explore the effect of different surface chemical properties on the ion structuring of an IL. Aided by colloid-probe atomic force microscopy (AFM), the ion structuring of an imidazolium IL, 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6], abbreviated as BP hereafter), on the Au electrode surface and the ion response to the change in the surface chemistry are investigated. AFM morphologies, contact angles, and approaching force-distance curves of the BP IL on the functionalized Au surfaces exhibited that the IL forms a more obvious layering structure on the -COOH-terminated Au surface (Au-COOH), while it forms heterogeneous and aggregating droplets on the -NH2 surface (Au-NH2). The formed uniform and aggregation-free ion layers in the vicinity of the Au-COOH surface are due to the π-π+ stacking interaction between the delocalized π+ electrons from the imidazolium ring in the IL [BMIM]+ cation and the localized π electrons from the sp2 carbon on the -COOH group. The in situ observation of nano-friction and torsional resonance frequency at the IL-electrode interfaces further demonstrated the ion structuring of the IL at Au-COOH, which results in a more sensitive electrochemical response associated with a faster capacitive process.

Structurally flexible pyrrolidinium- and morpholinium-based ionic liquid electrolytes.

Ion transport measures and details as well as physico-chemical and electrochemical properties are presented for a small set of structurally flexible pyrrolidinium (Pyrr) and morpholinium (Morph) cation-based ionic liquids (ILs), all with oligoether phosphate-based anions. All have high thermal stabilities, low glass transition temperatures, and wide electrochemical stability windows, but rather moderate ionic conductivities, where both the anions and the cations of the Pyrr-based ILs diffuse faster than those of the Morph-based ILs. Overall, the Pyrr-based ILs show significantly more promise as high-temperature supercapacitor electrolytes, rendering a specific capacitance of 164 F g-1 at 1 mV s-1, a power density of 609 W kg-1 and a specific energy density of 27 W h kg-1 at 90 °C in a symmetric graphite supercapacitor.

Aromatic heterocyclic anion based ionic liquids and electrolytes.

Five new ionic materials comprising fluorine-free aromatic heterocyclic anions based on pyridine and pyrazine combined with a common n-tetrabutylphosphonium cation, (P4444)+, result in two room temperature ionic liquids (RTILs), one semi-solid, and two organic ionic plastic crystals (OIPCs) with melting points >20 °C. The OIPCs showed a plastic crystalline phase, multiple solid-solid transitions, and plastic crystalline and melt phases. For both the neat RTILs and the Li+ conducting electrolytes, the nature and strength of the ion-ion interactions mainly depend on the position of the nitrogen atom with respect to the carboxylate group in the anions. Furthermore, for the RTILs the ionic conductivity is effected by the electronic structure and flexibility of the ions and the anions diffuse faster than the (P4444)+ cation, but are slowed down in the electrolytes due to the strong electrostatic interactions between the carboxylate group of the anions and the Li+, as shown both experimentally and computationally. Overall, this study describes the effect of structural tuning of aromatic anions on the ion-ion interactions and introduces new ionic materials with promising properties to be used as solid and liquid electrolytes in energy storage devices.

Physical and electrochemical properties of new structurally flexible imidazolium phosphate ionic liquids.

New structurally flexible 1-methyl- and 1,2-dimethyl-imidazolium phosphate ionic liquids (ILs) bearing oligoethers have been synthesized and thoroughly characterized. These novel ILs revealed high thermal stabilities, low glass transitions, high conductivity and wide electrochemical stability windows up to 6 V. Both the cations and anions of 1-methyl-imidazolium ILs diffuse faster than the ions of 1,2-dimethyl-imidazolium ILs, as determined by pulsed field gradient nuclear magnetic resonance (PFG-NMR). The 1-methyl-imidazolium phosphate ILs showed relatively higher ionic conductivities and ion diffusivity as compared with the 1,2-dimethyl-imidazolium phosphate ILs. As expected, the diffusivity of all the ions increases with an increase in the temperature. The 1-methyl-imidazolium phosphate ILs formed hydrogen bonds with the phosphate anions, the strength of which is decreased with increasing temperature, as confirmed by variable temperature 1H and 31P NMR spectroscopy. One of the representative IL, [EmDMIm][DEEP], presented promising elevated temperature performance as an electrolyte in a supercapacitor composed of multiwall carbon nanotubes and activated charcoal (MWCNT/AC) composite electrodes.

Microstructural probing of phosphonium-based ionic liquids on a gold electrode using colloid probe AFM.

Atomic force microscopy (AFM) with a gold colloid probe modeled as the electrode surface is employed to directly capture the contact resonance frequency of two phosphonium-based ionic liquids (ILs) containing a common anion [BScB]- and differently lengthened cations ([P6,6,6,14]+ and [P4,4,4,8]+). The comparative interfacial studies are performed by creating IL films on the surface of gold, followed by measuring the wettability, thickness of the films, adhesion forces, surface morphology and AFM-probed contact resonance frequency. In addition, the cyclic voltammetry and impedance spectroscopy measurements of the neat ILs are measured on the surface of the gold electrode. The IL with longer cation alkyl chains exhibits a well-defined thin film on the electrode surface and enhanced the capacitance than the shorter chain IL. The AFM contact resonance frequency and force curves reveal that the longer IL prefers to form stiffer ion layers at the gold electrode surface, suggesting the "…anion-anion-cation-cation…" bilayer structure, in contrast, the shorter-chain IL forms the softer cation-anion alternating structure, i.e., "…anion-cation-anion-cation…".

Molecular interactions of ionic liquids with SiO2 surfaces determined from colloid probe atomic force microscopy.

Ionic liquids (ILs) interact strongly with many different types of solid surfaces in a wide range of applications, e.g. lubrication, energy storage and conversion, etc. However, due to the nearly immeasurable large number of potential ILs available, identifying the appropriate ILs for specific solid interfaces with desirable properties is a challenge. Theoretical studies are highly useful for effective development of design and applications of these complex molecular systems. However, obtaining reliable force field models and interaction parameters is highly demanding. In this work, we apply a new methodology by deriving the interaction parameters directly from the experimental data, determined by colloid probe atomic force microscopy (CP-AFM). The reliability of the derived interaction parameters is tested by performing molecular dynamics simulations to calculate translational self-diffusion coefficients and comparing them with those obtained from NMR diffusometry.

Transition anionic complex in trihexyl(tetradecyl)phosphonium-bis(oxalato)borate ionic liquid - revisited.

It was found that Li[BOB]·nH2O salts were not readily suitable for the synthesis of high-purity orthoborate-based tetraalkylphosphonium ionic liquids, as exemplified here for trihexyl(tetradecyl)phosphonium bis(oxalato)borate, [P6,6,6,14][BOB]; along with [BOB]-, a metastable transition anionic complex (TAC) of dihydroxy(oxalato)borate with oxalic acid, [B(C2O4)(OH)2·(HOOC-COOH)]-, was also formed and passed into the ionic liquid in the course of the metathesis reaction with trihexyl(tetradecyl)phosphonium chloride. On the contrary, Na[BOB] was found to be a more suitable reagent for the synthesis of this IL, because [BOB]- anions safely passed into the final IL without hydrolysis, when metathesis reactions were performed using aqueous-free media. Since ultra-pure Na[BOB] is not commercially available, in this work, a preparation protocol for ultra-pure (>99%) Na[BOB] was developed: (i) molar ratios of boric and oxalic acids were optimised to minimise boron-containing impurities, (ii) the Na[BOB] product was thoroughly purified by sequential washing of a fine powder product in hot acetonitrile and ethanol and (iii) characterised using powder X-ray diffraction and solid-state 11B MAS NMR spectroscopy. The physico-chemical properties of the prepared boron-impurity-free IL, i.e., its density, viscosity, electric conductivity, glass-transition temperature and thermal stability, were found to be significantly different from those of the previously reported [P6,6,6,14][BOB], containing ca. 45 mol% of TAC, [B(C2O4)(OH)2·(HOOC-COOH)]-. It was found that a high-purity [P6,6,6,14][BOB] prepared in this work has a considerably lower viscosity, a higher viscosity index and a wider electro-chemical window (ECW) compared to those of the sample of [P6,6,6,14][BOB] with ca. 45 mol% of TAC. Interestingly, [B(C2O4)(OH)2·(HOOC-COOH)]- in the latter sample almost completely transformed into [BOB]- anions upon heating of the IL sample at 413 K for 1 hour, as confirmed using both 11B and 13C NMR. Therefore, in this work, apart from a well-optimised synthetic protocol for boron-impurity-free [P6,6,6,14][BOB], implications of boron-containing transition anionic complexes in tetraalkylphosphonium-orthoborate ILs used in different applications were highlighted.

Controlling the nanoscale friction by layered ionic liquid films.

The nanofriction coefficient of ionic liquids (ILs), 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), on the surfaces of mica and graphite was investigated using atomic force microscopy (AFM). A pronounced layered spatial distribution was found in the IL film formed on the solid substrates and can be divided into 3 well distinguishable regions exhibiting different physical properties with increasing distance from the substrate. We found that the friction coefficient (µ) increases monotonically as the layering thickness decreases, no matter what the thickness of the bulk IL is. This suggests that the layering assembled IL at solid surfaces is more important than the bulk phase in determining the magnitude of the nanoscale friction. The increase in the friction coefficient as the layering thickness decreases is most likely attributed to the assembled ordered IL layers closer to the substrate surfaces having a greater activation barrier for unlocking the surfaces to allow shear.

The effect of nanoscale friction of mesoporous carbon supported ionic liquids on the mass transfer of CO2 adsorption.

Supported ionic liquids (ILs) are attractive alternatives for CO2 capture and the thickness of supported IL films plays a critical role in the CO2 mass transfer rate. However, the dependence of CO2 uptake on the IL film thickness differs as the system varies. In this work, atomic force microscopy (AFM) is employed to probe the 'nanofriction coefficient' to characterize the mobility of ILs at the solid interface, in which, the smaller the nanofriction coefficient, the faster are the ionic mobility and CO2 mass transfer. A monotonic and almost linear relationship for supported IL films is obtained between the resistance of CO2 mass transfer (1/k) and the nanofriction coefficient (µ), avoiding the controversy over the effect of supported IL film thickness on CO2 adsorption. The enhanced mass transfer of CO2 adsorption at IL-solid interfaces is observed at smaller resistance 1/k and friction coefficient µ. The low-friction driven local mobility (diffusion) of ILs at solid interfaces is enhanced, promoting the exchange mixing of the ILs adsorbing CO2 with the 'blank-clean' ions of the ILs, and thus accelerating the CO2 mass transfer. The proposed correlation links the nanoscale friction with the mass transfer of CO2 adsorption, providing a fresh view on the design of ultra-low frictional supported ILs for enhanced CO2 capture and separation processes.

Comparing the Thermal and Electrochemical Stabilities of Two Structurally Similar Ionic Liquids.

Here we focus on the thermal and variable temperature electrochemical stabilities of two ionic liquids (ILs) having a common tributyloctyl phosphonium cation [P4,4,4,8]+ and two different orthoborate anions: bis(mandelato)borate [BMB]- and bis(salicylato)borate [BScB]-. The thermo-gravimetric analysis data suggest that [P4,4,4,8][BScB] is thermally more stable than [P4,4,4,8][BMB] in both nitrogen atmosphere and air, while the impedance spectroscopy reveals that [P4,4,4,8][BScB] has higher ionic conductivity than [P4,4,4,8][BMB] over the whole studied temperature range. In contrast, the electrochemical studies confirm that [P4,4,4,8][BMB] is more stable and exhibits a wider electrochemical stability window (ESW) on a glassy carbon electrode surface as compared to [P4,4,4,8][BScB]. A continuous decrease in the ESWs of both ILs is observed as a function of operation temperature.

Rapid carbene formation increases ion diffusivity in an imidazolium acetate ionic liquid confined between polar glass plates.

1-Ethyl-3-methyl-imidazolium acetate ([EMIM][OAc]) is one of the most widely used ionic liquids for various applications. This study is focussed on the chemical stability of [EMIM][OAc] on the surfaces of polar glass plates. 1H and 13C NMR spectroscopy and NMR diffusometry of [EMIM][OAc] IL confined between glass plates with a specific surface area 105-106 m-1 are thoroughly investigated. A rapid and spontaneous reaction took place on the surfaces of glass plates leading to the formation of neutral chemical moieties as evident by the appearance of new signals in the 1H NMR spectra. These new products are assigned as N-heterocyclic carbene (NHC) and acetic acid. These neutral chemical moieties have significantly increased the ion diffusivity by dissociation of the cation and the anion in [EMIM][OAc] IL. The yield and rate of formation of NHC and acetic acid are found to increase with the increasing surface area of polar glass plates and the time of contact between the IL and glass surfaces. Based on NMR spectroscopy, a dissociative reaction mechanism is proposed for the formation of free NHC in the neat [EMIM][OAc] IL.

On the ionic liquid films 'pinned' by core-shell structured Fe3O4@carbon nanoparticles and their tribological properties.

A strongly 'pinned' ionic liquid (IL, [BMIM][PF6]) film on a silicon (Si) surface via carbon capsuled Fe3O4 core-shell (Fe3O4@C) nanoparticles is achieved, revealing excellent friction-reducing ability at a high load. The adhesion force is measured to be ∼198 nN at the Fe3O4@C-Si interface by the Fe3O4@C colloidal AFM tip, which is stronger than that at both Fe3O4@C-Fe3O4@C (∼60 nN) and IL-Si (∼10 nN) interfaces, indicating a strong 'normal pin-force' towards the Si substrate. The resulting strengthened force enables the formation of lateral IL networks via the dipole-dipole attractions among Fe3O4 cores. The observed blue shift of the characteristic band related to the IL anion in the ATR-FTIR spectra confirmed the enhanced interaction. The N-Si, P-O chemical bonds formed as a result of the IL interactions with the Si substrate confirmed by XPS spectroscopy suggested that the IL lay on the Si plane. This orientation is favorable for Fe3O4@C nanoparticles to exert 'normal pin-force' and press the IL film strongly onto surfaces. The IL ions/clusters are thus anchored by these Fe3O4@C 'pins' onto the substrate to form a dense film, resulting in a smaller interaction size parameter, which is responsible for the reduced friction coefficient µ.

Dynamic properties of imidazolium orthoborate ionic liquids mixed with polyethylene glycol studied by NMR diffusometry and impedance spectroscopy.

We used 1 H pulsed field gradient nuclear magnetic resonance to study the self-diffusion of polyethylene glycol (PEG) with average molecular mass of 200 and ions in mixtures of PEG with imidazolium bis(mandelato)borate (BMB) and imidazolium bis(oxalato)borate ionic liquids (ILs). The IL was mixed with PEG in the concentration range of 0-100 wt%. Within the temperature range of 295 to 353 K, the diffusion coefficient of BMB is slower than that of the imidazolium cation. The diffusion coefficients of PEG, as well as the imidazolium cation and BMB anions, differ under all experimental conditions tested. This demonstrates that the IL in the mixture is present in at least a partially dissociated state. Generally, increasing the concentration of PEG leads to an increase in the diffusion coefficients of PEG and both the ions and decreases their activation energy for diffusion. Nuclear magnetic resonance chemical shift alteration analysis showed that the presence of PEG changes the chemical shifts of both ions but in different directions. Impedance spectroscopy was used to measure the ionic conductivity of the ILs mixed with PEG. Copyright © 2017 John Wiley & Sons, Ltd.

High CO2 absorption capacity by chemisorption at cations and anions in choline-based ionic liquids.

The effect of CO2 absorption on the aromaticity and hydrogen bonding in ionic liquids is investigated. Five different ionic liquids with choline based cations and aprotic N-heterocyclic anions were synthesized. Purity and structures of the synthesized ionic liquids were characterized by 1H and 13C NMR spectroscopy. CO2 capture performance was studied at 20 °C and 40 °C under three different pressures (1, 3, 6 bar). The IL [N1,1,6,2OH][4-Triz] showed the highest CO2 capture capacity (28.6 wt%, 1.57 mol of CO2 per mol of the IL, 6.48 mol of CO2 per kg of the ionic liquid) at 20 °C and 1 bar. The high CO2 capture capacity of the [N1,1,6,2OH][4-Triz] IL is due to the formation of carbonic acid (-OCO2H) together with carbamate by participation of the -OH group of the [N1,1,6,2OH]+ cation in the CO2 capture process. The structure of the adduct formed by CO2 reaction with the IL [N1,1,6,2OH][4-Triz] was probed by using IR, 13C NMR and 1H-13C HMBC NMR experiments utilizing 13C labeled CO2 gas. 1H and 13C PFG NMR studies were performed before and after CO2 absorption to explore the effect of cation-anion structures on the microscopic ion dynamics in ILs. The ionic mobility was significantly increased after CO2 reaction due to lowering of aromaticity in the case of ILs with aromatic N-heterocyclic anions.

Ion dynamics in halogen-free phosphonium bis(salicylato)borate ionic liquid electrolytes for lithium-ion batteries.

This study was focused on the investigation of ion dynamics in halogen-free, hydrophobic, and hydrolytically stable phosphonium bis(salicylato)borate [P4,4,4,8][BScB] ionic liquid electrolytes for lithium-ion batteries. The structure and purity of the synthesized ionic liquid and lithium bis(salicylato)borate Li[BScB] salt were characterized using 1H, 13C, 31P, and 11B NMR spectroscopy. The Li[BScB] salt was mixed with an ionic liquid at the concentrations ranging from 2.5 mol% to 20 mol%. The physicochemical properties of the resulting electrolytes were characterized using thermal analysis (TGA and DSC), electrical impedance spectroscopy, and pulsed-field gradient (PFG) NMR and ATR-FTIR spectroscopy. The apparent transfer numbers of the individual ions were calculated from the diffusion coefficients of the cation and anion as determined via the PFG NMR spectroscopy. NMR and ATR-FTIR spectroscopic techniques revealed dynamic interactions between the lithium cation and bis(salicylato)borate anion in the electrolytes. The ion-ion interactions were found to increase with the increasing concentration of the Li[BScB] salt, which resulted in ionic clustering at the concentrations higher than 15 mol% of Li salt in the ionic liquid.