RESUMO
Transformations between different atomic configurations of a material oftentimes bring about dramatic changes in functional properties as a result of the simultaneous alteration of both atomistic and electronic structure. Transformation barriers between polytypes can be tuned through compositional modification, generally in an immutable manner. Continuous, stimulus-driven modulation of phase stabilities remains a significant challenge. Utilizing the metal-insulator transition of VO2, we exemplify that mobile dopants weakly coupled to the crystal lattice provide a means of imbuing a reversible and dynamical modulation of the phase transformation. Remarkably, we observe a time- and temperature-dependent evolution of the relative phase stabilities of the M1 and R phases of VO2 in an "hourglass" fashion through the relaxation of interstitial boron species, corresponding to a 50 °C modulation of the transition temperature achieved within the same compound. The material functions as both a chronometer and a thermometer and is "reset" by the phase transition. Materials possessing memory of thermal history hold promise for applications such as neuromorphic computing, atomic clocks, thermometry, and sensing.
RESUMO
The development of neuromorphic computing architectures based on two terminal filamentary resistance switching devices is limited in part by the high degree of variability in resistance states and switching voltages. Because of the large role filament shape plays in directing thermal and electric fields around the filament (and thus switching parameters), unambiguous knowledge of filament morphology resulting from direct characterization of filament shape is essential to solve critical ongoing challenges of device switching variability. Here, we have utilized a conductive atomic force microscopy scalpel technique to simultaneously scribe through a polycrystalline dielectric layer in formed Cu/HfO2/p+Si electrochemical metallization cell devices. Filament tomograms reveal that when conductive filaments are formed at typical bias conditions (4 V, 100 µA), a variety of filament shapes result, which deviate from the inverse conical shape predicted by the phenomenological electrochemical model. Furthermore, the observation of an increasing spectrum of damage which scales with forming voltage (associated with compliance current overshoot), and which is uncorrelated with electric field or oxide microstructure, supports the role of thermal pulses in expanding filaments, leading to irreversible dielectric breakdown structures at the extreme. Overall, these findings suggest that the original conductive filament shape can be highly varied as a result of thermally driven expansion from joule heating during the forming step, which is not explicitly accounted for in the widely accepted electrochemical model.
RESUMO
Variability remains the principal concern for commercialization of HfO2 based resistance switching devices. Here, we investigate the role of thermal processing conditions on internal structure of atomic layer deposited HfO2 thin films, and the impact of that structure on filament forming kinetics of p+ Si/HfO2/Cu and TiN/HfO2/Cu devices. Regardless of bias polarity or electrode metal, filament formation times are at least one order of magnitude shorter in polycrystalline than in amorphous films, which we attribute to the presence of fast ion migration along grain boundaries. Within polycrystalline films, filament formation times are correlated with degree of crystalline orientation. Inter-device variability in forming time is roughly equivalent across HfO2 film processing conditions. The kinetics of filament forming are shown to be highly dependent on HfO2 microstructure, with possible implications for the inter-device variability of subsequent switching cycles.
RESUMO
Stoichiometric salt hydrates can be inexpensive and provide higher volumetric energy density relative to other near-room-temperature phase change materials (PCMs), but few salt hydrates exhibit congruent melting behavior between 0 and 30 °C. Eutectic salt hydrates offer a strategy to design bespoke PCMs with tailored application-specific eutectic melting temperatures. However, the general solidification behavior and stability of eutectic salt hydrate systems remain unclear, as metastable solidification in eutectic salt hydrates may introduce opportunities for phase segregation. Here, we present a new family of low-cost zinc-nitrate-hexahydrate-based eutectics: Zn(NO3)2·6(H2O)-NaNO3 (Teu = 32.7 ± 0.3 °C; ΔHeu = 151 ± 6 J·g-1), Zn(NO3)2·6(H2O)-KNO3 (Teu = 22.1 ± 0.3 °C; ΔHeu = 140 ± 6 J·g-1), Zn(NO3)2·6(H2O)-NH4NO3 (Teu = 11.2 ± 0.3 °C; ΔHeu = 137 ± 5 J·g-1). While the tendency to undercool varies greatly between different eutectics in the family, the geologic mineral talc has been identified as an active and stable phase that dramatically reduces undercooling in Zn(NO3)2·6(H2O) and all related eutectics. Zn(NO3)2·6(H2O) and its related eutectics have shown stability for over a hundred thermal cycles in mL scale volumes, suggesting that they are capable of serving as robust and stable media for near-room-temperature thermal energy storage applications in buildings.
RESUMO
One of the challenges preventing wide use of inorganic salt hydrate phase change materials (PCMs) is their low viscosity above their melting point, leading to leakage, phase segregation, and separation from heat exchanger surfaces in thermal management applications. The development of a broad strategy for using polymers that provide tunable, temperature-reversible shape stabilization of a variety of salt hydrates by using the lowest possible polymer concentrations is hindered by differences in solubility and gelation behavior of polymers with change in the type of ion. This work addressed the challenge of creating robust, temperature-responsive shape-stabilizing polymer gels (i.e., salogels) using a low cost PCM, calcium chloride hexahydrate (CaCl2·6H2O, CCH). Due to the extremely high (9 M) concentration of chloride ions and the tendency to salting-out polymer chains, the previous strategy of using single-polymer salogels was not successful. Thus, this work introduced a strategy of using two polymers, poly(vinyl alcohol) and ultrahigh molecular weight polyacrylamide (PVA and PAAm, respectively), along with borax as a cross-linker to achieve temperature-reversible, shape-stable salogels. This system resulted in robust salogels whose gel-to-sol transition temperature (Tgel) was tunable within an application-relevant range of gelation temperature (30-80 °C). This behavior was enabled by a synergistic combination of dynamic covalent cross-links between PVA units and entanglements of PAAm chains which were combined into a single hybrid network. The hybrid salogels had <5 wt % polymer content, maintaining â¼95% of the heat of fusion of the pure PCM. Importantly, the noncovalent nature of gelation supported thermo-reversibility of gelation, shape stability, and retention of thermal properties over 50 melting/crystallization cycles.
RESUMO
We present soft-template encapsulation of salt hydrate phase change materials (PCMs) using modified silica particles to both stabilize emulsions and serve as initiators for organocatalyzed photoredox ATRP. The resulting core-shell structures have high core loading and are robust to thermal cycling. Critically, this strategy eliminates the need for a reagent in the core phase, thus preserving purity, and offers the ability to tailor shell composition for desired applications.
RESUMO
Future-generation neuromorphic computing seeks to overcome the limitations of von Neumann architectures by colocating logic and memory functions, thereby emulating the function of neurons and synapses in the human brain. Despite remarkable demonstrations of high-fidelity neuronal emulation, the predictive design of neuromorphic circuits starting from knowledge of material transformations remains challenging. VO2 is an attractive candidate since it manifests a near-room-temperature, discontinuous, and hysteretic metal-insulator transition. The transition provides a nonlinear dynamical response to input signals, as needed to construct neuronal circuit elements. Strategies for tuning the transformation characteristics of VO2 based on modification of material properties, interfacial structure, and field couplings, are discussed. Dynamical modulation of transformation characteristics through in situ processing is discussed as a means of imbuing synaptic function. Mechanistic understanding of site-selective modification; external, epitaxial, and chemical strain; defect dynamics; and interfacial field coupling in modifying local atomistic structure, the implications therein for electronic structure, and ultimately, the tuning of transformation characteristics, is emphasized. Opportunities are highlighted for inverse design and for using design principles related to thermodynamics and kinetics of electronic transitions learned from VO2 to inform the design of new Mott materials, as well as to go beyond energy-efficient computation to manifest intelligence.
RESUMO
Current thermally conductive and electrically insulating insulation systems are struggling to meet the needs of modern electronics due to increasing heat generation and power densities. Little research has focused on creating insulation systems that excel at both dissipating heat and withstanding high voltages (i.e., have both high thermal conductivity and a high breakdown strength). Herein, a polyelectrolyte-based multilayer nanocomposite is demonstrated to be a thermally conductive high-voltage insulation. Through inclusion of both boehmite and vermiculite clay, the breakdown strength of the nanocomposite was increased by ≈115%. It was also found that this unique nanocomposite has an increase in its breakdown strength, modulus, and hydrophobicity when exposed to elevated temperatures. This readily scalable insulation exhibits a remarkable combination of breakdown strength (250 kV/mm) and thermal conductivity (0.16 W m-1 K-1) for a polyelectrolyte-based nanocomposite. This dual clay insulation is a step toward meeting the needs of the next generation of high-performance insulation systems.
RESUMO
HYPOTHESIS: Encapsulation of ionic liquids (ILs) and phase change materials (PCMs) can overcome limitations associated with bulk materials, e.g., slow mass transfer rates, high viscosities, or susceptibility to external environment. Single step soft-templated encapsulation methods commonly use interfacial polymerization for shell formation, with a multifunctional monomer in the continuous phase and another in the discontinuous phase, and thus do not give pristine core material. We posit that polymer precipitation onto emulsion droplets in non-aqueous emulsions could produce a robust shell without contamination of the core, ideal for the encapsulation of water-sensitive or water-miscible materials. EXPERIMENTS: Solutions of commodity polymers were added to the continuous phase of non-aqueous Pickering emulsions stabilized by alkylated graphene oxide (GO) nanosheets such that the change in solubility of the polymer led to formation of robust shells and the production of capsules that could be isolated. FINDINGS: We demonstrate that a polymer precipitation approach can produce capsules with pristine core of the IL 1-ethyl-3-methylimidazolium hexafluorophosphate [Emim][PF6] or the salt hydrate PCM magnesium nitrate hexahydrate (MNH) and shell of nanosheets and polystyrene, poly(methyl methacrylate), or polyethylene. The capsules are approximately 80 wt% [Emim][PF6] or >90 wt% MNH, and the core can undergo multiple cycles of solidification and melting without leakage or destruction. This novel, single-step methodology provides a distinct advantage to access capsules with pristine core composition and is amenable to different core and shell, paving the way for tailoring capsule composition for desired applications.
RESUMO
The metal-to-insulator transition of VO2 underpins applications in thermochromics, neuromorphic computing, and infrared vision. Ge alloying is shown to elevate the transition temperature by promoting V-V dimerization, thereby expanding the stability of the monoclinic phase to higher temperatures. By suppressing the propensity for oxygen vacancy formation, Ge alloying renders the hysteresis of the transition exquisitely sensitive to oxygen stoichiometry.
RESUMO
In an effort to protect metal substrates from extreme heat, polymer-clay multilayer thin films are studied as expendable thermal barrier coatings. Nanocomposite films with a thickness ranging from 2 to 35 µm were deposited on steel plates and exposed to the flame from a butane torch. The 35 µm coating, composed of 14 deposited bilayers of tris(hydroxymethyl)aminomethane (THAM)-buffered polyethylenimine (PEI) and vermiculite clay (VMT), decreased the maximum temperature observed on the back side of a 0.32 cm thick steel plate by over 100 °C when heated with a butane torch. Upon exposure to high temperature, the polymer and amine salt undergo pyrolysis and intumesce, subsequently forming a char and blowing gas. The char encases the nanoclay platelets, and a ceramic bubble is formed. The macro-scale bubble, in tandem with the nanocomposite coating properties, increases resistance to heat transfer into the underlying metal substrate. This heat shielding behavior occurs through radiative effects and low aggregate through-plane conductivity resulting from multilayer nanodomains and intumesced porosity (i.e., conduction through the gas as the film expands to form a ceramic bubble). These relatively thin and lightweight films could be used to protect important metal parts (in automobiles, aircraft, etc.) from fire-related damage or other types of transient high-temperature situations.
RESUMO
The design of multifunctional alloys with multiple chemical components requires controllable synthesis approaches. Physical vapor deposition techniques, which result in thin films (<1 µm), have previously been demonstrated for micromechanical devices and metallic combinatorial libraries. However, this approach deviates from bulk-like properties due to the residual stress derived in thin films and is limited by total film thickness. Here, we report a route to obtain ternary Ni-Mn-Sn alloy thick films with controllable compositions and thicknesses by annealing electrochemically deposited multi-layer monatomic (Ni, Mn, Sn) films, deposited sequentially from separate aqueous deposition baths. We demonstrate (1) controllable compositions, with high degree of uniformity, (2) smooth films, and (3) high reproducibility between film transformation behavior. Our results demonstrate a positive correlation between alloy film thicknesses and grain sizes, as well as consistent bulk-like transformation behavior.
RESUMO
In this paper, we report on n-alkyl phosphonic acid (PA) self-assembled monolayer (SAM)/hafnium oxide (HfO(2)) hybrid dielectrics utilizing the advantages of SAMs for control over the dielectric/semiconductor interface with those of high-k metal oxides for low-voltage organic thin film transistors (OTFTs). By systematically varying the number of carbon atoms of the n-alkyl PA SAM from six to eighteen on HfO(2) with stable and low leakage current density, we observe how the structural nature of the SAM affects the thin-film crystal structure and morphology, and subsequent device performance of low-voltage pentacene based OTFTs. We find that two primary structural factors of the SAM play a critical role in optimizing the device electrical characteristics, namely, the order/disorder of the SAM and its physical thickness. High saturation-field-effect mobilities result at a balance between disordered SAMs to promote large pentacene grains and thick SAMs to aid in physically buffering the charge carriers in pentacene from the adverse effects of the underlying high-k oxide. Employing the appropriate n-alkyl PA SAM/HfO(2) hybrid dielectrics, pentacene-based OTFTs operate under -2.0 V with low hysteresis, on-off current ratios above 1 x 10(6), threshold voltages below -0.6 V, subthreshold slopes as low as 100 mV dec(-1), and field-effect mobilities as high as 1.8 cm(2) V(-1) s(-1).